SAP database check finished with warning

Hello All,
In sapcheck folder latest .chk file finished with following warnings
BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
BR0972I Checking database operations...
BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
Kindly help me resolve the issue.
Regards
Mohsin

>
mohsin m wrote:
> Hello All,
>
> In sapcheck folder latest .chk file finished with following warnings
>
> BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
> BR0972I Checking database operations...
> BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
>
> Kindly help me resolve the issue.
>
> Regards
> Mohsin
Hello,
The warning occurs because the database check looks for the logs of all old operations that ended with an error. The text "Last 'log' operation" means: an operation log with the extension ".log"was found for an action that ended with the (error) status RC = 3.
Since the log referred to is old (January 17), you can get rid of it by running:
brconnect -u / -c force -f cleanup -m 60
(60 is the minimum age of the logs to clean up; adapt this value to your requirements)
Also, it is a good idea to schedule the action "Cleanup logs" periodically via DB13.
Regards,
Mark

Similar Messages

Database check finish with warnings

Dear all
Please guide how can resolve this warings
oracle 9.2.0.7 ,oprating system windos 2003 advanced server sap ECC5
ORA-000060: Deadlock detected. More info in file d:\oracle\prd\saptrace\usertrace\prd_ora_6080.trc.
BR0976W Database message alert - level: ERROR, line: 108900, time: 2007-08-29 19.57.47, message:
ORA-00600: internal error code, arguments: [kdtdelrow-2], [65], [65], [], [], [], [], []
BR0976W Database message alert - level: WARNING, line: 108901, time: 2007-08-29 19.57.47, message:
ORA-00060: deadlock detected while waiting for resource
BR0976W Database message alert - level: WARNING, line: 108904, time: 2007-08-29 19.57.51, message:
ORA-000060: Deadlock detected. More info in file d:\oracle\prd\saptrace\usertrace\prd_ora_5992.trc.
BR0976W Database message alert - level: ERROR, line: 108908, time: 2007-08-29 19.57.51, message:
ORA-00600: internal error code, arguments: [kdtdelrow-2], [61], [61], [], [], [], [], []
BR0976W Database message alert - level: WARNING, line: 108909, time: 2007-08-29 19.57.51, message:
ORA-00060: deadlock detected while waiting for resource
BR0976W Database message alert - level: WARNING, line: 109228, time: 2007-08-30 10.10.44, message:
ORA-000060: Deadlock detected. More info in file d:\oracle\prd\saptrace\usertrace\prd_ora_4212.trc.
BR0976W Database message alert - level: ERROR, line: 109232, time: 2007-08-30 10.10.44, message:
ORA-00600: internal error code, arguments: [kdtdelrow-2], [65], [65], [], [], [], [], []
tahnks in advanced
with reagrds
venkat

go for patchset 9.2.0.8 and the latest minipatch (currently 9.2.0.8.10).
deadlocks are normaly application specific and not database related. the ORA-000060 only indicates that the Oracle database prevents a deadlock (two or more transactions locking each other)
Peter

Check DB finished with warning

Dear all,
Check DB finished with warning from DB13,
kindly check the detail log .
BR0969I Checking database administration...
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342337) 34959360 KB (> 28188060 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342338) 32747520 KB (> 26471824 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342339) 33157120 KB (> 17786284 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342340) 34304000 KB (> 24094204 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3700, value: (max_extn of 4 files on disk 3342339) 24125440 KB (> 17786284 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3700, value: (max_extn of 5 files on disk 3342340) 29286400 KB (> 24094204 KB)
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPSR3.ZBIMIS
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCLOG
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCLOG1
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCMAP
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCLOG~0
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCLOG1~0
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCMAP~0
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.29
BR0972I Checking database operations...
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.29
BR0974I Checking database messages in /oracle/IRP/saptrace/background/alert_IRP.log ...
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.31
BR0977I Checking database profile...
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file)
BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096)
BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE (<> TRUE)
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.31
BR0980I Number of changed database profile parameters: 0
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.32
Kindly suggest
Regards

HI
Go to DB20 , Enter the table name ( which are coming in warning) , Press "Refresh" button . You will see
"Old number" and "New Number" are different for those table. Simply click on "Create Statistics" button.
Once you create stats for all the tables shown in warning, run your DB Check job once again.
You have lots of other warning...do some google...you will get most of the information for those warning. Some good links are below
http://download.oracle.com/docs/cd/B12037_01/server.101/b10755/initparams143.htm
http://skywheel.sarang.net/docs/Oracle/10g/server.101/b10755/initparams168.htm
http://youngcow.net/doc/oracle10g/server.102/b14237/initparams209.htm
Regards
Anindya
Edited by: Anindya Bose on Mar 12, 2010 12:35 PM

DB check finished with warnigs CRITICAL_TABLESPACE, object: PSAPSR3USR

Hello All,
db check finished with warnigs
BR0280I BRCONNECT time stamp: 2008-12-24 10.31.02
BR0969I Checking database administration...
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3USR, value: (max_extn of 2 files on disk 681
5746) 35840000 KB (> 28193888 KB)
database >>>(oracle 10g)
SQL> select FILE_NAME,BYTES/1024/1024,AUTOEXTENSIBLE,MAXBYTES/1024/1024,INCREMENT_BY from dba_data_files where TABLESPACE_NAME='PSAPSR3USR';
FILE_NAME
BYTES/1024/1024 AUT MAXBYTES/1024/1024 INCREMENT_BY
/oracle/ADE/sapdata1/sr3usr_1/sr3usr.data1
2500 YES 20000 2560
/oracle/ADE/sapdata1/sr3usr_2/sr3usr.data2
2500 YES 20000 2560
Please help me to resolve the issue.
Regards
Mohsin

Hi,
I think u need to check ur size on the disk where the tablespace PSAPSR3USR datafiles are getting stored.
It says that it needs 35840000 KB of disk space but the available disk space available is
only 28193888 KB.
Regards,
Amar.
Edited by: amarnath kurelli on Dec 25, 2008 2:31 PM

Deployment finished with warning when I deploy projects!

Dear All,
I got the error message when I deploy 2 related projects to J2EE, what is the reason? Thanks.
2011-5-27 15:37:57 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[003]Deployment finished with warning
Settings
SDM host : IBM205928
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ADMINI1/LOCALS1/Temp/temp3258717415907093402cateomp~asc.ear
Result
=> deployment not executed : file:/C:/DOCUME1/ADMINI1/LOCALS1/Temp/temp3258717415907093402cateomp~asc.ear
Unresolved dependencies found for the following SDAs:
1.: development component 'eomp/asc'/'cat'/'CNP_CRMASCTR_D'/'20110527151357'/'0'
dependency:
name: 'eomp/survyapp'
vendor: 'cat'
There is no component either in SDM repository or in Deployment batch that resolves the dependency.
Deployment will be aborted.
Deployment exception : Got problems during deployment

Hello
I tried to deploy all components that I can find, but it is still wrong.
Do you know how to check these components which need be deployed? Thanks ...

R3trans check finished with return code:12

Hello!
Can some one help me with the error:
R3trans check finished with return code:12
ERROR: Startup of database failed
/usr/sap/<SID>/SYS/exe/runn/startdb terminating with error 12.
I can start as ora<sid> the oracle, but have problem to start sap.
Thank you very much!
regards
Thom

Dear Thom,
Check ENV variables.Maybe there could be some prob with that .
Please paste the trans.log output of the R3trans -x.
That could help us in suggesting some thing .
Regards
Bharathwaj V

DB check finished with warnings CRITICAL_TABLESPACE, object: PSAPSR3USR,

Hello All,
database >> oracle 10g
Autoextend is on for 2 datafile
cd sapcheck >> latest check file finished with warnings
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3USR, value: (max_extn of 2 files on disk 6815746) 36569088 KB (> 32505952 KB)
SQL> select FILE_NAME,BYTES/1024/1024,AUTOEXTENSIBLE,MAXBYTES/1024/1024,INCREMENT_BY from dba_data_files where TABLESPACE_NAME='PSAPSR3USR';
FILE_NAME
BYTES/1024/1024 AUT MAXBYTES/1024/1024 INCREMENT_BY
/oracle/ADE/sapdata1/sr3usr_1/sr3usr.data1
2500 YES 20000 2560
/oracle/ADE/sapdata1/sr3usr_2/sr3usr.data2
2500 YES 20000 2560
kindly help me to resolve issue
Regards
Mohsin
Edited by: mohsin m on Dec 24, 2008 10:59 PM

Hi,
Can you please check the avaliablity of free space on disk.
"CRITICAL_TABLESPACE Warning Description: Examines the data of a tablespace to see whether the file system can be brought to overflow, due to the existing parameter setting (NEXT and MAXSIZE), during the automatic file extension."
--Kishore

DB check finished with warnings

Hello All,
In SAPCHECK latesh .chk file finished with warnings
BR0280I BRCONNECT time stamp: 2009-03-26 10.30.46
BR0815I Number of indexes in schema of owner SAPAUTH: 2
BR0815I Number of indexes in schema of owner SAPR3: 49400
BR0815I Number of indexes in schema of owner SYS: 299
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 228/24
BR0838W Table YSEX_UPL2SAP_1001 not found for segment SAPR3.YSEX_UPL2SAP_1001 - ignoring segment
Kindly help me to resolve the issue.
Regards
Mohsin Mulani

Mohsin,
Please check out following link.
[Re: ORA-03113: end-of-file on communication channel]
Please also check following notes.
Note 1137346 - Oracle Database 10g: Patches for Release 10.2.0.4
Note 871096 - Oracle Database 10g: Patch sets/patches for 10.2.0.
Hope this helps.
Manoj

Problem in sap script check printing with EPSON FX890 printer

Hi
I am trying to print a check through F-58 using a script.
We have a new EPSON FX890 dot matrix printer, But when I fire a check the the formatting of the check is not proper. The alignment is never the same as given in the SAP script. this could a problem with the printer set up and configuration in SAP. Could anybody please give me some inputs on what needs to be done. its Urgent. Can anybody give me what needs to be done and also guide me with Print control commands in SAP scripts
Thanks,

Hi,
Here is some steps you should follow for scripts printout.
1. Validate the drivers used in SAP (Tcode SPAD)
2. Are you printing through a print server or directly to the printer
3. If it is througha print server like windows, you should validate to have the right driver installed for that printer.
4. Validate on the printer the default setting. If the script doesn't sent the proper font or setup, it will print using the last setup sent to the printer.
So if somebody used work and print a specific document with different setting, some time the setting stays for the SAP report.
To validate the setup of the printer, just turn off and on the printer before sending the SAP form. That should help to see if the setup has been changed by another program.
I hope those simple steps will help to solve your problem.
Reward if helpfull...
Cheers,
Rakesh.

DMS Storage in SAP Database with Kpro.

Hello SAP Gurus,
we are using the ECC 6.0 client and still have not configured any content servers for storing the originals,
but i could make use of Kpro Tick in Document type and attach n no of file to DIR,
also i have tried using KPRO tick and also making the file Size as 00000,
but its working and allowing me to store originals in DMS_C1_S1 content repository.
But when i dont give Kpro tick in document type, then original is not checked in using KPRO, (but again it is also storing original in SAP Database), then it is at this point it is required to give the file size or else it is giving the error, what is the reason for this strange behavior,
as in both the case the document is getting stored in SAP database only.
as content repository DMS_C1_S1 is again using SAP Data Base itself. (Verify from OACT transaction.)
Please clarify,
Points awaiting.
regards
Priya

Dear friends thanks for your reply,
as i have detailed in my quiry,
i could see if we use Kpro we can attach more than 2 originals in a DIR, and also get the advantages of Kpro,
and if i dont give Kpro tick only 2 originals can be attached in the original.
but in both the cases the original is being stored in the SAP Database only.(in my case as content server is not yet installed)
i want to know as the original files if stored in SAP DMS either with Kpro or with out Kpro, can this original files stored be copied in to external storage device say CDs and opened with out SAP logon. (like opening the files in normal windows system)
thanks and regards,
Priya
Edited by: Priya S on Feb 19, 2009 11:46 AM

Space problems with the SAP Database MS SQL 2000

Hi,
Actually, I have a size problem with the database, I have MS SQL Server 2000 with Service Pack4 on a Windows 2003 Server environment that is my DataBase Server of my ERP ECC 6.0. On the other hand I have a storage where I have 229 Gb of free space used only for the database files of the SAP data and the SAP log file.
But when I check the DB space allocation on trx. DB02 I saw this:
3 Database files and 1 transaction log:
The 3 database files are: PRDDATA1 (size 15,313 MB used 15016 MB) , PRDDATA2 (size 14106 MB used 13984 MB), PRDDATA3 (size 14472 MB used 14352 MB) and the log file is PRDLOG1 ( size 1000 MB) all of them with no limit option and growth by 10%.
So I went to the SQL Enterprise Manager and I saw that my Database PRD properties and I got this information:
My database size is 44892.48 Mb size with only 1330.36 Mb of free space and that is alarming.
So the question here is how ,if I have a storage where the sap data is storing with 229 Gb of free space, can I make the database files grow up in order to use all the available space of my storage.
Can you help me please because it is critical being my productive system?
Best Regards
Erik Espinosa

I resolved this issue myself. Thanks for all your help.
Best Regards,
Erik Espinosa

Sap database tables with adobe forms

Hai all,
I am new to adobe forms...Can anyone explain me how to link sap database with adobe forms....
Any documents regarding tht will be helpful.....
Thanks in advance....

Hi,
Check these:
https://www.sdn.sap.com/irj/sdn/adobe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a8a0a37-0301-0010-f794-aecd1bb426e0
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/47a2be350c4ac8afe36b691203971f/frameset.htm
Regards,
Subramanian

CHECK WRITEABILITY OF BUFFERS finished with return code 12

Hi
When trying to release transports on our Dev system CD1 it takes foreverand a message appear on the bottom of the screen CHECK WRITEABILITY OF
BUFFERS finished with return code 12. Below is a print screen of log file:
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order : "CD1K920992"
1 ETP102 system : "CD1"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.40" "701"
1 ETP198
4 ETP201 Check target systems buffer: "
ctuxdev\sapmnt\trans\buffer\QAS"
3 ETP203 Buffer "
ctuxdev\sapmnt\trans\buffer\QAS" is writeable
2EETP000 The request's target QAS.400 is client dependant but the target
system cannot handle that.
Not sure what the issue is or what has changed as our transport system
has always been working fine.
Regards
Roger

Hi Roger,
I suppose that you are using "Extended Transport Control" in your TMS environmant.
The following link is about the details of "Extended Transport Control":
http://help.sap.com/erp2005_ehp_04/helpdata/EN/1b/9dc2d6e59911d184810000e8a57770/content.htm
To activate "Extended Transport Control", you shoul set tp parameter CTC=1, the default value for it is 0(inactive). At the same time, you should set the value for parameter tp_version to at least 264. For details, please refer to the following link:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/3d/ad5bcf4ebc11d182bf0000e829fbfe/content.htm
->
ctc
Default: 0
Value range: Boolean
ctc stands for Client Transport Control and represents a method of configuration for transport routes. This parameter lets you set specific transport routes using various clients in your system landscape. This method requires an extension of the import buffer. This new format is not understood by old tp programs. Therefore, this new function is switched off by default and the user must explicitly turn it on.
At the same time, the profile generator of the Transport Management System is also delivered. Along with the transport route configuration in the Transport Management System, the transport profile parameter ctc is automatically switched on from the TMS if it is required for your transport landscape.
The new format of the import buffer, activated by ctc=1, requires at least a tp from Release 4.5A. Older tp versions destroy this new import buffer.
When parameter ctc is set, tp requires that you set the value for parameter tp_version to at least 264. This prevents transport control programs with lower version numbers from working with this import buffer. As a result, you can only set the new parameter ctc if all the transport control programs that work with a specific SAP System have at least version 264.
Please check whether ctc=1 and tp_version=264(or higher) are set in transport profile TP_DOMAIN_<SID>.PFL for all systems.
If not, please define them via T-cd:STMS->overview->systems->transport tool.
With Best Regards
Julia Song

How to access SAP database tables with Java (Jco)

Hi!
I need to develop a Java Client for SAP with access to the SAP database. Is there a way to do this directly in Java (the db access) or do I have to use some ABAP logic in between to get the information to the java client? If so, are there any existing ABAP functions to read AND write db tables? Or do I have to create my own wrappers for each table I need to read and write?
Thanks,
Konrad

hi,
i am sending code .i think it will help u
     try {
               // Add a connection pool to the specified system
               //    The pool will be saved in the pool list to be used
               //    from other threads by JCO.getClient(SID).
               //    The pool must be explicitely removed by JCO.removeClientPool(SID)
                    this.objClient = JCO.createClient(strClient, // SAP client
                    strUserID, // userid
                    strPwd, // password
                    strLang, // language
                    strHost, // host name
                    strSysNr);
               this.objClient.connect();
               // Create a new repository
               //    The repository caches the function and structure definitions
               //    to be used for all calls to the system SID. The creation of
               //    redundant instances cause performance and memory waste.
               this.objIRepository =
                    JCO.createRepository("MYRepository", this.objClient);
          } catch (JCO.Exception ex) {
               System.out.println("Caught an exception: \n" + ex);
          JCO.Function objFunction =
               this
                    .objIRepository
                    .getFunctionTemplate("BAPI_MATERIAL_AVAILABILITY")
                    .getFunction();
          objFunction.getImportParameterList().setValue(strPlant, "PLANT");
          objFunction.getImportParameterList().setValue(strMaterial, "MATERIAL");
          objFunction.getImportParameterList().setValue(strQuantity, "UNIT");
          this.objClient.execute(objFunction);
          JCO.Structure ret =
               objFunction.getExportParameterList().getStructure("RETURN");
          String strRetMsg = ret.getString("MESSAGE");
          if (strRetMsg.equals("Unit is not created in language")) {
               arrResult.add("error");
               return arrResult;
          } else {
               String strQty1 =
                    objFunction.getExportParameterList().getString("AV_QTY_PLT");
               if (strQty1.equals("0"))
                    result = "no";
               else
                    result = "yes";
               arrResult.add(result);
               return arrResult;

Check Box With Tick Mark on Sap Script

Hello All,
We need to add a check box with tick mark on Sap Script.Please can anyone let me know how can we add it.
Regards
Amruta

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

SAP database check finished with warning

Similar Messages

Maybe you are looking for