Same WAD Template to be used for different queries and dataprovider

Hi All,
I want to create a WAD template that cound be use by 100 more queries.
Making setting in SPRO or RSCUSTV27 will make it a default template for all the queries.
I only want the template to be used for say MM module(100 queries).
Any way it can be done?
Please help.
Thanks
Vinay

Hi Vin Loh,
I assume your requirement as this:
Case 1: You have N querie(s) on several infoproviders in your case MM module, and that you would like to display all the queries in a single WAD report? You can do it! Its a feasible solution.
Goto WAD > Insert a 2 X 2 table > In the (1,1) box insert a drop down box. In the (1,2) You may add a Title of type 'Text' > In the (2,1) box you may add a 'Navigational Pane' > In the (2,2) cell add the 'Analysis Grid' > Create a Dataprovider DP_1 referencing any frequently accessed query. As of now a template has been created, which can be modified as accordance to suit your requirements.
Now, once done, goto the dropdown box settings. This DDBox's main objective is to give you acess to all the N queries in your MM module. Goto 'Web Item Params' > Choose the 'Data Binding' option > Edit Parameter > In the 'Data Binding Type' choose 'QUERY VIEW' > Goto the 'Selection of Query Views' > Check the option 'Specify List of Query Views' > Under 'Single Entry in DD...' choose Initial State as QUERY; Not QUERYVIEWS > Choose your N queries as listed here. No need to create N different DPs or N different reports.
Here, your iView is of type ..TEMPLATE=ZTEST.. for WAD based reports; not ..QUERY=ZTEST...
Guess it will resolve your issue.
Case 2: You wish to create a BEx template for all your existing MM queries as run on BEx Web based analyzer? In this case you need to check on the KM config. In the portal you have the Imported iViews templates.
Thanks,
Arun Bala

Similar Messages

Can the same IIS web server be used for Web Enrollment and AIA and CDP?

I'm designing a PKI for my company and will need a web server accessible from outside for doing web enrollment as well as for publishing CRLs and AIAs. Can this be the same server?
Can anyone point me to a good article on how to set this up?
Thank you.
Kenny

yes, you can use the same web server to host CRT and CRL files. And there is nothing complex to create the site. Just create a web site and point it to a folder that contains your files, or add a virtual folder to existing web site.
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.

Authorisations in BW for different Queries and one InfoObject

Hi,
we have a problem regarding Authorisations in BW.
Some of our users have different rights on different queries e.g. for the Info-Object 0PLANT. For the query ABC he should see data to more plants than for the query XYZ.
Our idea was to build an Authorisation-Object containing 0PLANT, TCTQUERY, TCTIFAREA and TCT ICUBE and to set the authorization for 0PLANT regarding the detailled name of the query (TCTQUERY). But this doesn't work because when starting the query SAP doesn't check the name of the Query. And so the user can always see the sum of plants set in both authorisations.
Maybe someone of you has useful hints.

Hi Andreas,
In your case you need to use hierarchical authorizaton object to provide data restriction on the queries. Thus everyone can have the same query and they view what ever they are supposed to. Please find the how to document called: "How ToWork With Hierarchy Authorizations" You will find detalied information and businees scenario about the topic. Please let me know if I can assist you further
Regards

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

Template or Spreadsheet used for mappingu0085

Hi All
I am trying to figure out mapping of idoc to flat file structure. Flat file exists in industry standards. I want a template used for mapping fields.Is there any standard template(spread sheet)used for mapping.
Kindly send me the template to my mail id: [email protected]
Thanks and Regards
Gowri Komma

Hi,
chk out these links
Mapping Template
http://help.sap.com/saphelp_nw04/helpdata/en/79/2835b7848c458bb42cf8de0bcc1ace/frameset.htm
/people/swaroopa.vishwanath/blog/2005/03/13/mapping-template-in-xi--inbound-delivery-from-idoc
regards
jithesh

Need Different Selection screen for different Queries in a Workbook

Hi,
I have created a workbook with Multiple tabs in BI 7.0. Each Tab has different Queries and each query has different Selection screens (Variable Selections).
When i open the workbook and refresh it, the selection screen is appearing only for one query. All the queries are refreshed by this single selection screen, though each query has different Variable selections. What i need is a seperate selection screen i.e seperate Variable selection appearing for each queries, when i refresh each one of them.
Is it possible to do this? If anybody has tried this, help me in solving this issue. Thanks for ur time.
Regards,
Murali

Murali,
If you un-check the 'Display Duplicate Variables Only Once' this WILL solve your problem.
When you Refresh, you should be presented with a single variable selection dialog box, but it should contain an area for each Query (DataProvider) that is embedded in the Workbook.
This is the case if the queries are all on the same tab, or on different tabs.
However, if you have multiple tabs each with a query on it, each query must have it's own DataProvider. If all queries are based on the same DataProvider, it will not work as the Workbook only 'sees' one Query for which it needs variable input.
If you REALLY want multiple variable selection dialog boxes, then maybe the best way to do this is to have the queries in separate Workbooks.
If you don't want the User to have to open 5 queries manually, you could use a Macro in each Workbook that runs on opening, to open the next Workbook in the sequence.
I hope this makes sense!
Regards
Steve

How to open Excel Template save it under a different name and then write and save data to it at regualar intervals

I have an excel template that I have created. I am opening that template, saving it under a different name, and then writing and saving data to that excel sheet at regular intervals. It is giving me an error 5, I understand what this means and I am trying to work around it. However after too many hours spent trying to figure it out, I have asked for any help or input. I have attached an example vi, not the actual one since it is very involved.
Thanks
Solved!
Go to Solution.
Attachments:
Power Cycle Test 3.0 Excel Save Testing.vi ‏18 KB

This snippet encapsulates most of the previous suggestions, and adds a few of my own.
The first code shows one (simplified) way of building the output file name. It incorporates the Build Path function to combine Report File Path with the file name (don't need initial "\"), builds the File Name with Format into String, getting the Time part of the name from Format Date/Time String. I also use Build Path to get the Template path. Inside the For Loop, another Format into String gets the data that is placed in the 10 Excel cells. We don't write anything yet -- we're only filling in the cells in the WorkSheet (think of how you use Excel -- you could, but probably don't, save the WorkBook after every cell entry, you wait until you are all done and then do a Save, followed by closing Excel). Finally, when we are done, we save the file using the output name we want to use, then close Excel (which disposes of the Report Object). If we want to generate another report, with another (time-based) name, we can put this code into a sub-VI and simply call it again.
Don't worry if you don't have LabVIEW 2014 (which was used to save this snippet) -- most of the code comes from the original that you posted, so it should be a pretty simple edit to change that code to match this.
Bob Schor

HT204053 I have 4 iphones on the same Apple ID, but would like 4 different accounts and iCloud is this possible?

I have 4 iphones on the same Apple ID, but would like 4 different accounts and iCloud is this possible?

Create a new Apple ID for the one you want to change.

Directory Damage, what can be used for Disk Repair and Virus Detection?

Hi,
My eMac is acting up. Yesterday I started getting these messages that I needed to restart my computer (message was in a brown box window with an icon of a start up button in background).
I did the disk repair using Start up CD and it came back with "invalid key......." or something like that, and when I tried to repair it, it tried to repair the B-Tree's but then said it could not repair the problem.
I have Diskwarrior 3.03 Build 39, on a CD and on my FW Ext HD, which has a clone of my Mac HD.
Diskwarrior could not produce a graph of Mac HD because the directory was damaged. When I did a rebuild it hung on step 9 comparing directories, said there was 7 million + tests. ( I let it hang on step 9 for 15 hrs. to see if maybe it was just taking a long time due to corrupt directory). I finally clicked on Skip and got to the report page. I could do a preview, but the replace button is greyed out. When I was comparing the sizes of each folder, in both preview and original, I got a can not calculate error message on a few of them. The size of Mac HD in preview compared to the one in Original was different by 4 gbs. A week ago I repaired the Mac HD and did a Diskwarrior directory repair on all my HD's.
Before I do any reformatting of HD or other drastic measures, I was wondering what is safe to use for disk repair and virus detection. I know there is Norton System Works 3.0, Norton AntiVirus and TechTool, are these the only ones? Are these safe to use? Are there any other programs that can repair directory damage?
Thank you in advance,
Deb
eMac 2005 1.42GHz Combo Drive 256MB Tiger 10.4 75GB Mac OS X (10.4) Western Digital (WD) 160GB FW Ext & WD 320gb Media FW Ext, Creative Speakers

The long-standing rule of thimb has been that if Disk Warrior can't repair a mungled disk directory, then you're looking at reformatting or replacing the hard drive. Since this is a week-old hard drive, I'd suspect the replacement hard drive is itself bad. It might save you grief in the long run to contact the vendor who sold you the drive and inquire about their warrenty. You might want to first run the file system check utility fsck as described in Using Disk Utility and fsck
Directory repair and antivirus protection are different critters. Norton AV is mostly safe (if you don't mind it's track record of false positives) and is used by the IT department at the lab where I work. Norton SystemWorks, AKA Disk Doctor Kervorkian, is most assuredly NOT safe. For every poster reporting something nice about it, you'll find at least 2 dozen cursing it. It has a known track record of detecting problems no other utility finds and of "repairing" drives such that nothing can then read or repair the drive short of low-level reformatting (and occasionally even that fails).
Tech Tool Pro 4 has a good reputation, as does Drive Genius. Tiger OS X 10.4.2 and later include a version of Disk Utility that can for the first time also make effective B-tree and keys out of order and overlapped extent repairs. Still, my personal gut feeling is that if Disk Warrior is choking on the hard drive, you're looking at reformatring while zeros the drive (zeroing should detect and map out bad physical secotrs).
You can also refer to Disk First Aid: What to do when it finds an error and to Handling "overlapped extent allocation" errors reported by Disk Utility or fsck

Report that uses two different queries

I need to make a Report that uses two different queries. It would do one query, then the second, putting the results one after the other on the page.
Using the wizard, I put in the first query, and it will generate output from this first query.
I am able to put the second query in the Report, but when I try to use something from the second query, it gives a message about accessing a field below its frequency.
In the Reports forum, there is a reference to
tons of samples available in
builing reports doc 1. http://download.oracle.com/otn/other/general/B10310_01.pdf
But the link is broken.
What can you tell me?
Thanks, Wayne

What you're trying to accomplish is possible. Now that you've got the second query, add a new repeating frame in the layout editor below the first area. Open the property palette for the new repeating frame and set the source to the second query. Then add fields from the second query.
Also, remove the fields you have for the second query from the first frame that was created by the wizard; that's what's causing the error about accessing a field below its frequency.

Report execution for different variant and Broadcast

Hi experts,
i had a situation where i need to broadcast the same report for 100 vendors, but the information in the report will be different and specific to the vendor.
can i create different variant for each vendor and execute the report at the time in background and broadcast that to the vendors.
Is it possible for broadcasting the reports at a time
any idea will be appreciated
regards

Hi akshay
Is it like i can execute the report same time for different variants and broadcast that reports based on that variant to different vendor
for eg User A has to view report with Variant X.
User B has to view same report with variant Y
and so on is this possible for us to do at a time
or need to create different reprots for 100 vendors and broadcast them
Hope if u have any document for broadcasting that shows the steps to do this can you please share

What is the condition for using 'for all entries' and why?

what is the condition for using 'for all entries' and why? can any body tell the reason for this ? its a big favour of me .
regards,
ravi.

hi,
for all entries is used to join two or more tables.
It is same as join but performance wise for all entries is more effective.
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT
statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol
itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result
set. If the internal table itab does not contain any entries, the system treats the statement as though there were
no WHERE cond condition, and selects all records (in the current client).
for example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
this condition, return all entries of the sflight
hen using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
So for all entries is used for filtering out the data from the two tables based on the entries in them.
Advantages:
1) For all entries avoids inner join & so the performance increases.
2) For specified values in 1 itab, if you to fetch values from other table you can use it.
3) Use of select stmt in loop is gets avoided, as u can use read statement on the the new itab.

Maintaining Price Record for Different Stores and Distribution Centers

Hi expert
I want to maintain price condition record for condition type ZPR0 for one article
for different store and different Distribution Center
what is t.code and path
if sales price should copy from purchase price what are setting
thanks

Hi Hanumant,
To do sales pricing
Goto IMG>Sales & Distribution>Basic Functions>Pricing>Pricing Control
1. Use condition table 406 Site/article
2. Define Access Sequences ZPR0
    Enter accesses:10 406 Site/article Exclusive x
3. Define Condition Types (ZPR0 assign newly defined access sequence)
4. Define And Assign Pricing Procedures (assign condition types ZPR0..etc. to it)
Then maintain condition record , go to VK11 --> Enter your Z condition type (eg. ZPR0)., enter the amounts.
Add the pricing procedure , to sales document type.
For Retail Sales Pricing based on Purchase pricing you can follow the following method:
The retail price is always based on the purchase net/net price. This purchase net price is built up from the purchasing pricing elements or condition types defined to be included in the purchase net price. A planned mark-up is applied to the purchase net/net to calculate the proposed retail price. The planned mark-up can be set by merchandise category and for exceptions, more specifically by article.
You can perform Two-step calculation for retail pricing, for example, for stores that are supplied by a distribution center (internal vendor). Calculating sales prices for the stores is based on the transfer price for distribution centers (preceding organizational unit).
1. Set up Master Data (WB02) - Relevant Fields should be maintained
2. Set up Article Master Data - Logistics DC and Store View (MM42)
Relevant Fields should be maintained
3. Maintain Mark up for DC(VK11) -Markup % at Distribution channel distribution chain level
Mark ups maintained at two levels:
For DC: At distribution chain level
        Condition type used: AUFS
For Stores: At article level
     New condition type ZUFS created.
4. Maintain Mark up for Stores (VK11) Markup % at Store distribution chain level
5 Create Pricing Procedures (IMG) -Pricing Procedures created
6. Carry out Price calculation for DC(VKP5) - Pricing Document created - DC Transfer price calculated
7. Carry out Price calculation for Stores (VKP5) - Pricing Document created - Final Retail Price Calculated
The final retail price that is calculated is stored in the condition type VKP0.
Hope it helps,
Regards,
Anirban Roy

Is variable offsets can be used for characteristics, text and formulas?

hi all,
can anyone let me know whether variable offsets can be used for characteristics, text and formulas.
if so cany one send me examples of using offsets to my email id [email protected]
regds
hari

You use offsets on dates (0CALMONTH, 0FISCYEAR, 0DAT and so on) and of course the corresponding texts.
If you have 0CALMONTH in your query and you want to do the same thing not only for the current month but for the past twelve months, they you just minus 1, 2....11,12 for each selections, and at the same time you can create text variable for the description of each month.
thanks.
Wond

Same WAD Template to be used for different queries and dataprovider

Similar Messages

Maybe you are looking for