SAP Patch :'Error reading the standard sequence from the document tables

Hi Experts,
Please help!
Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL' in a RFC. After the patching, the version date of the BAPI ''BAPI_ALM_ORDER_GET_DETAIL' is changed to new date of patching.
Now, when we are calling the customized RFC, ''BAPI_ALM_ORDER_GET_DETAIL' is returning an error 'Error reading the standard sequence from the document tables'.
This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
Please advice whether patching is the reason.
Any advice..is welcomed.
Many Thanks,
Rohit

We found that the flow of the code(RFC) was making a situation where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

Similar Messages

  • Error reading the standard sequence from the document tables

    Hi PM Experts,
    Please help!
    Recently SAP patching is carried out in our R/3 environments. Before patching, all our customized RFCs were working correctly.
    We are using BAPI ''BAPI_ALM_ORDER_GET_DETAIL'  in a RFC.  After the patching, the version date  of  the BAPI ''BAPI_ALM_ORDER_GET_DETAIL'   is changed to new date of patching.
    Now, when we are calling the customized RFC,  ''BAPI_ALM_ORDER_GET_DETAIL'  is returning an error  'Error reading the standard sequence from the document tables'.
    This comes when we are pasiing any order with Order type 'ZM02' ( Maintenance Order - Preventative). It is working absolutely fine with Order Type ZM01(Maintenance Order - In Hours Opex).
    Sometime, when RFC is run individually, it works fine with same data and sometime it is throwing this error with the same data. Very Inconsistent.
    Please advice whether patching is the reason.
    Any advice..is welcomed.
    Many Thanks,
    Rohit
    Edited by: Rohit Kumar on Jan 14, 2009 3:50 PM

    Thanks a lot.
    We found that the flow of the code(RFC) was making a situation  where even correct order id was passed to this BAPI, the result was an error 'Error reading the standard sequence from the document tables'. we reverted the RFC to it's earlier version. now that problem is not there.

  • BAPI_ALM_ORDER_MAINTAIN - Error while reading the standard sequence

    Hi all,
    I am using BAPI_ALM_ORDER_MAINTAIN to add the task list to the order without deleting the existing operations but BAPI_ALM_ORDER_MAINTAIN is giving the error - Error while reading the standard sequence from the document. Please help asap.
    Thanks,
    Ritu

    I Solved this form.
    Table I_N_METHODS
    REFNUMBER   OBJECTTYPE   METHOD      OBJECTKEY
    000001                                    SAVE          000001000069
    000001           OPERATION     CREATE       0000010000690170
    000002           OPERATION     CREATE       0000010000690180
    000003           OPERATION     CREATE       0000010000690190
    000004           OPERATION     CREATE       0000010000690200
    000005           OPERATION     CREATE       0000010000690210
    Edited by: Yonatan Edgardo Diaz on Apr 16, 2010 4:01 PM

  • Keeping the time code from the source material

    Hi - I have a camera that generates TC.  I have it set to free run and the clock so that it records the actual time of the event as it takes place (doing this because it's meetings and such).
    Problem is, when I import this footage (camera is AG-HMC40P by Panasonic) I'm not sure how I can display the footage time code in Premiere.  Premiere just shows the numbers at all 00's as the source code.
    Can someone explain to me what I need to do in Premiere to display the footage with its time code?
    Thanks - Mike W.

    Actually, I may have spoken too soon. Do you have any experience with this filter? I downloaded it and installed it. It works to provide a localized time code, but I still can't figure out how to see the time code from the clip/sequence from the capture file. For example, I have a tape that I play back on my TRV310 and it says September 7, 2009 and gives me the time at the bottom of the on-cam display. However the filter you suggest never seems to pick that up, even if I tell it to use "Source Time Code" as a value for the "Timecodes" property. Any idea how to get that time/date code embedded in the file?
    Thanks.

  • Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

    Hello Experts,
    I follow the flightbooking tutorial to create a Material application to get material list. I  can start the agentry server but when I connect to SAP server and get data, I face below issue
    Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
    I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
    My javaBE
    [HOST]
    server=be1.vdc.csc.com
    APPNAME=ZCH_MATERIALLIST
    [CLIENT_NUM]
    CLIENT=800
    [SYSTEM_NUM]
    SYSNUM=01
    [LOGON_METHOD]
    ; USER_AUTH if standard UID/Password authentication is used
    ; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
    ; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
    ;   (load balancing) is used
    LOGON_METHOD=USER_AUTH
    [GLOBAL_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
    ; uses a pool of connections to the SAP backend all utilizing a single
    ;    UID/password
    UID=
    UPASSWORD=
    SHAREDCONNECTION=0
    GET_PERSONNEL_INFO=
    [SERVICE_LOGON]
    ENABLED=true
    UID=hngu3
    UPASSWORD=xxxxxxx
    UPASSWORDENCODED=false
    [GROUP_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GROUP
    ; individual user authentication using an SAP Message Server which distributes
    ; client connections among a "group" of SAP application servers based on load
    ; balancing criteria
    ; host name or IP address of SAP Message Server
    MESSAGE_SERVER=
    GROUP_NAME=
    SYSTEM_ID=
    CLIENT=
    [LANGUAGE]
    LANG=EN
    [LOGGING]
    Level=4
    [REQUIRED_BAPI_WRAPPER]
    com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
    com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
    com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
    com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
    com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
    com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
    com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
    com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
    com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
    com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
    com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
    com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
    com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
    com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
    com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
    com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
    com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

    Hi Tahir, please help me check the log below
    Agentry Runtime Worker Thread###throwExceptionToClient::begin |
    Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
    Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER),  |
    Agentry Runtime Worker Thread###loggedOut::begin |
    Agentry Runtime Worker Thread###HNGU3: SESSION END |
    Agentry Runtime Worker Thread###BAPI::begin |
    Agentry Runtime Worker Thread###create::nulled repository::created new repository |
    Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
    Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

  • Error 1648-No valid sequence for the set of patches

    Reader XI in up to date Windows 7 Ultimate 64 bit. Auto and manual update returns: Error 1648-No valid sequence for the set of patches
    Try to uninstall returns: Error 1648-No valid sequence for the set of patches
    Uninstalled using cleaner tool, reinstalled Reader XI, same update and uninstall error.
    Ran Microsoft Fix-it uninstall tool. It claimed to have found and fixed corrupt registry entries.
    Tried to install Reader XI...again, Installer said application already installed.
    Removed reader with cleaner tool again.
    Installed Reader XI
    Update and Uninstall errors persist.
    Reader works fine.
    Suggestions?

    Reader tried to update this morning, error 1648....again.
    In case it can help troubleshooting here is the log file generated from the last failed Adobe Reader auto update.
    === Verbose logging started: 12/8/2013  9:27:51  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe ===
    MSI (c) (F8:F4) [09:27:51:051]: Resetting cached policy values
    MSI (c) (F8:F4) [09:27:51:051]: Machine policy value 'Debug' is 0
    MSI (c) (F8:F4) [09:27:51:051]: ******* RunEngine:
               ******* Product: {AC76BA86-7AD7-1033-7B44-AB0000000001}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (F8:F4) [09:27:51:051]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (F8:F4) [09:27:51:051]: Grabbed execution mutex.
    MSI (c) (F8:F4) [09:27:51:061]: Cloaking enabled.
    MSI (c) (F8:F4) [09:27:51:061]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (F8:F4) [09:27:51:061]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:E0) [09:27:51:071]: Running installation inside multi-package transaction {AC76BA86-7AD7-1033-7B44-AB0000000001}
    MSI (s) (9C:E0) [09:27:51:071]: Grabbed execution mutex.
    MSI (s) (9C:CC) [09:27:51:071]: Resetting cached policy values
    MSI (s) (9C:CC) [09:27:51:071]: Machine policy value 'Debug' is 0
    MSI (s) (9C:CC) [09:27:51:071]: ******* RunEngine:
               ******* Product: {AC76BA86-7AD7-1033-7B44-AB0000000001}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (9C:CC) [09:27:51:071]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (9C:CC) [09:27:51:071]: Setting cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:071]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (9C:CC) [09:27:51:081]: End dialog not enabled
    MSI (s) (9C:CC) [09:27:51:082]: Original package ==> C:\Windows\Installer\79e19.msi
    MSI (s) (9C:CC) [09:27:51:082]: Package we're running from ==> C:\Windows\Installer\79e19.msi
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: APPCOMPAT: Uninstall Flags override found.
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: APPCOMPAT: Uninstall VersionNT override found.
    MSI (s) (9C:CC) [09:27:51:087]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:087]: APPCOMPAT: Uninstall ServicePackLevel override found.
    MSI (s) (9C:CC) [09:27:51:088]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-7AD7-1033-7B44-AB0000000001}'.
    MSI (s) (9C:CC) [09:27:51:088]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (9C:CC) [09:27:51:088]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:088]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:088]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:088]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:088]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:094]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:094]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:094]: Opening existing patch 'C:\Windows\Installer\75c76.msp'.
    MSI (s) (9C:CC) [09:27:51:095]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:095]: Using cached product context: machine assigned for product: 68AB67CA7DA73301B744BA0000000010
    MSI (s) (9C:CC) [09:27:51:096]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (c) (F8:44) [09:27:51:071]: Creating MSIHANDLE (43) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:071]: Closing MSIHANDLE (43) of type 790531 for thread 11332
    MSI (s) (9C:CC) [09:27:51:098]: File will have security applied from OpCode.
    MSI (c) (F8:44) [09:27:51:097]: Creating MSIHANDLE (44) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:097]: Closing MSIHANDLE (44) of type 790531 for thread 11332
    MSI (s) (9C:CC) [09:27:51:103]: Original patch ==> C:\ProgramData\Adobe\ARM\Reader_11.0.04\AdbeRdrSecUpd11005.msp
    MSI (s) (9C:CC) [09:27:51:103]: Patch we're running from ==> C:\Windows\Installer\10e2413d.msp
    MSI (s) (9C:CC) [09:27:51:103]: SOFTWARE RESTRICTION POLICY: Verifying patch --> 'C:\ProgramData\Adobe\ARM\Reader_11.0.04\AdbeRdrSecUpd11005.msp' against software restriction policy
    MSI (s) (9C:CC) [09:27:51:103]: SOFTWARE RESTRICTION POLICY: C:\ProgramData\Adobe\ARM\Reader_11.0.04\AdbeRdrSecUpd11005.msp has a digital signature
    MSI (s) (9C:CC) [09:27:51:153]: SOFTWARE RESTRICTION POLICY: C:\ProgramData\Adobe\ARM\Reader_11.0.04\AdbeRdrSecUpd11005.msp is permitted to run at the 'unrestricted' authorization level.
    MSI (s) (9C:CC) [09:27:51:153]: SequencePatches starts. Product code: {AC76BA86-7AD7-1033-7B44-AB0000000001}, Product version: 11.0.00, Upgrade code: {A6EADE66-0000-0000-484E-7E8A45000000}, Product language 1033
    MSI (s) (9C:CC) [09:27:51:153]: Note: 1: 2219
    MSI (s) (9C:CC) [09:27:51:153]: PATCH SEQUENCER ERROR: failed to open summary info from storage for TGT_14ToUPG_14 transform in {AC76BA86-7AD7-0000-2550-7A8C40011004} patch! (1: 2219 )
    MSI (s) (9C:CC) [09:27:51:153]: SequencePatches returns error 1648.
    MSI (c) (F8:44) [09:27:51:103]: Creating MSIHANDLE (45) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:103]: Closing MSIHANDLE (45) of type 790531 for thread 11332
    MSI (s) (9C:CC) [09:27:51:153]: Product: Adobe Reader XI - Update '{AC76BA86-7AD7-0000-2550-7A8C40011005}' could not be installed. Error code 1648. Additional information is available in the log file C:\Users\Bill\AppData\Local\Temp\MSI23ad7.LOG.
    MSI (s) (9C:CC) [09:27:51:153]: Windows Installer installed an update. Product Name: Adobe Reader XI. Product Version: 11.0.00. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Update Name: {AC76BA86-7AD7-0000-2550-7A8C40011005}. Installation success or error status: 1648.
    MSI (s) (9C:CC) [09:27:51:153]: Note: 1: 1708
    MSI (s) (9C:CC) [09:27:51:153]: Product: Adobe Reader XI -- Installation failed.
    MSI (s) (9C:CC) [09:27:51:153]: Windows Installer installed the product. Product Name: Adobe Reader XI. Product Version: 11.0.00. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1648.
    MSI (s) (9C:CC) [09:27:51:153]: Attempting to delete file C:\Windows\Installer\10e2413d.msp
    MSI (s) (9C:CC) [09:27:51:153]: MainEngineThread is returning 1648
    MSI (s) (9C:E0) [09:27:51:153]: No System Restore sequence number for this installation.
    No valid sequence could be found for the set of updates.
    C:\Windows\Installer\79e19.msi
    MSI (c) (F8:44) [09:27:51:153]: Creating MSIHANDLE (46) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:153]: Closing MSIHANDLE (46) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:163]: Creating MSIHANDLE (47) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:163]: Closing MSIHANDLE (47) of type 790531 for thread 11332
    MSI (s) (9C:E0) [09:27:51:153]: User policy value 'DisableRollback' is 0
    MSI (s) (9C:E0) [09:27:51:163]: Machine policy value 'DisableRollback' is 0
    MSI (s) (9C:E0) [09:27:51:163]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:E0) [09:27:51:163]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:E0) [09:27:51:163]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:E0) [09:27:51:163]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (9C:E0) [09:27:51:163]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (9C:E0) [09:27:51:163]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (9C:E0) [09:27:51:163]: Restoring environment variables
    MSI (c) (F8:44) [09:27:51:163]: Creating MSIHANDLE (48) of type 790531 for thread 11332
    MSI (c) (F8:44) [09:27:51:163]: Closing MSIHANDLE (48) of type 790531 for thread 11332
    MSI (c) (F8:F4) [09:27:51:163]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (F8:F4) [09:27:51:163]: MainEngineThread is returning 1648
    === Verbose logging stopped: 12/8/2013  9:27:51 ===

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error when reading the ID of the business system from the SLD

    Hi,
    I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
    The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
    What could have gone wrong. Thanks in advance.
    Srini

    Hi,
    :::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
    1) SAP_XI_Developer_ABAP +
    2) SAP_XI_Developer_J2EE  +
    3) SAP_XI_MONITOR_ABAP   +
    4) SAP_XI_MONITOR_J2EE    +
    5) SAP_SLD_ADMINISTRATOR +
    6) SAP_XI_BPE_MONITOR_ABAP +
    7) SAP_XI_DEMOAPP
    8) SAP_XI_DISPLAY_USER_ABAP +
    9) SAP_XI_DISPLAY_USER_J2EE +
    Regards
    Sesh

  • Error Messages on clicking the previous button from the review of PCR.

    Hi,
    When we fill the PCR form and review it. it works fine.
    Once i click the 'previous' button from the review stage, A pop up window with title - 'Adobe Reader' comes up which says - 'Message limit exceeded <a number> errors not reported'.
    Does this have to do with the Action methods of this button.
    This is common across all forms including the standard forms delivered by SAP.
    Any pointers or duggestions to this will be highly appreciated.
    s/m - NW2004
    reg: ISR Adobe forms
    Kindly help.
    Regards,
    Anto

    Hi Anto,
    i've seen this message too in the ISR scenario on NW2004. It is related to the Active Component Framework (ACF). Please try installing the most recent xACF file. See note 766191 for more info and a link to the file for SP18.
    kind regards,
    Marijn Sponselee

  • RICS0001:Internal Error,unable to process the collected data from the device.

    Hi all,
    I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
    System is CW LMS 2.6
    If I search the web I get the following Cisco document:
    http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
    '...in the log directory look for IC_Server.log.'
    IC_Server.log:
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
    [ Di Nov 16  15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
        at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
        at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
        at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
        at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
        at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
        at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
        at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
        at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
        at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
        at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
        at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
        at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
        at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
        at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
        at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
        at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
    Thanks for your help!
    Alex

    Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

  • Help reading a .txt file from the hard drive....

    Hi guys,
    Ok... I need to know how to read a .txt file from the hard drive... I have an example on how to read from a disk, but I don't have a disk drive. I could be confusing terminology, but I don't think I am. Here is the code I have for reading from a disk.. please let me know how I should change it to read from a hard drive.
    Also, when the error pops up, it says that it can't read another .txt file that is not specified in the code... any ideas how that is occuring? Please advise.
    import java.io.*;
    public class TEST {
    public static void main(String args[]) throws Exception{
    FileReader fr = new FileReader("customer.txt");
    BufferedReader bfr = new BufferedReader (fr);
    String s;
    while ((s=bfr.readLine())!= null){
    System.out.println (s);
    fr.close();
    }

    Ok... I need to know how to read a .txt file from the
    hard drive... I have an example on how to read from a
    disk, but I don't have a disk drive. I could be
    confusing terminology, but I don't think I am. Here
    is the code I have for reading from a disk.. please
    let me know how I should change it to read from a
    hard drive.The code will be the same, regardless of where the file is located. It's just the filename that will be different.
    Also, when the error pops up, it says that it can't
    read another .txt file that is not specified in the
    code... any ideas how that is occuring? Please
    advise.Probably becuase the class file (compiled version of the source code) is a different version to the source code, i.e. the source code hasn't been recompiled since the source code was changed.
    How does this relate to EJBs?

  • Is there a way to pass or access the FileGlobal​s of the main sequence from an ActiveX subsequenc​e that runs in parallel?

    I developed an elborate avionics Test Bench using the data types and FileGlobals to define all of my instruments and signals. The instruments have some minor changes between Test Bench's and the signals change between projects. The actual LabVIEW VI's were written so that they would be generic, in nature, and rely on spreadsheets to determine what inputs and expected outputs are to be tested and use the FileGlobals to determine how to process each signal from this extensive data structure. This methodology has worked well so far. Now I have the need to read some of the signals being output by the black box and compute a signal as input. The black box it very particular about the timing related to how fast this input changes in response to the outputs.
    Anyway, I was able to develop another sub-sequence within the main sequence and have it run as a parallel process. The problem that I have is that this extensive FileGlobals data structure is shown in the sub-sequence, but all of the data is zero or blank. What I really need is the FileGlobal data in the sub-sequence to be equal to the FileGlobals data of the main sequence at the time the ActiveX sequence is started OR have some way to access the main sequence FileGlobals from the ActiveX sub-sequence. I was able to use the when doing a Action of "call method" and a moethod of "NewExecution" to start the sub-sequence. The problem is that the data passed was only the first element in the FilGlobals structure and not the entire FileGlobals.
    I have TestStand version 1.0.3 . I know, the answer is usually to upgrade, but I have my own company and am sub-contracting at this company. It took me a month to convince this company that TestStand was the way to go rather than use the old LabVIEW Test Executive that they still have. The point is that it may be difficult to get them to get a later version and at this point I do not have time to wait for a upgrade. So I need to determine an easy way to impliment this with the existing version of TestStand.
    Any pointers on how you might solve this problem would be appreciated. You can email me directly at [email protected] .
    Thank you for your help!

    William,
    As you alluded, TestStand 2.0 has better solutions to this problem than TestStand 1.0.x. These include
    1) Executing the subsequence on a different thread but under the same execution. The file globals are then common to the calling and called sequence. The improved Sequence Call step type gives you this option.
    2) There is a new sequence file property that provides that "All Executions Share the Same File Globals".
    The reason that the file globals are not shared between your 2 sequences is that they are each executed as separate executions. That is, they are each executed using the NewExecution method. With each new execution a run-time copy of the sequence is made, including the file globals.
    I am assuming that you want to execute the subsequence asynchronously (i.e. in parallel) to the MainSequence and therefore must use the NewExecution method to do so. Since you must use TestStand 1.0.3 then the best option is to pass the file globals to the new execution as sequence parameters. It sounds like you tried this but had difficulties. The steps to do this are:
    A) Create parameters in your called sequence that mirror the file globals that you want to pass from your MainSequence.
    B) Create a new data type that is a container. The subproperties of this container must mirror the parameters in your called sequence. It is important that they are in the same order as the parameters.
    C) Create an instance of this container data type as variable.
    D) Pass this variable as the parameter of the NewExecution method.
    I have attached an example of how to do this. I have 2 file globals that I want passed, Number and String. I have another file global that is an instance of the parameter container that I pass with the NewExecution method (could also have made as local variable). Any time I update the values of the container�s subproperty, the changes are available in the executing "subsequence". Therefore, I must update the value of these container subproperties every time I want to have access to new file global values. There is clearly some redundancy here in that my MainSequence must copy the Number and String values to the container subproperties. If fact, it may be better to simply delete the Number and String file globals and simply use the subproperties of the container directly.
    You probably have to play around with the example to synchronize the change of the file globals with the message popups in the subsequence. In TS 2.0 I would have synchronized them with the new synchronization step types.
    Attachments:
    passfileglobals.seq ‏37 KB

  • The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    Try below steps once
    click Gear icon on the top Right corner and Quit Creative Cloud App
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Make sure to open ~/Library not /Library (  there will be two Library folders )
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Then launch Creative Could and check.

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

Maybe you are looking for

  • Error during creation of Purchase Order for Sub-Contract

    Hi i am creating PO for Sub-contract, to check whether it copied the components or not, when i clicked components in material data tab: it says u201CMRP parameters for plant XXXX have not been maintained. Please guys help me out in this matter. Thank

  • HP Pavillion DV6-1330CA - Internal battery! - HELP!

    Hello everyone: My HP Pavillion DV6 seems to have some sort of battery problem as it says Error -  hp internal battery 601 on boot up! The laptop is just over year old and out of HP warranty! I'd like to know if HP can provide/sell this part to me..

  • User Library Distribution

    Hey, I'd like to create a distribution for a library I've created and there are a couple of things I'd like the installer to do, but I'm not sure exactly how: Add the library to the CVI libraries list Add User defined tokens Also, it's a RT DLL I wan

  • Organizer. not able to turn off "automatic search for missing files"

    Organizer starts searching for missing files. files that i have deleted, and the programme just keep on forever searching for those already deleted files. When i try to turn off that function, the organizer just stops. Running the program on Imac 201

  • Regarding SAP PSS Business package import into NW 2004s Portal

    Hi All,     I am trying to import the SAP PSS business package into the SAP NW 2004s portal. I initially tried the SAP PSS 3.0 package. I copied this downloaded business package zip file into the Drive:/usr/SAP/trans/EPS/IN folder structure. I then w