SAP - ORACLE 10.2 DB CONNECT WITH TOAD

Dear Friends,
Is possible to use Toad sotware (for accessing tables & write query to get data from table) in SAP Oracle ?
Will it create any log or log file in Oracle or in SAP iteself ?
Kindly, suggest me.
Suppose, if you know any other query software to connect SAP oracle, kindly, get back to me.
Thanks & Regards,
SHIJO K PRAKASH
COCHIN

Hi,
It is not allowed to use 3rd party tools to access the Oracle database if it has been purchased via SAP (if it is not, then you should check the specific licence you have)
this is explained in detail in the SAP note 581312 "Oracle database: licensing restrictions" and in several posts in this forum

Similar Messages

Oracle 11 can not connect with toad

Hello to all,
I just installed oracle 11 on my pc running vista. I can connect to the data base using sqlplus but not with Toad (version 8.6.1). I enter user and password and nothing happens. Not even an error message. I was using previously oracle 10g with toad and never had a problem.
Can anybody tell me how to make toad work with oracle 11?

hi,
thanks for you answer. Since i was experiencing problems, i just rollbacked to version 10g but i'll try your suggestion later.
Thanks again.

Oracle Developer 6.0 connect with po7.2

dear developers,
i have personal oracle 7.2 and developer 6.0 beta i
installed both on same home. after installation i get oracle
net8 easy configuration under oracle for window95 but when i
click on it no action is done.
how can i connect to my po7.2.
best regards,
amit.
null

Oracle Developer Team wrote:
: Amit (guest) wrote:
: : dear sir,
: : i have oracle 8.0.3.0. please can u give me guide line
how
: : can i installed developer 6.0 on in it.
: : best regards,
: : amit.
: : Oracle Developer Team wrote:
: : : Amit (guest) wrote:
: : : : dear developers,
: : : : i have personal oracle 7.2 and developer 6.0
beta i
: : : : installed both on same home. after installation i get
: oracle
: : : : net8 easy configuration under oracle for window95 but
when
: i
: : : : click on it no action is done.
: : : : how can i connect to my po7.2.
: : : : best regards,
: : : : amit.
: : : ==> Developer Release 6.0 Beta is not certified against
: PO7.2,
: : : i.e. you cannot install in the same ORACLE_HOME the two
: : products.
: : : (The production Developer 6.0 won't be easier).
: : : You should use PO7.3.4 or 8.0.5. You can get a trial copy
of
: : : PO8 at http://oraclestore.oracle.com for $5.
: Developer Release 6.0 is only certified in the same
: ORACLE_HOME as 8.0.5 This can be found in the release notes.
Is PO 8.0.5 released yet?
Why does the beta CD come with 8.0.4 ?
(Note: Forms 6 works fine against odbc with other datasource
but please do not force us to use non-oracle datasource !)
null

SAP ECC 6.0 IDES connectivity with internal BI server

Hell All,
We have a connectivity issue for SAP BI with ECC. we have a sap ECC6.0 EHP3 instance running in the customer landscape used for training requirement. In the ECC 6.0 we do also have SAP BI server in the same instance. Now customer want to use the same BI server which is in the same SAP ECC 6.0 IDES without installing an additional instance just for training purpose. As a part of the acitivty we do need to know whether we can configure the BI to R/3 data extraction for this instance. ECC have 800 client and BI also works in the same 800 client. Can we configure the SAP ECC to BI source system configuration and do the R/3 to BW data extraction scenarios. also want to know whether we can do the Process chains and other stuff for training requirements.
Hemanth

Hello colluges/friends,
any suggestions on this?
Hemanth

Discover 3.1, Oracle 8i & form 6i connectivity with 11g.

Dear Gurus,
I want to make some confirmation which are given hereunder.
1. Can I connect Discoverer 3.1 with Oracle 11g?
2. Can I connect forms 6i with Oracle 11g?
3. A dump taken by Oracle 8i client can be import in Oracle 11g using 11g import utility?
Aqeel Nawaz

1) No
2) No
3) Yes
Werner

ORA-01034: ORACLE not available when connect with connect string

Hi,
Database version is- 10.1.0.5.0 on Veritas Cluster, We are able to connect without giving connect string. but when we provide connect string as orcl it gives
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
when we do tnsping it works
$ tnsping orcl
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 08-MAY-2013 15:00:40
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/D01/OIDTEST/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl.test.com)))
OK (0 msec)
tnsnames.ora entry :-
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.test.com)
listener.ora entry:-
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = orcl.test.com)
(ORACLE_HOME = /D01/OID)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cluster_hostname)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
listener log contains
08-MAY-2013 14:47:03 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl.test.com)(CID=(PROGRAM=sqlplus)(HOST=physical_hostname)(USER=oraprod))) * (ADDRESS=(PROTOCOL=tcp)(HOST=xx.yy.zz.xx)(PORT=63969)) * establish * orcl.test.com * 0
08-MAY-2013 14:50:49 * ping * 0
08-MAY-2013 14:51:21 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
WARNING: Subscription for node down event still pending
08-MAY-2013 14:51:33 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=physical_hostname)(USER=oraprod))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168822016)) * status * 0
can you please advice.
Thanks
Edited by: user10702579 on May 8, 2013 11:09 AM

Hi,
lsnrctl services
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 09-MAY-2013 08:26:47
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cluster_hostname.test.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
$
Thanks

Free oracle client with Toad?

Hi,
I have licensed vesion of Toad available. Do I need to purchase oracle client - or is there a free version of oracle client that can work with toad without any cost? My database is Oracle 10.2.0.4 on Solaris 10. I read about instant client but I don't know if that can work with toad and I have no experience on it.
Thanks,
Edited by: orausern on Jun 28, 2011 10:02 AM

Licensing questions should really be directed to whoever deals with Oracle licensing in your organization or to your Oracle Sales rep. The answer may depend on a variety of factors including the country you are in, when you purchased licenses from Oracle, what sort of licensing agreement you have, special stipulations that were negotiated in your licensing agreement, etc. If there is an audit, explaining that you relied on some random guy on the internet with a playing card logo next to his name for legal advice is a career limiting maneuver.
In general, Oracle does not license client machines. The database is licensed either by the number of users allowed to connect (not simultaneous users or Oracle database users but the number of human beings that are allowed to connect to the database via some application) or by the number of processors in the database server. So you generally don't need to license anything to install the Oracle client assuming that you as a human are licensed to connect to the database.
Justin

DB not connecting with SAP

Hi ,
i have a problem on AIX SAP is not able to connect with DB .
Trans.log :
4 ETW000 [dev trc     ,00000]   Out 00: DBSL_DATA_CHAR              (len=2, max=2, dec=0)               23 0.159771
4 ETW000 [dev trc     ,00000] bind_type_and_length(): 0 input variables given                           23 0.159794
4 ETW000 [dev trc     ,00000] bind_type_and_length(): 1 output variables given                          17 0.159811
4 ETW000 [dev trc     ,00000] -->oci_define ( 0: SQLT_CHR, l= 2, con_hdl=0, stmth_p=0x1114e9c88, vp=0x1114cd954,ip=0x1114c5a60,rlp=(nil),rcp=(nil))
4 ETW000                                                                                39 0.159850
4 ETW000 [dev trc     ,00000] -->oci_execute_stmt(con_hdl=0, stmth_p=0x1114e9c88, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000                                                                                30 0.159880
4 ETW000 [dev trc     ,00000]     OCIStmtExecute() failed with -1=OCI_ERROR                             387 0.160267
4 ETW000 [dev trc     ,00000]     SQL error 942:                                                         19 0.160286
4 ETW000 [dev trc     ,00000]     ORA-00942: table or view does not exist
4 ETW000                                                                                26 0.160312
4 ETW000 [dev trc     ,00000] <--oci_execute_stmt(rc=942, rows processed 0, iters-errors = 1-0) [time 0,000s]
4 ETW000                                                                                44 0.160356
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 942                                      16 0.160372
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=942)                                     17 0.160389
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 942                                     51 0.160440
4 ETW000 [dev trc     ,00000]     ORA-00942: table or view does not exist
4 ETW000                                                                                38 0.160478
4 ETW000 [dbntab.c    ,00000] *** ERROR => NTAB: SELECT DBASE FROM XXXXT WHERE TABNAME = 'SVERS' failed, dbsl_rc = 103
4 ETW000                                                                                29 0.160507
4 ETW000 [dbntab      ,01302] ***LOG BZY=>unexpected return code 103        calling NTAB       [dbntab#8 @ 13026]
4 ETW000                                                                                29 0.160536
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
4 ETW000 [dev trc     ,00000] db_con_rollback (con_da={R/3,0,0},th_rollback=1,tx=0)                    270 0.160806

Hi Ratnajit,
i have checked and found the below info :
dbs_ora_schema=SAPSR3
SQL> select username from dba_users;
USERNAME
OPS$ORAE8X
OPS$SAPSERVICEE8X
DBAACT
OPS$E8XADM
SYS
SYSTEM
SAPSR3
OUTLN
ORACLE_OCM
DIP
APPQOSSYS
USERNAME
DBSNMP
12 rows selected.
I think its correct but still the error any suggestions ?
Edited by: Dev S on Jan 6, 2012 1:26 PM

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

Lost connection with db, restarting Weblogic

hi,
we have an server with oracle and whenever the connection
with the db is lost for any reason and then comes again in a while the weblogic needs to be restarted again.
i would love if someone could give me a tip of what excactlly weblogic is "loosing" from the connection or how i may run a script or anything so this to work automatically(mean to startup weblogic again).
thanks anyway for reading my problem.

Hi,
Along with enabling "Test Reserved connections", also ensure refresh connections is enabled. Test Reserved Connections tests the connection only when a client makes a request while refresh connections ensures that all unreserved connections are also tested.
-Jagan

SAP EP 6.0 SP12 Integration with SAP SRM 4.0

Hi Buddys,
When I am trying to create system in SAP EP for the backend SAP SRM Server using SAP Wizard in SAP EP, and testing the connection with test connection option, test is always failing.
In system creation wizard (SAP system for dedicated application server), values for connector, user managemnet have been maintained as mentioned in How to guides for SAP EP and alias for system has been created.
SAP EP has been installed with option to use SAP Backend SRM Server for Users.After SAP EP Installation, all SAP users in back end SAP SRM can be seen in SAP EP.
Software versions:
SAP EP : EP 6.0 SP12
SAP J2EE Engine : J2EE engine 6.4 SP13
O/S : Windows 2003 Server
SAP SRM : SRM 4.0 on SAP WAS 6.4
Your help in this regard is much appreciated.
Regards,
Prasad

Hi Venkat,
When you create a system choose "SAP system using dedicated application server".
The minimum parameters for creating the system are
application host
Logical System Name -
Logon method - UIDPW
SAP System ID
SAP CLIENT
SAP System Number
server port
System NAme
System type - SAP_R3
user mapping type - admin, user
Create an alias, specify the userid and password for the system in Personalization and then do the test for the connection.
Even then if it fails you can go to Sys Admin--> Support --> Sap Application --> SAP Transaction
choose the system, specify the tcode, specify the gui type and hit go. If you execute the transaction code then the connection is OK.
Hope this helps,
Thanks,
Praveen
PS.Dont forget to reward points

Trouble connecting with sqlplus

I installed the "instant client" rpm files...
ORACLE_HOME=/usr/lib/oracle/10.1.0.2/client
tnsnames is located in
/usr/lib/oracle/10.1.0.2/client/tnsnames.ora
and it has the following contents
ibis8i =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ibis.[company_domain_here])(PORT = 1555))
(CONNECT_DATA = (SID = oracle))
when I try connecting with
[user]@ibis8i
Hi, I get the follwoing error
ORA-12154: TNS:could not resolve the connect identifier specified
I can't work out what the problem is :(
This same tnsnames.ora file is used on another machine on the same network and it has no problems at all (ie. the specified identifier does exist).
help would be much appreciated.

I used php4 some years ago with 8.1.7 DB.
In my php login function ORACLE_HOME was configured as
putenv("ORACLE_HOME=/ora/OraHome1");
and it worked (/ora/OraHome1 was my Oracle home).
Now I don't use php anymore, but just trying to help you, I tried to connect to a 9i DB, and got your same error. Maybe 9i and 10g need a newer php version (or oci8 version) .....

IDM connected with GRC

Hi All,
Would like to check a question with you. As I know SAP IDM can be connected with SAP GRC for risk analysis during user request. Does anyone know if there are any other IDM solutions (other than SAP IDM) which can be connected with SAP GRC and do risk analysis during user request?
Thanks in advance.
Benny Ren

Hi Ankur,
Thanks for your reply. As I understand the GRC adapter in ITIM works only with SAP resource (please correct me if I am wrong) and not any other ERP or non-ERP resource. Is there any way so that I can directly use webservices with ITIM without using ITIM adapter.
Hi Frank,
If I can integrate the webservice directly with ITIM, then what I can do is using the risk analysis find out what are the roles which violates the SoD. If web services can return that, then I can use the following steps:
- Create a Life cycle rule to find all the violations.
- Once violations are identified then send an approval for the violations.
- If this are approved, then the role can remain with the person.
- If rejected then the role will be removed through the life cycle it self.
Please let me know if what I think can be done and is feasible.
Thanks to all for your replies.
Regards,
Ashish Choudhary

Install Oracle 10g with Toad 9.1

Hi All,
I am a novice in database(SQL,PLSQL) programming and hence want to learn and practise very deeply in detail for which i want to install Oracle 10g client with Toad 9.1.So need your advise on the process.
(a)Do i need to download entire Oracle Enterprise Edition Installation for Vista? I have read in one of the forums that downloading only the Oracle Client is enough?
Can you please advise me?
(b)I already have the TOAD 9.1 setup with me which i can install.But,i do not know that how will i use TOAD interface and connect to the oracle database.
(c)Also,any sample script/database with some tables that i can use for learning complex SQL query writing would be very helpful.In brief-any project that i can work on in building all the requirements by writing SQL which simulates real time scenarios of SQL development.
Please help me ,i am struggling.
Thanks
Dev

Hi all,
Thanks a lot for all your inputs.Its very useful and presently I am following the steps suggested.
I had another doubt with respect to this.While attending a oracle course,the instructor had told about an installation option of installing oracle 10g on Linux using VMware/virtual -i am sorry i am not sure about it.
So,can you please give your inputs about this process as I dont know about how to setup?
(a)What are the tools that i will need to build a virtual machine in my present computer with Linux as the OS?
And,what are the steps we need to do ?
(b)How do i use a vitual machine if i install it? I mean how will it work?
(c)Then,at last how do i install Oracle with Linux on that?
Please help me with some more inputs
--Dev

Connect Non-SAP Oracle db (32bit) in sql 2005 (64 bit) using linked server

Hi,
I am connecting Oracle 10g database from SQL 2005 using linked server, in which i get the error
"Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "L2ORACLE".
OLE DB provider "MSDAORA" for linked server "L2ORACLE" returned message "Oracle client and networking components
were not found. " (Microsoft SQL Server, Error: 7303)
SAP Server with sql 2005 db is in 64 bit server / Windows 2003
Non-SAP Oracle 10g is in 32 bit windows 2003 server.
i have installed Oracle 64 bit client in the SAP Server and also copied the 64 bit version of dboraslib.dll to the DIR_LIBRARY path. I am able to view the oracle tables in the oracle client.
But, when i create the linked server, it gives the above error.
If i install 32 bit version of Oracle client in the SAP Server, i am able to create the linked server in the db level, but, it says "Work Process restarted, session terminated" message in the Z program in SAP.
The same works in the test environment where both are 32 bit servers. problem is when SAP server is in 64 bit and non sap is in 32 bit.
Please suggest.
Thanks and Regards,
Nagu

"Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "L2ORACLE".
OLE DB provider "MSDAORA" for linked server "L2ORACLE" returned message "Oracle client and networking components
were not found. " (Microsoft SQL Server, Error: 7303)
check the workprocess traces for errors (and/or SM21). It seems that the system is "not aware" that an Oracle client is installed.
64bit programs can´t load 32bit libraries/DLLs that´s why the workprocess dumps when you use the 32bit client.
Markus

SAP - ORACLE 10.2 DB CONNECT WITH TOAD

Similar Messages

Maybe you are looking for