SAP gateway and disp+work died after a view seconds

Dear Forum,
2 additional instances have just installed for a GTS on NW04S. Located on other servers than the CI.
When I started, everything was running, then died. The shortest process was the gateway, only alive for 15 seconds then died...., followed by all disp+work.
In the dev_rd:
================
trc file: "dev_rd", trc level: 1, release: "700"
Tue Jul 24 06:25:26 2007
***LOG S00=> GwInitReader, gateway started ( 6140) [gwxxrd.c     1693]
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    94
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        6140
gateway runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Bind service sapgw00 (socket) to port 3300
Bind service sapgw00s (socket/snc) to port 4800
GwPrintMyHostAddr: my host addresses are :
  1 : [192.168.188.157] GDCS032P.erp.gdc.com (HOSTNAME)
  2 : [127.0.0.1] GDCS032P.erp.gdc.com (LOCALHOST)
  3 : [10.200.3.157] gdc032pb (NILIST)
  4 : [192.168.187.157] GDCS032P.erp.gdc.com (NILIST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Tue Jul 24 06:25:27 2007
DpShMCreate: sizeof(wp_adm)          63296     (1472)
DpShMCreate: sizeof(tm_adm)          55595792     (27784)
DpShMCreate: sizeof(wp_ca_adm)          80000     (80)
DpShMCreate: sizeof(appc_ca_adm)     160000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm)          2208080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1848)
DpShMCreate: sizeof(wall_adm)          (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D6D0050, size: 58877856)
DpShMCreate: allocated sys_adm at 000000000D6D0050
DpShMCreate: allocated wp_adm at 000000000D6D1F40
DpShMCreate: allocated tm_adm_list at 000000000D6E1680
DpShMCreate: allocated tm_adm at 000000000D6E16E0
DpShMCreate: allocated appc_ca_adm at 0000000010BFA270
DpShMCreate: allocated comm_adm at 0000000010C21370
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000010E3C4C0
DpShMCreate: allocated gw_adm at 0000000010E3C540
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000010E3C570
MtxInit: -2 0 0
Tue Jul 24 06:25:33 2007
GwDpInit: attached to gw_adm at 0000000010E3C540
Tue Jul 24 06:25:43 2007
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     14147]
================
I can see in the dev trace of dispatcher and others, everything was initialized properly, then suddenly got a signal for shuting down.
For example in dev_disp:
================
Tue Jul 24 06:25:36 2007
MBUF state ACTIVE
ERROR => DpRqNoWpHandle: SHUTDOWN request from wp_id 18 received [dpxxdisp.c   5092]
DpHalt: shutdown server >gdcs032p_GP1_00                         < (normal)
DpModState: change server state from STARTING to SHUTDOWN
Stop work processes
================
Then all disp+work were dying ...
When I looked at the syslog in MMC, the only suspicious message is a warning: "SAP-Basis System: There is an Error in the Enqueue Configuration".
FYI, it is a clustered system. But, I have another clustered system on NW04 works properly, as well its additional instances.
Please help.
Regards,
Agoes

Found the problem. There was an enq defined in the instances. So, I remarked it in the profile parameter, since there is only an enq allowed in the system.
Regards,
Agoes

Similar Messages

  • Failed to start SAP Gateway, J2EE (disp+work.exe) goes sleep

    Hello!
    I have problem to start the J2EE stack of central instance (sysnumber: 02) in MSCS cluster on Windows 2003.
    The error seems to be connected with start of SAP Gateway.
    The following telnet commando is failed
    >telnet server sapgw02
    The appropriate entry sapgw02 3302
    in C:\Windows\system32\drivers\etc\services exists…
    Is something different within MSCS installation?
    Thank you very much!

    Hi Tobias,
    thank you very much for your response!
    The context of dev_rd is:
    Mon Feb 25 12:25:13 2008
    ***LOG S00=> GwInitReader, gateway started ( 3616) http://gwxxrd.c 1694
    systemid 562 (PC with Windows NT)
    relno 7000
    patchlevel 0
    patchno 110
    intno 20050900
    make: multithreaded, Unicode, 64 bit, optimized
    pid 3616
    gateway runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Bind service sapgw02 (socket) to port 3302
    GwPrintMyHostAddr: my host addresses are :
    1 : http://192.168.150.50 dzea9050.frtg.int (HOSTNAME)
    2 : http://127.0.0.1 dzea9050.frtg.int (LOCALHOST)
    3 : http://192.168.233.241 dzea9050.frtg.int (NILIST)
    4 : http://192.168.150.90 SSPCI.frtg.int (NILIST)
    5 : http://192.168.150.70 SSPCL.frtg.int (NILIST)
    6 : http://192.168.150.80 SSPDB.frtg.int (NILIST)
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm) 23680 (1480)
    DpShMCreate: sizeof(tm_adm) 5584592 (27784)
    DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm) 552080 (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (72)
    DpShMCreate: sizeof(vmc_adm) 0 (1864)
    DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F160050, size: 6279568)
    DpShMCreate: allocated sys_adm at 000000000F160050
    DpShMCreate: allocated wp_adm at 000000000F162150
    DpShMCreate: allocated tm_adm_list at 000000000F167DD0
    DpShMCreate: allocated tm_adm at 000000000F167E30
    DpShMCreate: allocated appc_ca_adm at 000000000F6C12C0
    DpShMCreate: allocated comm_adm at 000000000F6C3200
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F749E90
    DpShMCreate: allocated gw_adm at 000000000F749F10
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F749F40
    Mon Feb 25 12:25:14 2008
    MtxInit: -2 0 0
    Mon Feb 25 12:26:08 2008
    ***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14156
    Can you recommend something?

  • Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    hi I have the same problem... tried many different docking ports and cords also switched from outlet to outlet..... left on on outlet for 7 hours and still nothing.. what should i do?

  • HT201412 All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds

    All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds. Could this be a software glitch or a hardware problem, how can I find out and fix it

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

  • My Wi-Fi works, but after a while not anymore. Then I've to turn of on the Wi-Fi and turn it on after a few seconds. Can anybody help me with this annoying problem?

    Hello,
    My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
    Jelle van Blokland.

    Hi Jelle van Blokland,
    Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers!
    - Ari

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?

    Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.

  • TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • HT201364 I'm trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wo

    im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help

    you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If that does not work, take in for service
    Genius reservation http://www.apple.com/retail/geniusbar/

  • My iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    Hello warhogs17,
    After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Error CJS-20058 when applying J2EE Engine Patches SP19 and Disp+work.exe

    Hello All ,
    I am working on SAP XI SP9 (Stand alone J2ee Only). When I am trying to upgrade it SP 19 but it had failed at 17th ( Start J2ee Engine ) step . I am getting following error.
    ERROR 2007-04-15 06:52:41
    CJS-20058 Java EE Engine DVEBMGS00 of SAP system XI3 did not reach state "Starting Applications" after 1033 seconds: giving up.
    and after that Disp+Work process is completely failed to start in SAPMMC.
    Operating System :- Windows 2003
    Database :- Oracle 9.2.0.4
    Please Guide me on this.
    Thanks & Regards,
    Suresh.K

    Hi Sunil,
    im sending following files,
    disp+work.exe Developer Traces
    trc file: "dev_disp", trc level: 1, release: "640"
    Tue Apr 17 08:36:33 2007
    kernel runs with dp version 133000(ext=102000) (@(#) DPLIB-INT-VERSION-133000-UC)
    length of sys_adm_ext is 524 bytes
    sysno      00
    sid        XI3
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    155
    intno      20020600
    make:      multithreaded, Unicode
    pid        3584
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3584) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 155 successfully loaded
         shared lib "dw_xtc.dll" version 155 successfully loaded
         shared lib "dw_stl.dll" version 155 successfully loaded
         shared lib "dw_gui.dll" version 155 successfully loaded
         shared lib "dw_mdm.dll" version 155 successfully loaded
    Tue Apr 17 08:36:38 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3896]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpIPCInit2: start server >dlwsdb10_XI3_00                         <
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2969176     (14772)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (424)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06AA0040, size: 3381680)
    DpShMCreate: allocated sys_adm at 06AA0040
    DpShMCreate: allocated wp_adm at 06AA1B88
    DpShMCreate: allocated tm_adm_list at 06AA44A8
    DpShMCreate: allocated tm_adm at 06AA44D0
    DpShMCreate: allocated wp_ca_adm at 06D79328
    DpShMCreate: allocated appc_ca_adm at 06D7F0E8
    DpShMCreate: allocated comm_adm_list at 06D81028
    DpShMCreate: allocated comm_adm at 06D81040
    DpShMCreate: allocated vmc_adm_list at 06DC7D10
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 06DC7D38
    DpShMCreate: allocated wall_adm at 06DC7D40
    MBUF state OFF
    Tue Apr 17 08:36:39 2007
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 2207 blocks reserved for free list.
    ES initialized.
    Tue Apr 17 08:36:41 2007
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3800
      argv[0] = D:\usr\sap\XI3\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = D:\usr\sap\XI3\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=D:\usr\sap\XI3\SYS\profile\XI3_DVEBMGS00_dlwsdb10
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1303
      argv[5] = -DLISTEN_PORT=1304
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=XI3
      argv[8] = -DSAPMYNAME=dlwsdb10_XI3_00
      argv[9] = -DSAPPROFILE=D:\usr\sap\XI3\SYS\profile\XI3_DVEBMGS00_dlwsdb10
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    Tue Apr 17 08:36:42 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    Tue Apr 17 08:36:43 2007
    ***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c   1468]
    ***LOG Q0K=> DpMsAttach, mscon ( dlwsdb10) [dpxxdisp.c   10036]
    DpStartStopMsg: send start message (myname is >dlwsdb10_XI3_00                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Apr 17 08:36:44 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 155
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Tue Apr 17 08:37:24 2007
    ERROR => W0 (pid 2888) died [dpxxdisp.c   12562]
    ERROR => W1 (pid 2724) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 2324) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 2796) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 1172) died [dpxxdisp.c   12562]
    ERROR => W5 (pid 1272) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 1508) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 1704) died [dpxxdisp.c   12562]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-2888 (SIGUSR2)
    ERROR => DpWpKill(2888, SIGUSR2) failed [dpxxtool.c   2507]
    killing W1-2724 (SIGUSR2)
    ERROR => DpWpKill(2724, SIGUSR2) failed [dpxxtool.c   2507]
    killing W2-2324 (SIGUSR2)
    ERROR => DpWpKill(2324, SIGUSR2) failed [dpxxtool.c   2507]
    killing W3-2796 (SIGUSR2)
    ERROR => DpWpKill(2796, SIGUSR2) failed [dpxxtool.c   2507]
    killing W4-1172 (SIGUSR2)
    ERROR => DpWpKill(1172, SIGUSR2) failed [dpxxtool.c   2507]
    killing W5-1272 (SIGUSR2)
    ERROR => DpWpKill(1272, SIGUSR2) failed [dpxxtool.c   2507]
    killing W6-1508 (SIGUSR2)
    ERROR => DpWpKill(1508, SIGUSR2) failed [dpxxtool.c   2507]
    killing W7-1704 (SIGUSR2)
    ERROR => DpWpKill(1704, SIGUSR2) failed [dpxxtool.c   2507]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=1625
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Dev_w0
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M

    B Tue Apr 17 01:31:26 2007
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4484]
    M sysno      00
    M sid        XI3
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    155
    M intno      20020600
    M make:      multithreaded, Unicode
    M pid        524
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 524) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active

    M Tue Apr 17 01:31:27 2007
    M  DpShMCreate: sizeof(wp_adm)          10528     (1316)
    M  DpShMCreate: sizeof(tm_adm)          2969176     (14772)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpShMCreate: sizeof(comm_adm)          290000     (580)
    M  DpShMCreate: sizeof(vmc_adm)          0     (424)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 072A0040, size: 3381680)
    M  DpShMCreate: allocated sys_adm at 072A0040
    M  DpShMCreate: allocated wp_adm at 072A1B88
    M  DpShMCreate: allocated tm_adm_list at 072A44A8
    M  DpShMCreate: allocated tm_adm at 072A44D0
    M  DpShMCreate: allocated wp_ca_adm at 07579328
    M  DpShMCreate: allocated appc_ca_adm at 0757F0E8
    M  DpShMCreate: allocated comm_adm_list at 07581028
    M  DpShMCreate: allocated comm_adm at 07581040
    M  DpShMCreate: allocated vmc_adm_list at 075C7D10
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 075C7D38
    M  DpShMCreate: allocated wall_adm at 075C7D40
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4484]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c   1284]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9598]

    M  Info for wp 0

    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server dlwsdb10_XI3_00 on host dlwsdb10 (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Tue Apr 17 01:31:27 2007
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9783
    M  *  COUNTER     1
    M Tue Apr 17 01:31:28 2007
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  254]
    M  Entering ThSetStatError
    Dev_rd
    trc file: "dev_rd", trc level: 1, release: "640"
    Tue Apr 17 08:36:40 2007
    ***LOG S00=> GwInitReader, gateway started ( 384) [gwxxrd.c     1627]
    relno      6400
    patchlevel 0
    patchno    155
    intno      20020600
    pid        384
    unicode    active
    gateway runs with dp version 133000(ext=102000) (@(#) DPLIB-INT-VERSION-133000-UC)
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Tue Apr 17 08:36:41 2007
    Bind service sapgw00 (datagram) to port 3300
    Bind service sapgw00 (datagram) to port 3300
    Bind service sapgw00 (socket) to port 3300
    GwPrintMyHostAddr: my host addresses are :
      1 : [10.20.2.157] dlwsdb10 (HOSTNAME)
      2 : [127.0.0.1] dlwsdb10.i2.com (LOCALHOST)
    MtxInit: -2 0 0
    DpSysAdmExtCreate: ABAP is active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2969176     (14772)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (424)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06DE0040, size: 3381680)
    DpShMCreate: allocated sys_adm at 06DE0040
    DpShMCreate: allocated wp_adm at 06DE1B88
    DpShMCreate: allocated tm_adm_list at 06DE44A8
    DpShMCreate: allocated tm_adm at 06DE44D0
    DpShMCreate: allocated appc_ca_adm at 070BF0E8
    DpShMCreate: allocated comm_adm_list at 070C1028
    DpShMCreate: allocated comm_adm at 070C1040
    DpShMCreate: allocated vmc_adm_list at 07107D10
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 07107D38
    Tue Apr 17 08:37:40 2007
    ***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     13334]
    Dev_Jcmon
    trc file: "D:\usr\sap\XI3\DVEBMGS00\work\dev_jcmon", trc level: 1, release: "640"
    node name   : jcmon
    pid         : 4896
    system name : XI3
    system nr.  : 00
    started at  : Mon Apr 16 00:03:28 2007
    arguments   :
        arg[00] : D:\usr\sap/XI3/DVEBMGS00/j2ee/os_libs/jcmon.exe
        arg[01] : pf=D:\usr\sap\XI3\SYS\profile/XI3_DVEBMGS00_dlwsdb10
    [Thr 3668] Mon Apr 16 00:03:28 2007
    [Thr 3668] INFO: Unknown property [box.number=XI3DVEBMGS00dlwsdb10]
    [Thr 3668] INFO: Unknown property [ms.host=dlwsdb10]
    [Thr 3668] INFO: Unknown property [ms.port=3601]
    [Thr 3668] INFO: Unknown property [system.id=0]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\XI3\DVEBMGS00\j2ee\cluster\instance.properties;D:\usr\sap\XI3\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : dlwsdb10
    -> ms port    : 3601
    -> OS libs    : D:\usr\sap\XI3\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    [Thr 3668] Mon Apr 16 00:03:29 2007
    [Thr 3668] *** ERROR => Can't attach to administration shared memory (rc=3) [jcmonxx.c    217]
    Please help me,
    Regards,
    Suresh.K

  • ECC 6.0 installation error and disp+work.exe not up

    Hi guys,
               I posted a message yesterday and reposting today to be readable
               I in the middle of installation process. The system I am building Ecc 6.0 on
    windows 2003:oracle(Abab+Java).
    I am stuck in 90/96 step. this is the error message I am getting
    ERROR 2007-09-30 21:32:12
    CJS-30146  Error when creating authorization to import exchange profile.
    <br> DIAGNOSIS: Check java.log and sapinst_dev.log for details.<br>SOLUTION:
    Verify the connection to the J2EE engine.
    ERROR 2007-09-30 21:32:12
    CJS-30146  Error when creating authorization to import exchange profile.<br> DIAGNOSIS:
    Check java.log and sapinst_dev.log for details.<br>SOLUTION: Verify the connection to the J2EE engine.
    ERROR 2007-09-30 21:32:12
    FCO-00011  The step GrantRights with step key |NW_Onehost|ind|ind|ind|ind|0|0|
    SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|
    CreateExchangeProfileRights|ind|ind|ind|ind|3|0|GrantRights was executed with status ERROR .
    And also disp+work.exe is not starting up. Are these inter-related problems because
    I see j2ee included in disp+work.exe as well. please help me on this issue.
    I have posted developer trace log
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      53
    sid        EC3
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    52
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        1656
    Mon Oct 01 17:19:34 2007
    kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (53 1656) [dpxxdisp.c   1231]
         shared lib "dw_xml.dll" version 52 successfully loaded
         shared lib "dw_xtc.dll" version 52 successfully loaded
         shared lib "dw_stl.dll" version 52 successfully loaded
         shared lib "dw_gui.dll" version 52 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3953
    Mon Oct 01 17:19:39 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the
    DNS settings [dpxxtool2.c  5233]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >otisap09_EC3_53                         <
    DpShMCreate: sizeof(wp_adm)          12672     (1408)
    DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1452)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06510040, size: 4607512)
    DpShMCreate: allocated sys_adm at 06510040
    DpShMCreate: allocated wp_adm at 06511E28
    DpShMCreate: allocated tm_adm_list at 06514FA8
    DpShMCreate: allocated tm_adm at 06514FD8
    DpShMCreate: allocated wp_ca_adm at 068DA570
    DpShMCreate: allocated appc_ca_adm at 068E0330
    DpShMCreate: allocated comm_adm at 068E2270
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06963130
    DpShMCreate: allocated gw_adm at 06963170
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069631A0
    DpShMCreate: allocated wall_adm at 069631A8
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Mon Oct 01 17:19:40 2007
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 1184
      argv[0] = C:\usr\sap\EC3\DVEBMGS53\exe\jcontrol.EXE
      argv[1] = C:\usr\sap\EC3\DVEBMGS53\exe\jcontrol.EXE
      argv[2] = pf=C:\usr\sap\EC3\SYS\profile\EC3_DVEBMGS53_otisap09
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2682
      argv[5] = -DSAPSYSTEM=53
      argv[6] = -DSAPSYSTEMNAME=EC3
      argv[7] = -DSAPMYNAME=otisap09_EC3_53
      argv[8] = -DSAPPROFILE=C:\usr\sap\EC3\SYS\profile\EC3_DVEBMGS53_otisap09
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
    ***LOG Q0K=> DpMsAttach, mscon ( otisap09) [dpxxdisp.c   11414]
    DpStartStopMsg: send start message (myname is >otisap09_EC3_53                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 52
    Release check o.K.
    Mon Oct 01 17:19:41 2007
    DpJ2eeLogin: j2ee state = CONNECTED
    Mon Oct 01 17:19:52 2007
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
    ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1476
         (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2688) [nixxi.cpp    4235]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1184)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Mon Oct 01 17:20:20 2007
    ERROR => W0 (pid 1732) died [dpxxdisp.c   14021]
    ERROR => W1 (pid 3704) died [dpxxdisp.c   14021]
    ERROR => W2 (pid 328) died [dpxxdisp.c   14021]
    ERROR => W3 (pid 2056) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W4 (pid 3712) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W5 (pid 2176) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W6 (pid 1588) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W7 (pid 2276) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W8 (pid 180) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***

    Hi Surya,
    Please chech this thread. same error as No Profile used. [Useful Thread|ABAP Trial 7.01 SR3 installation problem in WIN xp sp2;
    Check antivirus or firewall running? Try to turn it off and then try again.
    Thanks
    Arun

  • Error in Server0 and disp+work.exe when I start system...

    Hi gurus,
    I´m facing with a problem when I start the system. In fact is weird because the same system before I stop it´s fine, without any problem in SAPMMC console... So now the server0 is in stopped status with exitcode -11113 and in process list the disp+work.EXE (Dispatcher) is with status message "Running, Message Server connection ok, Dialog Queue time:0.00 sec, J2EE: Some processes running" with yellow semaphore. (both situations are on following image):
    --> http://img2.imageshack.us/img2/6307/aioerror.png
    --> http://img2.imageshack.us/img2/4706/aioerror1.png
    I checked some log files dev_server0 and dev_disp, which are both in next post...

    DEV_DISP:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        AIO
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    201
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        748
    Thu Sep 10 15:40:04 2009
    kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 748) [dpxxdisp.c   1287]
         shared lib "dw_xml.dll" version 201 successfully loaded
         shared lib "dw_xtc.dll" version 201 successfully loaded
         shared lib "dw_stl.dll" version 201 successfully loaded
         shared lib "dw_gui.dll" version 201 successfully loaded
         shared lib "dw_mdm.dll" version 201 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Thu Sep 10 15:40:09 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5518]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >saperpaio_AIO_00                        <
    DpShMCreate: sizeof(wp_adm)          22784     (1752)
    DpShMCreate: sizeof(tm_adm)          5912704     (29416)
    DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F210050, size: 6607136)
    DpShMCreate: allocated sys_adm at 000000000F210050
    DpShMCreate: allocated wp_adm at 000000000F212270
    DpShMCreate: allocated tm_adm_list at 000000000F217B70
    DpShMCreate: allocated tm_adm at 000000000F217BD0
    DpShMCreate: allocated wp_ca_adm at 000000000F7BB450
    DpShMCreate: allocated appc_ca_adm at 000000000F7C1250
    DpShMCreate: allocated comm_adm at 000000000F7C3190
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F849E20
    DpShMCreate: allocated gw_adm at 000000000F849EA0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F849ED0
    DpShMCreate: allocated wall_adm at 000000000F849EE0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 1784
      argv[0] = D:\usr\sap\AIO\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\AIO\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\AIO\SYS\profile\AIO_DVEBMGS00_saperpaio
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=AIO
      argv[7] = -DSAPMYNAME=saperpaio_AIO_00
      argv[8] = -DSAPPROFILE=D:\usr\sap\AIO\SYS\profile\AIO_DVEBMGS00_saperpaio
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
    ***LOG Q0K=> DpMsAttach, mscon ( saperpaio) [dpxxdisp.c   12527]
    DpStartStopMsg: send start message (myname is >saperpaio_AIO_00                        <)
    Thu Sep 10 15:40:10 2009
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 201
    Release check o.K.
    Thu Sep 10 15:40:12 2009
    DpJ2eeLogin: j2ee state = CONNECTED
    Thu Sep 10 15:40:34 2009
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Thu Sep 10 15:40:50 2009
    my types changed after wp death/restart 0xbf --> 0x9f
    Thu Sep 10 15:41:10 2009
    ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c   15663]
    Thu Sep 10 15:41:30 2009
    ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c   15663]
    Thu Sep 10 15:41:50 2009
    ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c   15663]
    Thu Sep 10 15:45:10 2009
    ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c   15663]
    Thu Sep 10 15:45:30 2009
    ERROR => DpWPCheck: W0 (pid 1600) died (severity=0, status=0) [dpxxdisp.c   15663]
    my types changed after wp death/restart 0x9f --> 0xbf
    ERROR => DpWPCheck: W8 (pid 596) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W10 (pid 2916) died (severity=0, status=0) [dpxxdisp.c   15663]
    ERROR => DpWPCheck: W12 (pid 2828) died (severity=0, status=0) [dpxxdisp.c   15663]

  • SAP MMC DISPATCHER(Disp+Work.exe) STOPPED

    Hi friends,
    SAP MMC Dispatcher stopped. help me to resolve this issue.
    Thanks,
    DeviPriya

    hi Divyanshu,
    Here I am pasting the TRACE File.
    trc file: "dev_disp", trc level: 1, release: "741"
    sysno 00
    sid ECC
    systemid 562 (PC with Windows NT)
    relno 7410
    patchlevel 0
    patchno 11
    intno 20020600
    make multithreaded, Unicode, 64 bit, optimized
    profile \\SAPECC\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_SAPECC
    pid 3684
    Wed Apr 02 23:20:25 2014
    kernel runs with dp version 197000(ext=117000) (@(#) DPLIB-INT-VERSION-197000-UC)
    length of sys_adm_ext is 500 bytes
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3684) [dpInit.c 574]
    shared lib "dw_xml.dll" version 11 successfully loaded
    shared lib "dw_xtc.dll" version 11 successfully loaded
    shared lib "dw_stl.dll" version 11 successfully loaded
    shared lib "dw_gui.dll" version 11 successfully loaded
    shared lib "dw_mdm.dll" version 11 successfully loaded
    shared lib "dw_rndrt.dll" version 11 successfully loaded
    shared lib "dw_abp.dll" version 11 successfully loaded
    DpCheckMulticast: check of IP v4 multicast address o.k.
    rdisp/softcancel_sequence : -> 0,5,-5
    use internal message server connection to port 3901
    rdisp/shutdown/disable_login : 0
    rdisp/snapshot(CREATE): DP_CS_RESOURCES_EXHAUSTED
    rdisp/snapshot(PERIOD):300 sec
    rdisp/snapshot(LINES):10000 lines
    DpCommonParamInit: rdisp/core_file_size = default --> no change
    Wed Apr 02 23:20:30 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 4952]
    MtxInit: 30000 0 0
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >SAPECC_ECC_00 <
    DpShMCreate: alloate/attach shared memory (mode=CREATE)
    DpShMCreate: sizeof(wp_adm) 22848 (1088)
    DpShMCreate: sizeof(tm_adm) 49394544 (245744)
    DpShMCreate: sizeof(ca_adm) 432000 (72)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    DpShMCreate: sizeof(comm_adm) 7583152 (14912)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (296)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (80)
    DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    DpShMCreate: sizeof(sock_adm) 520080 (1016)
    DpShMCreate: sizeof(vmc_adm) 0 (3208)
    DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
    DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
    DpShMCreate: sizeof(websocket_adm) (ft=25664/hd=64/rec=232)
    DpShMCreate: sizeof(gw_adm) 64
    DpShMCreate: sizeof(j2ee_adm) 3936
    DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000013DE0050, size: 58350720)
    DpShMCreate: allocated sys_adm at 0000000013DE0250
    DpShMCreate: allocated wp_adm_list at 0000000013DF1CE0
    DpShMCreate: allocated wp_adm at 0000000013DF2000
    DpShMCreate: allocated tm_adm_list at 0000000013DF7B40
    DpShMCreate: allocated tm_adm at 0000000013DF7D80
    DpShMCreate: allocated ca_adm at 0000000016D132F0
    DpShMCreate: allocated comm_adm at 0000000016D7CC70
    DpShMCreate: system runs without slock table
    DpShMCreate: allocated sock_adm at 00000000174B8420
    DpShMCreate: allocated vmc_adm_list at 00000000175375B0
    DpShMCreate: system runs without VMC
    DpShMCreate: allocated gw_adm at 0000000017537850
    DpShMCreate: allocated j2ee_adm at 0000000017537A90
    DpShMCreate: allocated ca_info at 0000000017538BF0
    DpShMCreate: allocated wall_adm (ft) at 0000000017538E30
    DpShMCreate: allocated wall_adm (fi) at 00000000175432F0
    DpShMCreate: allocated wall_adm (head) at 0000000017553C80
    DpShMCreate: allocated amc_rec_adm (ft) at 0000000017553EC0
    DpShMCreate: allocated amc_rec_adm (fi) at 0000000017569280
    DpShMCreate: allocated amc_rec_adm (head) at 0000000017579C10
    DpShMCreate: allocated websocket_adm (ft) at 0000000017579E50
    DpShMCreate: allocated websocket_adm (head) at 0000000017580490
    DpShMCreate: initialized 21 eyes
    DpSysAdmIntInit: initialize sys_adm
    Scheduler info
    WP info
    #dia = 10
    #btc = 0
    #standby = 0
    #max = 21
    General Scheduler info
    preemptionInfo.isActive = true
    preemptionInfo.timeslice = 500
    preemptionInfo.checkLoad = true
    Prio Class High
    maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
    maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
    Prio Class Normal
    maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
    maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
    maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
    withPrioTickets[RQ_Q_PRIO_NORMAL] = true
    Prio Class Low
    maxRuntime[RQ_Q_PRIO_LOW] = infinite
    maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
    maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
    withPrioTickets[RQ_Q_PRIO_LOW] = true
    DpCommAttachTable: attached comm table (header=0000000016D7CC70/ft=0000000016D7CC80/fi=000000001749B100)
    DpSockAttachTable: attached sock table (header=00000000174B8420/ft=00000000174B8430)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpSockInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 21 initializing ....
    <ES> EsILock: use Semphore 33 for locking
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 5734MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 5736MB
    <ES> Info: disclaim threshold = 0 MB
    <ES> Info: disclaim coasting/alloc = 300 s
    <ES> Info: disclaim coasting/free = 0 s
    <ES> Info: blockdisclaimsize_KB = 0 KB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1433 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    rdisp/calculateLoadAverage : 1
    ***LOG Q0K=> DpMsAttach, mscon ( SAPECC) [dpMessageSer 1637]
    DpStartStopMsg: send start message (myname is >SAPECC_ECC_00 <)
    DpStartStopMsg: start msg sent to message server o.k.
    MBUF state LOADING
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=6395 reserved=1918 quota=10%
    CCMS: Initialized monitoring segment of size 60000000.
    CCMS: Initialized CCMS Headers in the shared monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: AlMsUpload called by wp 1024.
    Wed Apr 02 23:20:31 2014
    CCMS: AlMsUpload successful for D:\usr\sap\ECC\DVEBMGS00\log\ALMTTREE.DAT (1055 MTEs).
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpCheckPreemptionTicker: created thread for DpPremptionTicker
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1140]
    MBUF state ACTIVE
    DpMBufTypeMod: MBUF component UP (event=MBUF_DPEVT_UP)
    DpMsgProcess: 1 server in MBUF
    DpMsCheckServices()
    DpMsCheckServices: send DpDelService(J2EE) to msgserver
    DpMsgProcess: MBUF state is MBUF_ACTIVE
    DpMBufReset: state = MBUF_PREPARED
    Wed Apr 02 23:21:10 2014
    *** ERROR => DpHdlDeadWp: W0 (pid 3400) died (severity=0, status=0) [dpxxwp.c 1278]
    ********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - begin **********
    Scheduler info
    WP info
    DpNumberOfDiaWps: dia_wps 9, standby_wps 0
    #dia = 9
    #btc = 3
    #standby = 0
    #max = 21
    General Scheduler info
    preemptionInfo.isActive = true
    preemptionInfo.timeslice = 500
    preemptionInfo.checkLoad = true
    Prio Class High
    maxRuntime[RQ_Q_PRIO_HIGH] = 600 sec
    maxRuntimeHalf[RQ_Q_PRIO_HIGH] = 300 sec
    Prio Class Normal
    maxRuntime[RQ_Q_PRIO_NORMAL] = 3600 sec
    maxRuntimeHalf[RQ_Q_PRIO_NORMAL] = 1800 sec
    maxTicketsForPrio[RQ_Q_PRIO_NORMAL] = 8
    withPrioTickets[RQ_Q_PRIO_NORMAL] = true
    Prio Class Low
    maxRuntime[RQ_Q_PRIO_LOW] = infinite
    maxRuntimeHalf[RQ_Q_PRIO_LOW] = infinite
    maxTicketsForPrio[RQ_Q_PRIO_LOW] = 8
    withPrioTickets[RQ_Q_PRIO_LOW] = true
    Actual tickets in use
    actTicketsInUseForPrio[RQ_Q_PRIO_NORMAL] = 0
    actTicketsInUseForPrio[RQ_Q_PRIO_LOW] = 0
    Queue Statistics Wed Apr 02 17:51:10 2014
    Number of lost wakeup datagrams: 0
    Max. number of queue elements : 14000
    NOWP: 0 (peak 2, writeCount 8, readCount 8)
    DIA: 4 (peak 4, writeCount 4, readCount 0)
    UPD: 0 (peak 0, writeCount 0, readCount 0)
    ENQ: 0 (peak 0, writeCount 0, readCount 0)
    BTC: 0 (peak 0, writeCount 0, readCount 0)
    SPO: 0 (peak 0, writeCount 0, readCount 0)
    UP2: 0 (peak 0, writeCount 0, readCount 0)
    Session queue dump (high priority, 1 elements, peak 1):
    -1 <- 26 < EmbryoQueue_DIA> -> -1
    Session queue dump (normal priority, 0 elements, peak 0):
    Session queue dump (low priority, 0 elements, peak 0):
    Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
    -1 <- 1 (rq_id 3, DIA, REQ_HANDLER_AUTOTH) -> 2
    1 <- 2 (rq_id 5, DIA, REQ_HANDLER_MSADM) -> 3
    2 <- 3 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 0
    3 <- 0 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
    Infos about some special queues:
    Queue <DispatcherQueue> in slot 0 (port=55937) has no requests
    Queue <GatewayQueue> in slot 1 (port=0) has no requests
    Queue <IcmanQueue> in slot 2 (port=56301) has no requests
    Queue <StartServiceQueue> in slot 3 (port=0) has no requests
    Workprocess Table (long) Wed Apr 02 17:51:10 2014
    Current snapshot id: 1
    Number of preemptions : 0
    |No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
    |---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
    | 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 1|3276 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 2|3764 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 3|3980 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 4|3752 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 5|3296 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 6|2828 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 7|204 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 8|3112 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 9|1616 |DIA |WP_NEW | | | | | | | | | | | | | |
    | 10|2980 |UPD |WP_NEW | | | | | | | | | | | | | |
    | 11|2852 |BTC |WP_NEW | | | | | | | | | | | | | |
    | 12|2368 |BTC |WP_NEW | | | | | | | | | | | | | |
    | 13|136 |BTC |WP_NEW | | | | | | | | | | | | | |
    | 14|3756 |SPO |WP_NEW | | | | | | | | | | | | | |
    | 15|324 |UP2 |WP_NEW | | | | | | | | | | | | | |
    Session Table Wed Apr 02 17:51:10 2014
    No logons/sessions found
    CA Blocks
    1 INVALID -1
    1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
    ********** SERVER SNAPSHOT 1 (Reason: Workprocess 0 died) - end **********
    ***LOG Q41=> DpDumpInternalTables, () [dpxxdisp.c 3200]
    *** ERROR => DpHdlDeadWp: W1 (pid 3276) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W2 (pid 3764) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W3 (pid 3980) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W4 (pid 3752) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W5 (pid 3296) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W6 (pid 2828) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W7 (pid 204) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W8 (pid 3112) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W9 (pid 1616) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W10 (pid 2980) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W11 (pid 2852) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W12 (pid 2368) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W13 (pid 136) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W14 (pid 3756) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** ERROR => DpHdlDeadWp: W15 (pid 324) died (severity=0, status=0) [dpxxwp.c 1278]
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    *** DP_FATAL_ERROR => DpWpCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiIWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:11 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:12 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:13 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:14 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:15 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:16 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:17 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:18 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:19 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:20 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long) Wed Apr 02 17:51:20 2014
    Current snapshot id: 1
    Number of preemptions : 0
    |No |Pid |Type|State |Cause|Err|Prio|Sess-Key |Sess-Type|Locked|Sem|Time |Program |Cli|User |Action |Action-Info |
    |---+------+----+-------+-----+---+----+----------------+---------+------+---+-----+----------------------------------------+---+------------+--------------------+--------------------|
    | 0| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 1| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 2| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 3| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 4| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 5| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 6| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 7| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 8| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 9| |DIA |WP_KILL| |1 | | | | | | | | | | | |
    | 10| |UPD |WP_KILL| |1 | | | | | | | | | | | |
    | 11| |BTC |WP_KILL| |1 | | | | | | | | | | | |
    | 12| |BTC |WP_KILL| |1 | | | | | | | | | | | |
    | 13| |BTC |WP_KILL| |1 | | | | | | | | | | | |
    | 14| |SPO |WP_KILL| |1 | | | | | | | | | | | |
    | 15| |UP2 |WP_KILL| |1 | | | | | | | | | | | |
    Queue Statistics Wed Apr 02 17:51:20 2014
    Number of lost wakeup datagrams: 0
    Max. number of queue elements : 14000
    NOWP: 0 (peak 2, writeCount 8, readCount 8)
    DIA: 4 (peak 4, writeCount 4, readCount 0)
    UPD: 0 (peak 0, writeCount 0, readCount 0)
    ENQ: 0 (peak 0, writeCount 0, readCount 0)
    BTC: 0 (peak 0, writeCount 0, readCount 0)
    SPO: 0 (peak 0, writeCount 0, readCount 0)
    UP2: 0 (peak 0, writeCount 0, readCount 0)
    Session queue dump (high priority, 1 elements, peak 1):
    -1 <- 26 < EmbryoQueue_DIA> -> -1
    Session queue dump (normal priority, 0 elements, peak 0):
    Session queue dump (low priority, 0 elements, peak 0):
    Dump of queue <EmbryoQueue_DIA> in slot 26 (4 requests, port=0):
    -1 <- 1 (rq_id 3, DIA, REQ_HANDLER_AUTOTH) -> 2
    1 <- 2 (rq_id 5, DIA, REQ_HANDLER_MSADM) -> 3
    2 <- 3 (rq_id 13, DIA, REQ_HANDLER_AUTOABAP) -> 0
    3 <- 0 (rq_id 15, DIA, REQ_HANDLER_BGRFC_WATCHDOG) -> -1
    Infos about some special queues:
    Queue <DispatcherQueue> in slot 0 (port=55937) has no requests
    Queue <GatewayQueue> in slot 1 (port=0) has no requests
    Queue <IcmanQueue> in slot 2 (port=56301) has no requests
    Queue <StartServiceQueue> in slot 3 (port=0) has no requests
    Logon Table Wed Apr 02 17:51:20 2014
    No logons/sessions found
    CA Blocks
    1 INVALID -1
    1 ca_blk slots of 6000 in use, 1 currently unowned (in request queues)
    NiIWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:21 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:22 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:23 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:24 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:25 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: timeout 500ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    NiISelect: TIMEOUT occured (5000ms)
    DpSkipSnapshot: delayed snapshot exist, skip new snapshot
    DpHalt: shutdown server >SAPECC_ECC_00 < (normal)
    DpUpdateStatusFile: update status file D:\usr\sap\ECC\DVEBMGS00\work\disp+work.status, unique number = 2
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 353 sent data (wrt=110,pac=1,MESG_IO)
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    NiMyHostName: hostname = 'SAPECC'
    NiHLGetNodeAddr: found hostname 'SAPECC' in cache
    NiIGetNodeAddr: hostname 'SAPECC' = addr 192.168.50.22
    NiHLGetHostName: found address 192.168.50.22 in cache
    NiIGetHostName: addr 192.168.50.22 = hostname 'SAPECC' (fq)
    DpMsUpdateLogon: dp_service: sapdp00
    NiSrvLGetServNo: found service name 'sapdp00' in cache
    NiIGetServNo: servicename 'sapdp00' = port 3200
    DpMsUpdateLogon: set LB=0
    MsIBuildLogonData: prot = MS_LOGON_DIAG (2)
    MsIBuildLogonData: port = 3200 (4)
    MsIBuildLogonData: addr (IPv4) = 192.168.50.22 (8)
    MsIBuildLogonData: host = SAPECC (20)
    MsIBuildLogonData: misc = LB=0 (26)
    MsIBuildLogonData: addr (IPv6) = 192.168.50.22 (44)
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufSend starting
    NiIWrite: hdl 353 sent data (wrt=160,pac=1,MESG_IO)
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiWrite: sent 160 bytes
    MsISnd2: send msg (ms hdr/msg 110/50 bytes) to name MSG_SERVER, type 0, key -
    MsSndName: MS_SET_LOGON ok
    Send 50 bytes to MSG_SERVER
    MS_SET_LOGON : asynchronous call
    DpMsUpdateLogon: gw_service: sapgw00
    NiSrvLGetServNo: found service name 'sapgw00' in cache
    NiIGetServNo: servicename 'sapgw00' = port 3300
    MsIBuildLogonData: prot = MS_LOGON_RFC (2)
    MsIBuildLogonData: port = 3300 (4)
    MsIBuildLogonData: addr (IPv4) = 192.168.50.22 (8)
    MsIBuildLogonData: host = SAPECC (20)
    MsIBuildLogonData: addr (IPv6) = 192.168.50.22 (40)
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufSend starting
    NiIWrite: hdl 353 sent data (wrt=156,pac=1,MESG_IO)
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiWrite: sent 156 bytes
    MsISnd2: send msg (ms hdr/msg 110/46 bytes) to name MSG_SERVER, type 0, key -
    MsSndName: MS_SET_LOGON ok
    Send 46 bytes to MSG_SERVER
    MS_SET_LOGON : asynchronous call
    DpHalt: switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    DpHalt: stop work processes
    DpHalt: stop gateway
    killing process (2160) (SOFT_KILL)
    DpHalt: stop icman
    killing process (776) (SOFT_KILL)
    DpHalt: terminate gui connections
    DpHalt: wait for end of work processes
    DpHalt: wait for end of gateway
    [DpProcDied] Process lives (PID:2160 HANDLE:1008)
    DpHalt: waiting for termination of gateway ...
    NiIWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:26 2014
    NiISelect: TIMEOUT occured (500ms)
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died (PID:2160 HANDLE:1008 rc:0x0)
    DpHalt: wait for end of icman
    [DpProcDied] Process lives (PID:776 HANDLE:1016)
    DpHalt: waiting for termination of icman ...
    NiIWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:27 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives (PID:776 HANDLE:1016)
    DpHalt: waiting for termination of icman ...
    NiIWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:28 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives (PID:776 HANDLE:1016)
    DpHalt: waiting for termination of icman ...
    NiIWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:29 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives (PID:776 HANDLE:1016)
    DpHalt: waiting for termination of icman ...
    NiIWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1109
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 23:21:30 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died (PID:776 HANDLE:1016 rc:0x0)
    DpStartStopMsg: send stop message (myname is >SAPECC_ECC_00 <)
    DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPECC_ECC_00 , sapsysnr= 0, hostname=SAPECC
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 60
    AdCallRegisteredCvtToExt: opcode 60 call 0000000140F644E0
    AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 4
    AdCallRegisteredCvtToExt: opcode 4 call 0000000140F62060
    AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
    DpRqCreate: creating REQ_HANDLER_ADM request (rq_id 18, slot 13)
    DpRqConvertToNetForm: converted from intern to net (164 bytes, reqRc 0), rq_id 18
    DpRqFree: freeing REQ_HANDLER_ADM request (rq_id 18, slot 13)
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufSend starting
    NiIWrite: hdl 353 sent data (wrt=866,pac=1,MESG_IO)
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiWrite: sent 866 bytes
    MsISndTypeOnce: send msg (ms hdr/msg 110/756 bytes) to MSG_SERVER, type 1
    DpStartStopMsg: stop msg sent to message server o.k.
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    NiIRead: hdl 353 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 353
    NiBufReceive starting
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiRead: received 274 bytes
    MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 353
    NiBufReceive starting
    <<< NiBufISelUpdate: hdl 353(0, SAP_O_K)
    MsINiRead: received 114 bytes
    MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
    DpHalt: received 4 bytes from message server
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    NiIRead: hdl 353 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 353
    NiBufReceive st

Maybe you are looking for

  • Consuming external webservice in SAP

    Hi All, Wjile Consuming external webservice that is .NET webservice in SAP I am getting the error "Proxy generation terminated: WSDL (<extension> not supported)". Please can anyoone tell me what would be the issue and how should I resolve it. Thanks

  • Variable scope with loaded external SWF's?

    I've got an SWF, call it calcLite, that will be deployed both independently (ie: attached to an HTML doc) and also imported at run time (linked as an external asset via the loader class) to another SWF, let's call it calcPro. That part is working fin

  • How to adjust screen font for ipone 3GS

    My font on my iphone 3gs just went to about font size 36. How do I get it back to normal size?

  • The logic is done, but my LAYOUT looks Awful!!! help?

    You guys have been great in helping me get through my little trivia game project and I believe I have ALL the logical processing in place, but the final and saddest MOST BLARING problem now is this DISGUSTING Layout. Here is the link: http://www.flic

  • Replacement of obsolete FM 'HELPSCREEN_NA_CREATE'

    hi all, Any one can help me with the replacement of 'HELPSCREEN_NA_CREATE'? Thanks Protyusha