SAP Netweaver trial version installation problem

Dear friends
I tried to install SAP netwaever tial version on my labtop. I followed the instruction excatly as shown in the website www.sdn.sap.com. the first confusing thing I faced that during installation of MS loopback adapter I found that the network adapter I cfreated dose not contain (internet protocol TCP/IP instead I had internet protocol version 4 TCP/IPv4. however I used it and do IP address as specified. then I continue installation and when I finished I didnt find the following in my start up menu Programs u2013> SAP NW 7.01 ABAP Trial Version u2013> NSP. only a SAP Management Console was installed. Now I tried to uninstall SAP netweaver from my system in order to reinstall again, but I couldn't uninstall completely and each time I tried to reinstall the system keep give me waring massage that SAP already installed. even I used the registery clean tool but still facing the problem.
Please help me to completely uninstall all the SAP component from my system in order to installed it again.
Thanks in advance
Edited by: rizik_Hilan on Nov 6, 2010 8:24 PM

Dear Faisal
Thanks for your reply I will use the links yo sent to me in yor reply bt first of all I should uninstall all SAP component from my system. each time I run setup from image folder I always get the following massage " the Wizard has detected an already SAP system NSP on this host. Uninstall first." I need a way to remove the remaining SAP . I uninstall every folder I saw in my harddrive related to SAP and also I used registry clean tool bt still I face the problem
For yor help my friends

Similar Messages

SAP NetWeaver trial version 4.0 extending trial period error

Hello.
I have installed successfully SAP NetWeaver trial version 4.0 After 30 days of trial, it stopped working because of period licensing. I have tried to extend this period installing a NSP.txt file from SAP. A successfull message apears after installing it, but nothing change, the licensing period does not change. And, to do it easier, the user SAP* has not privilegies to liberating my transport order, so I cannot download my work. A nasty experience, doesn't it?.
Does anyone know any solution? Thank you

Yes, I have done it already. There's one tmp license that I cannot delete, and a row with my new license that I have delete, install new one, success message but does not work.
I have tried to install a new period license before ending the previous one... I guess it could have influenced. Nevertheless I will try it again.

Installing Sap Netweaver Trial Version

Hi guys!
I have installed in my notebook a sap netweaver trial version, but I have another PC with less resources than my computer. I would like to know if there is a posibility to have the sap gui in the second PC and use some like a Sap Route in order to get connected this second notebook to sap database of my PC.
I will appreciate any help on this topic.
Thank you very much
Gabriela.

Hi Spantaleoni,
Thank you very much for your reply.
I understood everyting wht you told me
I just need some explanation about this point: Set up GUI Connection in Client PC (setting as ApplicationServer your ServerPC LAN IP)
How Can I set as application server my server pc LAN IP?
Thanks!
Gaby

MaxDB instance error sap netweaver trial version 7.0

I installed sap netweaver trial version 7.0 in e drive which has got 60 GB.netweaver and sap logon front end installed and max db also installed suscessfully
when configuring maxdb database i.e adding new instance the following error appears.
<b>-4 database instance not found</b>

Yes, I have done it already. There's one tmp license that I cannot delete, and a row with my new license that I have delete, install new one, success message but does not work.
I have tried to install a new period license before ending the previous one... I guess it could have influenced. Nevertheless I will try it again.

SAP Netweaver Trial version error at stage 4

Hello,
I tried to install the SAP Netweaver trail version on my system, all the steps I followed are as per instructions. BUt I am getting into this error message, please let me know if someone can help me.
Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
Thanks in Advance, Vish
ERROR      2006-09-11 17:47:44
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR      2006-09-11 17:47:44
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR      2006-09-11 17:47:44 [iaxxgenimp.cpp:653]
           showDialog()
FCO-00011 The step createSystemDirectories with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
INFO       2006-09-11 17:48:18 [iaxxgenimp.cpp:692]
           showDialog()
An error occured and the user decided to rety the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories".

Hi,
I am having the same problem when installing SAP NW 2004s (Database Instance). Did you solve this problem?
ERROR      2006-10-18 10:09:48 [iaxxgenimp.cpp:736]
           showDialog() FCO-00011 The step createSystemDirectories with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
tks.
Daniel Silva

SAP NetWeaver 2004s Java Trial Version installation problem

I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .

Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .

Netweaver 7.0 Trial Version Installation problem

Hi Gurus!
I'm installing the trial version but got stuck when the wizard ask for the DNS Domain Name for SAP System. I don't know what to enter.
Please Help,
Derick

Try the IP address then 127.0.0.0 , perhaps that would help.
regards,
Advait

SAP Netweaver Trial Version under Win 7

Dear Support - Team,
I have a new laptop installed with Win 7 Home Premium 32bit version.
Now i wanted install the trial version from DVD (it was an additional to the book " ABAP Objects in SAP Netweaver).
At first the installer tried to start and needed an addon from MicroSoft and wanted a Reboot of my system,
and then I had to start the setup.exe again.
This was 3 times again.
Now when i try again to install the version 7.0 from dvd, i get the error message:
java.lang.NoClassDefFoundError:run
Exception in the read:"main"
Now i have tried it again and i get the error:
the installer is unable to run in graphical mode. Try running the installer with the console or silent flag.
The graphical mode is 1366 to 768.
What i do wrong?
Do i need the version 7.01 or something else?
Or doesn't run the system under win 7?
I would be very pleased to you, when i get some answers or tipps to solve this problem and i can start my education in programming sap!!
ps.: sorry for my grammar in english. My english isn't very well.
Thank you very much
Edited by: nani2sap on Jan 24, 2010 4:18 PM

Additional to the apply before:
Now i have installed the Java SE Development Kit 1.4.2_19.
But the error exist again.
A friend said, it could be a error in my graphical installation: i have to choice the agp slot for my graphic card.
but this seems to difficult.
In the system requirements doesn't stand something to this point.
At the moment i'm downloading the version 7.01 but it is a long way because i don't have a great bit rate in my dsl.
When you have another idea i would be very pleased.
I am waiting for a fast answer
sincerely greetings

SAP Netweaver 7.02 Installation PROBLEM HELP

Hi,
Have the sapservices in the windows service?
The name should follow SAP.
If so, are they started?
Cheers,
Clébio

Hi there,
I'm also in the process of installing NW 7.02. A few thoughts:
1. What problem warning messages do you get early in the installation process?
2. The German version could be a problem. I also tried at first to instal in Win 7 Pro 64-bit GER (ok it was running with JRE 1.6.x )and gave up. Now I've got a new HDD with a clean new Win 7 Pro SP1 64bit US-EN instal with JRE 1.5_22 and everything is going very smoothly this time.
If everything fails with your Win XP instal and you don't have access to full Windows versions in English you could try downloading an evaluation version of Windows 2008 http://www.microsoft.com/download/en/details.aspx?id=8371
- if your system runs 64bit you can also use the newer 2008 R2 version. They are good for up to 180 days.
Good luck!
Disclaimer: I'm a total noob in SAP Netweaver
Edited by: simon.g on Aug 12, 2011 10:23 PM

SAP Netweaver 7.02 installation problem, "Start Instance" not possible??

Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
Mirso

Here is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM        (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM   (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA   (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 6896
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c   339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM        (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM   (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA   (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W      PpioRecoverLocks, table: 000007FFE04EDB30
W      PpioRecoverLocks, number of file locks 256
W      PpioRecoverLocks: file lock set to: 0000000000000000
W      PpioRecoverLocks: directory lock set to: 0000000000000000
W      PpioRecoverLocks: global lock set to: 0000000000000000
W      PpioRecoverLocks() done
W      PprcRecoverLocks, table: 000007FFE04EE020
W      PprcRecoverLocks: directory lock set to: 0000000000000000
W      PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 7620
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c   339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM        (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM   (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA   (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W      PpioRecoverLocks, table: 000007FFE04EDB30
W      PpioRecoverLocks, number of file locks 256
W      PpioRecoverLocks: file lock set to: 0000000000000000
W      PpioRecoverLocks: directory lock set to: 0000000000000000
W      PpioRecoverLocks: global lock set to: 0000000000000000
W      PpioRecoverLocks() done
W      PprcRecoverLocks, table: 000007FFE04EE020
W      PprcRecoverLocks: directory lock set to: 0000000000000000
W      PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 7828
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c   339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso

SAP Netweaver trial version - ABAP version

Hi Everyone,
In August I had downloaded SAP Netweaver 2004s ABAP edition. It was a 90 day triay version. Due to lot work could not work on it much. Now if I want to work it, its not connecting, because the 90 day trial version has expired.
I wanted to extend the trial version license but while requesting for it, its asking for the hardware key. Can anyone please help me in getting this trial version work somehow.
thanks,
Prashant.

Hi everyone,
I had gotten licence key. I can not export the new license key. The message is like this "The library key has not inialization yet".
And I tried to manual install license , entry expired date and copy paste LKEY="<i>MIIBOgYJKoZIhvcNAQcCoIIBKzCCAScCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQYwggECAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNzA2MTcwOTA4MTBaMCMGCSqGSIb3DQEJBDEWBBShRlTv0agGURSkPkh1POPGKZuAzjAJBgcqhkjOOAQDBC4wLAIUE</i>". but the message "Invalid Key".
How to solve the problem?
Thanks
Efano

Netweaver trial software installation problem.

Hi i am posting this first time so if any mistake in reposting sorry.
i am trying to install NetWeaver 7.10 trial version, on my lap top
Win VISTA, 2 gb memory, 31gb free HardDrive space. i tried to install several times
but no avail.
here is the log file. if any one can help me i would really appreciate it. thank you.
(May 19, 2009 5:57:39 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:39 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:57:49 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:49 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:57:59 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:57:59 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:09 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:09 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:19 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:19 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:29 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(May 19, 2009 5:58:29 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(May 19, 2009 5:58:39 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 19, 2009 5:58:39 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95) at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 19, 2009 5:58:40 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 19, 2009 5:58:40 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source) at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source) at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source) at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

I dont know how to start manyally. SAP<SID>_##.
This is the message file there were many of these this is one of the two files that were .dat
C:\SAP\NSP\DVEBMGS00\work\sapstartsrv
trc file: "sapstartsrv.log", trc level: 0, release: "701"
pid 2480
Fri May 22 11:56:38 2009
SAP HA Trace: Build in SAP Microsoft Cluster library '701, patch 7, changelist 998326' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
Irfan-PC\Irfan is starting SAP System at 2009/05/22 12:14:49
SAP HA Trace: FindClusterResource: OpenCluster failed: 1060 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Irfan-PC\Irfan is sending signal 17 to process 2792

SAP Netweaver trial version from internet

Gurus -
I have finally managed to install the trail version of SAP 7.0 in my home PC running on XP Home
I am only able to access the system from my home network. When I am outside of the network am not able to access it. I think I have to configure some port forwarding stuff in my home wireless router.
Any pointers?
Regards
Sudhakar

Hello,
I have installed SAP NetWeaver AS ABAP 7.02 64-bit Trial system inside a virtual machine on VirtualBox (Microsoft Server 2008 R2 Enterprise). The host machine is in the office and I have access only from office network. When I am outside of the network am not able to access it.
Can I access the system from outside (i.e from home, any other network) the office via Internet?
I attach screenshots - "ipconfig" from host and guest machine.
HOST:
GUEST:
I should mention that, address 192.168.1.101 I have added in file "hosts" located in Windows\System32\drivers\etc on virtual machine.
Regards,
Marcin Czarny

Sap netweaver trial version - ITS \ ICM - website

Hi,
Have a test enviroment running the NetWeaver 7.01 ABAP Trial version.
Is there a way to host an additional website on this server without installing another webserver. For instance could I use ICM, ITS integrated webserver?
This new site has nothing to do with sap, I was just wondering if this could be done, and if so, how. Or can it not be done unless something like IIS or Apache installed for the virtual directories.
Thanks for the clarification and help

Hi,
Thanks for the info, have you got any instructions on how do this? Have you ever tried it?
Thank you for all your help

Illustrator Trial Version Installation Problem

I am installing Illustrator trial version, it stopped at 34% when installing AdobeHelp, the remaining minute keep increasing from 8 minutes to 132 minutes, I have stopped and restart my computer and re-install yet same problem occur again. should I stop or continue?

Dear Rave,
Good day to you!
Thank you for your promptly reply.
I have manage to download CS5 Illustrator instead, and I need to manually
select those files to be installed, that including AdobeHelp, Adobe
Download Assistant, Adobe Air, Adobe Media Player, then the entire
download is completed finally.
I am still keen to install CS6 to try when I have the time to do so, I
hope by then I can solve all problem.
Thanks & Best Regards,
Robin Ong
<Signature with personal contact information removed by Moderator>

SAP Netweaver trial version installation problem

Similar Messages

Maybe you are looking for