SAP Packaged Product

Hi Folks,
Could you give me a step by step process of creating a packaged product in CRM? I have gone through the reference in http://help.sap.com/saphelp_crm52/helpdata/en/46/57832701a208e7e10000000a114a6b/content.htm
I need to know how exactly to do the following:
Process
1) Create a product in SAP CRM.
2) Assign the product to a category.
3) You have previously assigned one of the following roles to the category in SAP CRM:
a) sales package
b) combined rate plan
c)rate plan
3) You must choose a category to which one of these roles is assigned, otherwise the system cannot treat the product accordingly when running the product configuration, and determining the assignment of products.
4) Assign groups to the product top node.
5) You can determine whether groups are optional or mandatory, and whether they should appear as default or not.
6) Assign products to the group or individually to the package product or product.
I would be very grateful if I am guided in details about steps 4,5 and 6 especially.
Thanks.
Shiladitya De
Moderation: Locked. Rule number one: Try to find the answer first. [See rules of engagement|Welcome and Rules of Engagement;
Edited by: Joaquin Fornas on Oct 28, 2011 4:50 PM

Hi, In order to print COA from warehouse (i.e. Plant Y), ideally an inspection lot should be generated in Plant Y and result recording should be carried out against the same lot. Now the question remains how to record the same results for this lot as those were recorded in Plant X? As suggested by Craig you have to think of developing some custom logic with ABAP which will fetch results from plant X and copy in to Plant Y. I suppose batch number would be the common factor to correlate this with inspection lot of plant X.
But I guess in your case you do not want to carry out RR again in plant Y or rather do not want to generate inspection lot, as this has already been done in Plant X. If so, then you can still print COA from plant Y against the same lot in X (provided the users have authorization). But it will not contain any delivery number or customer name as there is no link at all at this stage. You can develop a new Z table where you can maintain delivery number, customer number and other details with reference to inspection lot. Whenever COA will be physically printed in plant Y for the same lot in X, these details would also be printed along with it!
I would suggest earlier option is more advisable than later!

Similar Messages

Create SAP Packaged Product

Hi Folks,
Could you give me a step by step process of creating a packaged product in CRM? I have gone through the reference in http://help.sap.com/saphelp_crm52/helpdata/en/46/57832701a208e7e10000000a114a6b/content.htm
I need to know how exactly to do the following:
Process
1) Create a product in SAP CRM.
2) Assign the product to a category.
3) You have previously assigned one of the following roles to the category in SAP CRM:
a) sales package
b) combined rate plan
c)rate plan
3) You must choose a category to which one of these roles is assigned, otherwise the system cannot treat the product accordingly when running the product configuration, and determining the assignment of products.
4) Assign groups to the product top node.
5) You can determine whether groups are optional or mandatory, and whether they should appear as default or not.
6) Assign products to the group or individually to the package product or product.
I would be very grateful if I am guided in details about steps 4,5 and 6 especially.
Thanks.
Shiladitya De

Hi.
Maybe, I think that the purpose of style is to use it with SO10.
Therefore, it doesn't use it in SAP script.
SAP script copies with SE71 and changes.

How to get List of all activated Info objects in sap BI production system

Hi Experts,
For my requirement I need list of all activated info objects in sap bi production system.
Can any body suggest any thing.

Hi,
Check in the following table, all the below tables are for InfoObejct related only
RSDIOBJ -
Directory of all InfoObjects
RSDIOBJT------ Texts of InfoObjects
RSDIOBJ------- Directory of all InfoObjects
RSDIOBJT----- Texts of InfoObjects
RSDATRNAV------ Navigation Attributes
RSDATRNAVT----- Navigation Attributes
RSDBCHATR------ Master Data Attributes
RSDCHABAS------- Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA----
Characteristics Catalog
RSDDPA -
Data Package Characteristic
RSDIOBJCMP----
Dependencies of InfoObjects
RSKYF----
Key Figures
RSDTIM----
Time Characteristics
RSDUNI -
Units
Thanks
Reddy

Createing Packaged Product

Hi Folks,
Could you give me a step by step process of creating a packaged product in CRM? I have gone through the reference in http://help.sap.com/saphelp_crm52/helpdata/en/46/57832701a208e7e10000000a114a6b/content.htm
I need to know how exactly to do the following:
Process
1) Create a product in SAP CRM.
2) Assign the product to a category.
3) You have previously assigned one of the following roles to the category in SAP CRM:
a) sales package
b) combined rate plan
c)rate plan
3) You must choose a category to which one of these roles is assigned, otherwise the system cannot treat the product accordingly when running the product configuration, and determining the assignment of products.
4) Assign groups to the product top node.
5) You can determine whether groups are optional or mandatory, and whether they should appear as default or not.
6) Assign products to the group or individually to the package product or product.
I would be very grateful if I am guided in details about steps 4,5 and 6 especially.
Thanks.
Shiladitya De

Hi Sachin,
Following is how my understanding goes. I may be wrong at some places, but this may probably help you in totality.
1. Firstly, the classification should be like:
Material A-- Real Substance as well as R/3 material (with substance-matierial assignment)
Material B--Packaging
Material C---Real Substance
2. You can't assign units to substance header , though you define many tangible properties of the substance in property tree.
3. You define the composition of substance C in property tree. (I presume material C to be of significance as far as recipe / composition is concerned. In case, Material A is of aforesaid importance, then define composition for same)
4. You perform BOM-BOS transfer for integrating recipe composition to the production order BOM.
5. For packaging the end product, you define packaging details in the material master of the "Material A".
Regards,
Pavan

Create Packaged Product

Hi Folks,
Could you give me a step by step process of creating a packaged product in CRM? I have gone through the reference in http://help.sap.com/saphelp_crm52/helpdata/en/46/57832701a208e7e10000000a114a6b/content.htm
I need to know how exactly to do the following:
Process
1) Create a product in SAP CRM.
2) Assign the product to a category.
3) You have previously assigned one of the following roles to the category in SAP CRM:
a) sales package
b) combined rate plan
c)rate plan
3) You must choose a category to which one of these roles is assigned, otherwise the system cannot treat the product accordingly when running the product configuration, and determining the assignment of products.
4) Assign groups to the product top node.
5) You can determine whether groups are optional or mandatory, and whether they should appear as default or not.
6) Assign products to the group or individually to the package product or product.
I would be very grateful if I am guided in details about steps 4,5 and 6 especially.
Thanks.
Shiladitya De

Please see below..
Johannes Utzig wrote on Tue, 06 July 2010 11:21
Hi Erdal,
does your product.ant look similar to the mailapp example?
<target name="create.product">
<property name="destination" location="${sp:destination}"/>
<delete dir="${destination}"></delete>
<makeurl property="repository" file="${sp:repository}"/>
<mkdir dir="${destination}"/>
<echoproperties ></echoproperties>
<echo message="${equinox.launcher.jar}"/>
<echo message="${repository}"/>
<echo message="${destination}"/>
<java jar="${equinox.launcher.jar}" fork="true" failonerror="true"
output="../directorOut.txt">
<arg value="-consoleLog"/>
<arg value="-application"/>
<arg value="org.eclipse.equinox.p2.director"/>
<arg value="-artifactRepository"/>
<arg value="file:${repository}"/>
If so, note this line:
<makeurl property="repository" file="${sp:repository}"/>
And later:
<arg value="file:${repository}"/>
So you will end with something like this:
file:file:/here/goes/your/path
The p2 Director didn't complain about that in 3.5, but does in 3.6.
Just get rid of the extra 'file:' in front of the ${repository}
Hope that helps and best regards,
Johannes
That worked for me -- I had to change it in two places. But can we please get this fixed in SVN so that people can use the example in Helios without having problems?

Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh

SQVI Report for SAP CRM Product Hierarchy and its Product

Hi
How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
or Is there any chance of getting related tables so that I could try more for this requirement.
In which table both product id and its category Id can be found?
Pravin

Thanks DJ
Is there any possibility to get a report for product hierarchy in SQVI ?
say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
Parent category Id->
                                Level2 Category Id->
                                                                 Level 3 Category Id->
Level 4 category Id ->
Product Id's
(I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
Is there any possiblity to achive for generateing a report?

In which screen the Profit Center field can be seen in SAP CRM Product Master?

Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SV

Hi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari

BAPI_PO_CREATE1 SAP Package EHP5 MM/FI DPC integration Dump CONVT_NO_NUMBER

Hi,
we are starting to use SAP Package EHP5 for MM/FI DPC integration and we have the following effect: BAPI BAPI_PO_CREATE1 (same as BAPI_PO_CREATE) creates 2 short dumps while running.
The program stops at the following point:
i = h-group - 1 in SAP-standard code, cause the variable h-group contains no number ("0EY"), so that it is not possible to add "-1" and the program stops with short dump "CONVT_NO_NUMBER".
If I change content of h-group by debugger to "1" at two points of code:
LMEXFU04 line 67 and
LMEXFF01 line 116
the program goes on running and creates the complete purchase order including services and DPC-chain-number.
Sourc Code at this point:
h-group(1) = '1'.
ENDIF.
i = h-group - 1.
Is this short dump caused by wrong SAP MM/FI DPC Customizing ?
Any Experiences ?
Regards K.A.

Atul,
The first thing to check whether you already have them installed - ask your ABAP/Basis Team.
If not, you then need to determine whether they are include in any hot packs that you may be installing in the near future - again ask your ABAP/Basis Team..
Lastly - and probably most difficult - check whether you actually need them..
Also be aware that these notes may require that other notes be installed first (i.e. prerequisite notes).
PeteA

ABAP Proxy Generation -- Objects can be created only in SAP Package

Hi,
I am trying to generate ABAP Proxies. When i create a proxy for an interface(EMP_DETAILS_MI--outbound in my case), and assign it to package(created by developer), a pop comes up saying "Object can only be created in SAP package".
When i try to continue, it asks for an access key for that particular object.
Enter Key for the Object--R3TR-TABL-CO_EMP_DETAILS_MI When i register this object in servicemarketplace( by basis team) and get the license for this. It asks access key for another object R3TR-TABL-EMP_DETAILS_DT.
When i register this object it asks accesskey for
R3TR-TABL-EMP_DETAILS_DT_DETAILS
I fear if there is amy fault in my procedure. kindly let me know. I work on XI3.0 SP5 server.
Regards,
Siva Maranani.

Hi siva,
Iam in the same problem we want to create proxy in SAP namespace. Is there any workaround to create proxy in SAP namespace.
with Regards
shankar

NWDS - Importing standard SAp packages

Hi,
I am new to NWDS java developmennt.
I have succesfully developed, deployed a demo EJB to J2EE and also able to execute it from my SAP portal server.
I am trying to use the user management API ot Portal (like package com.sap.security.api), however when I write the following statement, it gives an error on my local NWDS build.
import com.sap.security.api;
Question is how do I refer to this remote package (or any other SAP package) which is lying on J2EE on my local NWDS software build.
Thanks,
Amit Jain

This is answered. The standard SAP packages are available on local machine.
Right click on project->properties
Selectr Java Build path-> Libraries->Add Variable->Select ECLIPSE_HOME
Hit Extend
Select Plugins
Select com.sap.security_2.0.0
Now the import com.sap.security.api.* statement will not give any syntax errors.
Closing the thread.

SAP PA and SAP II Product Road Map

Hello everyone,
where can I find the latest SAP PA and SAP II product road map, based on the version SAP PA 1.17?
The latest official product road map I found is from Dec. 2013.
Thanks in advance,
BJE

Hello,
The combined roadmap for II and PA is in its final elaboration phase.
We will published it once approved.
Regards,
Didier

In CMOD Wht ever I did , Shuld I need to save in SAP package?

Hi Experts,
pls. one simple doubts that,
When I am trying to do <i><b>FIELD ENHANCEMENT via CMOD->MENU->GO TO->TEXT ENHANCEMENTS->NEW DE cust...???</b></i> its not allowing me to save in Z_MY_SD_PACKAGE, (its prompted me to save in SAP package; mine KATR6 field relavent is BV package)
1 - So, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
thanq.
Message was edited by:
Srikhar

So, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
If you modify the sap standards then you should not give custom(Z) type of package.
Simple example - I have done many things to sales order user exit.
MV45AFZZ Include is the sap standard include,if you modify this include,system will not prompt Package,it asks directly Transport request.
Your case i do not know since i did not your user enhancement.
Srikhar ,
Personal note : Once you get solution,Please give answer,so that other's can use..
Thanks
Seshu

Select SAP's product or another OLAP tool and why?

Hi Experts,
In an effort to validate my opinion of SAP BW/NetWeaver Capability - In terms of flexibility, KPI Development, and Predictive Analytics, If you had to decide, would you select SAP's product or another OLAP tool and why??

Hi,
All data warehouse products provide flexibility and good tools to build strategic reports focus on KPI. All of them also provide easy to use tools to display and organize analytic information..... I guess that the decision about what product will be chosen will be based on how difficult is to pull (and keep updated) the data from the transactional systems behind. In other words, if you are running SAP to manage a big part of your day to day transactional system, go for BW / BI.
In SAP BW / BI, you have a large group of extractors and predefined processes that enable you to pull the data from the SAP systems into multidimensional indexed data providers. Once the data is there, you could easily develop your own queries and reports, organizing them in almost whatever way you want and building almost any possible KPI you want. You cloud display and manipulate these queries and reports using almost any single PC product you want......
Now, if your data sources are not base on SAP , you have to build your own data extractors. You also have to build your own data warehouse targets (data providers) and your own mapping processes. You will be dealing with normalization and database definition concepts. Being technically feasible probably is not the best path.
If you have an hybrid situation (some SAP systems and some NO SAP system), you will evaluate how many strategic data sources you have in each size and take a decision base on that
Regards
Sudheer

SAP PP (Production Planning) Master Data Definitions

SAP PP (Production Planning) Master Data Definitions and Transaction codes.

SAP PP (Production Planning) Master Data Definitions
• Factory Calendar
• Material Master
• Resource • Bills of Material (BOM)
• Production versions
• Master recipe
Factory Calendar: The factory calendar is defined on the basis of a public holiday calendar. The public holiday and factory calendar is a central module in the SAP System. It is assigned to a specific plant during the initial system setup and therefore used in many areas (e.g. in Logistics and in Human Resources) in the system.
Material Master: Material master comprises if all the basic data of the material for each department. The data covers all the relevant information required for the transactional flow e.g. sales, Planning, Production, Quality, Purchasing, Costing etc. Material master covers all the descriptive and control data and the flow of information depends on fields maintained within it. The integration of all material data in a single database object eliminates redundant data storage. Material Masters are created once and can be changed or extended whenever required
Bill of Materials: Bill of Materials or commonly called BOM is a formally structured list of components that make up a product or assembly. The list contains the material number of the component together with the quantity and unit of measure. BOMs are used in their different forms in various situations where a finished product is assembled from several component parts or materials. Resources: Resources are production facilities and persons involved in a production process that have capacities. They are subdivided into categories to specify their suitability for certain purposes or their use in certain processes
Product Versions: A production version determines which alternative BOM is used together with which task list/master recipe to produce a material or create a master production schedule. For one material, we can have several production versions for various validity periods and lot-size ranges. The production version determines the following:
• The BOM alternative for a BOM explosion.
• The task list (master recipe) and any alternate, as needed.
• Lot-size restrictions and validity parameters.
Master Recipes: A master recipe defines the following data that is required for the production of materials without relating to a particular order: processing steps, resources, material components, and control information for the process control level. Master Recipe enables to plan the production of materials (products). Therefore, Master Recipe is used as a template for process orders and run schedules as well as a basis for product costing. In a Recipe
• The Phases (work steps) to be carried out during production.
• The activities to be performed in the operations as a basis for determining dates, capacity requirements and costs.
• The use of materials during production.
• The use of resource.

SAP Packaged Product

Similar Messages

Maybe you are looking for