SAP ECC 6.0 -- Business Connector / Error:Input values do not contain IDOC
Hello,
We have a scenario R/3 4.6C ORDRSP to the SAP business connector which is running fine. When I send the first IDoc the routing roule is created automatically and it can be adapted.
Now we switched to the ECC 6.0 system but I get the following error message:
"Input values do not contain IDOC" and no routing roule is created either. The status of the IDoc is 03.
Do you have any idea what the problem could be? Could it have anything to do with ECC 6.0?
Thank you for your support.
Hi,
I hope you must have added new SAP ECC system under SAP tab on SAP BC page.
To check exact error information:
FIrst open SAP BC page in browser (http://localhoet:port)
Go to transaction tab, and there under TID box, enter transaction id corresponding to SM58. And check what it says.
About routing rule:
BC automatically creates routing rule, if not you can edit and direct them to correct process flow, or you can create new routing rule, as BC need routing rule to move IDOC ahead.
Please let us know further about error information, so that we can help you further.
Divyesh
Similar Messages
-
BDC error-- INPUT VALUE IS LONGER THAN SCREEN FIELD
Hi all,
I wrote BDC for VA01. Here I need to pass condition amount to the BDC SCreen ( field name : KOMV-KBETR). When i run the BDC, it is throwing error -- ' INPUT VALUE IS LONGER THAN SCREEN FIELD '.
Then I passed the amount value manually to the BDC screen field. Still it is not working.
DATA : v_kbetr1 TYPE komv-kbetr.
MOVE itab-kbetr1 TO v_kbetr1.
PERFORM bdc_field USING 'KOMV-KBETR(08)'
v_kbetr1.
Please look into this issue.
Thanks,
Murali Krishna.Tv_kbetr1 type komv-kbetr
have you seen the code automatically generated after recording in SHDB. You may notice that all the variable will be declared of character type. That is to avoid these kind of problems.
Change the declaration as character type of length 14. it should work. -
TO Error: Source HU ******* is not contained in Source storage unit *******
Dear All,
Our warehouse Handling Unit managed. I have created a delivery which is partially picked.
After that when I am trying to create Transfer Order, I am getting an error "*Source HU ******* is not contained in Source storage unit ******"
I am getting a pop up window in the name of "Enter withdrawal of Handling Units", and it is asking me to enter the Quantity to be repacked.
I am getting this error only when I am doing Partial picking.
How to get rid of this error. Kindly suggest.
Regards,
Mullairaja
Edited by: MullaiRaja on May 26, 2011 10:47 AMHello
This can be the whole pallet have to be withdrawn from the source (flag LTAP-HOMVE is set on, 'X'), but HU picking control does not propose the source HU as the destination HU (flag LTAP-HUPIK is clear, ' '). Kindly check.
If that is not the case then, for your reference refer following SAP notes:
- 662020: Processing of TO with different storage types
- 514604: Storage unit is not deleted when posting goods issue
- 721901: Errors LF-064, L3-848 while picking w/o pick-HU
- 552073: Message L3222 when creating transfer order with LT09
- 505542: Incomplete TO confirmation in Transaction LT0H & LT0I
Thanks & Regards
JP -
Mysite Error - The site does not contain a default keywords termstore
I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx -
I'm publishing an .fla in AIR for IOS.
I'm in CC 2014 so first I need to know which AIR should I publish in?
newest is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
publishes with no error.
I see the following files included .swf and app.xml
I convert the .ipa to a zip file
Upload that thru the Application Loader I get the following error
The package does not contain an Info.plist.
Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
I converted the .ipa to a .zip and the intoplist file is NOT THERE how do I generate this?
Any help here?Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
I used my previous p12, app ID and distribution certificates all generated properly.
The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
I changed it to the right app ID and the very next time and after 10 attempts I got the same error Digital Certificate is not valid
SO I then downloaded AIR 16.0
RE DID ALL MY CERTIFICATES AND P12'S
went to publish and I STILL GET THE SAME MESSAGE Digital Certificate is not valid -
More "TypeError: Error #1006: value is not a function." trouble
var pntClk:int = -1;
for(var t:int=0;t<tab1PointsArray.length;t++) {
tab1PointsArray[t].addEventListener(MouseEvent.CLICK, tab1PointClicked); <Problem code i think. Error points to line 117
trace("Event listener added to " + tab1PointsArray[t].name);
function tab1PointClicked (event:MouseEvent):void {
for(var T:int=0;T< tab1PointsArray.length;T++) {
if (event.currentTarget == tab1PointsArray[T]) {
pntClk = T;
openInfoTab();
trace("Point Clicked: " + tab1PointsArray[T].name);
I wrote some previous code that worked and i copy pasted over to this project and it doesn't work.
The weird part to me is that it still runs the first set of trace statements (there are 8 objects in that array). But, it won't run the second set...
for(var l:int=0;l<Tab2PointsArray.length;l++) {
Tab2PointsArray[l].addEventListener(MouseEvent.CLICK, tab2PointClicked);
trace("Event listener added to " + Tab2PointsArray[l].name);
function tab2PointClicked (event:MouseEvent):void {
for(var t:int=0;t< Tab2PointsArray.length;t++) {
if (event.currentTarget == Tab2PointsArray[t]) {
pntClk = t;
openInfoTab();
trace("Point Clicked: " + Tab2PointsArray[t].name);
if you need more code or info to help me figure this out let me know
I don't know actionscript that well so bare withThe output window:
Event listener added to PointHitch
Event listener added to PointPTO
Event listener added to PointSafety
Event listener added to PointGearBox
Event listener added to PointBlade
Event listener added to PointTeeth
Event listener added to PointGrapple
TypeError: Error #1006: value is not a function.
at TractorSawFlash_fla::MainTimeline/frame1()[TractorSawFlash_fla.MainTimeline::frame1:115]
I think the first set of listeners is added then the error happens and the second set of listeners doesn't get added.
Here is more code.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.events.MouseEvent;
var infoTabIsOpen:Boolean = false;
//TAB CODE
var TractorSawTabToggle:Boolean = false;
var TabButtonArray:Array = new Array(TabTR3200.TR3200BTN, TabTR3200LT.TR3200BTNLT);
for (var i:int=0; i<TabButtonArray.length; i++)
TabButtonArray[i].id = i;
TabButtonArray[i].addEventListener(MouseEvent.CLICK, onClick);
TabTR3200.TR3200BTN.mouseEnabled = false;
TabTR3200.TR3200BTN.buttonMode = false;
function onClick(event:MouseEvent):void{
if (TractorSawTabToggle == true) {
TractorSawTabToggle = false;
swapChildren(this.TabTR3200,this.TabTR3200LT);
TabTR3200LT.TR3200BTNLT.mouseEnabled = true;
TabTR3200LT.TR3200BTNLT.buttonMode = true;
TabTR3200.TR3200BTN.mouseEnabled = false;
TabTR3200.TR3200BTN.buttonMode = false;
else {
TractorSawTabToggle = true;
swapChildren(this.TabTR3200,this.TabTR3200LT);
TabTR3200LT.TR3200BTNLT.mouseEnabled = false;
TabTR3200LT.TR3200BTNLT.buttonMode = false;
TabTR3200.TR3200BTN.mouseEnabled = true;
TabTR3200.TR3200BTN.buttonMode = true;
//END TAB CODE
//MovieTab
MovieButton.addEventListener(MouseEvent.CLICK, clickedMainMovie);
MovieTab.Exit_BTN.addEventListener(MouseEvent.MOUSE_DOWN, outMainMovieTrigger);
function clickedMainMovie(event:MouseEvent):void {
var TabMainMovieDown:Tween = new Tween(MovieTab, "y", Strong.easeOut, -600, 0, 1, true);
var TabMainMovieAlphaIn:Tween = new Tween(MovieTab, "alpha", Strong.easeOut, 0, 1, 1, true);
if (infoTabIsOpen == true) {
closeInfoTab();
function outMainMovieTrigger(event:MouseEvent):void {
outMainMovie();
function outMainMovie():void {
trace("Three Sixty MOUSE_OUT");
var TabMainMovieUp:Tween = new Tween(MovieTab, "y", Strong.easeOut, 0, -600, 1, true);
var TabMainMovieAlphaOut:Tween = new Tween(MovieTab, "alpha", Strong.easeOut, 1, 0, 1, true);
MovieTab.FLVPlayback.stop();
//END MovieTab
//INFO TAB ARRAYS AND FUNCTIONS
var placeHolder:String = "null";
var tab1PointsArray:Array = new Array(this.TabTR3200.PointHitch, //0
this.TabTR3200.PointPTO, //1
this.TabTR3200.PointSafety, //2
this.TabTR3200.PointGearBox, //3
this.TabTR3200.PointBlade, //4
this.TabTR3200.PointTeeth, //5
this.TabTR3200.PointGrapple, //6
placeHolder); //7
var Tab2PointsArray:Array = new Array(this.TabTR3200LT.PointHitch, //0
this.TabTR3200LT.PointPTO, //1
this.TabTR3200LT.PointSafety, //2
this.TabTR3200LT.PointGearBox, //3
this.TabTR3200LT.PointBlade, //4
this.TabTR3200LT.PointTeeth, //5
placeHolder, //6
this.TabTR3200LT.PointPushingBar);//7
var pictureArray:Array = new Array(placeHolder,
placeHolder,
placeHolder,
placeHolder,
placeHolder,
placeHolder,
placeHolder,
placeHolder);
var textArray:Array = new Array(InfoTab.txtHitch, //0
InfoTab.txtPTO, //1
InfoTab.txtSafety, //2
InfoTab.txtGearbox, //3
InfoTab.txtBlade, //4
InfoTab.txtTeeth, //5
InfoTab.txtGrapple, //6
InfoTab.txtPushingBar); //7
//Point Clicked Code
var pntClk:int = -1;
for(var t:int=0;t<tab1PointsArray.length;t++) {
tab1PointsArray[t].addEventListener(MouseEvent.CLICK, tab1PointClicked); <LINE 115 were it says the error is happening
trace("Event listener added to " + tab1PointsArray[t].name);
function tab1PointClicked (event:MouseEvent):void {
for(var T:int=0;T< tab1PointsArray.length;T++) {
if (event.currentTarget == tab1PointsArray[T]) {
pntClk = T;
openInfoTab();
trace("Point Clicked: " + tab1PointsArray[T].name);
for(var l:int=0;l<Tab2PointsArray.length;l++) {
Tab2PointsArray[l].addEventListener(MouseEvent.CLICK, tab2PointClicked);
trace("Event listener added to " + Tab2PointsArray[l].name);
function tab2PointClicked (event:MouseEvent):void {
for(var t:int=0;t< Tab2PointsArray.length;t++) {
if (event.currentTarget == Tab2PointsArray[t]) {
pntClk = t;
openInfoTab();
trace("Point Clicked: " + Tab2PointsArray[t].name);
//Info Tab
var ImageLoader:Loader;
ImageLoader = new Loader();
// make text invisible
function makeTextInvisible():void {
for (var txt:int=0; txt<textArray.length; txt++) {
textArray[txt].visible = false;
InfoTab.Exit_BTN.buttonMode = true;
InfoTab.Exit_BTN.addEventListener(MouseEvent.CLICK, closeInfoTrigger);
function closeInfoTrigger(e:MouseEvent):void {
trace("close feature triggered");
closeInfoTab();
//OPEN INFO TAB
function openInfoTab():void {
//EnableExitButton
var EnableExitButton:Timer = new Timer(333, 1);
InfoTab.mouseEnabled = true;
InfoTab.mouseChildren = true;
var tabIn:Tween = new Tween(InfoTab, "y", Regular.easeOut, 600, 60, 10, false);
var tabAlphaIn:Tween = new Tween(InfoTab, "alpha", Regular.easeOut, 0, 1, 10, false);
//pictureSetter
if (pictureArray[pntClk] != "null") {
ImageLoader.load(new URLRequest(pictureArray[pntClk]));
this.InfoTab.ImageHolder_MC.addChild(ImageLoader);
textArray[pntClk].visible = true;
infoTabIsOpen = true;
//end open info tab
//CLOSE INFO TAB
function closeInfoTab():void{
//deactivating setters
InfoTab.mouseEnabled = false;
InfoTab.mouseChildren = false;
trace("feature tab deactivated");
//unload picture
if (pictureArray[pntClk] != "null") {
ImageLoader.unload();
this.InfoTab.ImageHolder_MC.removeChild(ImageLoader);
ImageLoader = null;
//tab action variables
var tabAlphaOut:Tween = new Tween(InfoTab, "alpha", Regular.easeIn, 1, 0, 8, false);
var tabOut:Tween = new Tween(InfoTab, "y", Regular.easeIn, 60, 600, 8, false);
infoTabIsOpen = false;
//exit timer
var exitTimer:Timer = new Timer(200, 1);
exitTimer.addEventListener(TimerEvent.TIMER, exitHandler);
exitTimer.start();
function exitHandler(event:TimerEvent):void
trace("exit handler fired");
makeTextInvisible();
//end exit timer
pntClk = -1;
//end closeFeatureTab -
Error #1006: value is not a function
I'm trying to port a big library to Alchemy. I've run into something that looks like an Alchemy bug. I have a class with a static member. There's a static function that uses it. Something like this:
In foo.h:
class Foo
static Bar m_pBar;
static void doSomething (int a);
In foo.cpp:
Bar Foo::m_pBar;
void Foo::doSomething (int a)
m_pBar.doSomething(a);
When I do Foo::doSomething(a), I get TypeError: Error #1006: value is not a function.
On the other hand, if I use a local variable of the same type in the static function (just to test), it works :
void Foo::doSomething (int a)
// Test
Bar pBarTest;
pBarTest.doSomething(a);
So my guess is that the static variable is not being initialized. This works fine when compiled with g++ in Linux and Mac and with Visual C++ 2008 in Windows so it looks like Alchemy is doing something wrong.
Has anyone encountered this same issue?Ignore, it was something in the called class, oops
-
Guys,
Do you know what this error in SAP Business Connector means:
Missing or Invalid Parameter:Sender
Any help would be appreciated.
Thanks,
SathyaNow this is a broad question_
I guess you mean: IDOC handling
This means usually, that the Sender ID is not set up properly in the BC (Send/Reveice Rules). In case you don't have a 1:1 mapping, use the '*' for ALL.
Can you please give more specific information:
where is the Error (Log, Popup-message etc),
what is the context (BAPI CALL, IDOC etc)
-hs -
GB e-filing - Business Connector Error
Hi,
SAP version: ECC5
Business Connector version: 4.7 SSL (along with Hotfix 5)
Our HR functional consultant is trying to execute the program RPCEOYG0 to generate XML data with Zip option to send forms to Inland Revenue. As long as the zip option is not chosen, the program works fine, respective forms are generated in XML and sent to Business Connector. When zip option is chosen, the program gives an error:
<b>
[B2BSERV.0026.9201] Unknown service: GBOUTGOING:HR
Message no. 3G001
</b>
According to the configuration guide, there is a service called HR_GB_EF_GZIP in the e-filing package that needs to be set up, in addition to the 6 other services. Thats all done and dusted. But it seems there is something wrong with the service itself thats causing the problem.
Has anyone faced this issue before?
Thanks and regards,
ShehryarHi Shehryar,
We are also facing the same error and issue.Can you please let us know where the problem lies.
When we give zip or unzip in both the cases we are getting the below error.
<b>RFC Error:[B2BSERV:0026.9201 UNKNOWN SERVICE GBOUTGOING HR</b>
SAP VERSION : 4.7
BC Version: 4.6
Waiting for your inputs .
Regards
Rani A
Message was edited by:
Rani A -
List view error "Filter Value is not in a supported date format"
I've column "Name = Order Status","Type = Calculated" & Data Type = "Date and Time". I've given this Condition in the formula:- =IF(NOT([PO Date]=0),"ORDERED","NOT ORDERED"). I'm trying to create view
for this column but its getting error while create the view "Filter Value is not in a supported date format".
Same error I'm getting for column "Name = Status","Type = Calculated" & Data Type = "Number". I've given this Condition in the formula:- =IF([PO Date]="","",IF(NOT([Balance Qty]=0),"OPEN","CLOSED"))Can you check data type returned for your calculated column 'Balance Qty'?
Try to set it as Number. It may help you.
Thanks. -
Error remote table does not contain a primary key
I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answerI make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer -
Error: The folder does not contain a valid Flex Builder Project.
HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy -
Error - The site does not contain a default keywords termstore
Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu -
MIGO error 'Purchase Order does not contain a confirmation control key'
Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarityHi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro -
Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code
Maybe you are looking for
-
I do a lot of machine embroidery. In moving from a PC to Mac, I've learned that none of my current embroidery software is compaitible with Apple OS. I'm happy to maintain those programs on a Windows laptop, but would really like to be able to view my
-
XML Gateway: Error while posting to a OTA URL
Hi I am using the code in XML Gateway user guide for OTA Post over HTTPS. Am getting an IOException that i am unable to tunnel through the proxy. The user guide code can be seen here : http://docs.oracle.com/cd/E18727_01/doc.121/e12954/T319774T319783
-
WSDL error during generation of ABAP proxy for web service
Hi friends, I am getting error during the generation of ABAP proxy object for web service developed in .NET . Error : Proxy generation terminated: WSDL error (<extension> not supported). How to make this WSDL file compatible for ABAP proxy. I have
-
Positive surprise: PSE 4.0 came along with a 200+ page User Guide
Today, when I got by regular mail my PSE 4.0 version, the box containing the Software contained also a User Guide of a little more than 200 pages. This is in contrast to the PSE 3.0 box that I got one year earlier: it contained only a 70-page "Gettin
-
How can I Upgrade to os 10.7.5
Where do I find 10.7.5 on disk. I need to send it to sister to instal on my mothers late 2006 iMac.