Same Old Import Problem

I've put this thread up ages ago but I still have the problem and I am hoping someon e might justr be able to help. This is the problem: I cannot import audio into AU1.5. I can record in real time but can't use the Audio/Import action in the program. I get the attached error message. I ahve gone through all the settings and checked them with another computer that imports with no problems whatsoever and everything seems to match up.
Here is what I am using: A Dell Inspiron Lapton 1300; an external DVD drive LITEON EZ-DUB; an external Audio card - USB 7.1 CH3D. I only put the external audio card in in case the problem was with the built in audio card on the laptop's motherboard but it doesn't make any difference.
I am nearly losing what little hair I have left on this one and would really appreciate some feedback
Many thanks
Nikwak

ryclark wrote:
Well it may have been in FAQs before this site's software was changed and previous FAQs lost.
None of the actual FAQs are lost - they are all on the AudioMasters forum (except the ones I haven't finished editing yet, which is about three of them). But I don't recall seeing one about this, I have to say. The closest I can get (and this may be relevant, because I don't think it affects just ripping) is this one.

Similar Messages

Same old logoff problem but new scenario

HI,
I login into portal from Internet Explorer and click on logoff and it works fine.
now, I go to windows explorer (windows button + E, not Internet Explorer) and type my portal url and login and then click on logoff, it doesnt logoff. also when i close that explorer and open a new session and type the url, by default it logs me in.
anybody faced this problem and any sap notes out there?
IE 6.0 SP2
EP 6.0 SP15
please help
Thanks

Srinu,
Yep you are correct, but its not me, but few end users got used to opening window explorer to browse the internet and they face this wierd problem when they browse SAP EP.
could you please check it in your installation, if it is behaving the same way, if you have one though?
Thanks
Reddy

Same old font problem..installed fonts not displaying..

I have been searching everywhere for a resolution to this problem, and while it's reported frequently, and there are various suggestions, I haven't found anything that works. Any advice would be appreciated.
The problem is that fonts that are installed on my computer do not display in Indesign but they do in other windows applications. Even more bizarre, Photoshop displays some of the ones that Indesign doesn't, but not all. In this particular case (although I am discovering other fonts) the main ones that are missing that are HUGHLY problematic are Arial Narrow and Arial Narrow Bold!!!
Information:
Using Windows Vista...did have to install a new harddrive, and I don't think this has worked properly since I did that, but did work on original harddrive. However, had the same problem on an XP machine a few years ago.
Indesign CS3...have verified that I have all updates.
Have deleted the fntcache.dat in windows and recreated it...no luck.
I tried copying the fonts to the Adobe font folder...still didn't work.
Installed FontValidator (from Windows I think) and ran it against my Arial files. It does show some errors/warning but I don't know what they mean. Several 'calculations didn't match...'. I can get the logs if this will help anyone.
Installed a font manager X-Fonter and have been loading/unloading and installing/uninstalling the fonts. I've moved fonts to external drives and deleted them. Anything I can think of in this arena..no luck.
I copied my Arial font files from an XP machine to the VISTA machine and again...no luck.
I apologize that I believe that this issue has been discussed to death, but nothing. I submitting a report to Adobe, but don't have high hopes of having a response. Any one know what to do with this? Is there a real way to tell if a font is corrupted?
thanks in advance!

I had to do a few extra things after applying the hotfix to resolve this issue on my PC (XP SP2 & CS3).
First, I followed the suggested workaround found at: http://indesignsecrets.com/hotfix-corrects-arial-narrow-problem-on-windows.php
Pointed browser to: http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=956514&kbln=en-us
Downloaded hotfix "2007 Microsoft Office System".
Ran hotfix.
Searched hard disk for adobefnt*.lst and deleted all files found.
I performed these steps and still had no results. I tried a few things, but the following steps are what finally resolved the issue:
Navigated to the Windows\Fonts folder.
Selected the following files and did Edit/Copy
Arial (TrueType)
Arial Bold (TrueType)
Arial Bold Italic (TrueType)
Arial Italic (TrueType)
Arial Narrow (TrueType)
Arial Narrow Bold (TrueType)
Arial Narrow Bold Italic (TrueType)
Arial Narrow Italic (TrueType)
Navigated to C:\Program Files\Adobe\Adobe InDesign CS3\Fonts
Did an Edit/Paste to paste the fonts into that folder.
(There was a file there called AdobeFnt11.lst; apparently it wasn't found in the global search on my hard disk, so I just deleted it.)
Navigated to C:\Program Files\Common Files\Adobe\Fonts
Did an Edit/Paste to paste the fonts into this folder as well.
For some reason I had to paste the new fonts (applied in the hotfix) into both of the folders above before it would work.
Anyway, for what it's worth, this resolved the issue on my PC.

Same old doc problem. startManagedWebLogic.cmd mentions startWebLogicManaged.cmd

Look in: startManagedWebLogic.cmd
and you will see it mentions: startWebLogicManaged.cmd
Small thing... just shows how confusing the name is ;)
How about: startWLSAdmin.cmd and startWLSManaged.cmd or something.
Dion
CustomWare Training
http://www.customware.com/
[email protected]

Or, for NT, add:
set SCRIPT_NAME=%~n0
and just use %SCRIPT_NAME% in place of the hard-coded name.
Do I win a T-Shirt?
"Dion Almaer" <[email protected]> wrote:
>
Look in: startManagedWebLogic.cmd
and you will see it mentions: startWebLogicManaged.cmd
Small thing... just shows how confusing the name is ;)
How about: startWLSAdmin.cmd and startWLSManaged.cmd or something.
Dion
CustomWare Training
http://www.customware.com/
[email protected]

Hi there i am having a problem here i had an old id when i created my account but my credit card expired and i had put a new info but after that i have changed my apple id as well but now whenever i open anything the same old email id popped up how can i

Hi there i am having a great problem here i had an old id when i first made my apple id but at that time my credit card info was different and now i have chaged my credit card info because it got expired.my problem is that even though i have changed my apple id the same old one always pops up and ask for a password and i ont hat id anymore how can i change my id on the main icloud setting page please slove my problem it is bothering me alot and my icloud is not backing up anymore how can i replace my new apple id to an old one please help me.
Thanks
Ayesha

OK ..... Did you sign into your new ID in Settings>iTunes and App Stores>Apple ID. Tap your old ID and sign out and then sign in with the new ID.

My brother ipad was linked with old apple id and he forgot his id and never use same email.the problem now his mini ipad ask him for this id to open (activate ipad) what we can do ?

my brother ipad was linked with old apple id and he forgot his id and never use same email.the problem now his mini ipad ask him for this id to open (activate ipad) what we can do ?

He remember the id name and password but he can't enter we don't now if the password is wrong or the id was lock . I have the all thing for the ipad such as his box . I now this is security thing but you could help me.

Linkification (any version) does not work with FF9.0.1. Here we go again! Same old problem. Why don't you guys develop a permanent fix??!!! Don

Here we go again. Same old problem with FF updates. FF9.x.x will not allow clickable internet links. They are dead when typed. ALL IE versions have clickable links BUILT IN! Why can't you do it??? Don't blame it on "third party add on incompatiblity." It's not their fault. It is YOUR fault for not including it. Do not blame users either.
xpi files are not compatible with FF9.x.x even when dragged on to it

'''''Linkification''''' was not developed by Mozilla.
*The third party developer appears to have abandoned the Add-on (no longer updates it).
*The last update available on the Mozilla Firefox Add-ons site ( https://addons.mozilla.org/en-US/firefox/addon/linkification/ ) was made compatible only through Firefox 3.6.x
*The developer posted version 1.3.9 on his/her own site which was made compatible through Firefox 4
*'''''Read the comments section on the Add-ons page for suggestions.'''''
**I would NOT download from another site as you do not know what you might be getting.
**You can install the following and force compatibility in Add-ons > Extensions
***https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=ss
**Under "Reviews", click "See all ###user reviews". The suggestion ''by marwn098 on November 11, 2011'' is the only one that I would recommend.
***Link to that suggestion --> https://addons.mozilla.org/en-US/firefox/addon/linkification/reviews/321220/
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

TS2998 Same old problem, Apple vs. Cox

Same old problem with Mountain Lion using Cox server. Can receive email in MAC MAIL but not connect to send. Fix?
All settings are per Cox support information.

Please help with sorting out the issues with the Cox email services? Sorry; I'm just not that powerful.
If you're set up per the published specs (and those aren't easy to find), then Cox (mail or doc or the Cox network) is probably broken. What's posted at various of the Cox support sites indicates that the SMTP send path is either TCP 587 with SSL/TLS enabled or TCP port 465 with SSL/TLS enabled. Cox does appear to use different SMTP mail servers, depending on your service class and your particular geographic location. Cox also appears to use POP and not IMAP, and specifically uses POP3 Port 995 on pop.cox.net; that's the SSL/TLS port for POP3.
What to do? Work with someone that you can share your credentials with, verify the error, and (if it can't be resolved) contact Cox and work through this error with them.
Or as an alternative, don't use Cox for your mail. I deliberately chose a mail hosting provider, and not the ISP I work with, for mail services. That mail hosting move was easily very affordable, and the mail provider quickly answers the (few) support tickets I've needed very promptly. In other words, the ISP deals with the network wiring, and the mail hosting provider deals with the mail servers. And mail works.
Or yes, you can use Google or another (free) mail provider, but - and with the providers of any of the free services in general - getting support when something goes weird is far from certain.

Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

Have new MC544LL/A and same old problem"The ipod cannot be synced. A duplicate filename was specified."Is this a "apple or Itune" problem?

I fought this problem for WEEKS with no success. iTunes on Windows 7 x64. I tried running it as Administrator. I tried every fix I could find here and on Youtube and nothing. Any time I was in iTunes and switched focus to another Window like Outlook or something it would pop this error message up again. I reinstalled iTunes from scratch. This did NOT fix it, but it gave me a clue. I figured it had to be my iTunes library which is stored on an external HD.
After poking around in the library for a while I thought it might be a file that had been set to Read Only so I did an "attrib -r e:\itunes /s" to clear all of them all. This wasn't the problem but it alerted me to a file it couldn't clear. The file was iT.tmp and it couln't clear that because the file was corrupt. I deleted it but that still didn't fix it.
I finally did a "chkdsk e:\itunes /f" and let it run through. It found the error in iT.tmp, fixed it and now iTunes works fine again.

The same old Character Palette problem

Yep. I've got the same old Character Palette problem. Running Mac OS X 10.4.10, all the latest updates, checked the forums for all the help I could find, and tried everything, and still every **** time I sign in or come back from sleep, the character palette shows up!

hey, husayndas
i'm currently having this exact same thing happen!!
could you outline exactly how you managed to turn the palette off?
much appreciated!

Imovie Mac importing problem or Camcorder problem?

I run a small business for kids parties. I video the kids dancing along to a track they have recorded (played on a cd player). Then i import the video, turn off the camcorder sound and import the finished mixed track of their singing and sync the picture and audio together. This has been working perfectly for over a year. But unfortunately in the last month when i try to sync up the audio track with the video, it starts off synced up perfectly, but gradually as the video goes on the video and audio become out of sync and by the end the video is either too fast or too slow. this is a huge problem! I thought it may the tapes in the video camera so i changed them and it's still doing it. Is this a video camera problem or computer importing problem. Can anyone help as it's ruining the kids DVDs!

I am surprised it has ever worked. That can normally only be done with synched professional equipment. Maybe they changed the CD player at the performance and the old one happened to play at the same rate as your Mac when it imports? (There is a slight difference between the playback speed between different players)
Or perhaps your video camera has become slightly worn, so it pulls the tape slower?
There are endless possibilities for problems with your setup.
I think you should take a look at the "add scaled" tip at the bottom here:
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
(Instead of adding the extracted audio from iMovie, you should add the CD audio.)

CS5 Windows import problems (ppj, avi)

I have the CS5 Master Collection installed on a Windows 7 Ultimate 64-bit laptop. I have some old Premiere 6.5 projects that I wanted to open/import.
When I first tried this, I could open the ppj files and make prproj files from them, either by double-clicking on the ppj file name or by importing the ppj in to a new prproj, but the video files within the ppj didn't import properly. Premiere Pro CS5 said, "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." These video files are paired avi and wav files captured from mini-DV tape using Premiere 6.5 under Windows XP Pro. A sample check of one of my avi files with GSpot includes these results:
The codec section says (among other stuff)
     codec: dvsd
     Name: DVC/DV Video
     Status: Codec(s) are Installed
The container section says
     File length correct
     DV Type 2 AVI
     OpenDML (AVI v2.0)
     DV Audio/Video: 748 MB (97.63%)
     AVI Overhead: 18.1 MB (2.37%)
When I tried more recently, Premiere CS5 does not include ppj under "All Supported Media" in the import dialogue box. I can open Bridge from Premiere and browse to a ppj file, but when I double-click the file name, I get the error message, "File format not supported." If I try to open the ppj directly rather than import it, instead of trying to run a conversion as it did initially, Premiere CS5 gives me the welcome to Adobe Premiere Pro popup without actually doing anything w/ the ppj. I'm not sure whether a Premiere update ran between the first and more recent attempts to import ppj files, but I now have version 5.0.3.
Does anyone have suggestions for how to make this work?
Thanks.

I had the same problem with an old ppj project.
The option to import was available pbut CS5 would crash when import was invoked.
There was an error message about video filters.
Adobe help line, over the course of an hour, tried to make me believe that this was related to the 64 bit vs 32 bit issues.
Then I pointed out to them that the application was able to read the .avi file and play it if I imported it by itself without trying to import the whole project.
I also mentioned that deleting the previews made no difference.
At the end of the hour, they agreed to look at the project file. This was two weeks ago and this is the last time that I heard from them. When I ftp'ed the file to them they confirmed the following which I also told them; this is a separate problem from the import problem, but it is related to the support of this software. The automatic updates to the program cause Adobe .ppj import options to disappear from the import menu file type list. Again, they confirmed this and I had to unistall the whole package, reinstall Adobe, and not accept any updates.
I have yet to hear from Adobe on this. I suspect this is such a rare need that they feel they don't need to support it, but this being the case I think the doofs ought to take the feature out of the advertising list, or provide a stand alone utility to translate the text .ppj into a .prpj compatible project. It's not very difficult.
The most disturbing thing is that they obviously fail to do a thorough regression test prior to publishing updates. Basic features that are advertised are failing.
THE SOLUTION (for my case)
Of course, the reason I wanted to import the project was because there was aOne of the key reasons to stay with Premiere is that I am used to it and want compatibility, as the others in this post also would like.
Besides Adobe being of no help at all, I have found a workaround. As you all know the ppj file is a text file with headers in [ ] brackets. This file contained some headers which did not appear in .prpj created projects and this was due to some special effects add-ins which were bundled with the video card I installed in the old system.
By removing the special effects using the old version of Premiere installed on a 32 bit system, I was able to import all the clips with the NLE cuts as I intended, and continue from there in CS5.
I hope this is a viable workaround for some.
I do not know if Adobe plans to continue to support the import feature, but they ought to update their docs. It does not work.
Edwin

My original apple id is not an email address . I bought iCloud memory via that same account no problem. When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address . Made new account but can you change originalI'

My original apple id is not an email address .
I bought iCloud memory via that same account no problem.
When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address .
Made new account as per instruction ie [email protected] works fine
BUT as I want to utilise the money spent on the additional memory it would be great to use the initial account set up as my primary HOWEVER as far as I have tried the initial apple ID CANNOT be changed. Bit confused actually any usefull guidance will be greatly appreciated. Thanks

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
lmerchant wrote:
My new phone has an old apple ID associated with iCloud only. I cannot delete the account as it has "Find my iPhone" turned on.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Same Old Import Problem

Similar Messages

Maybe you are looking for