Same TREX server for KM indexing and e-Recruitment

Hi,
Is it possible to use the same TREX server for KM indexing on the portal and e-Recruiting searches on R/3?
Many thanks
Jane

Hi,
in general and from a technical view it's possible.
But it depends on the load of the applications, perhaps it's a better approach to separate them e.g. for a productive environment.
Regards, Thorsten

Similar Messages

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • HT204053 i used the same apple id for my iphone and my husbands now all our contacts and such are on both phones how do i fix this.  I dont need his contacts on my phone and the other way also.  Should i create a different icloud account for his phone?

    I used the same apple id for my iphone and my husbands now all our contacts and such are together.  How do I undo this?  Do i create him a different icloud account? 

    Yes, start with deleting your account on his device:
    (Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)
    In the next step, create a new account on his device:
    (Settings > iCloud or Settings > Mail, Contacts, Calendar > Your Account)

  • Hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac?

    hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac pictures instead? thanks

    Did you go into Settings > Store and then tap your old ID, sign out and then enter your new ID?

  • If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well?  I'm not sure of the advantage of using teh same iCloud for both devices.

    If I use the same iCloud account for my ipad and iPhone, will changes I make on one change on the other as well?  I'm not sure of the advantage of using teh same iCloud for both devices.

    No, it only mirrors changes to synced data.  This includes mail, contacts, calendars, reminders, safari bookmarks, notes, iWork documents and data, and photo stream photos (assuming you choose to sync all this data).  Changes to iTunes data such as music, apps, podcasts, etc., are not synced using iCloud.  In your example, if you delete an app from one device it will remain on the other until deleted there too.

  • VF01 Determine Billing date for billing index and printout to current date

    Hi
    we need to determine the Billing date for billing index and printout to current date
    What can I do to determine automatically at the time of creation current day to Billing date for billing index and printout?
    please let me know
    Best Regards,

    Hi Beatriz ,
    You have two options here. you can chose either of these solutions:
    1.
    A. T-Code: VTFL ( if using del related billing)   For the billing document and delivery, at item level assign the copying requirement 011 or if you are currently using some other routine then you can use following in that
    VBRK-FKDAT = SY-DATUM.
    B. T-code VTFA (if using order related billing)
    Similar to A, using copying requirement 011.
    2. You may also try option of Checking in the User Exit for the Program RV60AFZA & RV60AFZA.
    Please let us know if this helps
    Regards
    Harpreet

  • I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? C

    I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can  do? Can someone answer in German?

    I suspect you will want to ask your question at the forum for Adobe Digital Editions which is eBook, eBook reader device focused.
    Be well...

  • How to Setup deducated server for FR Repoting and Consolidation

    Hi experts,
    We have an issue where running FR reports slow down HFM for users. We were thinking of dedication 1 server for FR reporting and another for consolidation. I read the 9.3.1 manual and it says it is possible to do that. However, no steps were provided.
    Can anyone please shed some light on the steps we need to perform ?
    Thnaks a lot for your help in advance

    >
    Hello!
    I have downloaded the SPARC ISOs for Solaris 9 from
    sun.com, and I have tried many times to set up Install
    server (Solaris 9) for SPARC machines on an Intel PC,
    but I always get the following error.
    I take it you're running solaris x86 on that intel pc?
    bash-2.05#
    /cdrom/cdrom0/Solaris_9/Tools/setup_install_server
    /export/home/sol-sparc/
    ERROR: Install boot image
    /cdrom/cdrom0/Solaris_9/Tools/Boot does not exist
    Check that boot image exists, or use [-t] to
    specify a valid boot image elsewhere.
    bash-2.05# If you do a "cd /cdrom/cdrom0/Solaris_9/Tools/" and then do an "ls" do you see the Boot directory? Is there anything in that directory? That's the software 1/2 CD you're running that command from right?
    Thanks,
    Daryl

  • HT204053 for ipad2 Using the same Apple ID for Store purchases and iCloud (recommended) yes/

    hi i am shahram i have ipad2 for ipad 2 using the same apple iD for store purchases and iCloud(recommended) yes or no?

    That's what Apple recommend, it's also how I have mine set up. Although it isn't much of a problem to use a different account (ID) for each service.

  • Snow leopard server for net boot and software updates only what needs to be running to use it?

    Snow leopard server for net boot and software updates only what needs to be running to have it work right?

    Netboot and Software Update, at its simplest.  Mac OS X Server also expects to have functional IP networking and DNS services (somewhere) on the LAN (and if you're behind a NAT gateway, then the DNS server(s) are on your LAN and not out at your ISP), or things get weird.  SUS (usually) works out of the box, outside of cases where there's an outbound firewall.  Netboot can be more effort to setup, in terms of what you're loading into the clients.

  • The same KM repository (File Server) for Portal DEV and Portal PRD

    Hello,
    I want to know if it is possible to configure in two different portals, one repository in each Portal Server making reference to the same File Server Folder. It's possible?
    Regards
    SU

    Hi SU,
    It is possible but I would recommend read only access to the files.  A FS repository can becomes inconsistent if the file system files are changed outside of the portal.  You can run "CM Repository File System Check" to fix inconsistencies but why risk it?
    Best regards,
    Duncan

  • Trex server for E-recruting

    Hi SDN,
    Below are the Trex Scenarion for E-recuriting.
    Our prodution server and Trex servers are differents.
    We want connectivity from Internet for search from external environment ( From web).
    1.kindly suggest, where i have to made the changes ?
    2.Which port is used to connect from web ?
    3.I want the connectivity configration details. ?
    4.Whether the http works for external connectivity for accessing the Trex server ?
    where i want to change this settings on trex server or prodution server.
    Please suggest.
    Thanks.
    Ravi

    Siddesh......T h a n k s ........M a n......for your replies....
    Really what i want to say thru that message number is - i followed the same - but i was not succeed to use TREX in e-Recruitment system.
    The error is - The indexed docuemnts are not poping up / traced up in a general search of e-Rec scenario.
    For the same i am requesting you all experts  - end to end config step by step - in TREX Server and e-Recruitment Server.
    Rgds

  • How to set up a server for PPro editing (and AE finishing)?

    Hello everyone,
    I may be a bit offtopic with this question, but at the same time it's really related to PPro.
    I never worked in any post-house facility, and I come from a very indy background, so I never had a chance to see any edit suite hook up to a server.
    I am wondering how great it is, how it could help our projects? And also what are the basics to know, the stuff to avoid when you're a newbie like me (in term of server network settings)?
    Right now, we're running 3 Mac Pros to edit our projects. They are all connected through Gigabit ethernet.
    Our workflow involves that all Mac have the entire footage in there own drives. We're using the network only when importing new content to copy it on the 2 other Machines.
    We found out that if we use Mac #1 to open a PPro project contained within Mac #2 drives (as well as the footage), it's okay but the performances are not as great as opening a project in its own drives.
    So we try to copy (move) the projects in the right Mac before to work on it. Of course, everytime, we have to relink everything if we don't want Mac #1 to read the footage from Mac #2…
    When it come to big projects, with lots of Red footage, it is a pain, and we usually end up using only one master machine for the edit, and it's only when it comes to finish in AE that we really start to split the project onto the 3 platforms.
    So this is where the idea of a server comes in mind. Mac #1 would work on a project A, then when moving to work on project B, Mac #2 could open project A and keep working on it - no relink: the project AND the footage are all on the server.
    That is my basic idea. Sound simple, but really I have no idea if it really works. Is it something I can really do on a server?
    How the server really helps to keep the performance? If I see PPro's performance lowering down when accessing projects and footage from our actual simple network, is it going to be better accessing the same datas from a dedicated server.
    I'm looking at the Mac Mini server with Lion Server. What Lion Server does that Lion OS doesn't do already?
    I know, it sounds like completely newbie questions, but I honestly have no idea.
    Can a Mac Mini with Lion Server serve the 3 Macs running Snow leopard? Or do we need to update them?
    My idea is to use Pegasus thunderbolts for storage drives, plugged in the Mac Mini, then plug all the 3 Mac into the Mac Mini, with what I believe should be Gigabit Ethernet…
    Am I right? A least a bit? What did I miss?
    Thanks in advance for sharing your knowledge guys
    Julien

    If you are going DIY route, this is your only option: http://magazine.creativecow.net/article/build-your-own-affordable-san-that-iworksi
    However that probably won't work with RED footage.

  • One TREX server for multiple Portals?

    I have the same requirement as that contained in this thread:
    TRex for Multiple Portals
    I wonder if anyone can technically elaborate a bit what the procedure for this configuration.
    I would have to install a TREX and create a TREX instance for each Portal that I want to give TREX service?
    Each instance points to a different host?
    My requirement is to use the same TREX to both DEV and QA Portal hosts.
    Any suggestions would be appreciated. !!
    regards,
    Leandro.

    Hi Leandro,
    For your requirement this document describes the TREX installation -
    [TREX with Multiple Instances|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6be60cc5cfd]
    Hope this helps,
    Reward points if helpful
    Regards,
    Shailesh Nagar

Maybe you are looking for