SanDisk read only after update

I'm using a micro sandisk for my blackberry that i was able to read and write to now i'm unable to write After getting info on the card is when i found out. the card won't mount when in the blackberry, it will only mount when using a adapter card reader.
I've tried repairing permissions ,reformatting the with the option in the blackberry which it formats it to a fat32. with it being a fat 32 format i thought i would be able to read and write but not the case any help would be great thanks

roam wrote:
ls -al /Volumes/BLACKBERRY
total 128
drwxrwxrwx 1 Faceof1 staff 32768 21 Oct 23:07 .
drwxrwxrwt@ 7 root admin 238 25 Oct 09:10 ..
drwxrwxrwx 1 Faceof1 staff 32768 21 Oct 23:07 BlackBerry
thats what i get from terminal. so from what i understand the root and admin is the only one that has full access so i should have no trouble being since I'm the admin right?

Similar Messages

[SOLVED]root partition read only after update systemd

After update systemd today, the systemd-remount-fs.service fail to start. Root filesystem is read only I tried add rw to fstab mount option, but the root parition is still read only. I noticed that util-linux package are installed and udev package is dropped , Does it related to my problem?
Please advice me.
Sorry for my bad English.
Update
After downgard util-linux package, the system work again
Update 2
UUID in grub.conf and fstab are inconsistent, Thanks to tomegun for point out this problem.
Last edited by aduser (2012-06-08 04:05:59)

output of systemctl status systemd-remount-fs.service
systemd-remount-fs.service - Remount Root and Kernel File Systems
Loaded: loaded (/usr/lib/systemd/system/systemd-remount-fs.service; static)
Active: failed (Result: exit-code) since Sun, 03 Jun 2012 01:17:42 +0800; 5min ago
Process: 132 ExecStart=/usr/lib/systemd/systemd-remount-fs (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-remount-fs.service
fstab
UUID=55326b3a-eec9-498e-8e20-0a7ddd8daf9a / btrfs rw,compress=lzo,space_cache,autodefrag 0 1
UUID=54c17991-716b-496e-a89b-4e978f2d92a4 /boot ext2 defaults 0 1
systemctl
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devi...d-card1.device loaded active plugged RV630 audio device [Radeon HD 2600 Series]
sys-devi...d-card0.device loaded active plugged 82801I (ICH9 Family) HD Audio Controller
sys-devi...et-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
sys-devi...dd-sdd1.device loaded active plugged ST3120213A
sys-devi...dd-sdd2.device loaded active plugged ST3120213A
sys-devi...ock-sdd.device loaded active plugged ST3120213A
sys-devi...da-sda1.device loaded active plugged WDC_WD6400AAKS-22A7B0
sys-devi...da-sda2.device loaded active plugged WDC_WD6400AAKS-22A7B0
sys-devi...da-sda3.device loaded active plugged WDC_WD6400AAKS-22A7B0
sys-devi...da-sda5.device loaded active plugged WDC_WD6400AAKS-22A7B0
sys-devi...ock-sda.device loaded active plugged WDC_WD6400AAKS-22A7B0
sys-devi...db-sdb1.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...db-sdb2.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...db-sdb3.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...db-sdb4.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...db-sdb5.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...ock-sdb.device loaded active plugged WDC_WD1002FAEX-00Z3A0
sys-devi...dc-sdc1.device loaded active plugged ST980811AS
sys-devi...dc-sdc2.device loaded active plugged ST980811AS
sys-devi...ock-sdc.device loaded active plugged ST980811AS
sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devi...y-ttyS0.device loaded active plugged /sys/devices/pnp0/00:07/tty/ttyS0
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
xs-big.mount loaded active mounted /xs/big
xs-dev-\...pace\x5d.mount loaded active mounted /xs/dev/[workspace]
xs-dev.mount loaded active mounted /xs/dev
xs-dl.mount loaded active mounted /xs/dl
xs-file.mount loaded active mounted /xs/file
systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
console-...daemon.service loaded active running Console Manager
console-...-start.service loaded failed failed Console System Startup Logging
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running dhcpcd on eth0
gdm.service loaded active running Gnome Display Manager
[email protected] loaded active running Getty on tty1
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-...unt-fs.service loaded failed failed Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...rigger.service loaded active exited udev Coldplug all Devices
systemd-udev.service loaded active running udev Kernel Device Manager
systemd-...nlevel.service loaded failed failed Update UTMP about System Runlevel Changes
systemd-...ssions.service loaded active exited Permit User Sessions
systemd-...-setup.service loaded active exited Setup Virtual Console
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...control.socket loaded active listening udev Control Socket
systemd-...-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
74 units listed. Pass --all to see inactive units, too.
grub2 conf
menuentry 'Broken' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-852c733e-be0d-4375-8668-d7ae049295a9' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 54c17991-716b-496e-a89b-4e978f2d92a4
else
search --no-floppy --fs-uuid --set=root 54c17991-716b-496e-a89b-4e978f2d92a4
fi
echo 'Loading Linux ck kernel ...'
linux /vmlinuz-linux-ck root=UUID=852c733e-be0d-4375-8668-d7ae049295a9 ro rootflags=subvol=broken quiet add_efi_memmap elevator=bfq
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux-ck.img
The update packages
core/btrfs-progs 0.19.20120328-2 2 -> 3
core/device-mapper 2.02.95-4 4 -> 6
core/cryptsetup 1.4.2-1 1 -> 2
core/gpm 1.20.6-7 7 -> 8
core/lvm2 2.02.95-4 4 -> 6
extra/libglapi 8.0.3-1 1 -> 2
extra/libgl 8.0.3-1 1 -> 2
extra/ati-dri 8.0.3-1 1 -> 2
extra/bluez 4.99-2 2 -> 6
extra/consolekit 0.4.6-3 3 -> 4
extra/gvfs 1.12.3-1 1 -> 2
extra/gvfs-obexftp 1.12.3-1 1 -> 2
extra/libatasmart 0.18-1 1 -> 2
extra/libcanberra 0.28-4 4 -> 5
extra/libpulse 2.0-1 1 -> 2
extra/libcanberra-pulse 0.28-4 4 -> 5
extra/mesa 8.0.3-1 1 -> 2
extra/pulseaudio 2.0-1 1 -> 2
extra/xf86-video-ati 6.14.99-0.20120517 0.20120517 -> 1.20120517
community/libvirt 0.9.12-7 7 -> 8
community/ttf-ubuntu-font-family 0.80-2 2 -> 3
multilib/lib32-libglapi 8.0.3-3 3 -> 3.1
multilib/lib32-libgl 8.0.3-3 3 -> 3.1
==> Software upgrade (new version) :
core/util-linux 2.21.1-2 -> 2.21.2-1
core/e2fsprogs 1.42.2-2 -> 1.42.3-1
core/libpipeline 1.2.0-2 -> 1.2.1-1
core/libsystemd 44-7 -> 184-2
core/procps-ng 3.3.2-2 -> 3.3.3-1
core/systemd 44-7 -> 184-2
core/systemd-sysvcompat 3-1 -> 184-2
extra/pixman 0.24.4-1 -> 0.26.0-1
extra/xorg-server-common 1.12.1.902-1 -> 1.12.2-1
extra/xorg-server 1.12.1.902-1 -> 1.12.2-1
community/libuser 0.57.1-2 -> 0.57.6-1
community/os-prober 1.49-3 -> 1.53-1
community/systemd-arch-units 20120412-6 -> 20120528-3
repo-ck/linux-ck-corex 3.3.7-1 -> 3.4-1
repo-ck/linux-ck-corex-headers 3.3.7-1 -> 3.4-1
==> New package :
core/systemd-tools 184-2 (required by systemd)
Does the systemd not support btrfs subvolume as root partition??
Last edited by aduser (2012-06-02 17:45:39)

Changing a Record to Read-Only after an event.

I have a Developer application that needs to be modified. This
application includes several fields as well as a comments
field. I'd like to change all updatable fields (not to included
the comments field) to READ-ONLY after a certain event. Then
after a certain date, I'd like to make the comments field READ-
ONLY.
Do you have any suggestions?
Regina Grimes
919/874-3140
null

Dear Regina,
Have you tried to set_block_property in pre-record trigger to update allowed/not allowed depending on the event. And in post-record update not allowed. These triggers must be on block level. Also on item level to the item 'Comment' define pre-item trigger where take a new decision whether you want to open the entire block or not, the same way as on block level triggers. But in post-item trigger always make the entire block read-only again.
Regards
Jan Kramle

Hi,my apple tv show me only computers and settings only after update the new software

Hi my apple tv show me only computers and settings only after update the new software

Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

Hi vpraghu,
If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Make a field required on record creation, read only after that

Hello,
Does anyone know of a way to make a pick-list field required on record creation, but read-only after that? The other twist to this is that we need to allow this field to also be read-write for all the integration edits, since this field's value could change in the enterprise database.
Thanks,
Neal G.

Hi !
I think you can add a validation rule for that. Something like :
IIf(PRE('<YOURFIELD>') IS NULL, <> '', = PRE('<YOURFIELD>'))
This means that if the previous value of your field is null (it's a creation), so the value must be different than blank. Else, it must be equal to the previous value, so not modified.
I didn't tested it, but I let you get back to me if it works... or not !
You'll just have to add a message saying that this field is required on creation and readonly after...
Hope this will help, feel free to ask more !
Max

Word 2010 document becomes Read-Only after saving it

Hi,
My Word 2010 document is becoming "Read Only" after saving it, for information my doucment is on the desktop . I searched on this forum and find a couple of solutions (deactivating auto saving, etc.) but it does not work at all. Any other ideas?
Thanks,
Sylvain.

, I wonder why the docuemnt is becoming Read-Only when I am saving it on the Desktop...
I've read articles and blogs of people arguing each side of whether you should use the Desktop as a storage folder and I really
don't have anything substantial to add to either the pro or con side of the issue.
However, what I know about Word is that it behaves a bit different and seems to have issues when you’re actively editing document that are stored
on the Desktop. I would speculate that the issue has something to do with the screen driver software.
When you’re editing a document, Word is actually using something like a dozen or more temporary hidden files and some of these are stored in the
same folder as the source document. If the source document’s folder is the Desktop, then there has to be interaction with the screen driver.
This interaction with the screen driver is one variable that makes the Desktop folder unique and possibly problematic and thus Word under certain conditions
makes the file Read Only.
Kind Regards, Rich ... http://greatcirclelearning.com

How to make fields read only after form is filled in

I am creating forms to be used within our company. The customer srv representative (CSR) would fill in the form and send it to the customer for signature and initial. There are a few issues I can't solve.
1) I need to make the rate & services fields read only after the CSR initials the form

Will the CSR have Acrobat or just Reader, and what type of computer will the CSR be using (Windows/Mac/mobile OS)? If just Reader (Wind/Mac), this is possible by setting the fields to read-only with JavaScript. The problem is this can't be considered secure, even if using a password as discussed here: Password-protect and hide one form field
With Acrobat you have the ability to flatten certain fields, which makes it a bit more difficult to change the "fields".

Make all text fields read only after signing form

Hello,
I have a live cycle form which needs to have all of the text fields set as read only after signing.
The java script has been placed in the post sign event of a digital signature field.
for(var i=0;i<this.numFields;i++) {
var cNm = this.getNthFieldName(i);
if (cNm.type = "text") this.getField(cNm).readonly = true;
After signing the form the following console error is shown:
this.getNthFieldName is not a function
Can anyone please advise how to revise the script so that when the form is signed all of the text fields become ready only?
Any assistance will be most appreciated.
Thank you.

You don't need any JavaScript to do this.
In Designer you can setup the signature field in that way, that all fields will be locked after signing.
Look here:
http://forums.adobe.com/message/3121870?tstart=2

Firefox profile folder becomes read-only after closing browser

firefox profile folder becomes read-only after closing browser
It is a problem with firefox or is it this to to a virus?
How to fix? How to prevent?

Only a check mark in the Read-only box means that a folder or file is Read-only. 
Windows doesn't check all the files in a folder so instead displays a greenish block to indicate that it is not sure. 
You need to look at the files individually to see if any are read-only. 
Easiest to do that is to make the Attributes visible in "View > Details" mode: Choose Details in Windows Explorer.

Make adobe form -read only after Submit button

Hi,
I have an Interactive form withuser input fields.
I am submitting it via E-mail.How do I make it read only after I click Submit ?
I am using javscript for sending e-mail.
rgds
vara

Resolved it : in click event javascript
ADOBE_DATA.form.field.access = "readOnly";

Make Sticky Notes Read-Only After Creation?

Hello,
I am wondering if there is a way to make sticky notes read only after someone has created one?
I have a form that we want people to add comments to but we don't want anyone to be able to remove those comments. Possible?
Kristi Tost

Resolved it : in click event javascript
ADOBE_DATA.form.field.access = "readOnly";

How to determine a View Object Type (read only or Updatable) ADF B.C 10.1.3

Hi all,
in scott Schema by ADF B.C 10.1.3, I created an entity object like emp
and created view object EmpView from emp and dept entities
and Application Module
and when draging EmpView and dropping it in jspx
while running I got an error :
JB0-25003 your EmpView View Object has no Type
How to determine a View Object Type (read only or updatable) in B.C ?
Thanks

Hi,
this should not require any manual confiuration. Can you select the ApplicationModule in the model, right click on it and run the ADf BC tester ? Check if he ViewObject runs if not added to JSF
Frank

HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy

Profile preferences reset to "Read Only" after turning it off.

I cannot start Firefox. It says it is already running. Task Manager does not show any instances running. There is no "parent.lock" file in the "......default" folder. Each time I look at the preferences for the "profile" folder, it shows "read only" is set. I clear it and the next time I look at the preferences "read only" is set.
I have uninstalled and re-installed Firefox but it still resets"read only". Looks like the profile folder has something corrupt in it.

Only a check mark in the Read-only box means that a folder or file is Read-only. 
Windows doesn't check all the files in a folder so instead displays a green block to indicate that it is not sure. 
You always need to look at the files individually. 
Easiest to do that is to make the Attributes visible in "View > Details" mode: Choose Details in Windows Explorer.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
*http://kb.mozillazine.org/Browser_will_not_start_up

SanDisk read only after update

Similar Messages

Maybe you are looking for