Same output
I am working on a paper layout report, If i make changes to it and place it on server, it still runs the old report, but if I run it next day then it shows the correct result or the changed report.
How can I fix this, any idea please. i am using run_object_report and web.show_ducment on 10g.
Thanking you and best regards,
sounds like a caching issue.
1. what output format do you use (pdf, html) ? if its not pdf, try the same logic with output format pdf (run old report, change something, deploy, try again).
2. Delete the report-file (or rename it) on the server and rerun the report. Is there still a result displayed.
3. Have a look at the reports-console and see if your report-request is logged there
http://<mymachine>:<myport>/reports/rwservlet/showjobs?server=<myserver>hope this helps
Similar Messages
-
How to alter Select Query while altering selectionscreen for same output?
Hi,
i have to change the selection screen fields with some new fields , but i dont know how to change the selection query accordingly, because i need the same output with the same fields but with a different set of fields in the selection screen.
The original code is
TYPES: BEGIN OF ty_output,
mblnr TYPE mseg-mblnr,
mjahr TYPE mseg-mjahr,
zeile TYPE mseg-zeile,
bwart TYPE mseg-bwart,
werks TYPE mseg-werks,
lgort TYPE mseg-lgort,
ebeln TYPE mseg-ebeln,
ebelp TYPE mseg-ebelp,
lfbnr TYPE mseg-lfbnr,
lfpos TYPE mseg-lfpos,
sjahr TYPE mseg-sjahr,
dmbtr TYPE mseg-dmbtr,
menge TYPE mseg-menge,
matnr TYPE mseg-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
bismt TYPE mara-bismt,
meins TYPE mara-meins,
bedat TYPE ekko-bedat,
waers TYPE ekko-waers,
wkurs TYPE ekko-wkurs,
verkf TYPE ekko-verkf,
EFFWR TYPE EKPO-EFFWR,
tax TYPE ekpo-effwr,
maktx TYPE makt-maktx,
budat TYPE mkpf-budat,
usnam TYPE mkpf-usnam,
m_menge TYPE ekpo-menge,
ablad TYPE mseg-ablad,
wempf TYPE mseg-wempf,
END OF ty_output.
TYPES: BEGIN OF ty_mseg_103,
mblnr TYPE mseg-mblnr,
mjahr TYPE mseg-mjahr,
zeile TYPE mseg-zeile,
bwart TYPE mseg-bwart,
werks TYPE mseg-werks,
lgort TYPE mseg-lgort,
ebeln TYPE mseg-ebeln,
ebelp TYPE mseg-ebelp,
lfbnr TYPE mseg-lfbnr,
lfpos TYPE mseg-lfpos,
sjahr TYPE mseg-sjahr,
dmbtr TYPE mseg-dmbtr,
menge TYPE mseg-menge,
matnr TYPE mseg-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
bismt TYPE mara-bismt,
meins TYPE mara-meins,
bedat TYPE ekko-bedat,
waers TYPE ekko-waers,
wkurs TYPE ekko-wkurs,
verkf TYPE ekko-verkf,
EFFWR TYPE EKPO-EFFWR,
tax TYPE ekpo-effwr,
maktx TYPE makt-maktx,
budat TYPE mkpf-budat,
usnam TYPE mkpf-usnam,
m_menge TYPE ekpo-menge,
ablad TYPE mseg-ablad,
wempf TYPE mseg-wempf,
END OF ty_mseg_103.
TYPES: BEGIN OF ty_mseg_105,
mblnr TYPE mseg-mblnr,
mjahr TYPE mseg-mjahr,
zeile TYPE mseg-zeile,
bwart TYPE mseg-bwart,
werks TYPE mseg-werks,
lgort TYPE mseg-lgort,
ebeln TYPE mseg-ebeln,
ebelp TYPE mseg-ebelp,
lfbnr TYPE mseg-lfbnr,
lfpos TYPE mseg-lfpos,
sjahr TYPE mseg-sjahr,
dmbtr TYPE mseg-dmbtr,
menge TYPE mseg-menge,
matnr TYPE mseg-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
bismt TYPE mara-bismt,
meins TYPE mara-meins,
bedat TYPE ekko-bedat,
waers TYPE ekko-waers,
wkurs TYPE ekko-wkurs,
verkf TYPE ekko-verkf,
effwr TYPE ekpo-effwr,
tax TYPE ekpo-effwr,
maktx TYPE makt-maktx,
budat TYPE mkpf-budat,
ablad TYPE mseg-ablad,
wempf TYPE mseg-wempf,
END OF ty_mseg_105.
DATA: Begin with W_ *
DATA : it_fcat TYPE slis_t_fieldcat_alv. " alv field catalog
DATA : listhead TYPE slis_t_listheader WITH HEADER LINE.
DATA: event TYPE slis_t_event WITH HEADER LINE.
INTERNAL TABLES: Begin with IT_ *
DATA : it_output TYPE STANDARD TABLE OF ty_output WITH KEY mblnr mjahr,
it_mseg_103 TYPE STANDARD TABLE OF ty_mseg_103,
it_mseg_105 TYPE STANDARD TABLE OF ty_mseg_103,
it_mseg_106 TYPE STANDARD TABLE OF ty_mseg_103, " LNTDEV1 ADDED
it_mara TYPE STANDARD TABLE OF ty_mara,
it_ekko TYPE STANDARD TABLE OF ty_ekko,
it_ekpo TYPE STANDARD TABLE OF ty_ekpo,
it_makt TYPE STANDARD TABLE OF ty_makt,
it_mkpf TYPE STANDARD TABLE OF ty_mkpf WITH KEY mblnr.
WORKAREAS: Begin with WA_ *
DATA : wa_fcat LIKE LINE OF it_fcat.
DATA : wa_output LIKE LINE OF it_output,
wa_mara LIKE LINE OF it_mara,
wa_ekko LIKE LINE OF it_ekko,
wa_ekpo LIKE LINE OF it_ekpo,
wa_makt LIKE LINE OF it_makt,
wa_mkpf LIKE LINE OF it_mkpf,
wa_mseg_103 LIKE LINE OF it_mseg_103,
wa_mseg_105 LIKE LINE OF it_mseg_105,
wa_mseg_106 LIKE LINE OF it_mseg_106. " LNTDEV1 ADDED
DATA : w_menge LIKE ekpo-menge.
FIELD-SYMBOLS: Begin with FS_ *
PARAMETERS: Begin with PR_ *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS : pr_werks LIKE mseg-werks OBLIGATORY.
SELECT-OPTIONS : so_budat FOR mkpf-budat.
SELECTION-SCREEN END OF BLOCK b1.
SELECT-OPTIONS: Begin with SO_ *
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
SELECT-OPTIONS : so_mtart FOR mara-mtart.
SELECT-OPTIONS : so_matkl FOR mara-matkl.
SELECT-OPTIONS : so_matnr FOR mara-matnr.
SELECT-OPTIONS : so_bismt FOR mara-bismt.
SELECT-OPTIONS : so_ebeln FOR mseg-ebeln.
SELECT-OPTIONS : so_verkf FOR ekko-verkf.
SELECT-OPTIONS : so_bedat FOR ekko-bedat.
SELECT-OPTIONS : so_mblnr FOR mseg-mblnr.
SELECTION-SCREEN END OF BLOCK b2.
*AT SELECTION-SCREEN.
*SO_BUDAT-HIGH = SO_BUDAT-HIGH + 1.
Query for getting all the Document Segment: Material data from MSEG *
Table which having Movement Types 103 and put into it_mseg table, *
Filtering by reference document and material document number *
Filtering by selection criteria (Material Docu No, Purchase order *
and Plant) *
START-OF-SELECTION.
SELECT pmblnr smblnr p~mjahr zeile bwart lfbnr werks lgort ebeln
ebelp lfpos sjahr dmbtr usnam menge sbudat pmatnr q~mtart
pablad pwempf
FROM mseg AS p INNER JOIN mara AS q
ON pmatnr = qmatnr
JOIN mkpf AS s ON smblnr EQ pmblnr
INTO CORRESPONDING FIELDS OF
TABLE it_mseg_103
WHERE bwart EQ 103
AND p~matnr IN so_matnr
AND werks EQ pr_werks
AND ebeln IN so_ebeln
AND q~mtart IN so_mtart
AND p~mblnr IN so_mblnr
AND s~budat IN so_budat.
IF sy-subrc = 0.
ENDIF.
SELECT pmblnr smblnr p~mjahr zeile bwart lfbnr werks lgort ebeln
ebelp lfpos sjahr dmbtr usnam menge sbudat pmatnr q~mtart
pablad pwempf
FROM mseg AS p INNER JOIN mara AS q
ON pmatnr = qmatnr
JOIN mkpf AS s ON smblnr EQ pmblnr
INTO CORRESPONDING FIELDS OF
TABLE it_mseg_105
WHERE bwart EQ 105 OR bwart EQ 104 OR bwart EQ 124 OR bwart EQ 124
AND p~matnr IN so_matnr
AND werks EQ pr_werks
AND ebeln IN so_ebeln
AND q~mtart IN so_mtart
AND p~mblnr IN so_mblnr
AND s~budat IN so_budat.
IF sy-subrc = 0.
ENDIF.
LOOP AT IT_MSEG_103 INTO WA_MSEG_103.
READ TABLE IT_MSEG_105 INTO WA_MSEG_105 WITH KEY LFBNR =
WA_MSEG_103-MBLNR.
IF SY-SUBRC <> 0.
APPEND WA_MSEG_103 TO IT_OUTPUT.
ENDIF.
ENDLOOP.
SELECT pmblnr smblnr p~mjahr zeile bwart lfbnr werks lgort ebeln
ebelp lfpos sjahr dmbtr usnam menge sbudat pmatnr q~mtart
pablad pwempf
FROM mseg AS p INNER JOIN mara AS q
ON pmatnr = qmatnr
JOIN mkpf AS s ON smblnr EQ pmblnr
INTO CORRESPONDING FIELDS OF
TABLE it_mseg_106
WHERE bwart EQ 106
AND p~matnr IN so_matnr
AND werks EQ pr_werks
AND ebeln IN so_ebeln
AND q~mtart IN so_mtart
AND p~mblnr IN so_mblnr
AND s~budat IN so_budat.
LOOP AT it_mseg_103 INTO wa_mseg_103.
READ TABLE it_mseg_106 INTO wa_mseg_106 WITH KEY
lfbnr = wa_mseg_103-mblnr.
IF sy-subrc = 0.
APPEND wa_mseg_106 TO it_output.
clear wa_mseg_106.
ENDIF.
ENDLOOP.
Present selection criteria is
1. Plant
2. Posting Date
3. Material Type
4. Material Group
5. Material No.
6. Old Material No.
7. PO Order No.
8. Old PO No.
9. PO Date
10. Material Document No.
New selection criteria is
1. PO no.
2. PO date
3. PO value (Ex: >=10000 <=50000)
4. Purch org
5. Doc type
6. Vendor
7. Material
8. Account assignment category
9. OrderHi,
i have to change the selection screen fields with some new fields , but i dont know how to change the selection query accordingly, because i need the same output with the same fields but with a different set of fields in the selection screen.
The original code is
TYPES: BEGIN OF ty_output, mblnr TYPE mseg-mblnr, mjahr TYPE mseg-mjahr, zeile TYPE mseg-zeile, bwart TYPE mseg-bwart, werks TYPE mseg-werks, lgort TYPE mseg-lgort, ebeln TYPE mseg-ebeln, ebelp TYPE mseg-ebelp, lfbnr TYPE mseg-lfbnr, lfpos TYPE mseg-lfpos, sjahr TYPE mseg-sjahr, dmbtr TYPE mseg-dmbtr, menge TYPE mseg-menge, matnr TYPE mseg-matnr, mtart TYPE mara-mtart, matkl TYPE mara-matkl, bismt TYPE mara-bismt, meins TYPE mara-meins, bedat TYPE ekko-bedat, waers TYPE ekko-waers, wkurs TYPE ekko-wkurs, verkf TYPE ekko-verkf, * EFFWR TYPE EKPO-EFFWR, tax TYPE ekpo-effwr, maktx TYPE makt-maktx, budat TYPE mkpf-budat, usnam TYPE mkpf-usnam, m_menge TYPE ekpo-menge, ablad TYPE mseg-ablad, wempf TYPE mseg-wempf, END OF ty_output. TYPES: BEGIN OF ty_mseg_103, mblnr TYPE mseg-mblnr, mjahr TYPE mseg-mjahr, zeile TYPE mseg-zeile, bwart TYPE mseg-bwart, werks TYPE mseg-werks, lgort TYPE mseg-lgort, ebeln TYPE mseg-ebeln, ebelp TYPE mseg-ebelp, lfbnr TYPE mseg-lfbnr, lfpos TYPE mseg-lfpos, sjahr TYPE mseg-sjahr, dmbtr TYPE mseg-dmbtr, menge TYPE mseg-menge, matnr TYPE mseg-matnr, mtart TYPE mara-mtart, matkl TYPE mara-matkl, bismt TYPE mara-bismt, meins TYPE mara-meins, bedat TYPE ekko-bedat, waers TYPE ekko-waers, wkurs TYPE ekko-wkurs, verkf TYPE ekko-verkf, * EFFWR TYPE EKPO-EFFWR, tax TYPE ekpo-effwr, maktx TYPE makt-maktx, budat TYPE mkpf-budat, usnam TYPE mkpf-usnam, m_menge TYPE ekpo-menge, ablad TYPE mseg-ablad, wempf TYPE mseg-wempf, END OF ty_mseg_103. TYPES: BEGIN OF ty_mseg_105, mblnr TYPE mseg-mblnr, mjahr TYPE mseg-mjahr, zeile TYPE mseg-zeile, bwart TYPE mseg-bwart, werks TYPE mseg-werks, lgort TYPE mseg-lgort, ebeln TYPE mseg-ebeln, ebelp TYPE mseg-ebelp, lfbnr TYPE mseg-lfbnr, lfpos TYPE mseg-lfpos, sjahr TYPE mseg-sjahr, dmbtr TYPE mseg-dmbtr, menge TYPE mseg-menge, matnr TYPE mseg-matnr, mtart TYPE mara-mtart, matkl TYPE mara-matkl, bismt TYPE mara-bismt, meins TYPE mara-meins, bedat TYPE ekko-bedat, waers TYPE ekko-waers, wkurs TYPE ekko-wkurs, verkf TYPE ekko-verkf, effwr TYPE ekpo-effwr, tax TYPE ekpo-effwr, maktx TYPE makt-maktx, budat TYPE mkpf-budat, ablad TYPE mseg-ablad, wempf TYPE mseg-wempf, END OF ty_mseg_105. *----------------------------------------------------------------------* * DATA: Begin with W_ * *----------------------------------------------------------------------* DATA : it_fcat TYPE slis_t_fieldcat_alv. " alv field catalog DATA : listhead TYPE slis_t_listheader WITH HEADER LINE. DATA: event TYPE slis_t_event WITH HEADER LINE. *----------------------------------------------------------------------* * INTERNAL TABLES: Begin with IT_ * *----------------------------------------------------------------------* DATA : it_output TYPE STANDARD TABLE OF ty_output WITH KEY mblnr mjahr, it_mseg_103 TYPE STANDARD TABLE OF ty_mseg_103, it_mseg_105 TYPE STANDARD TABLE OF ty_mseg_103, it_mseg_106 TYPE STANDARD TABLE OF ty_mseg_103, " LNTDEV1 ADDED it_mara TYPE STANDARD TABLE OF ty_mara, it_ekko TYPE STANDARD TABLE OF ty_ekko, it_ekpo TYPE STANDARD TABLE OF ty_ekpo, it_makt TYPE STANDARD TABLE OF ty_makt, it_mkpf TYPE STANDARD TABLE OF ty_mkpf WITH KEY mblnr. *----------------------------------------------------------------------* * WORKAREAS: Begin with WA_ * *----------------------------------------------------------------------* DATA : wa_fcat LIKE LINE OF it_fcat. DATA : wa_output LIKE LINE OF it_output, wa_mara LIKE LINE OF it_mara, wa_ekko LIKE LINE OF it_ekko, wa_ekpo LIKE LINE OF it_ekpo, wa_makt LIKE LINE OF it_makt, wa_mkpf LIKE LINE OF it_mkpf, wa_mseg_103 LIKE LINE OF it_mseg_103, wa_mseg_105 LIKE LINE OF it_mseg_105, wa_mseg_106 LIKE LINE OF it_mseg_106. " LNTDEV1 ADDED DATA : w_menge LIKE ekpo-menge. *----------------------------------------------------------------------* * FIELD-SYMBOLS: Begin with FS_ * *----------------------------------------------------------------------* *----------------------------------------------------------------------* * PARAMETERS: Begin with PR_ * *----------------------------------------------------------------------* SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME. PARAMETERS : pr_werks LIKE mseg-werks OBLIGATORY. SELECT-OPTIONS : so_budat FOR mkpf-budat. SELECTION-SCREEN END OF BLOCK b1. *----------------------------------------------------------------------* * SELECT-OPTIONS: Begin with SO_ * *----------------------------------------------------------------------* SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME. SELECT-OPTIONS : so_mtart FOR mara-mtart. SELECT-OPTIONS : so_matkl FOR mara-matkl. SELECT-OPTIONS : so_matnr FOR mara-matnr. SELECT-OPTIONS : so_bismt FOR mara-bismt. SELECT-OPTIONS : so_ebeln FOR mseg-ebeln. SELECT-OPTIONS : so_verkf FOR ekko-verkf. SELECT-OPTIONS : so_bedat FOR ekko-bedat. SELECT-OPTIONS : so_mblnr FOR mseg-mblnr. SELECTION-SCREEN END OF BLOCK b2. *AT SELECTION-SCREEN. * *SO_BUDAT-HIGH = SO_BUDAT-HIGH + 1. *---------------------------------------------------------------------* * Query for getting all the Document Segment: Material data from MSEG * * Table which having Movement Types 103 and put into it_mseg table, * * Filtering by reference document and material document number * * Filtering by selection criteria (Material Docu No, Purchase order * * and Plant) * *---------------------------------------------------------------------* *---------------------------------------------------------------------* START-OF-SELECTION. *---------------------------------------------------------------------* SELECT p~mblnr s~mblnr p~mjahr zeile bwart lfbnr werks lgort ebeln ebelp lfpos sjahr dmbtr usnam menge s~budat p~matnr q~mtart p~ablad p~wempf FROM mseg AS p INNER JOIN mara AS q ON p~matnr = q~matnr JOIN mkpf AS s ON s~mblnr EQ p~mblnr INTO CORRESPONDING FIELDS OF TABLE it_mseg_103 WHERE bwart EQ 103 AND p~matnr IN so_matnr AND werks EQ pr_werks AND ebeln IN so_ebeln AND q~mtart IN so_mtart AND p~mblnr IN so_mblnr AND s~budat IN so_budat. ** IF sy-subrc = 0. ENDIF. SELECT p~mblnr s~mblnr p~mjahr zeile bwart lfbnr werks lgort ebeln ebelp lfpos sjahr dmbtr usnam menge s~budat p~matnr q~mtart p~ablad p~wempf FROM mseg AS p INNER JOIN mara AS q ON p~matnr = q~matnr JOIN mkpf AS s ON s~mblnr EQ p~mblnr INTO CORRESPONDING FIELDS OF TABLE it_mseg_105 WHERE bwart EQ 105 OR bwart EQ 104 OR bwart EQ 124 OR bwart EQ 124 AND p~matnr IN so_matnr AND werks EQ pr_werks AND ebeln IN so_ebeln AND q~mtart IN so_mtart AND p~mblnr IN so_mblnr AND s~budat IN so_budat. IF sy-subrc = 0. ENDIF. LOOP AT IT_MSEG_103 INTO WA_MSEG_103. READ TABLE IT_MSEG_105 INTO WA_MSEG_105 WITH KEY LFBNR = WA_MSEG_103-MBLNR. IF SY-SUBRC 0. APPEND WA_MSEG_103 TO IT_OUTPUT. ENDIF. ENDLOOP. SELECT p~mblnr s~mblnr p~mjahr zeile bwart lfbnr werks lgort ebeln ebelp lfpos sjahr dmbtr usnam menge s~budat p~matnr q~mtart p~ablad p~wempf FROM mseg AS p INNER JOIN mara AS q ON p~matnr = q~matnr JOIN mkpf AS s ON s~mblnr EQ p~mblnr INTO CORRESPONDING FIELDS OF TABLE it_mseg_106 WHERE bwart EQ 106 AND p~matnr IN so_matnr AND werks EQ pr_werks AND ebeln IN so_ebeln AND q~mtart IN so_mtart AND p~mblnr IN so_mblnr AND s~budat IN so_budat. LOOP AT it_mseg_103 INTO wa_mseg_103. READ TABLE it_mseg_106 INTO wa_mseg_106 WITH KEY lfbnr = wa_mseg_103-mblnr. IF sy-subrc = 0. APPEND wa_mseg_106 TO it_output. clear wa_mseg_106. ENDIF. ENDLOOP.
Present selection criteria is 1. Plant 2. Posting Date 3. Material Type 4. Material Group 5. Material No. 6. Old Material No. 7. PO Order No. 8. Old PO No. 9. PO Date 10. Material Document No. New selection criteria is 1. PO no. 2. PO date 3. PO value (Ex: >=10000 <=50000) 4. Purch org 5. Doc type 6. Vendor 7. Material 8. Account assignment category 9. Order
I hope the code is readable now.
Thanks in advance. -
Hi,
is it possible to create 2 condition records for the same output type BA00 but i want it to be transmitted to 2 different medium.
eg: 1 - print
6 - EDI
now i am unable to do so. I am defining my output via sales org.
but when i enter 2 records of OR doc type with different medium, i get any error
"The condition is being p rocessed in the current session. A condition record with the same variable key is already being
processed."
thanks
dylHi,
It is not possible to maintain 2 condition records with the same document type with different medium... System says its currently processed, if needed you can change the current record with the medium........
Alternatively yu can simply copy and create a new condition type with ref to BA00 and maintain the different medium...
Reward if helpful...
Regards
Bageerath -
The same output message for different partner roles
Hi All,
Is it possible to create automaticaly in PO the same output message type ( for example - 'mail') for different partner roles( for example - 'VN' and 'OA') ?
If it's possible,then how?
Thanks.
LizaHi,
Thank you ,but I have a next problem:
When I tried in transaction mn05 to add second record for the same output type for other partner roles.
I got error message "The condition record entered already exists".
Regards,
L. -
Two print programs using the same output type in t-code v/40
Hi,
I am trying to use the same Output type RD00 to print diferent forms.
In t-code v/40 we can fill a second Processing but how this work?
Can someone tell me more about this?
The final goal is to print diferent forms according to different companies.
Thank you and best regards
João FernandesHi,
It is not possible to have 2 different routines to be assigned to one output type in the procedure. I think when you say 2 routines, you are saying 2 logics or you are saying the subroutines KOBED and KOBEV of the routine.
In all reqmt routines, which is in discussion now, only one of the subroutines will be always called, though I dont know unfortunately which one is this. As you said, that only one of your processing logic works, that is the right subroutine area where the second logic should also be coded. So please move your code from the inactive subroutine area to the active subroutine area. Now you should be able to see both the validations being active.
Hope this helps. If the case is different, please let us know. -
Two printers need to be setup for same output type
Dear Experts
How do we create condition records for two different printers in VV61 with same output type and packing material type?
Thanks in advance for your answers.
Regards
Bala3)
The configuration helps to redetermine the printer.
F1 help for the field:
"Description of print profile
By specifying a print profile, the printers for output processing are redetermined. You can, for example, assign the printers of a specific packing station to a print profile.
Using the parameter "PPT", you can individually define the print profile in the user parameters."
Please note that you also have to maintain the profile for each user.
2)
You have to make yourself familiar with SAP's condition technique.
http://wiki.scn.sap.com/wiki/display/ERPLO/output+determination+using+condition+technique
(You will need a condition table in which one key field is the plant and assign it to the output type through an access sequence) -
Help required: Two smartforms for same output type?
Dear All,
I have a requirement to display bill of lading for a shipment.
The shipment usually contains two kinds of materials.
The data to be displayed for the first set of materials data is different from what is
displayed for the second set/kind of materials. The layout(columns and structure) is entirely
different. But the user wants to see the two sets of data in two pages, (for the same output type).
But, from what I know, we can only associate one smartform to an output type.
Any inputs.
Thanks.Hi
V/30, just check your output type, if you click on form and routines there is option assigning multiple programs and forms (i,e, Upto 5).
Have not tried it , you can try and let us know your feedback
Regards
Jitesh -
Hi,
I have used the Switch condition in BPM to determine the receiver from the IDOC.
1) I am getting the same output(same content) for both the receivers though i have given the filter condition in the BPM.
2) In SXMB_MONI i get 3 messages, the first message says "Message Branched" and the other 2 are successful messages.
Any tips on where i could have gone wrong?
Thanks,
TirumalTirumal,
This problem may be because of the namespace in the Incoming Message. Check the XPATH in the COndition Editor. Or redo once again and activate.
BPM payload value reading problem
Still Switch is not working properly , then you may need to do dummy Interfaces and Mapping to check this.
Hope this helps,
regards,
Moorthy -
Same output type gets generated twice when we create PO
Hi,
I have a problem. When I create PO the same output type ZEA gets generated twice. It should come only once. What could be the problem?
Please give me some pointers.
Regards
PurvaHi
goto the PO in ME22N
goto Messages
select the Output type and check the settings in Communication Method and Further data about the messages etc and other print parameters
Regards
Anji -
Same output type getting triggered twice upon saving the document
Dear SDNers,
I have a shipment Document.
Upon saving it the same Output type gets generated twice. ( in a gap of 1 second)
Clarification needed:
1. Please guide as to where i need to look for the error as to why same output is getting triggered twice simultaneously( gap of 1 second).
2. i have checked in the processing routine associated with it. Is it the right place?
P.S. I had posted another similar thread. Closed it since i felt it lacked clarity.
Regards,
SuryaD.Hi,
Fetch the data from Nast table for that document number
Check the vstat . if it is 0 then use the below function module.
CALL FUNCTION 'RV_MESSAGE_SET_PROCESS_STATE'.
Then it will update the existing single record for the first time .
Next time on wards you will get the multiple records for te document in the Nast table.
For that you need to change the VSTAT status as per the requirement.
Hope this might solve your problem.
With Regards,
Sumodh.P -
Bash function/script to execute multiple commands on same output
Occasionally, I come across the need to pass the output of a single command to multiple others (without piping each to the next), so today, I wrote a [very] simple Bash script to accomplish the task. Piping the output of a command to `tree' is much like piping it to `tee', except `tree' allows you to execute multiple commands on the same output, rather than only writing to log files:
#!/bin/bash
# tree -- pipes the output of one command to >= 1 other
# Usage: command | tree 'command 1' 'command 2'
doc=$( cat - )
for arg in "$@"; do
bash -c "${arg}" <<EOF
${doc}
EOF
done
An example of its usage:
$ echo -e "1 2 3\n4 5 6" | tree 'grep 1' 'grep 4' "grep 1 | tee grep.log | awk '{print \$2}'"
1 2 3
4 5 6
2
$ cat grep.log
1 2 3
Though not elaborate, the script gets the job done.
Last edited by deltaecho (2009-03-10 20:34:01)Xyne wrote:
You could always call it "the Ukrainian Pipe"
(if you can't laugh at this, you either need to loosen up or make a point to follow (annual) current events)
That was a good one -
Invoice Print and Email from same output type
Hi All,
We want to print invoice and send an email to customer. Can this be acheived using same output type??
If yes, plz guide how can we do this..
I check some queries in forums but they had coding etc. Can we do it with config??
Regards,
Satish.I'm not sure why you wouldn't configure two output types. However, you can do this with one output type in a number of ways:
1. Use a speciial function output (transmission medium 8).
This allows you to write ABAP code to anything you want. However, you have to manage print contols on yur own as the special function transmssion medium doesn't allow you to specify these on he condition record.
2. Change the driver program for the print output for the output to send emails.
You would need to handle the email routing on your own because the output records for print are just for printing. -
Both equii join and natural join are equall.will both display same output
both equii join and natural join are equall.will both display same
output?Hi ,
What is preventing you to do a small test and check yourself?
See the below link.
http://psoug.org/reference/joins.html
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CREATE TABLE parents (
2 person_id NUMBER(5),
3 adult_name VARCHAR2(20),
4 comments VARCHAR2(40))
5 PCTFREE 0;
Table created.
SQL>
SQL> CREATE TABLE children (
2 parent_id NUMBER(5),
3 person_id NUMBER(5),
4 child_name VARCHAR2(20),
5 comments VARCHAR2(40))
6 PCTFREE 0;
Table created.
SQL>
SQL> INSERT INTO parents VALUES (1, 'Dan', 'So What');
1 row created.
SQL> INSERT INTO parents VALUES (2, 'Jack', 'Who Cares');
1 row created.
SQL> INSERT INTO children VALUES (1, 2, 'Anne', 'Who Cares');
1 row created.
SQL> INSERT INTO children VALUES (1, 1, 'Julia', 'Yeah Right');
1 row created.
SQL> INSERT INTO children VALUES (2, 1, 'Marcella', 'So What');
1 row created.
SQL> COMMIT;
Commit complete.
SQL>
SQL> SELECT adult_name, child_name
2 FROM parents NATURAL JOIN children;
ADULT_NAME CHILD_NAME
Jack Anne
Dan Marcella
SQL> select adult_name,child_name from parents a, children b
2 where a.person_id=b.person_id;
ADULT_NAME CHILD_NAME
Jack Anne
Dan Julia
Dan Marcella
SQL> ed
Wrote file afiedt.buf
1 select adult_name,child_name from parents a, children b
2* where a.person_id=b.parent_id
SQL> /
ADULT_NAME CHILD_NAME
Dan Anne
Dan Julia
Jack Marcella
SQL>Regards,
Avinash -
Print same output to all printers
i am using :
import java.awt.*;
import javax.swing.*;
import java.awt.print.*;
import java.awt.image.BufferedImage;
import java.awt.geom.Rectangle2D;
public class PrintUtilities extends Thread{
public static final double MM_TO_PAPER_UNITS = 1/25.4*72;
public static double widthA4 = 210*MM_TO_PAPER_UNITS;
public static double heightA4 = 297*MM_TO_PAPER_UNITS;
public static double leftMargin = 4.0*MM_TO_PAPER_UNITS;
public static double topMargin = 4.0*MM_TO_PAPER_UNITS;
public void run()
//setDaemon(true); // this thread will not keep the app alive
print();
private Component[] componentsToBePrinted;
public static void printComponent(Component c) {
new PrintUtilities(c).print();
public static void printComponents(Component[] c){
new PrintUtilities(c).print();
public PrintUtilities(Component componentToBePrinted) {
this(new Component[]{componentToBePrinted});
public PrintUtilities(Component[] components){
this.componentsToBePrinted = components;
public void print() {
PrinterJob job = PrinterJob.getPrinterJob();
PageFormat pf = job.defaultPage();
pf.setOrientation(PageFormat.PORTRAIT);
Paper paper = pf.getPaper();
paper.setSize(widthA4, heightA4);
paper.setImageableArea(leftMargin,topMargin,widthA4-2*leftMargin,heightA4-2*topMargin);
pf.setPaper(paper);
job.setCopies(1);
// job.setCopies(PrinterJob.getPrinterJob().getCopies());
Book bk = new Book();
for(int i=0;i<componentsToBePrinted.length;i++){
System.out.println("APPENDING THE FOLLOWING DOC NUMBER: "+i);
// disableDoubleBuffering(componentsToBePrinted);
bk.append((Printable)componentsToBePrinted[i],pf);
//enableDoubleBuffering(componentsToBePrinted[i]);
job.setPageable(bk);
//TODO pass an appropriate/specific name for the print job
job.setJobName("Mobile Report Print Forms");
if (job.printDialog()) {
try {
job.print();
} catch (PrinterException e) {
System.out.println(e);
/** The speed and quality of printing suffers dramatically if
* any of the containers have double buffering turned on.
* So this turns if off globally.
* @see enableDoubleBuffering
public static void disableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(false);
/** Re-enables double buffering globally. */
public static void enableDoubleBuffering(Component c) {
RepaintManager currentManager = RepaintManager.currentManager(c);
currentManager.setDoubleBufferingEnabled(true);
i am getting different output on different printers as well. I have classes defined as Printeable that draw forms, each form has 75 questions and they are all done using graphics2D some printer prints all the pages perfectly some other with different margin and on a laser printer i get only one box.
If it helps someone, for testing, i printed to file (.prn) and read the ouput through Red Titan it's free
it showed me one box out of 76
just the first one ????
possible solution that would help for margin
http://java.sun.com/developer/JDCTechTips/2004/tt0611.html
i used book and send printeable class and appended them into the book class
i am dying to solve this problem and wondering if there is better way for testing and how to make all pages
compatible for all printers. I want my program to send all forms to printer same format same size
is there any suggestion?? what am i doing wrong?
by the way
bk.append((Printable)componentsToBePrinted[i],pf);
componentsToBePrinted[] is an array of classes that implements Printeable and they all draw the forms correctly and sends to the printer. It is working mostly but i needed to work on alll printers no exceptions
I appreciate any help and i will issue all my duke starts im new to posting in the forum but i will give all my points for this tip
PLEASE HELPI want my program to send all forms to printer same format same size is there any suggestion??Produce a PDF... effectively delegating printing there-of to someone else. Problem solvered.
Your PDF options are (AFAIK) FOP or itext.
Cheers. Keith. -
FlowN invoking the same output vairable
Hi there,
This is a little difficult to explain.
I have a process that takes in document information including multiple reviewers for the douments.
At one point in the process i need to set up multiple threads against the number of reviewers in the document information (It is a variable number of reviewers).
This was my plan:
Set up a FlowN that counts the number of reviewer nodes. Then inovoke a askReviewer Web service and wait for their reply asynchronously.
It's working! I'm using a bit of Java Exec to receive the flowN varialbe, from there find the reviewer name then send over the document info with the reviewer name.
BUT:
The reviewer name doesn't change on the output of the invoke. I am debugging the Java and it is susccessfully picking up the correct reviewers. But basically the same XML is being sent to the webservice.
I have a couple of questions, is a FlowN a true thread? Are the variables replicated across each thread, so they are seperate or are they shared?.
There is no doubt that a pick would be the best option for this design, but i can't allocate this dynamically (variable amount of reviewers.)
I hope this explained well!
It'll be great to hear of anybody who has tried the same thing.embarrasing stuff, i'm replying to my own thread an hour later.
I fixed it and it was pretty obvious.
The key is that the webservice i call uses input and output variables which are global to the process. Therefore although the flow is threaded the global variables are not.
so it's just a case of creating a scope inside your flow process, then assigning the invoke web service variables as local scope variables. therefore on each thread a new variable is created!
Superb. -
Need to print same outputs at different printers
Is there any way we could have the output directed to a different printer. A sales order confirmation output needs to print at printer ABC for user Sam, and printer xyz for user Jude. What configuration change would allow printing of outputs at user specific printer.
Any suggestionsif it is printing immediately , yes it is possible. In the user profile( T Code SU01) have default printer assigned , which ever you want to print for specific user and click on output immediately. when the order is saved then it will print to the printer maintained in the user profile.
If batch program , then itwill be difficult
Regards
Sai
Maybe you are looking for
-
Flex mobile projet using air = 3.5
Hi everyone, My issue is quiet simple to explain : I can't create a "Tabbed Application" using the Air sdk version 3.5 or later. Using Flash builder 4.6 or 4.7, the issue is the same : 1/ New flex mobile project : OK 2/ Selecting Tabbed Application :
-
The program closes without warning, while I am working in the program
I just purchased the Acrobat DC software... The program closes without warning, while I am working in the program
-
Hi! is possible use left join and right join syntax in oracle 8i otherwise (+) syntax?
-
How to select and cut only foter part of a swf flash from template, or any zone all the movie.
I have a template with flash menu. I would like to keep the rest and to delete only some zones, those with menus. This is happent often to me, I know to edit the movie,text,pictures, but I fail to resize the movie only for the zone I need it and save
-
Can't open PDF. Message says reader closing
When I open a PDF I get a message on screen that says Reader is closing. Tried to uninstall/install and doesn't help.