SAP Query:Error 'List is wider than 255 characters '
Hi all,
i m new in SAP Query.
one query is already done.
one change is come out.
requirement is - Add one extra column
when i m going to add one extra coulumn and test it then message is come out.............
List is wider than 255 characters (generation not possible)
Message no. AQ255
Diagnosis
You attempted to define a query where the line width of the generated list is greater than 255 characters.
You define the line width on the Title, Format screen which permits a maximum width of 255 characters. However, when defining statistics and ranked lists, you can implicitly increase this value, since the lines cannot be broken up. This is the case here. An implicit increase in the width of the list would result in a list wider than 255 characters. For this reason, the query cannot be executed.
Procedure
Check which of the statistics or ranked lists is responsible and modify it so that the resulting list width is no greater than 255 characters.
plz help me and suggest me as soon as possible
hi Shafiq ,
i am aslo facing same problem of (List is wider than 255 characters )
There is limitation of 255 characters .. can we extend that .
When we check by editing program in sq01 it show only 255 character limitation .
Regards
Deepak.
Similar Messages
-
XL email attachment wider than 255 Characters
Hi Everyone,
I'm trying to send an e-mail with an XL attachment which needs to be
wider than the standard 255 characters. I'm using the function module
SO_DOCUMENT_SEND_API1 and am passing it a tab delimited table in it's
objbin parameter. Objbin is only 255 characters wide!
Can anyone show me how to send a wider attachment.
Thanks,
Sanjeev Jainhttps://forums.sdn.sap.com/click.jspa?searchID=21457040&messageID=6721630
jus check this.there are many similar threads.
hope it helps. -
SQ01 Output fields having more than 255 characters
Hello,
I need to show query output more than 255 charaters but system is not allowing
Here is the Error message:
List is wider than 255 characters (generation not possible)
I used SQ01 as t-code to create query.
How can i show my output more than 255 characters
ThanksRefer SAP Note 857823, ALV grid cannot display more than 128 characters per field and will truncate all the characters beyond if it's an ABAP program
From my experience it will not display the field at all in SQ01.
You need to write an abap program and split the field into two fields of length 128 and display side by side.
Work around: If you cannot write abap program uncheck (no display in query) that field in SQ02 and generate it. Execute your query and copy the key field use se16n to input in the key fields and use import to excel sheet function to get the required data. -
SPOOL - how to display output list of more then 255 characters?
Hi,
First of all, I would like to say hi to all of you here, as a new member :)!
I've just discovered this forum - I'm very new and let's say unexperienced in SAP, unlike you :)!
Didn't know where to put my subject (in what folder) so I apologize in advance if I'm mistaken... I work as an ABAP programmer in SAP Core and SAP IS-T and currently I'm worried about this problem:(!
We have these huge reports in IS-T that have to be run in background, because of lot of data. Most of reports are very wide and don't fit in those 255 characters that is SAP standard for spool display. Now I'm dealing with this RFC that has to provide spool display with 800 characters, and this has to be on production by tomorrow:)!!!!!
First I created new format type (ZX_65_800) in transaction SPAD and assigned it to my local printer. I thought this would be enough, but I was wrong. Because when I try to run my programe in background, the system doesn't offer me my format at all :(!
Is there anything else I must do in order to get it.... (I work in Release 620)
If anyone had the same problem, please contact me!
Thanks,
BR,
SanjaHi All,
We have been looking for a solution for what I believe is the same problem, for more than 2 years now. I would just like to verify with you, if your requirement are similar to ours.
Problem:
1. Requirement is to run large HR reports either standard or with Ad Hoc Query in background mode in a company with more than 50,000 employees.
2. Nobody wants printed reports these days. We want to save the forests. Customers prefer to be emailed an Excel file so they can do further data analysis, filtering, pivot tables etc.
3. Reports are running OK in foreground for smaller sections of the organisation, where you send the output to Excel from ALV, or save as a local file in spreadsheet format.
4. But large reports for entire company are awkward, tie up your PCs resources, and complex reports accessing many tables can timeout before completion.
5. So scheduling these reports to run in background would be the ideal solution.
6. However when we access the report output from SP02, we find that most reports (say with more than 13 or so fields) have an output wider than 255 characters and the output of the spool file wraps to the next line in Excel. It is very tricky to then parse the data back into one row for each employee. And you have a problem if you output is for 50,000 or so employees, because then you file is 100,000 rows and will not load completely into Excel limit problem of 65,536 characters.
7. We simply want a spool file that does not wrap the data to the next line after 255 characters.
8. But how to explain this simple requirement to some technical people. It seems a lot of posts on SDN think we always want to print a spool file. NO remember the forests!
Possible Solutions:
I see a lot of posts here that refer to OSS note 186603, but they dont mention the target for the output of the spool is to import into an Excel File (i.e. spreadsheet format). Just search for 186603 or Spool request with more than 255 columns. There is also a reference to OSS note 313566. I am not sure if these will work?
I have also seen the suggestions that you need to define a customer printer format that does not wrap the output after 255 characters (create a new format type in transaction SPAD).
Did you find a solution yet to this problem, do the solutions above work, or can anyone else help us!
John McKee -
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan -
Display more than 255 characters in SAP 4.6c version.
Hi
Can anyone tell me how to display more than 255 characters in the spool log of sap or the application server?
Thanks in advance.
GeetaHi,
You have to have some patch.Pls refer to SAP oss notes 626010.
Pls reward if useful.
Sushil. -
More than 255 characters in background
HI,
My report width is 275 which is displaying when run in front ground. but when run in background it truncates after the 255 characters.
We have created a format using 'SPAD' of width 300, area is showing but the data is not showing after 255.
I have mention line-size 275 in report, i tried this without mentioning line-size but the result is same. it gets truncates after 255, empty area is showing after 255 if we use width 300 format...
ThanksHi,
After creation of the new format, run the job with the new format ie. attach the new format to your printer, and run the job.
Now take the spool number and put it as a parameters to the following program .
Hope it work fine.
Rewards points if useful.
Here is the code:
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with more than 255 columns in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlänge berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS:
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH .
MODAB
PERFORM WRITE_BIGFIELD USING
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN +6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF .
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN .
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM. -
ALV Cell with more than 255 characters.
Hello Guru's,
I need to display a longtext in ALV with other details. I am using READ_TEXT to get the Longtext and appending it to Internal table field, which i have defined as a string. I have debugged the code and it is containing around 450 characters. But, when i am trying to display using "REUSE_ALV_GRID_DISPLAY" it is only displaying 255 characters.
Please suggest a solution.
Thanks,
Sudhir.Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT -
Excel 2007 to Sql server table. Column with more than 255 characters.
Hi there,
I am facing a problem while converting data from Excel 2007 to SQL server 2005 table. I am using BIDS 2005.I have an excel file where one particular column has more than 255 characters. I use OLEDB connection for excel file as there is no driver for Excel
2007 in BIDS2005. I am using Microsoft Office 12.0 Access Database Engine OLE DB Provider for Excel file.
Next, I changed advanced properties for the column to DT_NTEXT. But when I am getting errors on execution. They are:
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
[OLE DB Source [1949]] Error: Failed to retrieve long data for column "action".
[OLE DB Source [1949]] Error: There was an error with output column "action" (2046) on output "OLE DB Source Output" (1959). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [1949]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "action" (2046)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "action"
(2046)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advise on how can I deal with columns having more than 255 characters in Excel file.
Thanks!Here is what your connection string should look like for excel source
Provider
=Microsoft.Jet.OLEDB.4.0;Data
Source=c:\temp\test.xls;Extended
Properties="EXCEL 8.0;HDR=YES";
http://sqlworkday.blogspot.com/ -
Spool output more than 255 characters
Hi ,
i am running a ALV report in background whose output is more than 255 characters . but spool is showing only 255 charcters.
Do we have any setting to change to display all characters.
Or any OSS notes that can be applied.
Thanks & regards,
Sonika AhujaHi,
You need to change the Format Type through SPAD transaction. The Format Type decides the number of rows and columns per page. By creating a new format type as per your requirement would solve the probelm.
Also, in the Report declaration, change the Line-Size to 300 or as per the width of your output.
For further details pls. refer this thread :
Re: Spool List output display > 255 char when the rpt is run in Background
Best regards,
Prashant -
More than 255 characters in a table text field
Dear experts,
i am facing a problem (in WD Alv too) that i can not display more than 255 characters in a single text field.
I want to display a table containing a description field without a limitation of its length. As soon as providing a (formatted) string longer than 255 characters of length, no interactive form is shown on screen.
Debugging a while, the following error message occurs;
ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception - PDF render operation exception, reason code: 0 : InvalidXDPException: Xml parsing error: reference to invalid character number (error code 14) ...
Does anybody have similar problems to mine?
Did anyone resolve the issue to show more than 255 characters in a table in interactive form?
Regards,
Florian Royer
Edited by: Florian Royer on Feb 11, 2010 2:48 PMCALL METHOD lr_service_manager->retrieve
EXPORTING
iv_bo_name = 'cPro_Project' "lv_bo_name "cPro_Project
* iv_bo_name = cl_dpr_api_co=>sc_bo_cprojects "
iv_bo_node_name = 'Longtext.Root' "lv_bo_node_name "Longtext.Root
it_keys = lt_ltext_key
iv_edit_mode = '0' "iv_edit_mode "0
IMPORTING
et_data = lt_longtext_mast
et_failed_keys = lt_ltext_key_fail.
READ TABLE lt_longtext_mast INTO ls_longtext_mast INDEX 1.
MOVE ls_longtext_mast-longtext TO ls_action_item-zz_description.
This is how i get the text with format (line feeds).
zz_description is type string.
My table is on a page, wrapped in a subform. and zz_description is type text field.
Yes, i maintained "allow multiple lines" and did not limit length somehow.
The problem arises in portal, pressing the preview button of a zform. providing a string <255 characters of length, everything works fine.
Edited by: Florian Royer on Feb 11, 2010 3:10 PM -
ABAP Programming to display more than 255 characters in the screen
Hi
I want to display more than 255 characters in the screen after executing a report but i cant able to do that.
Please help me to find out the solution.
Thanks
Mrutyunjaya TrpathyHai tripathy,
when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1.REUSE_ALV_VARIANT_DEFAULT_GET
2.REUSE_ALV_VARIANT_F4
3.REUSE_ALV_VARIANT_EXISTENCE
4.REUSE_ALV_EVENTS_GET
5.REUSE_ALV_COMMENTARY_WRITE
6.REUSE_ALV_FIELDCATALOG_MERGE
7.REUSE_ALV_LIST_DISPLAY
8.REUSE_ALV_GRID_DISPLAY
9.REUSE_ALV_POPUP_TO_SELECT
hope u can try in this way.
REGARDS,
PRABA. -
More than 255 characters required in excel send as attachment in mail.
Hi Experts,
I have a requirement to send displayed list in an ALV report as attachment in excel through mail. I have used FM SO_DOCUMENT_SEND_API1. Now the problem is my excel data in more than 255 characters in a line. It is about 400 characters.But it is taking upto 255 characters in the internal table which is passed to parameter contents_bin . This is because the internal table is of type SOLISTI1. But the excel should hold atleast 400 characters as per my requirement. How to overcome this issue ? Please suggest me...
Regards,
SURYASay your records are exactly 400 length (I am saying 400 for sake of simplifying things, in reality record lengths can be variable and have to be calculated using STRLEN)
You will cut the first record at 255 length and put it in first row. You will put next 145 characters in 2nd row, followed by newline characters (hex 0D and 0A) at positions 146 & 147 (which indicates end of record for excel, so that it puts next record in a new excel row).
The second record will start from 148th character in second row till 255, that is 108 characters and will extend into 3rd row till 400 - 108 = 292th character followed by newline characters (hex 0D and 0A) at postions 293 & 294, followed by contents of 3rd record and so on and so forth.
If you records are of variable length you can also think of always blank padding them to create a record of such a fixed length that always your records are lesser than that and fit into it. This will leave some blank spaces at the end of each record in excel, which may be fine. -
The CSV file on the application server not showing more than 255 characters
Hi All,
We are using SAP 4.6C & the CSV file getting created on the application server has more than 255 characters, all the characters beyond 255 are getting truncated, even while downloading the file the same no. of characters are coming in the file.
Can any one please let me know how can we overcome the problem in SAP 4.6C?Hi Buddy,
You can't display morethan 255 Char. If you see the fun mod you will see the the limit,I also faced the same problem. Probably you start checking by adding fields one by one or you have to reduce the length of some fields in order to display the full data in CSV.
Thanks,
Krishna... -
External table is not accepting more than 255 Characters
Hi,
I'm new to External table.. Somehow External table is not accepting more than 255 Characters even though I'm using VARCHAR2(4000 BYTES).. Can you please help me..
CREATE TABLE DM_CL_ExterTbl_Project
project_name VARCHAR2(80 BYTE),
project_id VARCHAR2(20 BYTE),
work_type VARCHAR2(100 BYTE),
work_description VARCHAR2(4000 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY UTL_FILE_DIR
ACCESS PARAMETERS
records delimited by '#(_@p9#' SKIP 1
logfile 'pp.log'
badfile 'pp1.bad'
fields terminated by ','
OPTIONALLY ENCLOSED BY '"' and '"'LDRTRIM
missing field values are null
REJECT ROWS WITH ALL NULL FIELDS
project_name,
project_id,
work_type,
work_description
LOCATION (UTL_FILE_DIR:'TOG_Data_Extract.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING
Thanks in advance..
~~ManjuI got the asnwer.. In the filed list I have to specify the datatype & it's Size otherwise by default it will take CHAR(255)..
work_type CHAR(4000) solved the problem..!!
Maybe you are looking for
-
I have two email accounts on my iPad. How do I get a signature to show up on the second account?
-
Hi, I need to create an Inbound IDOC using Function modules using an XML file as Input. I am using mySAP ERP 2004(WAS 6.4). IDOC type : HRMD_A05 Message Type : HRMD. I am using the FM's in an ABAP report for testing, reading the data from the XML Fil
-
Link to Same iView in different Roles
Hi guys, I've this UWL iView that has been assigned to Portal Role A and Portal Role B. Thus, there are 2 URLs for it: http://<server>/irj/portal?NavigationTarget=ROLES://portal_content/PortalRoleA/UWL http://<server>/irj/portal?NavigationTarget=ROLE
-
IDVD slideshow: playlist keeps looping first song in preview mode
I created a slideshow in iDVD using photos imported from iPhoto via the "Photos" tab. I then imported a playlist from iTunes via the "Audio" tab. When I preview the slideshow, only the first song plays--it keeps repeating until the end of the slidesh
-
Display system security file fragmentation_percent
Hi - I'm trying to run the MAXL command to display how fragmented my security file is but in the log, I keep getting this error message about 'Syntax error near security'. I am on Essbase 7.0 OK/INFO - 1051034 - Logging in user planning. OK/INFO - 10