SAP Netweaver ABAP 7.01 Trial  - Error - could not create dir:L:\sapdb

Dear,
I am evaluating SAP....Installing SAP Netweaver ABAP 7.01 Trial. I am getting following error. Please help.
Quote:
> Subprocess starts at 20100720115554
Execute Command : F:\sapdb\programs\pgm\dbmcli.exe -n rajnish -d NSP -u CONTROL,******** db_online
Execute Session Command : exit
> Subprocess stops at 20100720115554
> Subprocess call failed
ERR
-24993,ERR_RTEEXT: Runtime environment error
1,could not create dir:L:\sapdb
3,The system cannot find the path specified.
UnQuote

Hi Mahendra,
Thanks for quick response.
Please find below the log. I tried changing the drive assignment of partition to L, I am getting following log and the installation terminates.
Please help.
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142743
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142743
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142744
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142744
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -R H:\sapdb\NSP\db dbm_version
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
VERSION    = 7.7.07
BUILD      = DBMServer 7.7.07   Build 016-123-231-153
OS         = WIN32
INSTROOT   = H:\sapdb\NSP\db
LOGON      = True
CODE       = UTF8
SWAP       = full
UNICODE    = YES
INSTANCE   = (unknown)
SYSNAME    = Windows Server 2003 family
MASKING    = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = H:\sapdb\data\wrk
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142745
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142745
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142746
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720142746
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142747
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142747
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142748
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720142750
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720142750
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143126
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143127
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143127
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143309
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143309
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish inst_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
7.7.07.16    J:\sdb\programs\MAXDB1
7.7.07.16    H:\sapdb\NSP\db
7.7.06.07    F:\sapdb\NSP\db
> Subprocess starts at 20100720143310
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143310
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143311
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143311
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
> Subprocess starts at 20100720143413
Execute Command : H:\sapdb\programs\pgm\dbmcli.exe -n rajnish db_enum
Execute Session Command : exit
> Subprocess stops at 20100720143413
OK
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     fast     offline
MAXDB1     J:\sdb\programs\MAXDB1                      7.7.07.16     slow     offline
regards.
Rajneesh

Similar Messages

  • Unable to renew the SAP NetWeaver ABAP 7.02 Trial Version license

    Greetings,
    My license for SAP NetWeaver  ABAP  7.02 Trial Version has expired and I was trying to renew the license the other day. I was able to install the new license but, unfortunately, I were not able to delete the old licence not activate the new one.
    I logged on with user: SAP* to install the new license and it was installed successfully. When I do try to delete the old one the system gives this error message: " Only the administrator is allowed to delete licenses. When the valid system license has expired, only the user SAP* can log on to the system. in this case, it would be dangerous to delete a license.
    This is why the user SAP* is never allowed to delete a license."
    Anybody can assist me with the license renewal please ?!
    TIA

    My problem is solved ,, thanx whoever looked at it :).
    the solution was that I downloaded and NSP license key but for an other version of the product.
    Thanx.

  • SAP NetWeaver ABAP 7.02 Trial Version - CPRXRPM

    Hello Experts,
    I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads and as you know it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version?
    Please advice, also have any one done this before?
    Thanks in advance for your time,
    regards,
    K

    Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
    Also have any one done this before?
    regards,
    K

  • Uanble to Download SAP NetWeaver ABAP 7.02 Trial Version

    I tried to download SAP NetWeaver ABAP 7.02 Trial Version but Iam getting a message
    "Unfortunately there was a technical issue completing your download request. Please try again later."
    I tried to download the same again after 8 hours but Iam receiving the same messge not only for ABAP 7.02 Trial Version but for all the SAP Main Releases.
    Please help me resolve the issue!!!

    Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
    Also have any one done this before?
    regards,
    K

  • Error: could not create async IO thread [8](-903)

    Hello,
    we're experiencing problems with the MaxDB backup mechanism(Log and Full-Backup).
    It started last week, when we discovered a full log volume,
    because the autoLog was deactivated by a failed log backup.
    Since then our automatic full_backup script,
    wich runs at 00:25 each night, is not able to do a full backup anymore.
    The error we found in the backup history was:
    Error: could not create async IO thread [8](-903)
    In the diagnosis files the error looks like:
    2009-02-27 00:25:00      0xE88 ERR 18008 TASKING  Could not create thread: 'ASYNCi', rc = 8
    2009-02-27 00:25:00      0x584 ERR 52011 SAVE     devspace: surprising blk cnt:
    2009-02-27 00:25:00      0x584 ERR 52012 SAVE     error occured, basis_err 3700
    2009-02-27 08:58:39      0xE88 ERR 18008 TASKING  Could not create thread: 'ASYNCi', rc = 8
    2009-02-27 08:58:39      0x930 ERR 52039 AUTOSAVE terminated, because of: 3700
    (at 00:25 it's a failed full_backup, at 8:58 a failed autolog backup)
    If the autolog was turned off because of this error,
    it was not possible to do a manual log-backup (stated the same error as in the logs)
    We could "solve" this by restarting the X-server.
    After this a manual log-backup was possible and we could turn on
    autolog again.
    As today, the database was not accessible at all and we had to reboot
    the database server. The kerneldumps of these crashes are in the attachment.
    Additionally, you find some log files there.
    Our environment:
    Windows Server 2003 R2 - SP2
    4GB Ram
    MaxDB 7.5.00.44
    Any help to find out, what's going wrong here and to have a stable backup again would be nice.
    Dominic
    .... how can I upload attachments btw?
    Edited by: Transporeon on Mar 2, 2009 4:36 PM

    Hi there!
    > The error we found in the backup history was:
    > Error: could not create async IO thread [8](-903)
    >
    > In the diagnosis files the error looks like:
    > 2009-02-27 00:25:00      0xE88 ERR 18008 TASKING  Could not create thread: 'ASYNCi', rc = 8
    >
    > We could "solve" this by restarting the X-server.
    > After this a manual log-backup was possible and we could turn on
    > autolog again.
    Basically what you're facing is - like Markus correctly assumed - a shortage of Windows system resources.
    Check the returncode meaning with the xsysrc tool which is delivered with every MaxDB installation on Windows:
    commandline> xsysrc 8
    Errortext for errorcode 8:
    'Not enough storage is available to process this command.'
    This means: Windows cannot process the system call (create a new thread in this case), because of a shortage of internal resources.
    Since the resource management of Windows is not really open that much to outside (as in 'outside of the windows kernel development') analysis, very often you cannot do much about this, but reboot.
    Since MaxDB is dynamically creating the threads when they are needed for backup (and removing them afterwards), the problem itself may not be solved completely.
    Anyhow, there are several steps you can make to make it less likely to happen:
    1. Use the /3GB switch for Windows
    2. Use the "USE_FIBERS" parameter to have MaxDB use lightweight threads (aka FIBERS).
    3. Use the "PREALLOCATE_IOWORKER" parameter to disable the dynamic creation of threads.
    MaxDB will then instead create all thread at instance startup - so backups won't fail anymore due to missing resources for new threads.
    and as usual: use the current version of MaxDB instead that old 7.5 Build 44.
    At least install the current 7.5 patch.
    > Our environment:
    > Windows Server 2003 R2 - SP2
    > 4GB Ram
    > MaxDB 7.5.00.44
    > .... how can I upload attachments btw?
    There is no upload facility in the forums. You still may provide a link to your webspace if you want to provide logfiles.
    regards,
    Lars

  • ERROR Could not create DOM from control.xml

    Hi All,
    I am installaing 4.7EE on Sun Solaris 5.9 SPARC with Oracle and JDK version is 1.4.2_08. When i am running sapinst, sapinst GUI opens and after when i am selecting the Central installtion and i click on Next it giving error message that
    WARNING Could not read file control.xml. Please make sure that you called SAPinst with the correct control file (the control file is given to SAPinst as its first command line parameter or as value of the command line property SAPINST_CONTROL_URL)
    ERROR Could not create DOM from control.xml
    How to solve this error. I have searched in SDN but i am unable to get the solution.
    Mahesh C

    Hi Kiran,
    I have given all permissions to the control file. But these control files are in different places /SAPINST/UNIX/SUNOS_64/PATCOL640/WEBAS630 and ORA, DB2, DB6, IND, INF, ADA in these folders i can c the Control.xml files. But i have given all read write and execute permissions but still its getting the same error. I have downloaded the same IM for 3 times and tried.. But the result is the same.
    Is there any other way of work around for this...
    Thanks
    Mahesh C

  • Why do I get error 'Could not create temporary file. No space left on device" when I use the Engine Installati​on Wizard in TestStand?

    The process gets to the NIVISA\SETUP.INI step, then I get this error.
    I've tried with installing the MDAC and not, and it happens both times.
    The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening.
    Thank you,
    Dave Neumann

    Dave,
    This is documented in the KnowledBase 2D6A63VW titled: "Error: Could Not Create Temporary File, No Space Left on Device".
    As RByrd suggested, you might need to free up some memory space in your System Temp directory, OR you may change the location of your System Temp directory to one with more space (such as the directory where you want the TestStand Engine files to be saved). The Knowledbase shows how to do this step by step. This is its URL:
    http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/46f99e55650d8d5b86256ac00059018e?O​penDocument
    Regards,
    Carlos Leon

  • Can you play this url? (JMF error 'could not create player for')

    Hello,
    I can play this url in Windows Media Player
    http://anon.vht.com.edgesuite.net/dl/deg18-062405-2425.wmv
    However when I try to play it in JMStudio 2.1.1e, I get error "could not create player for deg18-062405-2425.wmv"
    Any help appreciated,
    thanks,
    Anil

    please login and vote for this bug to be fixed - 4 years old!!!
    http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4670412

  • ADF Faces: !-- ERROR: could not create stylesheet for oracle-desktop.xss

    Hi,
    I'm using ADF Faces EA6. Sometimes when I create the EAR, it doesn't include the file "oracle-desktop-ea6-ie-6-windows.css" which muest be present in the "adf/styles/cache" directory. If I check the source code from the browser, it starts like this:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html dir="ltr" lang="es-ES">
    <head><title>Sistema de Seguridad</title><meta name="generator" content="Oracle ADF Faces"><!-- ERROR: could not create stylesheet for oracle-desktop.xss --><script type="text/javascript" src="/fmv/adf/jsLibs/Commonea6.js"></script><script type="text/javascript">_defaultTZ()</script></head>
    Please note the comment: <!-- ERROR: could not create stylesheet for oracle-desktop.xss -->
    Does somebody know the reason?
    TIA,
    Brian

    If everything is set up properly the css will get generated if it doesn't exist. You do not have to be running in the IDE for the css to be correctly generated. Running the app first is generating the css before you deploy, so you've taken away the symptom but not solved the problem. If you try running on another browser, for example, you'll probably run into the same problem.
    Does your ear get unzipped when you deploy? Do you have a writable file system for the css to get written to? There is a known issue with WebLogic where it doesn't expand the EAR.
    Please check to see if there are errors in the logs.

  • Osdm error 'could not create the Java virtual machine.'

    Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
    I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
    could not create the Java virtual machine.
    I'm don't know where to begin to troubleshoot this problem.
    Is there a log,trace,error file somewhere?
    Do I need something specific in my path or an environment variable set?

    Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
    Feedback
    Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
    The Team
    I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
    Now to the problem. - Java virtual machine
    1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
    2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
    If you do not have a JDK, then you can download and install that as described on the download page.
    Troubleshooting
    We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
    Regards
    Sue

  • I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/macBuild/../view/umenu.MacOS.mm.line 1351

    I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351

    I'd search or post here:
    http://www.macosxaudio.com/forums/viewforum.php?f=26

  • Error: Could not create system variants in multiple client system

    Hello ,
    I am trying to make changes to the variant CUS&_FINAL_AT in se38 , but the error message is coming while saving .
    error :Could not create system variants in multiple client system
    Could you please help?

    Hi Huynh,
    Did you ever figure out how to add custom fields to an e-recruit infoset?  I need to so same and would love a heads up on how.
    Leena

  • Error: could not create the java virtual mechine

    Hi,
    I have installed Oracle weblogic server 10.3.5 in my system and when i am trying to install SOA suite 11.1.1.5.0, i am giving path C:\Oracle\Middleware\jdk160_24
    in oracle universal Installer then i am getting a pop-up with the error: could not create the java virtual mechine.
    can any one solve this problem if i have to install any another software for that.
    Thanks in advance.
    Regards,
    Jai

    Hi
    Is this 32 bit or 64 bit. If its 64 Bit, first you install 64 Bit JDK and put in PATH. Make sure when you run java -version, it shows this version. Now download weblogic server Generic Installer (.jar extension). Run this command
    java -D64 -jar weblogicgenericxxxxx.jar (Sometimes -D64 should be -d64. I had seen this on few machines. So try -D64 or -d64).
    Thanks
    Ravi Jegga

  • How can i add FICO module to the SAP Netweaver ABAP 7.02 trial version

    Dear Brothers
    I am a new learner of SAP and interested in learning FICO. As part of that I installed SAP Netweaver ABAP trial version and after the installation I had problem in Logging in but it was solved lately. Now I face an other challenge which I may share with u guys. After logging in I wanna start with a new company code creation for FICO but I cant find the Enterprise Structure for in SAP Reference IMG. Only I see the following structure
    SAP Customizing Implementation Guide
         Activate Business functions
         SAP Net weaver
         Cross-Application Components
         Financial Supply Chain Management
         Integration with Other my Sap.com components
    I expanded the tree structure but could not find the Enterprise Structure> Definition> Financial Accounting--> Define Company
    So is this because of missing FICO module if so how can I install that module for I can learn myself @ home. Kindly help me to fix this prob and hope to hear from the SAP experts around the world.
    W8ng for a reply have a gr8 day a head
    Thnx
    Cherian

    My problem is solved ,, thanx whoever looked at it :).
    the solution was that I downloaded and NSP license key but for an other version of the product.
    Thanx.

  • Error: "Could not create document" on fileshare

    Ladies and Gentleman,
    I integrated a fileshare to our PoC Mobile Documents instance like described in the article
    SAP Mobile Documents - Connecting a File Share as Corporate Repository
    created by Jens Koster.
    The Configuration worked well, and I can see the repository under the "Corporate" tab. I can see the directory structure and the files, and I am able to browse the directory and open the files. As soon as I want to create a directory, or to upload a new file into the repository, I am getting an Error.
    The logs on the Netweaver show me "Could not create document"
    All the settings I did during the configuration look like described in the document of Jens.
    The permissions I set on the file share itself should allow everybody to create documents and directories - I did a successful test on the Windows File explorer.
    Is there anything missing in my configuration?
    Thank you for your help.
    br
    Ernst

    Hi Ernst,
    try to use a CM Repository manager instead of the File System manager. Configure the persistence mode of the cm repository to fsdb and specify a versioning folder. Set the Security Manager to ACLSecurityManager and the ACL Manager cache to ca_rsrc_acl.
    There are some issues when you grant write access to a file system via SAP km. You can read about the impacts here: CM Repository Manager - Knowledge Management - SAP Library in the section FSDB Mode.
    Hope this helps.
    Best Regards,
    Simon

Maybe you are looking for

  • Why SharePoint 2013 have only 2 level global navigation ??

    I just want to know why SharePoint 2013 have 2 levels of global navigation hierarchy by default. Is it possible to make it up to 3,4 levels. For example: Main Site -> Subsite -> Subsite Nodes -> Subsite Nodes Subsite -> Child Nodes & so on Something

  • To Get the list of sales orders for a Business partner in CRM.

    Hi all Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business P

  • Weblogic Server 6.1 trial version fails to install in Linux

    Weblogic Server 6.1 trial version fails to install in Linux (in Linux Redhat 6.2, jdk 1.2.2) 1. When unzipping the *.zip file "weblogic610_generic.zip", the unzip program reported that some files and directories not properly named. (using winzip, qui

  • Execute list of sequence in asynchrono​us

    Hi, I would like to design a simply Test Sequencer that can execute testing on multiple device in asynchronous. I knew that TestStand is the best solution for my task, but due to some constraints I am not able to use it. There are so many way can do

  • Length of Clips

    Hi everyone, Once I trim a clip. How do I make the duration of it longer? When ever I drag on the clip to make it longer, it just restores what I've trimmed instead of making the clip, itself, longer. Also, whenever I import a photo into iMovie, it a