SAP - Microsoft word link

Hi all,
I am trying to put link in MS Word using field code (insert -
> Field) as below
LINK SAP.OLELinkServer.ItemObject.1 "SAPOLELinkServerDMS" Document.DRAW.DOKNR" \a \t
but it is not working
as above class is not there
sap help reference http://help.sap.com/erp2005_ehp_02/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
Please suggest
Regards
Niketan

Hi,
Same question, however, it relates to Office 2007 and now recently Office 2010.
Is this still supported in these versions, and if so, how does one go about adding the links.
If you insert Quick Object>Link>... You dont have the option to select the SAP.OLELinkServer
If you manually edit it, it doesnt work either.
Please advise.
Thanks.
Freddie.

Similar Messages

Conversion of Microsoft Word 2010 to PDF-Links not working in the PDF

I have a Windows 7 Professional 64 Bit Operating System and Microsoft Word 2010. There is a particular word document(Word 2010) that I need to convert to PDF.I did a "save as" and stored it as a PDF. But the issue in the PDF is that the links in the "Table of Contents" do NOT work. I am using Adobe Reader 10.1.2.Please let me know how could I do the conversion and how can the links work correctly

Adobe Reader 10.1.2 cannot convert DOC files to PDFs. You will need Adobe Acrobat to do this.
Save As > Adobe PDF feature is using Microsoft's PDF converter. You may need to follow up with them regarding the same.

Live links in PDFs generated from Microsoft Word 2008?

A couple of years ago, I was informed that my live links (bookmarks, indexmarks, etc.) in documents generated by Microsoft Word 2004 for the Macintosh did not become PDF live links in Acrobat Standard 7 because the Mac version from Microsoft Word 2004 didn't use the necessary hooks (
i "APIs"
or something like that) even though the Windows version did.
Now that MS Word/MS Office 2008 for the Mac is coming out, will we be able to generate PDFs with such live links.
Any input will be most appreciated.
Acrobat Standard 7.0.9. Tiger 10.4.11. Dual bootable, DP MDD 1.25GHz G4 (2004), maxed out at 2GB of RAM, both Spotlight and Dashboard disabled, Photoshop primary scratch disk on dedicated 160GB internal drive, at least 100GB available on each of the four internal drives, up to 300GB on some. Counting external FW drives just over 1TB of drive space available. nVidia GeForce 7800 GS 425MHz 256 MB graphics display card. Processor napping enabled through CHUD 3.5.2.

While this does not answer the problem of live links. (You can create them Manually, they just are not generated direct from Office Mac).
The answer to the other question of the little annoying PDFMaker Menu (that never really worked correctly for me (took 5 minutes just to generate a 108K PDF).
Because MicroSoft took out VBA Support on Mac side That rendered the PDFMaker menu useless because it uses VBA to work.
So what they have done in Word 2008 is actually put it as Translator choice on the save menu. They now directly can save Word Files directly as PDF files. once you have created your file and saved it. Then go again to *Save As....* , when menu open scroll mouse down until you run across the choice PDF. select that and save. not only is it easier a 108K document can be saved in about 15 seconds or less not the old 5 minutes going through PDFMaker.
One of PDFMaker's failings was that each step of conversion it called up Distiller which first created a .PS file. Then it checked the file. Then created the PDF file. Then checked the file again before actually writing the PDF File. Then only after checking the written PDF, would it delete the invisible PS file. Finally the PDF file was created. Naturally with all the check steps if you have a very large file could take ages.
With word's new feature (2008) you can generate a PDF at blinding speeds.

How do you retain links within a page when converting from Microsoft word from a Mac?

Keeping Microsoft Word page links within a document or converting the filed map into bookmarks are not options when you work on a Mac. I subscribe to the Adobe Acrobat Plus service specifically to address that issue. But I can't find any documentation on this site that will walk one through the process. Can someone please direct me to a tutorial page that will allow me to keep my links and convert my bookmarks?

Have you tried using Safari's built-in method to email the content of a web page?
File > Mail Contents of This Page
(Keboard shortcut: Command-I)
If you don't want to email the entire page's content, you can easily edit it in the resulting email window, deleting the portions that you don't want.
Message was edited by: Rachel R

HELP!!!! I have spent hours trying to find out how to embed an image with a link or a Microsoft Word document with a hyperlink built within the document -- not as an attachment! Does ANYONE know the secret? Can it be done, or not! My PC clients do it.

HELP!!!! I have spent hours trying to find out how to embed an image with a link, or embed a Microsoft Word document with a hyperlink built within the document -- not as an attachment into my email -- but where it shows as the email content when opened! Does ANYONE know the secret? Can it be done, or not? My PC clients do it all the time easily. Then I want to be able to send the embedded image/document (not as an attachment, but visable within the email when opened) to many email contacts at once, BUT the individuals receiveing them DO NOT SEE the other email contacts. Cannot seem to be able to find anything on being able to do these 2 tasks.PLEASE, SOMEONE, HELP!!!

Don't know if this applies to Lion, but read here:
http://www.makeuseof.com/tag/create-html-announcement-mail-iweb-mac/

Microsoft word is printed very time when I add A/R invoice in SAP B1

When I add A/R invoice SAP B1 will print Microsoft word every time.
I want to disable it. How can I do?
Thank you

Hi,
Please, check to see what is set up in your database:
Go to Administration >>> Set up >>> General >>> User : choose the user. Click to drilldown at "Default" field to open a window. In Print tab, choose Document : AR Invoice and uncheck "Add button will also export to MS Word"
Hope this helps,
Son.

How to store microsoft word doc in SAP

Hello Frndsm
I have a text editor defined on my screen. I want to store microsoft word document .doc in it. and also i want function so that i can load .doc in it. Is there any way I can do??
Your help will be greatly appreciated
Regards,
Arpit

It doesnt matter. All user want is to upload a word document in the editor box and display its contents as it is. But what basically is happening that the CL_GUI_TEXTEDIT class iam am currently using is only supporting plain text and showing rest all chars as garbage.
so is there anyway???
thanks for ur reply
Arpit

I'm on Windows XP, Firefox 3.6.25 and Microsoft Word v.7 for Windows 95. Is my old Word version preventing hyperlinking? I've found NO way to do it -- no toolbar link buttons, no hyperlink options when I right-click, or anything. Help?

Windows XP
Firefox 3.6.25
Microsoft Word v.7 for Windows 95

I had a similar problem trying to install Win7 x64 on my 2009 iMac. I finally copied the entire Boot Camp driver folder from the OS X installation DVD to Windows. Then I went to \drivers\bootcamp64.msi, right-clicked on it and selected Troubleshoot Compatibility. Windows chugged a bit and came up with a dialog that said Try Recommended Settings. Click on that, then Start Program. The Boot Camp installer now worked great.
Give it a shot.

Upload PDF/Microsoft word file to the portal

Dear All,
Anyone knows how to upload a PDF/Microsoft word so that i can create a link for the user to download it.?
Thanks
Regards,
Bryan

I am able to upload file now after using the SAP 898637 correction?
How can i create an iview for that document?
Thanks
Regards,
Bryan

Adobe does not recognize footers in Microsoft Word 2007 to PDF

I have copied and pasted the details, below, from a previous message I have sent out to an assistive technology listserv.
I am encountering this problem with various builds and versions of Adobe Acrobat:
Acrobat X on a Windows Vista 64-bit build (note that this is the best Acrobat I can install on Windows Vista, Adobe Reader XI is not even supported)
Acrobat X on a Windows XP build, sorry, do not know the bit count (it is my work computer so I can't upgrade anything)
Acrobat 9 on a Windows 7 64-bit build.
I have also encountered and checked into whether or not the PDF reads (and does what I want it to) in JAWS 14, latest update (Feb 2013). We encounter the same problem with JAWS and this morning found out that there is a conversion error between Word and Adobe. (See this post, where the ---- are).
Summary, I have spoken with JAWS, put out a support ticket with NVDA via e-mail, spoken with Microsoft, and tried to communicate with Adobe about this issue for help and Adobe is refusing to help. The other places tried everything they knew but they could not get it to work. I even tried to strip all the page numbers from Word and number using Adobe's page numbering feature, but that was not successful either because I cannot use Roman numerals.
I would appreciate any feedback the Adobe Forums can give me; please note that I cannot post a sample document at this time as the only document I have is a private work document (cannot share those by policy, so I will have to make up a fake document if I get the time and energy).
Thank you very much for your time and expertise. The pertient info is above and below in "Original Message" and "Activities section" - the other information is there if you'd like to look. And to provide feedback to Adobe about things I think they could improve, since they will not let me email them directly.
----Original Message----
My question concerns the reading of Footers / Headers in Microsoft Word 2007 and Adobe Acrobat (headers/footers designed in Microsoft Word 2007 and then converted to PDF with "Bookmark" checked in Adobe Acrobat conversion settings).
The document is a word document containing 50+ pages. There are 12 pages of "front matter" that are marked with Roman numerals. Subsequently, the body text of the document has an Arabic number (1, 2, 3, 4, etc.) in the bottom right corner. Footers are used properly in the document. All Table of Contents links, which do link to both headings in the "front matter" and to headings in the body text, are picked up properly. Literately, the only thing not reading on the document are page numbers (the Word Status bar is reading its page numbers, but the page numbers in the footer are not reading).
I then need to convert the document to Adobe Acrobat PDF. Granted, I have a full copy of Adobe Acrobat X available to me, and my various assistive technologies have always functioned better when opened directly in Acrobat (rather than Adobe Reader). So, I set the accessibility options (from Word) properly, asking it to bookmark Headers and Footers as appropriate, thinking that this will pick up the page numbers and make them read as the bottom right corner of my PDF.
All links work in Adobe to navigate by section/heading. All figures are alt tagged. Everything is perfect - but the one thing that NVDA won't read are the page numbers. Visually, the page numbers are there on the document, but NVDA won't pick them up. Additionally, I also changed the appropriate page numbers in Adobe (Page Thumbnail Pane, on the Navigation Pane I believe it is called) - to reflect the section where it is Roman numerals and Arabic numerals. This did not help, and for what it is worth, I cannot get NVDA to voice when I am in this pane, so I don't seem to have a chance of getting the page number info from there.
NVDA reads the document just fine except for the above-mentioned snare. However, when it reads, it will go to the next page, and say, "Page 2 of 54, (page text), Page 3 of 54 (page text)," etc. when I will need it to say Page ii of 54 (page text), Page iii of 54 (page text)," and so on, changing to "Page 1" when the Arabic numbers are used.
I know that the Page Label issue is part of Adobe's issue, with them not releasing the PageLabel aspect. (I have looked through some NVDA tickets). I do not know how to put a "changeset" into my copy of NVDA though, or even if it would help (I have no computer scripting skill). The easy answer would be to upgrade to Adobe Reader XI and see if that helps, but I don't have the ability to put it on every computer I use, and *I need this file to read consistently across multiple versions of Adobe* (including Adobe Reader/Acrobat 9, X, and XI). (This file is also going out to people who may not have the latest version of Adobe, but are also running some copy of NVDA, either a portable or a full install).
Is there any way to pick up the Footers with page numbers voicing in NVDA, and/or have it read the user-editable page number box that is on Adobe's Toolbar (next to the 1 of 54 parentheses). This user-editable box, to jump to page numbers, reflects the Roman numerals I have loaded into the pages of Adobe. When I press Ctrl+Shift+N in Adobe, I can also go to the appropriate page (if I type in iii, it will take me to iii, if I type in 34, it will take me to the Arabic number 34 -- NOT the 34 of 54, which would land me on a different page. And I want to land on the page that has the Arabic 34, so that's functioning fine.
I just need the page numbers in the footer to voice, "Page iii," or "Page iv," or "Page 29," etc. If I could get NVDA to do that, I could say to viewers of this document, "If you are using NVDA, remember to Ctrl+Shift+N to get the GoTo Box, then type in the page number you want if you cannot follow a link or a bookmark." This document is *very* accessible in my opinion with lots of ways to navigate...the only aspect of navigation that isn't being picked up are those footer page numbers!
I do have my Document Formatting settings on the NVDA menu set to "Report Headers," but that does not seem to help in either Microsoft Word 2007 or Adobe Acrobat. I have even switched the page numbers from the footer to the header to see if that would help and it didn't.
----Activities I have done today----
I spent over an hour on the phone today with Freedom Scientific (makers of JAWS) trying to troubleshoot this. We discovered that Footers will not read very well in JAWS and Microsoft Word 2007 (only solution is to stop reading document text and read Virtual Viewer text briefly, then go back out to document text, then back into Virtual Viewer which is NOT an acceptable or accessible solution whatsoever -- too much work for someone trying to read the document) -- and then we also discovered that:
Upon conversion from Word 2007 to .txt file (.docx to .txt), there are no alt tags for the figures in the document, or page numbers.
Upon conversion from Word 2007 to Adobe Acrobat X then to .txt file, every insert of a page number and footer is replaced with the same alt numberpad numerical code: the one that generates female. ♀No wonder JAWS and NVDA are skipping this, neither understand how to communicate it.
On the advice of JAWS Technical Support I contacted Microsoft Accessibility Technical Support and spent an hour on the phone with them. They say that unless Adobe can find a solution, it appears that it is impossible for Microsoft products to read the footer if JAWS was unsuccessful doing what I wanted it to do. The document/footer in question includes about 12 pages of front matter (numbered in Roman numerals) and 44 pages of body text (numbered in Arabic numerals).
I kindly explained to the Microsoft Support Agent that I found this issue hard to believe, although I understood. Sighted folks have the ability to make their documents look quite professional and that is the caliber and quality of documents anticipated from everyone, especially college students graduating from school, or job applicants. That a coding issue prevents the footer from being read properly, except in Edit view, is disappointing. The representative was with me 100% of the way. She completely understood where I came from. And yes, when I am designing the document myself, I know what I put there (or I pretty much do, anyway). But if I recieve a document, it is much harder to tell what is really there or not, or how the page numbers really lay. And this is confusing as heck, believe me.
I then called Adobe Technical Support, after having a brief online chat with them. Granted, I had to leave the chat in the middle because I got interuptted by something that was high-priority, but the woman chatting from Adobe says that chat is only for installation issues, and I will have to pay to open a support ticket. Excuse me? I have paid a hefty sum of money for Adobe Acrobat 9 and Adobe Acrobat X (work paid for the other Acrobat X copy). I deserve this problem to be troubleshooted for free. There was even a statement on the Adobe Acrobat X website that said Acrobat X users didn't have to pay for support, but Reader users did.
----Slight bit of rant and constructive criticism----
In speaking with Adobe Technical Support, I had to wait on hold for 30 minutes before my call was answered, and then I had to consent to being on hold countless times and had to answer, "Yes, I am converting from Word 2007 to PDF using Adobe Acrobat X" at least 6 times. The representative would put me on hold, then ask me the question, then put me on hold again, repeated 6 times over 45 minutes. At the end of 45 minutes (1 hour and 20 minutes of wasted time by now, that I must justify to my employer) - I told the representative I wanted to speak with his supervisor immediately, I did not care if he was trying to fill out a support ticket (and putting me on hold at least 4 more times in 10 minutes while he claimed he was filling out the support ticket) - and finally he put me on hold again and gave me to a very helpful supervisor. Within 6 minutes of speaking with the supervisor the supervisor had my support ticket filled out and I should recieve a call from Adobe within the next 30 minutes if his estimation was right (he estimated two hours, but it's been an hour and a half).
I have yet to know what can be done about my document. Freedom Scientific Technical Support is closed now for the day and I need to work tomorrow and Friday away from the phone. As I stated to Microsoft Accessibility Support, I truly feel that Adobe should read the page footers, every document says that Adobe should be able to read the page footers, and I feel slighted that as a person who uses assistive technology, there is some glitch that isn't making this happen. I am not blaming a specific place per se, except I am a little frustrated with Adobe especially since they have not gotten back to me, and I am frustrated with their customer service. JAWS customer service and Microsoft customer service were both exemparly, and I cannot say enough good things about them. My wasted time with Adobe however, that was disrespect in my opinion. And I certainly will not pay to open a support ticket, and my workplace has a site license. They've paid enough already.
If you've read this far, thank you. I look forward to replies, or at least understanding. And if anyone has ideas, I'd appreciate it very much (yes, I have tried taking the page numbers off and using Adobe's page number feature, but that would not allow Roman numerals. Only Arabic.).

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

Adding Company Knowledge with OpsMgr 2012 Console - "Failed to launch Microsoft Word"

Hi everyone!
I'm trying to add company knowledge using the OpsMgr 2012 console (32-bit) on Windows 7 Ultimate (32-bit) using the guidelines provided at the following link...
http://technet.microsoft.com/en-us/library/hh212900.aspx
I'm using Office 2010 Pro Plus SP1 (32-bit) with the .NET Programmability feature and the Microsoft Visual Studio 2005 Tools for Office Second Edition Runtime installed, but I get the dreaded "failed to launch Microsoft Word" error...
...any help or guidance would be greatly apprecaited!
Regards,
JJ

Thanks Andres!
I have confirmed that the following instructions does allow you to use Word 2010 32-bit running on Windows 7 64-bit or Windows Server 2008 R2 to edit company
knowledge...
1. Go to the directory where the OpsMgr console is installed (example: C:\Program Files\System Center\Operations Manager 2012\Console )
2. Make a copy of Microsoft.EnterpriseManagement.Monitoring.Console.exe.config
3. Edit Microsoft.EnterpriseManagement.Monitoring.Console.exe.config using Administrator rights
4. Search for “</dependentAssembly>” and remove the “<publisherPolicy apply="no" />” line immediately following the “</dependentAssembly>” line
Hope this helps!
Regards,
JJ
Well, firstly I have to agree with other people's comments along the lines of "It shouldn't be this hard!", but I can happily say that the solution above (by IM5FOOTNOTHIN)
worked for me...once I noticed this crucial footnote: "Do this for
ALL instances of the
<publisherPolicy apply="no" /> line that immediately follow the </dependentAssembly> line"

I updated to Firefox 4, and now it won't open Word documents. It doesn't even give me an option to open or save. When I looked under Tools, Applications - Microsoft Word was not in the Content list. What can I do to restore automatic opening of Word?

Word opens fine in other browsers.
The web link, ending in doc, appears at the bottom of the page - but Firefox just stays on the original page.

Ok, when you go to the Content menu, you see a list of files which are set to open with a particular program by default.
To change the application, click the one which is assigned to it already and then from the dropdown menu which appears, click the bottom option called "Use Other".
This will open a menu where you'll see another set of apps you can use to open the file with. If Microsoft Word is not in the list, click the "Browse" button and then navigate to the folder containing Word.exe. I don't have it on my system, but I believe you'll find it in C:\Program Files\Microsoft\Word

When I try and open Microsoft Word 2011 documents they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens?

When I try and open Microsoft Word 2011 documents on my IMAC they start opening one after another at a rapid speed and I can't stop it. I reboot and same thing happens. The documents open in rapid succession on their own and don't stop until I force close or after maybe 100 or more open I start getting the following message for each document attemting to open "This document could not be registered. It will not be possible to create links from other documents to this document" and then in paretheses the name of the document. After I click okay another trys to open. Any suggestions?

If you had multiple documents open and quit the app without closing all of the docs first, it will open them again when you launch the app. Open Word, and then close all the documents, you may be asked to save the document, if the document was already saved but you made changes to it before you quit the app, you may need to save the changes first, shorcut ( command and s keys). After you close all of the documents then quit the app and restart the computer. See if this works.

Document library in Explorer showing empty folder and edit in microsoft word not is also not working

Hello
I am facing strange issue. I have two different SP2010 environment on two different servers i.e. dev1 and dev2 and each envionment we have one web application i.e.
http://dev1/ and http://dev2/
I am testing this environment from my desktop which has Windows 7, IE8, Office 2010.
I tested Dev1 url on my desktop, and able to open document library using windows explorer, I am able to see files and folders. I am also able to use "Edit in Microsoft Word" is options is working on my desktop. Infact tested on other machine, it
is working fine.
Then I tested Dev2 url, I am able to open dcument library using windows explorer on my desktop, but it is not showing any files and folders and when I tried to to use "Edit in Microsoft Word" got the error "The document could
not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document". When I test dev2 url on other machine it is working without any problem. However I am able to upload and download from the document
library.
I googled a lot but could not findout a perfect solution, Please let me guide what I am missing here.
Avian

Hi Avian,
Which suggestions did you do for resoving this issue?
Below are some troubeshotting for you:
Make sure your IE 8 is 32-bit
Add the URL of dev2 to Trusted Site
Make sure that SharePoint OpenDocumentsClass and SharePoint OpenXMLDocuments are enabled as IE Options->Programs->Manage add-ons
Repaire Office 2010 under Control Panel
Here is a similar post, in the reply section, there are some suggestions, please take a look at:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3e8c0976-2794-49a2-92fe-6a254b3cc4ca/a-microsoft-sharepoint-foundation-compatible-application-could-not-be-found?forum=projserv2010setup
Also check whether this link is useful:
http://support.microsoft.com/kb/2823322/en-us
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word"

I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme to resolve
this issue.

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

SAP - Microsoft word link

Similar Messages

Maybe you are looking for