SAP Crystal Reports and Silverlight

is there any plan to support a native viewer for Silverlight 4 ?
Silverlight adoption is growing fast and a lot of Crystal Reports competitors have already supported this platform.
in my opinion it is a very important strategy.

Hi Marco,
We are considering adding a native Sliverlight viewer for a later release. If you've already submitted the idea to Idea Place, I'll respond there as well. If not, please do submit it to Idea Place or add your vote to an existing idea asking for Silverlight support.
Regards,
Coy

Similar Messages

Crystal Reports and Silverlight

After a bit of googling I see that Silverlight and Crystal aren't 100% as of yet.
From my own playing around, they work 100% on a development machine but as soon as you publish your app then it starts moaning. I GUESS this is because you have to specify x86 or x64 to get Crystal to work properly, but setting a "Hello World" Silverlight app to x86 or x64 causes it to no longer work.
I have however managed to build up a WCF Service for Crystal and then show a report from a Silverlight app by opening up a new browser window and using the URL to specify which report and its parameters. This approach is acceptable to us except for one missing "feature". When all I need is to generate a PDF file of a Crystal Report then I do not want show it in a new browser. This is where I run out of ideas to get this to work.
Any help or comments on any of the above would be greatly appreciated.

I may be missing something here, but when you want PDF (you do not mention if you want to view it in Adobe viewer or just an export) ;
1) Do not open up a new browser window and using the URL to specify which report
2) Use this code to export to HD:
''The path/location where the exported file will be saved
        Dim exportFilePath As String = Application.StartupPath + "exported.pdf"
        ''Set the options for saving the exported file to disk
        crDiskFileDestinationOptions = New DiskFileDestinationOptions()
        crDiskFileDestinationOptions.DiskFileName = exportFilePath
        ''Set the exporting information
        crExportOptions = crReportDocument.ExportOptions
        With crExportOptions
            .DestinationOptions = crDiskFileDestinationOptions
            .ExportDestinationType = ExportDestinationType.DiskFile
            .ExportFormatType = ExportFormatType.PortableDocFormat
        End With
        ''Export the report
        crReportDocument.Export()
3) If you want to stream to PDF viewer see the sample code in KB #[1523063|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533323333333033363333%7D.do]
There is fair bit more info on this in the developer help files also:
SAP Crystal Reports .NET API Guide
http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip
SAP Crystal Reports .NET SDK Developer Guide http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

SAP Crystal Report using SQL Server Authentication and Windows Authenticati

I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
    </div>
    </form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
    private const string PARAMETER_FIELD_NAME = "city";
    private ReportDocument customersByCityReport;
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = @"WKM1925-PCWKM1925";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.UserID = "sa";
        connectionInfo.Password = "sysadmin25";
        SetDBLogonForReport(connectionInfo);
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
    private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
        ParameterValues currentParameterValues = new ParameterValues();
        foreach (object submittedValue in arrayList)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = submittedValue.ToString();
            currentParameterValues.Add(parameterDiscreteValue);
        ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
        ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
    protected void Page_Load(object sender, EventArgs e)
        customersByCityReport = new ReportDocument();
        string reportPath = Server.MapPath("customersByCity.rpt");
        customersByCityReport.Load(reportPath);
        ConfigureCrystalReports();
        ArrayList arrayList = new ArrayList();
        arrayList.Add("paris");
        arrayList.Add("Madrid");
        arrayList.Add("Marseille");
        arrayList.Add("Buenos Aires");
        arrayList.Add("Sao Paulo");
        ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
        SetCurrentValuesForParameterField(customersByCityReport, arrayList);
        CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help me

Hello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don

Crystal Reports and SAP BO XI 3.1 License purshase

Dear Professionals,
My company is looking forward to go for Crystal Reports 2008 from BEx.
I am looking for link for purchasing license for Crystal Reports and SAP BO XI 3.1 as well.
Besides the above, i am currently working on a free trial version of Crystal Reportds and also installed Crystal Viewer to publish the reports on the portal, but it was asking for Java Connector license key.
So, in addition to the above i also want to know the pricing for License of Javas Connector (JCo)
Your help is appreciated.

Hi
the Java connector is available here
service.sap.com/connectors
Regarding licenses and pricing I would recommend to contact your local SAP sales office.
Regards
Stratos

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

Crystal Reports and SAP BW Connectivity for OLAP

Hello,
Anybody created Crystal reports off SAP BW Infocubes? For some reason I am not able to create or configure BW sever connection. I installed Crystal reports and SAP enhance cd for OLAP.
Thanks
Tom

Hello,
I was able to connect and create Crystal report based on Bex query..no connection problem there. But, reporting directly off infocubes, the server type "SAP Business Information Warehouse"(add server option in OLAP connection Browser) not showing up in list of values.
1. I released Info query for PLE DB for OLAP as per
   user's guide.
2. The manual says you have to configure SAP BW server
   log on? For Bex query(Crystal) all available servers
   automatically available
Thanks

Crystal Reports and SAP BW 7

Hi,
I have been reading these posts and got bit confused.
What do I need to integrate Crystal Reports and SAP BW 7 without BOE. My company has SAP NW license and Crystal Reports Enterprise license and plan to use CR for formatted reporting. Do I still need integration kit into SAP BW in order to create crystal reports on BEx queries and save into BW and view through the SAP NW Portal?
Or am I fine without integration kit?
many thanks

Based on the below Ingo's blog in BI expert we would only need the following:
You must install Crystal Reports Designer on the client
You must install the client components for the BusinessObjects Integration Kit for SAP Solutions
You must install an SAP front end with the SAP NetWeaver BI 7.X Add-On and the SAP BW 3.5 Add-On components on the client when using the connectivity on top of SAP NetWeaver BI
Users need to have the necessary authorizations in the SAP system. For SAP NetWeaver BI, this means that users require the authorizations to view and execute BI queries. There are additional authorizations for SAP ERP access in authorizations class ZSSI that are specific to the connectivity that BusinessObjects provides.
You must release the BI queries that you want to use with Crystal Reports for external access. You can set this property in the BI Query Designer.
So, no mention of BOE.
http://www.bi-expertonline.com/article.cfm?id=3666

Connection between Crystal Report and SAP ECC

Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.

Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo

Hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part wh

hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part which corresponds to value dates of customer like their lapses in payments for the previous months....anyone who could help me?thanks

hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part which corresponds to value dates of customer like their lapses in payments for the previous months....anyone who could help me?thanks

SAP Crystal Report 2013 on Windows 2012 and Lotus Notes Databases

Hi everybody, does someone already try to use version 2013 of Crystal Report to report Lotus Notes databases content?
We have been used older version for about 10 years without any difficulties as a native driver exist for Lotus Notes.
But installing the version 2013, we have discovered that lotus Notes is not anymore present int the list of database to connect to...
Can anyone provide sonme help?
Many thank in advance
Dominique Anderegg
Insentia SA
Lausanne - Switzerland
[email protected]

See the SAP Crystal Reports 2013 Product Availability Matrix (PAM), page 9 and download the doc linked to there. According to that doc, Lotus Notes is now only supported via ODBC only.
Also, the search string 'lotus crystal 2013' (search box in top right corner) brings up the following KBA:
1238167 - Cannot create new report off the Lotus Notes Domino native driver in Crystal Reports
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

Error when print out SAP Crystal Report in SAP B1

Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.

Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom.

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 8.1 is throws error when displaying SAP Crystal Reports 10.5

Hi there,
On windows 8.1 – 64 bit SAP Crystal Reports fails to work (even empty report):
“Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version 10.5.3700.0, culture=neutral, PublicKeyToken=blahblah' or one of its dependencies. The system cannot find the file specified.”
Project that run SAP Crystal Report was compiled as 64 bit & 86 bit & ANY CPU, but all displayed the same error message. Is windows 8.1 64 bit missing any *.dlls? Or is there compatible CRRuntime engine with windows 8.1 64 bit?
I had this problem before on windows 7 but by changing solution Platform and Target CPU – solved the problem, however windows 8.1 seems to have a bug!
More Info about app:
VisualStudio2010
SAP BusinessObjects XI 4.0
Support Pack (several been tried): crruntime_64bit_13_0_7.msi

Post Author: JonathanP
CA Forum: .NET
Are you simply viewing the report, or exporting it?
The error doesn't tell us much. A windows application should not need any special permissions. Try giving the user full rights to the temp directory, as the report engine does need to write seme files there.

SAP Crystal Reports and Silverlight

Similar Messages

Maybe you are looking for