Same Windows Update installed multiple times through SCCM 2012

Hello There,
I am using SCCM 2012 to deploy critical and important updates through Automatic Deployment Rule it works fine but i have noticed recently on the client machines i see the same KB / update is installed multiple times.
Why would this happen? Please suggest.
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Hi,
My computer also have duplicated updates installed. I uninstalled one of them that needed a restart. Then uninstall another one after restart, it hadn't asked for restart and the uninstall process was very fast. So I think the update only installed one time,
the others are duplicated records.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Windows 8.1 clients are not detecting updates deployed to them through SCCM 2012 R2

    Hello, 
    We are using SCCM 2012 R2 to deploy software updates. 
    On Windows 8.1 SCCM does not show certain updates as being needed and isn't deploying them to the clients even though Windows Update will show them as high importance. These same updates are being detected and deployed to Windows 8 clients successfully.
    I believe that the update catalog that WSUS uses may have some incorrect detection rules for the following updates:  
    2917933
    2913320
    2913270
    2913152
    2909569
    2904440
    2904266
    2903939
    2899189 
    2893984
    2893294
    2892074
    2916626
    2898785
    My automatic deployment rules include Windows 8.1 in the product category. I have even created a standalone rule for Windows 8.1 that builds a new package and the behavior is the same. 
    We only have a handful of Windows 8+ clients so this hasn't been a big issue but others may want to keep an eye out. 

    I am also running into this issue.  After "checking online for updates" on one of my machines in office I found that there were 21 important updates for my 8.1 box.  When I cross reference them in SCCM under All Software Updates, it appears these
    8.1 updates are not listed.  They are however listed for all other OS.  
    10 seconds after typing this, I went in to verify my WSUS ->  Products and Classifications settings and come to find 8.1 and 2012 R2 weren't selected, even though it's an option in SCCM.  Go figure!  This wasn't the end though.  After
    running a Synchronization, my issue still wasn't resolved.  Went back to check my settings and they again were changed back to having these OS unchecked.  Finally, a solution!  I found that in SCCM, under Administration tab, Site Configuration
    > Sites > ABC - Mysitename, right click and scroll down to "Configure Site Components" > Software Update Point.  This setting (although the same as is in WSUS) takes precedence, thus was rolling my settings back to the original configuration
    in WSUS.
    So long story short, even though my automatic deployment rules stated approve all windows 7/8/8.1 criticals/importants, 8.1 was getting skipped for the most part because my WSUS server wasn't syncing with Microsoft for all of the updates I required.  I
    did have a couple of updates that squeezed through because they were categorized as "Security Updates for Windows 8, 8.1".
    Not sure if this is the solution you were looking for, but your thread got me started in the right direction, hopefully this response helps in the same way!
    Thanks!

  • Windows XP extended support patches through SCCM 2012

    My question is how do customers that  have signed up for extended support agreement with Microsoft for Windows XP get any NEW Windows XP security updates through SCCM/WSUS?
    1. How are these NEW security updates released to the customer?
    2. How can they deploy these through SCCM 2007/2012?
    3., If updates are released through another mechanism , I presume the customer woyuld need to manually deploy these through SCCM?
    Appreciate if anyone has had experience recently around this?

    There is another channel that these updates are released that has nothing to do with WSUS to my knowledge. I have no idea exactly how it works or if these updates can be integrated into ConfigMgr. You should talk to your TAM.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

    I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser?  It is already installed, I just don't use it.  I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it?  If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
    Stephanie HC

  • Can I have the same printer installed multiple times under different names?

    On WIndows I have the same printer installed multiple times
    All using the same driver
    I have a Canon printer that has a rear tray and a bottom tray
    So, I will have one printer that prints to the rear and the other to the bottom
    Other printers (the same one) will be set so that they print in high quality and in duplex for example
    I'll name the printers 1.Canon 2.Canon 3.Canon etc
    So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
    Can I do the same on my laptop?
    Thanks
    Omar

    Back Up - that's in case things go wrong.
    In the case you cite:
    You have
    Mother
    Mother Maiden Name
    as Faces, right?
    In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
    It will disappear and all the photos will be in the Mother face.
    Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
    You can  also just edit the name 'Mother Maiden Name' to 'Mother'
    As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
    Regards
    TD

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • Can CPS be installed multiple times on same server

    We have implemented CPS in our environment but want to know
    if CPS and can be installed multiple times the same server. We are
    using Contribute 3 as the client but our users don't know if they
    want to share administration for both Intranet and Public site
    development. So we have to see what are real options are.
    Thanks for any respones in advance.

    When you say share administration are you referring to user
    administration? There's no reason to need more than one instance
    unless you are allowing them to independently manage their
    users.

  • Deploy Windows 8 To Go through SCCM 2012 SP1

    First a little backgroud:
    I have SCCM 2012 SP1 with MDT 2012 Update 1 integrated. I am using an MDT UDI task sequence to deploy windows 8 and it works perfectly. My Windows 8 image is fairly thin (only containing OS updates and C++ runtimes), and I am using the MDT database
    and an MDT task sequence in SCCM 2012  to dynamically set a list of SCCM Applications to install as well as settings based on location. 
    Now I want to get Windows To Go provisioning working in SCCM 2012 SP1. I had a powershell script that preparied the drive and applied a thick image (including office and other apps) to it then updated unattend.xml with a computer name and the domain join
    info.  That worked for me however I'd like to levarage the dynamic task sequence that I described above to build these To Go sticks the same as my other Windows 8 machines without having to keep updating the thick image evertime something changes. 
    There isn't much info out there that Iv'e found on setting up SCCM 2012 SP1 to provision windows to go here are the two that I have found 
    http://ixrv.blogspot.com/2012/10/provisioning-windows-8-to-go-with.html
    http://technet.microsoft.com/en-us/library/jj651035.aspx
    I followed the instructions in the first link and was able to run the Windows to Go Creator program and apply the prestaged wim to the USB stick. I rebooted from the USB stick Windows PE started and started to run my task sequence then it errored out on
    the apply image step. At this point it occured to me that the MDT SCCM task sequence was probably not setup for prestaged media and or Windows To Go. 
    So my question is am I on the right track? Do I just need to examine each step in my task sequence and make sure that it will work properly with my Prestaged/Windows To Go stick? If so has anyone actually gotten this to work that could give me some advice?
    Or is it asking too much to have a dynamic Windows To Go task sequence and I should just be building a thick image and using a second task sequence specifically for Windows to go? 
    are there any other resources for Windows To Go with SCCM that I'm missing? 
    Thanks, 
    Tony

    First of all sorry I missed your last three posts I have to check my email notifications. I'll try to answer all of them even though I think the last part is the only one where you are still stuck. 
    When I created my prestaged media I didn't put anything into it except for the the OS image and my PE image. On the Select Application and Select Package screen in the prestaged media wizard remove any application or packages that are added automatically.
    The task sequence is supposed to be smart enough to know if the version of the package that is on the prestaged media is out of date and go to a DP to get it but that didnt work for me. The only way I was able to get it to work was to remove all the packages
    from the prestaged media even the Customsettings package, the MDT toolkit package, USMT, etc.. 
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/d729d0ff-829f-4af8-91af-2131b3355fd0/
    This thread which is about prestaged media in SCCM 2007 helped me to understand how prestaged media is supposed to work. Basically what I learned is that once the computer is rebooted from the ToGo stick into PE the task sequence will run the same as any
    other task sequence installing any applications and setting up your ToGo stick just like any other computer that runs the task sequence they dont need to be in your prestaged media for this to happen. 
    You shouldn't need to worry about partitioning WTGCreator.exe will partition the ToGo stick for you I'm just using the standard MDT Integrated partitioning in my task sequence. The one thing that I did was set the Windows To Go Creator package to "run from
    distribution point" which speed things up because then it didnt download the prestaged wim then apply it to the USB drive. 
    Is it booting into PE then rebooting? Did you check the "Allow unattend operating system deployment" check box when you made your prestaged media? If so it wants you to have set the task sequence to run in a task sequence variable SMSTSPreferredAdvertID
    to the task sequence ID you want to run. I'd just remake the media and leave that box unchecked. 
    Good luck and let me know how it works for you. I'll check back sooner this time I promise. 

  • My iTunes has stopped working out of nowhere. When iTunes is opened it displays "iTunes has stopped working" and windoes automatically closes it saying it will look for a soluton. What do I do? I have un-installed it and re-installed multiple times.

    My itunes has stopped working out of nowhere. When I open iTunes a message appears stating "iTunes has stopped working." and windows closes iTunes sayng it will look for a solution. I have Windows 8.1 64-Bit and have been using iTunes 11.1 (or the newest one out there). I have un-installed and re-installed multiple times. The same message continues to pop up.

    Hi biazonmg,
    Thanks for using Apple Support Communities.  If iTunes is unexpectedly quitting when you open it, this article has steps to isolate and troubleshoot that:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    - Ari

  • HT1926 I get a message stating MSVCR80.dll is missing. How to fix? I have removed and re-installed multiple times.

    I get a message stating MSVCR80.dll is missing. How to fix? I have removed and re-installed multiple times.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Used windows update, installed 8 updates, FireFox does not display some websites and images correctly.

    Hello,
    Windows update installed 8 updates to my computer and now several websites are not displaying images or text correctly. Some forum looks like they were loaded in an extreme basic mode, another forum main page looks fine but sub forums are loaded in in the same basic looking mode, another forum only displayed 1 user avatar out of hundreds.
    Chat/IRC clients wont load.
    Everything works when I used IE.
    I tried to follow the help thingies but was led to a dead link.
    http://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%24%20can
    Anybody have any ideas?

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

    Hi,
    Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
    SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
    also it gets installed through sccm when the machine is set to english language, 
    Thank you
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    Hi Friends,
    we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
    i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
    some errors which sccm reports display are 
    11171
    10008
    10021-
    17031 - 
    1602 - User Cancelled installation
    113 - No more internal file identifiers available
    10070 - File handle reference is no longer available
    10050 - A socket operation encountered a dead network
    11170  - The task sequence manager could not successfully complete execution of the task sequence
    i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
    Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
    is there a way to cut short the Task seq and keep it simple ?
    right now its like this 
    1. checking for prerequisite : checks for OS Name and OS version
    2. installs PGP Bootgaurd Bypass
    3. System Restart
    4. Installing Windows 7 Service Pack 1
    5. Final Restart
    6. uninstall PGP Bootgaurd Bypass
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

  • I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

    I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

    Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
    Photoshop Elements
    Good luck on it! 
    Gene

  • The same podcast shows up multiple times

    In iTunes, the same podcast shows up multiple times. There is only one copy of the file on my computer, and the file it located in the right location, but in iTunes, the same podcast is repeated two or more times. When I delete a single podcast and try to play its copies, iTunes notifies me that it can't find the file. I believe this happens when I use the import folder utility and add music in the iTunes music default location (which includes the podcasts as well as the music I want to import). Does anyone know how to keep this from happening?
    Thanks

    Well, the easiest way would be to stop using the import folder utility. Sounds like you're adding the podcast multiple times. You're probably doing it to other files as well...

  • Installing multiple applications through one application (or package)

    I am trying to make an application (or package) that will install multiple programs through the one application.  Right now the only way I can see to do this, is to force an application to install another one as a requirement.  The easiest example
    I can give is iTunes.  We customize the iTunes install to lock down features and not install every application that isn't needed in our environment.  So technically iTunes actually installs 5 different programs.  I need to be able to select
    iTunes during an OSD deployment using the MDT UDI Wizard, and it will install iTunes and anything needed for it to work correctly.  
    I am just using iTunes as an easy example to explain.  We have other programs that work in a similar way, or require other applications to be install.  My main reason for this request is we have standard engineering applications, but I don't want
    them installed on all computers, I want just one option that will in turn install all the standard applications.  
    I am guessing what I will have to do, is make one install that requires the previous application and installs it, and do that for each application, but this doesn't seam like a good solution as it means I will have to have a separate application only for
    this OSD problem.
    Is there an easier/correct way of doing this, mainly for OSD?
    Thank you,

    Dependencies only forces the box to be checked, it doesn't install it in the correct order.  We are having another problem in that area.  We have an Office add-on that in SC requires a version of office to be installed.  We can't set the dependency
    for that add-on since we have multiple versions of office, but even if a version of office is selected, it doesn't try to install it before it tries to install the add-on.  So the add-on install ends up failing since office isn't installed when it tries
    to install, even though it installs afterwards.  
    This is why I am not considering using dependencies since I can't get it to install in the correct order.  If there is a way to enforce the when something gets installed, then yes, this would work for me.

Maybe you are looking for