San Rafael, CA--large residential area with NO cell, and NO data service--area rated by Verizon tech as "ALL COVERAGE BAD", multiple complaints--but no response by Verizon

Dear Verizon Wireless Executives,
I am writing to let you know that I (and many of my neighbors) are on the verge of switching to ATT, due to terrible reception in my home neighborhood. 
I moved to Dominican neighborhood in San Rafael in March 2014, where I bought a house. I discovered that Verizon cell service varies from non-existent to terrible, both for data and cell service. At best I might get 1x data, and 0 or 1 bar for cell. All calls are dropped within 15 seconds. Data typically does not work.
My response was to first purchase and install a network extender. However, due to the size and configuration of my home,  I discovered that I needed a second extender to cover the whole house. This has led to new problems—the two extenders “compete” and if I start a call in one part of the house and move 1 or 2 feet too far in the other direction, I lose the call.
ATT has a powerful cell tower on the ridge above my neighborhood, which consistently produces 5 bars. It sits on a ridge in the Marin Open Space, likely on an old Nike base radio tower. (there are numerous towers on this ridge as a result of the abandoned Nike missle site).
I have begun to organize in my neighborhood—Dominican/Black Canyon Home Owners Asssociation, with about 1200 homes. When I posted a message asking about other people’s experience with Verizon Wireless, I was inundated with at least 30 or 40 angry and frustrated messages from Verizon customers, on NextDoor, a neighborhood listserve.
Today I completed a long Verizon Wireless “trouble ticket”, number NRB000007366782. I was told that there have been many, many complaints from this neighborhood for both data and cell coverage, or more to the point, lack of coverage. Your records indicate that this neighborhood is considered within Verizon as a “1X marginalization area”. And yet ,  currently there is no plan at Verizon to remedy this situation.
I strongly encourage you to begin an immediate search for access to one of the many existing towers on the ridge above my house to place a Verizon cell station.
In the event that you choose to continue to ignore this neighborhood and it’s abysmal coverage, I will organize a mass defection of Verizon Wireless residents to switch to ATT. I encourage you to begin this process now, let me and the neighborhood know of your plans, and have it completed in six months. If we have  not heard from you within 1 month (November 21, 2014), we will switch to ATT en masse beginning in December.

That is not going to happen due to a myriad of reasons.
1- Verizon listed the area correctly. So its not deceiving the customers. So based on that I would have left for a better provider.
2- Verizon cannot just pop out and place service on any tower or property. They must gain permission to place signal towers in locations. They must secure the approval of villages, towns, cities or counties to even think of putting service towers up. This can take years.
Then if the approval is opposed and no other sites can be obtained your service stays as it is. This is not a carrier fault. Go after the town boards and elected officials that will not allow their placement.
And blame the majority of people who also oppose these towers etc. Based on scares of cancer, birth defects, and even people having seizures. Yep read up on it.
Your speaking for your neighbors is admirable but futile. You cannot get what you want in 6x6 months.
http://www.at.com
Good luck to you all

Similar Messages

  • How do i save a calender i have created with the photo and the dates saved on separate pages?

    how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages?  when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page.  This is causing problems when i print.

    Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
    1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
    Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
    2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
    3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
    4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
    5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
    So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
    I hope this helps!

  • Please help to get onhand stock report with last purchase and billed date warehouse and item wise

    please help to get onhand stock report with last purchase and billed date warehouse and item wise

    Hi Rajeesh Ambadi...
    Try This
    SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',  
      T1.LASTPURDAT ,t1.LastPurPrc
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
    WHERE
    T0.ONHAND>0
    AND T0.WhsCode ='[%0]'
    Hope Helpful
    Regards
    Kennedy

  • HT204088 Dear sirs,  Could you please help me on my problem with my apple ID  I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,  My account have 50$ and stil

    Dear sirs,
    Could you please help me on my problem with my apple ID
    I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
    My account have 50$ and still didn't buy anything

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (100546)

  • Can message filters cause messages with blank subject and 1969 dates

    I have done many things to try to trace why I get messages with blank subjects and 1969 dates.
    downloaded TB
    created all new folders
    moved only persdict and msfFilterRules to the new profile.
    At this try
    set the option NOT to download messages on startup
    went off line and compacted all folders.
    emptied the inbox and all subfolders.
    Exited TB.
    deleted all files under pop.verizon.net except msgFilters rules.
    Deleted all msf files for local folders in my profile.
    opened TB.
    a few times
    --With Firefox went to verizon webmail and moved a few messages to the Verizon inbox.
    --moved to TB window
    -- Clicked <get messages>
    -- still received blank messages with 1969 dates
    -- deleted those messages
    -- emptied trash
    went to the filter rules and unclicked all filters that send files to local folders
    left 2 rules in place
    (1) if a sender was in my address list send the message to inbox folder called "Known sender"
    (2) if the subject was NOT a weird string like "&*%$@!+=?><" send the message to inbox folder called "Suspicious" This filter is because there is not an ELSE function in TB it is extremely unlikely that a message would have such a subject.
    [These two filters should move all messages except junk to the two folders.]
    I then tried the above procedure of going to Verizon, moving messages to Verizon Inbox, etc. a few times.
    I did NOT get the messages with blank subject and 1969 date!!
    Questions:
    (1) Is this just a fluke?
    (2) From understanding the internals of TB is it reasonable that some now-unchecked message filter(s) had caused there to be the oddball messages?
    (3) if It is a filter rule, how can I find out which one it is?

    I looked though all the condition specification options I do not see how using header info in a condition specification would '''change '''the header info.
    I looked at the possible actions on filters.
    I only see "tag" and "Star" as ones that might change header info.
    However, I found out that when I unchecked the first 17 of 19 filters and just had the two I explained above I would sometimes get a message with the 1969 date.
    Since then I deleted those two rules and made new versions and moved them to the bottom where the earlier versions had been. I have not had the 1969 messages since!!
    I have put a new filter at the top of the list that checks whether the date is before 1/1/971. If teh date is before 1/1/1971 the filter tags the message as important and moves it into the inbox folder named "Suspicious".
    I have not seen any 1969 messages since then.
    Since the problem was intermittent and because I was not able to create conditions whereby The 1969 dates would or would not occur, the problem may not be 'fixed'. I'll watch it for a while
    Meanwhile, I'll continue to manually go though the webmail on Verizon and as a test only download mail that I do not want to save for the long term. Messages I want to keep I'll move messages I want to keep for the long term into foldrs on Verizon. '''If '''after a while, I do not get any more of the 1969 messages, I'll move messages I want to keep into the Verizon inbox and download them into TB

  • Hello I have a problem with security questions and i cant reset to my email  The error was   Exceeded Maximum Attempts  We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

    Hello
    I have a problem with security questions and i cant reset to my email
    The error was
    Exceeded Maximum Attempts
    We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
    You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
    Click here      for assistance.
    i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
    http://www.traidnt.net/vb/attachment...134863-333.jpg
    can you help me please

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • ACS issues in large scale network with Prime Infra and WAAS express

    Hi,
    I wonder if there is a common practice or a recommended way for deploying large scale network where there are Prime Infrastructure (PI) and WAAS Central manager keep logging into routers (scale of 1000 or more) to collect statistics. The way PI and WAAS CM collect stats from the routers (besides using SNMP) is that they log in (authenticate) themselves with there usernames and password and issue multiple show and config commands on the routers. Imagin this routine happens every 5 - 10 minutes with all 1000+ routers at the same time and the impact to the ACS server in terms of authentication requests and AAA logs. Appreciate if somebody could recommend a solution where these elements can work together in a large scale network.
    Thanks,
    Tos

    The AEBS is connected to the TC via an ethernet run from the basement to the main floor... its not connected wirelessly.
    The "extend" feature is intended for wireless, not wired connections. Since you have the base stations connected by Ethernet, the downstream router just need to be reconfigured as a bridge. The bridged router would then perform as a combination Wireless Access Point and Ethernet switch. Neither base station should be configured for "extending."
    Basically, you will want both to be configured for a "roaming" network.
    o Setup the base station connected to the Internet to "Share a public IP address."
    Internet > Internet Connection > Connection Sharing: Share a public IP address
    o Setup the remaining base station(s), as a bridge.
    Internet > Internet Connection > Connection Sharing: Off (Bridge Mode)
    For each base station in the roaming network:
    o Connect to the same subnet of the Ethernet network
    o Provide a unique Base Station Name
    o The Network Name should be identical
    o If using security, use the same encryption type (WEP, WPA, etc.) and password.
    o Make sure that the channel is set at least three channels apart from the next base station.
    while the TC is running at 2.4ghz since my MBP is connected at speeds around 240 to the AEBS at the same time that my ipod is connected to the TC at speeds of only 54 max.
    The iPod is a 802.11b/g wireless device. It cannot connect at greater than the maximum bandwidth for that mode ... which is 54 Mbps, regardless of the bandwidth available.

  • Xmlgen.getxml Nested Cursors with LONG RAW and BLOB Data Types

    I am trying to use a nested cursor with xmlgen.getxml that has a long raw or blob column. In either case, it will not return to me any data in the xml document pertaining to that LONG RAW or BLOB column. If I do not use a nested cursor, it works fine.
    Example:
    SELECT xmlgen.getxml('SELECT x, CURSOR(SELECT y FROM y_tab WHERE y_tab.x_id = x_tab.x_id) y FROM x_tab') FROM dual;
    This will not produce the information I am after.
    However, simply running:
    SELECT xmlgen.getxml('SELECT y FROM y_tab WHERE y_tab.x_id = <somevalue>') FROM dual;
    Works???
    Any ideas out there? Does anyone know if DBMS_XMLQUERY has this limitation?
    Thanks,
    Brad

    It doesn't appear that I am able to attach the PDF files.  Can you supply your email (or I can supply mine) so I can send you the three files:
    1.)  A good PDF (manually extracted from our old application)
    2.)  Dump of the same PDF file (includes header/footer info)
    3.)  A partially fixed PDF file (but some of the pictures / pages are cut off - specifically pages 3,5,9,10,12,14)
    The way that we have tried to fix the file (in example 3 above) is the following:
    a.)  Find the First Occurrence of "%PDF-"
    b.)  Find the Last Occurrence of "%%EOF"
    c.)  if the first "%PDF-" is found AND the last "%%EOF" is found, then
       i.)  Remove all data before the first %PDF-
       ii.)  Remove all data after the last %%EOF
    Let me know if you need any other information.
    Thanks,
    Mike

  • Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3.  Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

    Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

    razzbust wrote:
    ...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
    Self explanatory.
    You could try creating an iPod version of the films.
    Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

  • Problem with Create PDF and linked data

    Using Acrobat X standard.
    I have a Word 2010 doc with links to Visio and Excel data. 
    When using the CreatePDF option from Word, I consistently get a prompt asking whether I want to update the linked data before creating pdf.  I would like to either (1) turn this prompt off or (2) -- less preferable -- have the linked data always update without prompting.
    Is thre a setting that would accomplish one of these two solutions?
    Thanks,
    Craig
    PS.  All settings in Word have been set such that data IS NOT updated when printing on a regular printer.

    You can print to Adobe PDF.

  • On Hand QTY help with adding Lot and Expiration Date

    I need assistance with including the Lot Number and Expiration Date to the query below, can someone please help me with this.
    select mp.organization_code org_code
    , msi.segment1 item_code
    ,msi.description
    ,SUM (mmt.transaction_quantity) quantity
    ,mmt.subinventory_code
    ,msi.primary_uom_code  UOM
    from mtl_system_items_b msi
    , mtl_material_transactions mmt
    , mtl_parameters mp
    where msi.inventory_item_id = mmt.inventory_item_id
    and msi.organization_id = mmt.organization_id
    and mp.organization_id = mmt.organization_id
    and mp.organization_id = msi.organization_id
    and msi.organization_id = XX
    and mmt.subinventory_code = 'XXXX'
    group by msi.segment1
    ,msi.description
    ,mmt.subinventory_code
    ,msi.primary_uom_code
    ,mp.organization_code
    having SUM (mmt.transaction_quantity) >= 0
    order by 2;

    GKaiseril,
    Yes,
    I'm aware of JS API Reference disclaimer on page 277. I am executing it from folder level script. The script hasn't changed in 2 years and worked fine in Adobe versions 7.0 through 9.3.2. It stopped working when Adobe released version 9.3.3.
    I can make the script do nothing but
    this.closeDoc(true);
    so that there is no reference to the document after it closes. I still get a fatal error:
    Expected a dict Object
    Followed by Microsoft Error report
    Followed by:
    Runtime error!
    Program: C:\Program Files\Adobe\Reader9.0\Reader\Acrord32.exe
    R6025
    -pure virtual function call
    Then Reader closes.
    All our users have rolled back to Reader 9.3.2 and the problem went away.
    I don't believe it is related to the location of the method ...rather something Adobe changed between version 9.3.2 and 9.3.3.
    Cheers!
    Doug

  • So frustrated with Droid Charge and the Customer Service

    Going to receive my 5th Droid Charge tomorrow!  Phone drops calls, phone shuts down when taking pictures, battery last for 2 hrs and there are no batteries in stock.  The CSR told  me to go to Amazon and order on and then Verizon will reimburse me...yeah, right!  Or they will give me a Thunderbolt which I checked out after I got off of the phone and it doesn't sound any better.  Can't understand why I have to settle for a phone that doesn't work most of the time.  I have never been late on paying my bill and expect better quality and service than I am receiving.
    No real recourse...take it or leave it attitude when speaking to ALL Verizon employees!  They say they care but the service doesn't reflect their words.  Been a customer for over 17 years and hate to move to another company and sure don't feel I should have to pay to get out of a contract on a phone that I have to shut down and bring up again when I need to make a call or send a text.  SO FRUSTRATED!!!!!!!

    We have two droid charge phones that we got in April on Amazon.  We are trying to troubleshoot with Samsung and getting not much help.  Phone dies quickly at times, but not other times.  It consistently shuts off when taking pictures, though, on both phones.  It is clear to us that the phone has a problem because we have two.  I've seen two work-arounds.  One is getting a bigger battery that requires a new larger phone back.  The other is to put the phone in Airplane Mode.  Apparently, this problem is due to a "power load" issue.  So, the phones are inherently defective. 
    We likes the phones and at times we have fooled into thinking they are working fine... because at times the camera works fine. We haven't had any replacement phones because it seems that so many have this issue and therefore, what is the point.  We would like to know if other Droid Charge cameras don't have this issue because we expect to be able to use the camera.  We have 3 little boys and we already have lost pictures from the last day of school because we counted on this phone.  Sounds like a small problem until you look at it that way. 
    Really wish Amazon, Verizon or Samsung could get us a good solution.

  • Problem with SQL*Loader and different date formats in the same file

    DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    System: AIX 5.3.0.0
    Hello,
    I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
    ...;2010-12-31;22/11/1932;...
    I load this data using the following lines in the control file:
    EXECUTIONDATE1     TIMESTAMP     NULLIF EXECUTIONDATE1=BLANKS     "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
    DELDOB          TIMESTAMP     NULLIF DELDOB=BLANKS          "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
    The relevant NLS parameters:
    NLS_LANGUAGE=FRENCH
    NLS_DATE_FORMAT=DD/MM/RR
    NLS_DATE_LANGUAGE=FRENCH
    If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
    How can I get both date values to load correctly?
    Thanks!
    Sylvain

    This is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(

  • Newbie:how to create a page with 4 textfields and send data to MySql DB

    Dear all,
    i have created a page called page1 with 1 submit button named 'submitButton' and 4 textfields named:
    'date'
    'item'
    'contact'
    'phone'
    I have created a MySql DB table with the schema named 'association' and table named todolist3. Fields created in the table are :
    'Date' - >INTEGER->Primary
    'Item' ->VARCHAR(100)
    'Contact' ->VARCHAR(45)
    'Phone_contact' ->INTEGER
    what i want to do is to send the data from the 4 textfields to the database when i click the submit button. Below is the code i out in submit button. please kindly help as i have tested different ways but none of them works. thank you!!!
    public String submitButton_action() {
    try {
    if ( todolist3DataProvider.canAppendRow() )
    String item1=(String)item.getText();
    String contact1=(String)contact.getText();
    Integer phone1=(Integer)phone.getText();
    Integer date1=(Integer)date.getText();
    RowKey rowKey = todolist3DataProvider.appendRow();
    todolist3DataProvider.setCursorRow(rowKey);
    todolist3DataProvider.setValue("todolist3.Date", date1);
    todolist3DataProvider.setValue("todolist3.Item",item1);
    todolist3DataProvider.setValue("todolist3.Contact",contact1);
    todolist3DataProvider.setValue("todolist3.Phone_contact",phone1);
    } else {
    error("submitButton_action() -- cannot append todolist3 record");
    } catch (Exception e) {
    error("Page1::submitButton_action-- something's wrong trying to append todolist3 record");
    return null;
    }

    Hi,
    I think that you have forgotten to commit changes. Modify your code to look like this:
    RowKey rowKey = todolist3DataProvider.appendRow();
    todolist3DataProvider.setCursorRow(rowKey);
    todolist3DataProvider.setValue("todolist3.Date", date1);
    todolist3DataProvider.setValue("todolist3.Item",item1);
    todolist3DataProvider.setValue("todolist3.Contact",contact1);
    todolist3DataProvider.setValue("todolist3.Phone_contact",phone1);
    // commit your changes !!!
    todolist3DataProvider.commitChanges();
    } else {
    // ....best regards
    Grzegorz

  • Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!

    I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
    I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
    Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
    So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
    So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
    I have the gateway 2WIRE model(2701HG-B) modem/router.
    Is there something wrong? what do I have to do to make this work?

    Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.

Maybe you are looking for