Samsung Brightside does not completely charge
I just got the Samsung Brightside and started charging the phone today. It's been charging for more than 8 hours and it still shows "Battery Charging". I'm wondering how long it takes for the phone to completely/fully charge. Anybody had/having this issue?
I recently had the same problem! Try to do a full charge cycle. That means to drain the battery fully, then charge it without interruption for about 3 hours. There are apps on the app store to help you do this! If you are using ipod 4gen or 3gen, don't replace the battery. If you are using a 2gen ipod, you might need to replace the battery. Go to ifixit.com!
Similar Messages
-
so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it. -
Samsung Brightside will not shut off.
My Samsung brightside will not shut off. Have to remove battery. Did master reset to no avail. Charging port is clean and never exposed phone to water. HELP!
Hello Four_Soups,
That is incredibly strange! I'm so sorry your son is having this issue. I will be delighted to check into this and see what we can do.
I checked my resources and I didn't see any other recorded reports of this same issue. I truly appreciate you trying to reboot the phone as I would have suggested this as well.
Since you've already completed that step, I would ensure all of his personal information is backed up such as contacts and media (pictures, etc) and reset his phone:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=54099
Please let us know how this worked out!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
Battery shows charging but stuck on 28% and does not hold charge
i am using HP DV6-6107tx, i got a new extended battery from anker which seemed to be running fine untill it discharged while i was playing watch dogs.
now my laptop wouldn't power on just on the battery, everything works fine if it is on charging, but the battery does not hold charge and my system powers off immediately on removing AC adapter. the battery shows "28% Charging" but does not increase or decrease the percentage even after hours of charging both while system is on and off.
i checked the battery in battery test from HP Support Assistant and it says that the battery status is ok, now i have tried the below methods with no luck :
power off and press power button methods.
uninstall and reinstall battery from device manager methods.
battery check from HP Assistant.
updating Bios to F.1b method.
updating the HP Support Assistant.
and all the other methods i could think of or read on HP's site.
can anyone guide me as to what is the issue here ? i don't have another machine to test my battery on, the charging lights are fine except that the light does not change color which it did on full charging the battery. i did try on 2 different adapters.
now if it were a motherboard or IC issue, would it not have said 'not charging' in windows ? in my case it says charging.
any help would be greatly appreciated.Hello, M_Bilal
Welcome to the HP Forums.
That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
Let me know how things go, with the route you choose to troubleshoot.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Hello, I recently bought a nokia c6.Charging does not complete while it is switched on. I waited more than 6 hours but it was not completed and battry drains after 8-10hours. but it get fully charged if i switched off and charge. what should i do?
It may be that something is using up battery in the background that uses it up faster than you can charge it. For example, leaving Joikuspot on has the same effect. As for 8-10hrs of battery life, it depends on how you set it up, as personally, after I set up a phone to my personal settings, that how long mine will last.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks
To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct. -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?
Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. -
Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?
iPhone not appearing in iTunes
-
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
Visual Approval Action does not complete
Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
AnilGeorge,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help. -
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD -
I can't get iWeb started. It does not complete the starting procedure
I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?
Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year -
When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue
The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!! -
When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari
Maybe you are looking for
-
My built in webcam won't turn on
my built in webcam will not turn on
-
2 lines for agents on weekly summary report
I have used the attached report definition to run a report, when running it on the customer site, although I believe the week runs Monday - Sunday, when I run the report, whether it is Monday - Sunday 11th Feb - 17th Feb, or Sunda
-
How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.
-
Dear Team, Suddenly my PC shut down (it was running without AC, with quite high battery level though). It was running on "power saver mode" so even if the battery level was low, it should have gone to hibernate. When I connect the AC, the LED does no
-
Aggressive Load Balancing Per SSI
Hey team, I was looking through some docs but couldn't find out "WHEN" aggressive load balancing would be available per SSID on a WLC. Does anyone have any feedback on this particular topic? We have some legacy clients and we want to segregate them