Sample code help

Hi All!
I am getting a .txt file from legacy systems.Now i have to read that file and put the values into internal tables using datasets for further processing.
Can anybody give me sample code on this.
Regards
Pavan

Hi pavan,
Code like this...
<b>data : begin of file occurs 0,
         v_mara(255),
       end of file.
call function 'GUI_UPLOAD'
  exporting
    filename                      = 'C:\legacy.TXT'
   filetype                      = 'ASC'
IMPORTING
  FILELENGTH                    =
  HEADER                        =
  tables
    data_tab                      = file
        loop at file.
         write : file-v_mara.
          endloop</b>.

Similar Messages

  • Cryptography: strange msdn sample code, help please....

    Apparently that line of code does nothing, to continue the discussion
    I would like to know your guys opinion of MS and the level of security they provide, I assumed everything was top-notch, but looking through their usage of their own libraries it appears they are incompetent.
    Can I get some opinions on this, I have updated the question to a discussion
    ORIGINAL QUESTION - EVERYTHING BELOW (irrelevant):
    I have been able to create a complete class for network server and client TCP/IP unlimited secure data transmission using RSA/AES (.NET framework cryptography only), and am implementing an EC/DH version  (.NET framework cryptography only). Everything
    is working ok, I was just curious: on the VB example on this page:
    https://msdn.microsoft.com/en-us/library/system.security.cryptography.ecdiffiehellmancng.aspx
    What is the purpose of this line:
    Dim k As CngKey = CngKey.Import(bob.bobPublicKey, CngKeyBlobFormat.EccPublicBlob)
    On this page in the VB example??
    EDIT reason: forum bug correction
    EDIT2: I have noticed that the people writing the msdn samples do not understand the underlying cryptography, mostly based on their naming of variables. For the most part their usage follows the federal standards. Should I be worried that MS might not be
    properly implementing the .NET cryptography algorithms?

    You have completed the class and everything seems fine, you sent several GB of data through the class and it appears to be as secure as the RSA version. However, you found a line in a sample that isn't needed so you are concerned that they may be incompetent
    and the .NET crypto libraries may not be secure. Is that an accurate description ?
    I listed a single example, I have found dozens of them - including many examples which break the security rules and no information is given that it is doing such.
    Did you have any opinion or you just want to stir up arguments???
    I think the code is fine. I programmed a windows phone application myself and the samples are okay but most of the Microsoft samples are starter points and in some they clearly state that and not to use the code in production machines (if you have not noticed
    that in the MSDN programmer documentation you probably are new to Microsoft programming or have only been programming a few years on their platforms). This excludes the GUI controls included with some of the samples for windows application which
    are expected to work. They are one of the few and only rare exceptions to this rule. vb.NET 0.0 is right Microsoft is slow sometimes to stay modern but the libraries are effective.
    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
    - Yoda. Blog - http://www.computerprofessions.co.nr
    BTW, COM is still a pain and the device drivers/kernel components are becoming better in Microsoft software but its a good progression right now.
    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to
    suffering - Yoda. Blog - http://www.computerprofessions.co.nr

  • Survey creation abap code help needed

    hello experts,
    I need to create a survey in crm, by taking values from end-user from a webpage
    A sample code help is needed.
    Thanks in advance

    Take a look at this SAP note - It does a pretty good job of detailing the steps for you.  No coding necessary, it worked out of the box for us after patching this note.
    https://service.sap.com/sap/support/notes/638320

  • I just need a little help to connect with eCommerce API. Could anyone please give a JAVA sample code

    Hi All,
    I am looking for a sample code to just to connect with Business Catalyst eCommerce API. My aim is to simply retirieve the list of the products and update them.
    It would be really helpful, if anyone please provide me a sample code in JAVA, just to connect with the API.
    Thanks
    Ani

    public static void main(String[] args) throws RemoteException, MalformedURLException {
                        String endpoint = "https://CC.sys.com/CatalystWebS1ervice/CatalystEcommerceWebservice.asmx?WSDL"; // endpoint url can be found under Site Settings -> API -> click on eCommerce and copy the URL on the browser here.
                        CatalystEcommerceWebserviceSoapProxy sq = new CatalystEcommerceWebserviceSoapProxy(endpoint);
                        Products[] prod = new Products[2];
                        prod = sq.product_ListRetrieve(Username , Password, SiteID, CatalogueID);
                        System.out.println(prod[1].getDescription());

  • Newbie need help in compiling sample code

    Hi,
    I know this is a very newbie question.
    Could someone please help me out on how to compile the sample code?
    [root@localhost getting_started]# gcc -I/usr/src/db-4.7.25.NC/build_unix gettingstarted_common.c example_database_read.c
    /tmp/ccMnYv8b.o: In function `open_database':
    gettingstarted_common.c:(.text+0xeb): undefined reference to `db_create'
    gettingstarted_common.c:(.text+0xfc): undefined reference to `db_strerror'
    /tmp/ccMnYv8b.o: In function `databases_close':
    gettingstarted_common.c:(.text+0x513): undefined reference to `db_strerror'
    gettingstarted_common.c:(.text+0x565): undefined reference to `db_strerror'
    gettingstarted_common.c:(.text+0x5ba): undefined reference to `db_strerror'
    collect2: ld returned 1 exit status
    Thanks alot.
    JB

    Hi,
    I tried:
    [root@localhost getting_started]# gcc -I/usr/src/db-4.7.25.NC/build_unix -L/usr/src/db-4.7.25.NC/build_unix -ldb gettingstarted_common.c example_database_read.c
    /tmp/ccaHcwAy.o: In function `open_database':
    gettingstarted_common.c:(.text+0xeb): undefined reference to `db_create'
    gettingstarted_common.c:(.text+0xfc): undefined reference to `db_strerror'
    /tmp/ccaHcwAy.o: In function `databases_close':
    gettingstarted_common.c:(.text+0x513): undefined reference to `db_strerror'
    gettingstarted_common.c:(.text+0x565): undefined reference to `db_strerror'
    gettingstarted_common.c:(.text+0x5ba): undefined reference to `db_strerror'
    collect2: ld returned 1 exit status
    But it still does not work.
    Any idea?
    Sorry for the newbie question.
    JB

  • Sample code to get 1st 5 characters of a field and also how to use help ?

    hi ABAP4 experts,
    We are kind of new at ABAP4. We'd be appreciated if you would provide sample code to get 1st 5 characters of a field and also let us know on how to use ABAP4 help to look for such kind solution that next time we don't have to bother you guys here!
    We will give you reward points!
    Message was edited by: Kevin Smith

    Hi Kevin,
    here is the Example for the offset which you want
    DATA TIME TYPE T VALUE '172545'.
    WRITE TIME.
    WRITE / TIME+2(2).
    CLEAR TIME+2(4).
    WRITE / TIME.
    <u>The output appears as follows:</u>
    172545
    25
    170000
    <i>First, the minutes are selected by specifying an offset in the WRITE statement. Then, the minutes and seconds are set to their initial values by specifying an offset in the clear statement.</i>
    <b>2nd Example:-</b>
    DATA: F1(8) VALUE 'ABCDEFGH',
    F2(8).
    DATA: O TYPE I VALUE 2,
    L TYPE I VALUE 4.
    MOVE F1 TO F2.      WRITE F2.
    MOVE F1+O(L) TO F2.      WRITE / F2.
    MOVE F1 TO F2+O(L). WRITE / F2.
    CLEAR F2.
    MOVE F1 TO F2+O(L). WRITE / F2.
    MOVE F1O(L) TO F2O(L). WRITE / F2.
    This produces the following output:
    ABCDEFGH
    CDEF
    CDABCD
      ABCD
      CDEF
    First, the contents of F1 are assigned to F2 without offset specifications. Then, the same happens for F1 with offset and length specification. The next three MOVE statements overwrite the contents of F2 with offset 2. Note that F2 is filled with spaces on the right, in accordance with the conversion rule for source type C.
    if you want more info
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb341a358411d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3294358411d1829f0000e829fbfe/content.htm
    hope this solves your Problem
    Thanks
    Sudheer

  • Can somebody help in getting a sample code to upload a csv file

    Can somebody help in getting a sample code to upload csv file from folder every 30 minutes that will update a particular record in crm ondemand

    Hi,
    I'm sorry but I do not have a code sample which performs the scenario you have described below. The samples I did provide are meant to illustrate the use of CRM On Demand Web Services and can be used as a guide to those developing integrations.
    If you have specific questions or issues that arise during the development of your integration please don't hesitate to post them, however, I would recommend that you contact Oracle Consulting Services or one of the many system integrators who actively develop applications which integrate with CRMOD if you require more in-depth assistance.
    Thanks,
    Sean

  • Need help with API and sample code for checking a user's rights on a folder

    Hi All,
    I am working on an UCM integration where user supplies a folderpath (ucm folders), and a file is later uploaded to this location.
    Since a user can provide a folderpath where he has only Read Access or no access at all, we are trying to work out a way to pre-check his permissions on the folder.
    Since we have Entity Security enabled, we have 5 security fields to rely on Account, Security Group, User Access List, Group Access List, Role Access List.
    Writing custom code for this security check is second on our agenda.
    Firstly, we wish to know the API and sample code that typically performs this Security Check in UCM.
    We could find intradoc.shared.SecurityUtils which has methods to check security on SGroup and Account, but we couldn't find anything for:
    1) Overall security check
    2) ACL security check on top of sgroup and account security check

    Any ideas anyone?!
    I am looking forward to some pointers here. :(

  • HELP!how to show lines in the sample code 'docsig'

    I want to show my handwritten in the pdf and my code is based on the sample code 'docsig',
    can anyone read the following code, and tell me the reason why it not show the line. Thanks!
    //from the project 'docsig' in the acrobat sdk 9.0 sample code
    CosObj DSHandler::CreateN2XObject( CosDoc cosDoc, const CosObj sigField, const CosObj sigAnnot, const ASFixedRect* const pBBoxRec )
    //Define a stream to draw a line
    char buf [500];
    sprintf(buf,"150 250 m 150 350 l S");
    //Get the stream length
    ASUns32 streamLength = (ASUns32)strlen(buf);
    //Create a CosObj object that represents the stream length
    CosObj LengthEntry = CosNewInteger(cosDoc, false,streamLength);
    //Create a CosObj that represents a stream dictionary
    //and sets its key-value pairs
    CosObj AttrDict = CosNewDict(cosDoc, false, 5);
    char *Length_KStr = "Length";
    CosDictPutKeyString(AttrDict, Length_KStr, LengthEntry);
                    CosObj  cosStm =  CosNewStream64(
                                   cosDoc,                                                  // cos document to use the newly created stream
                                    true ,                                                                      // cos stream is indirect object?
                                   0,                                                    // input stream
                                   0,                                                                                             // start reading from stream position
                                    false ,                                                    // stream is decoded?
                                   AttrDict,                                                // attributes dictionary
                                    CosNewNull(),      // encode params
                                   -1,                                                                                           // decode length
                                    false                                                                       // allowing delayed reading of input stream
        return cosStm;
    Why I just get a blank signature ? It should draw a line, but not showed in the pdf file.

    you need to change the following piece of code
    case 10:   // * pressed
    case 11:   // # pressed
    clearText = true;
    if (first) // first operand
    if(lcdField.getText().length()==0)
    result = 0.0;
    else
    result = Double.parseDouble(lcdField.getText());
    first = false;
    prevOperator = i;
    else //second operand already entered, so calculate total
    switch(prevOperator)
    case 10: //divide button
    result /= Double.parseDouble(lcdField.getText());
    break;
    case 11: //multiply button
    result *= Double.parseDouble(lcdField.getText());
    break;
    lcdField.setText(Double.toString(result));
    if(i==14) //equal button
    first = true;
    else
    prevOperator = i; //save last operator
    break;
    }its gets excuted when you press the * or # buuton

  • Help with displaying image using OpenGL ES sample code - image size prb

    I am using some sample code that currently displays an image 256x256 pixels. The code states the image size must be a power of 2. I have tried an image 289x289 (17^2) and it displays a square the same size as the 256x256 with a white background. I want an image 320x320 displayed. Should be obvious for people familiar with OpenGL. Here is the code which displays the image and rotates:
    - (void)setupView
    // Sets up an array of values to use as the sprite vertices.
    const GLfloat spriteVertices[] = {
    -0.5f, -0.5f,
    0.5f, -0.5f,
    -0.5f, 0.5f,
    0.5f, 0.5f,
    // Sets up an array of values for the texture coordinates.
    const GLshort spriteTexcoords[] = {
    0, 0,
    1, 0,
    0, 1,
    1, 1,
    CGImageRef spriteImage;
    CGContextRef spriteContext;
    GLubyte *spriteData;
    size_t width, height;
    // Sets up matrices and transforms for OpenGL ES
    glViewport(0, 0, backingWidth, backingHeight);
    glMatrixMode(GL_PROJECTION);
    glLoadIdentity();
    glOrthof(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f);
    glMatrixMode(GL_MODELVIEW);
    // Clears the view with black
    //glClearColor(0.0f, 0.0f, 0.0f, 1.0f);
    glClearColor(255, 255, 255, 1.0f);
    // Sets up pointers and enables states needed for using vertex arrays and textures
    glVertexPointer(2, GL_FLOAT, 0, spriteVertices);
    glEnableClientState(GLVERTEXARRAY);
    glTexCoordPointer(2, GL_SHORT, 0, spriteTexcoords);
    glEnableClientState(GLTEXTURE_COORDARRAY);
    // Creates a Core Graphics image from an image file
    spriteImage = [UIImage imageNamed:@"bottle.png"].CGImage;
    // Get the width and height of the image
    width = CGImageGetWidth(spriteImage);
    height = CGImageGetHeight(spriteImage);
    // Texture dimensions must be a power of 2. If you write an application that allows users to supply an image,
    // you'll want to add code that checks the dimensions and takes appropriate action if they are not a power of 2.
    if(spriteImage) {
    // Allocated memory needed for the bitmap context
    spriteData = (GLubyte *) malloc(width * height * 4);
    // Uses the bitmatp creation function provided by the Core Graphics framework.
    spriteContext = CGBitmapContextCreate(spriteData, width, height, 8, width * 4, CGImageGetColorSpace(spriteImage), kCGImageAlphaPremultipliedLast);
    // After you create the context, you can draw the sprite image to the context.
    CGContextDrawImage(spriteContext, CGRectMake(0.0, 0.0, (CGFloat)width, (CGFloat)height), spriteImage);
    // You don't need the context at this point, so you need to release it to avoid memory leaks.
    CGContextRelease(spriteContext);
    // Use OpenGL ES to generate a name for the texture.
    glGenTextures(1, &spriteTexture);
    // Bind the texture name.
    glBindTexture(GLTEXTURE2D, spriteTexture);
    // Speidfy a 2D texture image, provideing the a pointer to the image data in memory
    glTexImage2D(GLTEXTURE2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GLUNSIGNEDBYTE, spriteData);
    // Release the image data
    free(spriteData);
    // Set the texture parameters to use a minifying filter and a linear filer (weighted average)
    glTexParameteri(GLTEXTURE2D, GLTEXTURE_MINFILTER, GL_LINEAR);
    // Enable use of the texture
    glEnable(GLTEXTURE2D);
    // Set a blending function to use
    glBlendFunc(GL_ONE, GLONE_MINUS_SRCALPHA);
    // Enable blending
    glEnable(GL_BLEND);
    // Updates the OpenGL view when the timer fires
    - (void)drawView
    // Make sure that you are drawing to the current context
    [EAGLContext setCurrentContext:context];
    glBindFramebufferOES(GLFRAMEBUFFEROES, viewFramebuffer);
    glRotatef(direction * 3.0f, 0.0f, 0.0f, 1.0f);
    glClear(GLCOLOR_BUFFERBIT);
    glDrawArrays(GLTRIANGLESTRIP, 0, 4);
    glBindRenderbufferOES(GLRENDERBUFFEROES, viewRenderbuffer);
    [context presentRenderbuffer:GLRENDERBUFFEROES];
    }

    +I am using some sample code that currently displays an image 256x256 pixels. The code states the image size must be a power of 2. I have tried an image 289x289 (17^2)+
    The phrase "a power of 2" refers to 2^x so your choices above 256 are 512, 1024 etc.
    The texture size has nothing to do with the displayed size - OGL will stretch or shrink your texture to fit the size of the polygon you're displaying it on. I recommend you scale your image to 256x256 and work on make the polygon the size you want and work on your image quality from there.
    You can work on the size or orientation of the poly surface to make it larger but OGL doesn't support setting a model to a screen image size or anything like that. That sounds more like a Quartz or CoreGraphics kind of thing if you want to set an exact screen size to the pixel.
    HTH,
    =Tod
    PS You can display your code correctly by using { code } (without the spaces) on either side of your code block.

  • Help:sample code of collaborative session

    Hi, all
    I'm new to Java, I need sample code of how to develop a collaborative session, can any one give me a hand? Thanks
    Louis

    1) Learn Java
    2) Learn Java networking
    3) Examine, test, and study Java extensions
    4) Select appropriate Java extensions and environments
    5) Create requirements
    6) Create use cases
    7) Design system
    8) Implement design
    9) Test, test, test, test based on #5 and #6
    10) Fix and go back to #9
    11) Put it into production and cross your fingers that you didn't miss anything...
    I think that just about covers it.

  • Pleasee Help , URGENTT , Need sample code

    We should upload Sales Order XML File into OA Tables everyday .
    As I am very new to XML I request to give complete sample code ( giving just the logic needs time to understand, very urgent..)
    The current XML File can have mutilpe one sales order and each sales order can have many lines .Each line can have multiple taxes.
    Pls give the sample Code which you think is the best approach.
    I have used xpath(may not be right)
    I want to insert Parent Node / Child Node / Grand Child Done as one set of data.
    I used Xpath syntax , when I give the Parent node path in for loop, it inserts all parent nodes data at one time into the table , similarly all child nodes at one time .
    So I am unable to link grand child record with child record and parent record.
    To be specific , I am unable to trace these are the tax records for this line from this order.
    I have used xpath. I have loaded the xml file into table with clob variable
    l_OrderRequest_nodelist := xslprocessor.selectNodes(xmldom.makeNode(l_doc), '/Recordset');
    FOR rec IN 0 .. xmldom.getlength(l_OrderRequest_nodelist) -1 loop l_OrderRequest_node := xmldom.item(l_OrderRequest_nodelist,
    rec);
    end loop;
    we are not validating Sales order XML File with DTD or XSD .
    Please give sample code for parent / child /grandchild .
    Below is the sample file.
    - <Recordset>
    - <Header dueDate="2007-01-17T16:09:05" orderDate="2004-01-17" orderID="0009" transactionID="1389" type="new">
    <KeyIndex>2</KeyIndex>
    - <BillTo>
    - <Address addressID="5619" isoCountryCode="US">
    <Name>fMat</Name>
    - <PostalAddress name="default">
    <Street>34545</Street>
    <City>dfgfg</City>
    <State>AZ</State>
    <PostalCode>85086-1693</PostalCode>
    <County>Maricopa</County>
    <Country>US</Country>
    </PostalAddress>
    <Email name="default">[email protected]</Email>
    </Address>
    </BillTo>
    <PromotionCode />
    - <SubTotal>
    <Money currency="USD">32.49</Money>
    </SubTotal>
    - <Tax>
    <Money currency="USD">2.32</Money>
    <Description />
    </Tax>
    - <Shipping>
    <Money currency="USD">8.95</Money>
    <Description />
    </Shipping>
    </Header>
    - <Detail lineNumber="1" quantity="1">
    - <ItemDetail>
    - <UnitPrice>
    <Money currency="USD">29.99</Money>
    </UnitPrice>
    <ShortName>Little;reg; pxxxx® Learning System</ShortName>
    </ItemDetail>
    - <Tax>
    <Money currency="USD">1.68</Money>
    <Description />
    - <TaxDetail category="sales">
    - <TaxAmount>
    <Money currency="USD">1.68</Money>
    </TaxAmount>
    <TaxLocation>AZ</TaxLocation>
    </TaxDetail>
    </Tax>
    </Detail>
    - <Detail lineNumber="2" quantity="1">
    - <ItemDetail>
    - <UnitPrice>
    <Money currency="USD">29.99</Money>
    </UnitPrice>
    <ShortName>Little;reg; pxxxx® Learning System</ShortName>
    </ItemDetail>
    - <Tax>
    <Money currency="USD">1.68</Money>
    <Description />
    - <TaxDetail category="sales">
    - <TaxAmount>
    <Money currency="USD">1.68</Money>
    </TaxAmount>
    <TaxLocation>AZ</TaxLocation>
    </TaxDetail>
    </Tax>
    - <Tax>
    <Money currency="USD">0.68</Money>
    <Description />
    - <TaxDetail category="sales">
    - <TaxAmount>
    <Money currency="USD">0.68</Money>
    </TaxAmount>
    <TaxLocation>DISTRICT</TaxLocation>
    </TaxDetail>
    </Tax>
    </Detail>
    </Recordset>
    We are working on Oracle9i Enterprise Edition Release 9.2.0.6.0
    Thanks in Adv
    Kal

    Hi
    here is a quick demo:
    DATA: a,b, result(10).
    IF a IS Initial.
      Result = 'yes'.
    ELSEIF NOT a IS Initial AND NOT b is initial.
      Result = 'no'.
    Else.
    RESULT = 'abc'.
    ENDIF.

  • How to Delete a Specific Cell in a Matrix + plz Give sample code for Lost F

    hello there !!!!
    i m in Great Trouble please help me out..
    i have to search for a specific Column n then i have to validate that portion, similarly after validating i have to add update delete all the fuction apply... so please help me i m very upset.
    Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
            Try
                Dim Count As Int32
                If FormUID.Equals("Allowance") Then
                    If (pVal.BeforeAction = True) And (pVal.ItemUID = "1") And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                        If pVal.Row = 0 Then
                            'BubbleEvent = False
                        End If
                        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                        Count = o_Matrix.RowCount()
                        SBO_Application1.MessageBox("Matrix Count is " & o_Matrix.RowCount)
                        Validate(pVal, EventEnum, FormUID, BubbleEvent)
                    End If
                End If
            Catch ex As Exception
                SBO_Application1.MessageBox(ex.Message)
            End Try
        End Sub
        Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
            Dim Row, ii As Integer
            o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
            o_Matrix.FlushToDataSource()
            Try
                For Row = 2 To o_Matrix.RowCount
                    StrName = Convert.ToString(DBtable.GetValue("CardCode", Row - 1)).Trim()''' i got Error over there n rest of my code is also not working pls...
                    StrUId = Convert.ToString(DBtable.GetValue("U_AlwID", Row - 1)).Trim()
                    StrEnter = Convert.ToString(DBtable.GetValue("U_SupEnter", Row - 1)).Trim()
                    StrExist = Convert.ToString(DBtable.GetValue("U_SupExist", Row - 1)).Trim()
                    If Row - 1 < DBtable.Rows.Count - 1 Or (Not (StrName.Equals(String.Empty) And StrUId.Equals(String.Empty) And (StrEnter.Equals(String.Empty) Or StrExist.Equals(String.Empty))) And (Row - 1 = DBtable.Rows.Count - 1)) Then
                        If (Not StrName.Equals(String.Empty)) And ((StrUId.Equals(String.Empty) Or StrEnter.Equals(String.Empty)) Or StrExist.Trim.Equals(String.Empty)) Then
                            SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                            BubbleEvent = False
                            Exit Sub
                        End If
                        For ii = Row To DBtable.Rows.Count - 1
                            If Convert.ToString(DBtable.GetValue("ColName", ii)).Trim().Equals(StrName.Trim()) Then
                                SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Duplication Not Allowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                                oForm.Mode = SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
                                BubbleEvent = False
                                Exit Sub
                            End If
                        Next
                        If CDbl(StrName) < 0 Then
                            SBO_Application1.StatusBar.SetText("Invalid values provided!Blank values not vllowed", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
                            BubbleEvent = False
                            Exit Sub
                        End If
                    End If
                Next Row
            Catch ex As Exception
                SBO_Application1.MessageBox(ex.Message)
            End Try
        End Sub

    Hello there
    sir i want to Add Update and delete these three basic operation onto the Matrix, Sir u game me a Sample code of Delete a specific Column...
    Sir can u do me a favour pls leave every thing n just told me how to update a matrix ,like i have to fill the matrix field through the DATABASE table now i want to update the DataBase table from the matrix..
    i just only know thta i have to fill back database table with the help of FLUSHTODATABASE()
    here is my Sample Code...n i have to update in the validate portion...
    Public Sub HandleEventts_Allowance(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByRef BubbleEvent As Boolean)
            Try
                Dim oCellValue As SAPbouiCOM.EditText
                If FormUID.Equals("Allowance") Then
                    If (pVal.ItemUID = "MatAllow") Then
                        If pVal.Row = 0 Then Exit Sub
                        o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                        If (pVal.Row > o_Matrix.RowCount) Then Exit Sub
                        oForm = SBO_Application1.Forms.Item(FormUID)
                        If (pVal.ItemUID = "1" Or EventEnum = SAPbouiCOM.BoEventTypes.et_CLICK) Then
                            o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
                            If pVal.ColUID = "ColName" And pVal.BeforeAction = True Then
                                If pVal.Row = 0 Then Exit Sub
                                oCellValue = CType(o_Matrix.Columns.Item(pVal.ColUID).Cells.Item(pVal.Row).Specific(), SAPbouiCOM.EditText)
                                If (oCellValue.Value.Trim().Equals(String.Empty) And o_Matrix.RowCount <> pVal.Row) Then
                                    SBO_Application1.StatusBar.SetText("Invalid Allowance ID: Blank Value Not Allowed", )
                                    oCellValue.Active = True
                                    BubbleEvent = False
                                    Exit Sub
                                End If
                            End If
                        End If
                    End If
                End If
                Validate(pVal, EventEnum, FormUID, BubbleEvent)
            Catch ex As Exception
                SBO_Application1.MessageBox(ex.Message)
            End Try
        End Sub
    Public Sub Validate(ByRef pval As SAPbouiCOM.ItemEvent, ByRef EventEnum As SAPbouiCOM.BoEventTypes, ByVal FormUID As String, ByRef BubbleEvent As Boolean)
            Dim str, str1 As String
            Dim checkbox1, Checkbox2 As SAPbouiCOM.CheckBox
            Dim o_Matrix As SAPbouiCOM.Matrix
            Dim Sum As Integer
            Dim oRecordset As SAPbobsCOM.Recordset
            Dim Container As Integer
            Dim Count As Int32
            o_Matrix = SBO_Application1.Forms.Item(FormUID).Items.Item("MatAllow").Specific
            oRecordset = o_CompanyObj.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            Try
                For Count = 0 To DBtable.Rows.Count - 1
                    CodeFill = Convert.ToString(DBtable.GetValue("Name", Count).Trme())
                    NameID = Convert.ToString(DBtable.GetValue("ColUID", Count).Trim())
                    Price = Convert.ToString(DBtable.GetValue("ColPrice", Count).Trim())
                    Quantity = Convert.ToString(DBtable.GetValue("ColQuant", Count).Trim())
                    Total = Convert.ToString(DBtable.GetValue("ColTotal", Count).Trim())
                    checkbox1 = o_Matrix.Columns.Item("ColSEnter").Cells.Item(Count).Specific
                    Checkbox2 = o_Matrix.Columns.Item("ColSExist").Cells.Item(Count).Specific
                    If (checkbox1.Checked = True) And (Checkbox2.Checked = True) Then
                        Dim Sql As String
                        Sql = "Update [@Supplier] Set U_Price=' " & Price & " ',U_ID=" & NameID & "Where Name ='" & CodeFill & " '"
                        oRecordset.DoQuery(Sql)
                    End If
                Next Count
                SBO_Application1.MessageBox("Record was Updated")
            Catch ex As Exception
                SBO_Application1.MessageBox(ex.Message)
            End Try
        End Sub

  • Error while running a sample code

    Hello,
    I 'm getting the following error while i'm trying to run a
    sample code which I have imported into Flex 3.
    ===================================================================
    Severity and Description Path Resource Location Creation Time
    Id
    unable to open 'C:\Documents and Settings\sn55179\My
    Documents\Flex Builder
    3\FlexForDummies_Chapter3_Code\libs'FlexForDummies_Chapter3_Code
    Unknown 1237909480511 215
    ===================================================================
    Can anyone help me in resolving this issue.
    Many thanks in advance.

    It's very frustrating that FB stops working when the libs
    folder is missing. If you are checking in project files to a source
    control app like Perforce, empty folders don't get added, so if you
    don't add an initial dummy file, the next time you do a clean sync,
    the libs folder may not be there, and even though there is nothing
    there, FB complains. :-(

  • How to create a database for sample code from Tutorial/Book?

    I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
    I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
    I'm feeling overwhelmed with these links describing how to create a database:
    [http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
    [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
    [http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
    (1) What is the command to list the existing databases?
    (2) What is the command to delete an existing database?
    (3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
    Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
    (4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
    (5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
    (6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
    Thanks
    Siegfried
    Edited by: user8816970 on Sep 26, 2012 12:01 PM
    Edited by: user8816970 on Sep 26, 2012 12:18 PM

    user8816970 wrote:
    Paul,
    Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
    Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
    When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
    username=sysdba
    password=
    I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
    So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
    OK, sqlplus let me in with out a password, why does not this work?
    So I try checking the box for "OS Authentication" and I get the same error!
    Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
    Everyone:
    Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
    OK, so I run sqlplus and issue these commands
    create user siegfried identified by abc ;
    grant connect to siegfried ;
    connect siegfried/abc;
    Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
    Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
    So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
    I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
    So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
    Thanks!
    Siegfried
    >Paul,
    Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
    Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
    When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
    username=sysdba
    password=
    I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
    So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
    OK, sqlplus let me in with out a password, why does not this work?
    So I try checking the box for "OS Authentication" and I get the same error!
    Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
    Everyone:
    Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
    OK, so I run sqlplus and issue these commands
    create user siegfried identified by abc ;
    grant connect to siegfried ;
    connect siegfried/abc;
    above does NOT use SQL*Net to connect to the instance
    >
    Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
    Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
    So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
    I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
    So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
    >
    Thanks!
    Siegfrieda database in SQL Server is same as schema/user in Oracle

Maybe you are looking for