Sample C# code to combine 1 or more pdfs
Hi All,
I was wondering If any of you have a sample C# code to combine 1 or more pdf files into one PDF using Adobe acrobat?
Thanks
Mahesh
Try the SDK forum.
Similar Messages
-
Combine two or more pdf as one pdf from command line
Hi,
I have to combine two or more pdf file as one pdf file from command line.
Is it possible.
Thanks,
Ansaf.Acrobat has a rich SDK, but not using the command line - declared obsolete by Adobe several decades ago (but taking a long time to die). To be fair, implementing thousands of APIs via command line would make for a rather complicated command line. Use OLE. BUT NOT ON A SERVER!!
-
Creating 1 pdf file from 2 or more pdf files
Is it possible to combine two or more pdf files into one pdf file ?
Yes, you can do this with our CreatePDF service or with our desktop application, Adobe Acrobat.
-
Needs sample ABAP code for field routine
Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source) Data in Cube(Target)
=================== ===================
AA1/B1/CCC2/DD2/EEE1 EEE1
AAA1/BB2/CC1/DDD3/EE2 EE2
A2/BBB2/CC2/DDD3/EEE5 EEE5
AA2/BB1/C1/DDD3/EE3 EE3
A3/B1/CC2/DDD1/EE4 EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AMHi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
V2(5) type c,
V3(5) type c,
V4(5) type c,
V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM -
Sample UI5 code to call gateway create entity
Hello,
can anyone provide me some sample UI5 code to call create entity gateway service.
regards
KaushikHi kaushik,
As mentioned above you can use Odatamodel Create method to trigger a POST request.
Please refer the links for more details
SAPUI5 SDK - Demo Kit
Odatamodel.create()
https://sapui5.hana.ondemand.com/sdk/#docs/api/symbols/sap.ui.model.odata.ODataModel.html
Regards,
Jeffin -
Sample source code for fields mapping in expert routine
Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliazBasic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya -
Functional Module:Need some sample source code.
Hi All,
I have created a customized table u2018ZStock_Order_Dealeru2019 with the following fields:
Stock_Order_Dealer
Dealer Number
S2D order Number
Line item Number
Material Number
Ordered Quantity
Batch Number
Received Quantity
S2D from D2G
Receiving Date
I need to create a remote enabled function module in CRM system to fetch the u2018Batch Numberu2019 and u2018Received Quantityu2019 fields when the Material Number is fed to it.Please note that the input and output should be tables.
Could some one please give some sample source code for this.I used table types and select queries to resolve this problem.
-
Sample ABAP code for userexits, and calling bapi's
Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasadhai ,
check this code...
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
Wanted: Sample source code for voice recorder
I've been google searching for some sample source code to implement a voice recorder on my AudioVox 5600. I would like to learn how to read from the microphone and write to my SD card in a standard file format like wav, wma or mp3.
Can anyone help me understand how to do this?
Thanks,
SiegfriedBasic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya -
Need sample source code for calling stored procedure in Oracle
Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause. -
Need Sample source code for Forum in jsp
Hi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumarHi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumar -
How do you combine two or more movie clips into one movie clip in iMovie '09
how do you combine two or more movie clips into one movie clip in iMovie '09
First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
When finished, use the SHARE menu to share the project. -
How do I combine two or more pictures into one?
How do I combine two or more pictures into one?
I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else. I wanted to put several photos from a file onto a new blank image. This is what I did.
1. Create a blank page. File/New/ Blank File. Put in the size. I used 8x10.
2. Bring the photo you want to use into Elements as you always do. It will list along the top next to the blank sheet.
3. Choose SELECT (top of screen)/ Select All.
4. Choose Edit/Copy or Command "C"
5. Click on the Blank File. Chose Edit/Paste or Command "V"
6. Click on Image/ Transform or Command "T". There should be a dotted line around your pasted image. You can then move and adjust the image to how you want it. When finished, press the check-mark on lower right of photo.
7. Repeat this with all the photos you want on the new blank file.
8. You will see on lower right of Elements, the background layer and as many layers as you have photos. These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible. This will merge all layers to the background.
9. Save as and you are done. -
Delete unwanted company code, like sample company codes
Hi Expert,
I would like to have advice on deleting unwanted company codes, for example, country sample company codes.
I would like to have remaining company code of 0001, and my client company code, say 1000, only.
Is it enough to delete these unwanted company code using EC01?
I will make sure:
No transactional data for these company codes, say Table BSEG
No master data for these company codes, GL: SKB1, Vendor: LFB1, Customer: KNB1, etc
Thanks and regards,
sbmelHi,
You can delete un-wanted Company codes from the system. But you will get frustation with this task. I am telling this based on my experience for 2 times..
You have to archive data and company codes before started deleting this. and you have to delete Profit centers, Cost centers, Cost elements, GL Accounts, Activity types and all other master data.. First we have to delete the dependant data (I mean assigned child data). other wise it will give many errors..
For example: If you delete standard hierarchy with out deleting Cost centers or profit centers firsst,,,then you can not delete profit centers or cost centers..
So we have to delete one by one logically.. hope it helps..
thanks
Fit 4 Nothing -
Databound Drop Down List combine two or more column with customize format
Hi all
I am writing a project have Databound Drop Down List like example in http://www.oracle.com/technology/products/jdev/tips/mills/databound_lists.html, but my Databound Drop Down List combine 2 column with format "Name | DepartName" or something like that. I mean how can I change format when I combine two or more column display value in drop down (default is space between columns, ex: "Name DepartName")You could add a transient (calculated) attribute to your view object and use this one in your list binding.
hth, Markus
Maybe you are looking for
-
A PC colleague wants to know how to create and SAVE a contact sheet. She has no problem printing them... that seems to be easy. But she is unable to actually SAVE one. Anyone know how to do this please? Thanks.
-
UIManager and Jpanel back ground on metal LnF
Hi what wold be the property to change the back ground of all JPanels to lets say Color.WHITE UIManager.put("what value",Color.white);also where would i be able to fine a list of the standard properties that the Metal LnF has? for colors?
-
Which Service Version to use for EhP4
Hi all, We are upgrading our portal and ECC6 system and implementing ESS. We believe we have consulted the right notes and docs and have correct versions installed. We are on... SAP_BASIS 701 SP7 SAP-HR 604 SP27 EA-HR 604 SP27 BP ESS 1.41 SP8 SAP ES
-
Will Designer 6 run on XP?
Hello (and Happy New Year), Will Designer 6 run on Windows XP? I was under the impression it didn't, but that 6i would. Can somebody please clarify? Thanks, Antony
-
What is the frequency response for recording with garage band internally, and externally with the latest onboard Macbook pro sound card?