SAP Script - Logical expression in multi lines

Hi Friends,
How can I write logical expression in more than one lines in SAP script editor?
Case:
I have to write:
IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND &J_1BPRNFHD-SHPUNT& = ' '
I am writing in first line
/: IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND
and &J_1BPRNFHD-SHPUNT& = ' ' is not coming in the same line. How to write it in more than one line?
What I mean is that:
Can I write like:
/: IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND
/: &J_1BPRNFHD-SHPUNT& = ' '
In fact, above is not working. Please help.
Regards,
Surya
but the rest of the things, that is, &J_1BPRNFHD-SHPUNT& = ' '

I'm not an SAP script expert but this is just a suggestion.
Write 2 seperate conditions.
You can replace this:
IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X' AND &J_1BPRNFHD-SHPUNT& = ' '.
ENDIF.
by this:
IF &J_1BPRNFHD-DIRECT& = '1' AND &J_1BPRNFHD-MANUAL& = 'X'.
IF &J_1BPRNFHD-SHPUNT& = ' '.
ENDIF.
ENDIF.

Similar Messages

Dyanamic table is SAP Script with horizontal and vertical lines

Hi,
I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
I thinking about useing the Box with XPOS and YPOS who value changes dynamicaaly..
But again as the number of pages might be more than one..i think there will issues,
Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
Regards
Senthil

well it is possible but quite tricky.
All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
- calculate those variables during runtime
- add box-statements with those variables.
to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
regards

SAP Script - delete paragraph between two lines or move address one line up

Hi all,
i have a problem concerning SAPscript and formating.
In the address window i have an include, which provides a text in a line. after that i have a command line with address and paragraph, which sorts and formats the address. Problem is that there is a gap between my Text from the Include and the address. Is there a way to move the address one line up or any other way to delete the paragraph there?
SAPscript looks like this:
include ....
endif.
adress paragraph zz
name Testname
street teststreet
Postalcode 98788
City Town
Print Form:
Text from the include
<----
how can I get rid of this empty line?
Testname
teststreet
98788 Town
Any Suggestions?
Thanks,
Denis

Hi there,
no results yet. nothing worked so far. What does PB mean?
The CODE looks as follows:
/: if ....
/: include ........ new-paragraph SA
/: endif
/: if ....... OR ....
/: address Paragraph AS
/: name ......
/: street ......
/: endaddress
Print::
Text blablabla
<---- empty line
Name .....
Street .....
The include has no empty line in the end.
I have no more clues how to delete the empty line in between the address and the include text.
regards,
denis

How to do multi-instrument with EXS instrument in Logic Express

Hello Logic Express Users,
I wonder if someone can help me. I can set up multi-instruments with Battery 2, and Kontakt 2, but I am battling to set up a multi-instrument when I am using the EXS with Logic Express. How do I assign the outputs to different outputs so that I can hear different instruments through different aux channels.
Or is it only possible with the EXS editor that comes with Logic Pro? Because if it is then it is weird why they make the EXS with Logic express a multi-instrument.
Thanks in advance for any help.

If you want to save an instrument patch together with plugins and so on, you should save it as a channel strip.
Use the channel strip menu at the top of the channel object. There is a defined directory for user channel strips, but you can create folders within it and organise your channel strip settings as you like.
These settings will show up in the channel strip menu, and the media browser too.

Long text problem in sap script

Hi Experts,
I have craeted sap script for payment print progrem.. in my sap script one window is text window... client want more then 300 char for that window. for that i use read_text function module... its working fine... but problem is it retrive only one line from long text editor. only 70 char i got.
below is my coding......
CALL FUNCTION 'READ_TEXT'
EXPORTING
    ID                            = '0001'
    LANGUAGE                      = sy-langu
    NAME                          = NAME
    OBJECT                        = 'DOC_ITEM'
TABLES
    LINES                         = LINES          .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT LINES.
n = 0.
l = 132.
text+n(l) = lines-tdline.
n = n + 132.
l = l + 132.
ENDLOOP.
in sap script i have direct pass lines-tdline
*&lines-tdline&
Please suggest me which point i missing?
Thanks
Jigar

Hi All,
The standard text will be stored in Name = ORDCONF_TEXT_(sales org)_(distributionchannel)_(division)
Text ID = ZSD
Examples: ORDCONF_TEXT_4000_01_01 , ORDCONF_TEXT_4000_01_80 , ORDCONF_TEXT_1000_01_01.
Requirement :
The print program /form will need to pick up the appropriate standard text based on the Sales Area (combination of Sales Org / Distribution Center / Division) of the sales order [VBAK-VKORG / VTWEG / SPART], provided a standard text has been created for that Sales Area. Itu2019s not required that every sales area have a standard text, so if one is not found, this step should be skipped and the rest of the print program executed.
The new text should print after 2 blank lines after the Printable Notes text (which is after the line items and the Total Net Price prints).
The font should be the same size as the Printable Notes, but bolded rather than italicized.
The text should print in the same columns as the Printable Notes currently print in (Material Description / Scheduled Ship Date / Quantity) .
So the logic i have used is this below code:
I used a subroutine in the layout of the main window becoz i need to print it in the main window below after 2 blank lines of line items.
This is logic in the layout:
/:PERFORM GET_OBJECT IN PROGRAM ZSDRP001_ORD_CONF_IRE
/:USING &VBDKA-VBELN&
/:CHANGING &ORDCONF_TEXT&
/:ENDFORM
/:INCLUDE &ORDCONF_TEXT& OBJECT TEXT ID ZSD PARAGRAPH A1
I called this subroutine in the print program:
Logic in the print program:
FORM GET_OBJECT TABLES INPUT_TAB STRUCTURE ITCSY
                                             OUTPUT_TAB STRUCTURE ITCSY.
DATA : TMP_VBELN LIKE vbdka-VBELN,
            TMP_VKORG LIKE VBAK-VKORG,
            TMP_VTWEG LIKE VBAK-VTWEG,
           TMP_SPART LIKE VBAK-SPART,
           TMP_TXNAM1(40) TYPE C VALUE 'ORDCONF_TEXT',
           TMP_TXNAM2(100) TYPE C.
DATA: v_text LIKE tline-tdline.
DATA : P_V_TEXT LIKE tline-tdline.
CLEAR : TMP_TXNAM1, TMP_TXNAM2, TMP_VBELN, TMP_VKORG, TMP_VTWEG, TMP_SPART.
READ TABLE INPUT_TAB WITH KEY NAME = 'vbdka-VBELN'.
IF SY-SUBRC = 0.
tmp_vbeln = input_tab-value.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING INPUT = TMP_VBELN
I
MPORTING OUTPUT = TMP_VBELN .
CLEAR VBAK.
SELECT SINGLE VKORG VTWEG SPART INTO (TMP_VKORG, TMP_VTWEG, TMP_SPART)
                                        FROM VBAK WHERE VBELN EQ TMP_VBELN.
IF NOT TMP_VKORG IS INITIAL
AND NOT TMP_VTWEG IS INITIAL
AND NOT TMP_SPART IS INITIAL.
CONCATENATE TMP_TXNAM1 TMP_VKORG tmp_vtweg tmp_spart into TMP_TXNAM2 SEPARATED BY '_'.
endif.
CONDENSE TMP_TXNAM2 NO-GAPS.
PERFORM read_order_text USING TMP_TXNAM2 CHANGING v_text.
READ TABLE output_tab WITH KEY NAME = 'ORDCONF_TEXT'.
IF SY-SUBRC = 0.
output_tab-value = P_V_TEXT.
MODIFY output_tab index sy-tabix.
endif.
endform.
FORM READ_ORDER_TEXT USING P_TMP_TXNAM2 CHANGING P_V_TEXT LIKE tline-tdline.
DATA: ztdid LIKE thead-tdid,
          zlang LIKE thead-tdspras,
          zobj LIKE thead-tdobject,
          zname LIKE thead-tdname.
DATA: tlines TYPE STANDARD TABLE OF tline WITH HEADER LINE
          thead LIKE thead.
CLEAR P_V_TEXT.
ztdid = 'ZSD'.
zlang = 'E'.
zobj = 'TEXT'.
zname = P_TMP_TXNAM2.
CLEAR tlines.
REFRESH tlines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
object = zobj
name = zname
id = ztdid
language = zlang
IMPORTING
header = thead
TABLES
lines = tlines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
LOOP AT tlines WHERE NOT tdline IS INITIAL.
MOVE tlines-tdline TO P_V_TEXT.
ENDLOOP.
ENDFORM.
But still its not getting printed .Plz tell me where i am going wrong.
Thanks,
Suman

In SAP Scripts /, /=, (BLANK)?

Hi Experts,
In SAP Scripts we use,
1) / means LINE FEED,
2) /= mean EXTENDED LINE ,
3) (BLANK) mean CONTINUOUS TEXT.
So, can u explain pls. with an example?
ThanQ.

Hi Srinivas,
Let me share my ideas with you.
/ means LINE FEED: It means suppose if u want blank line betweeen 2 lines then u mention / between those.
e.g A3 &----
     A3 &----
/= mean EXTENDED LINE :
This is for extended lines means suppose u mention one variable in one line and give tabs then ifu mention another varialble then automatically that variable will adjust the next line with this command
e.g. S1 &scsy-datum&,,,,,,,,,,,,,,,,,,,,,,,,,,
        /=      &itab-name1&.
It menas in the output date and name1 will be displayed in the same row.
(BLANK) mean CONTINUOUS TEXT:
    Suppose u r writing the body of the script menas it is cintineous text. automatically it will adjust wiht the blank.
Hope this helps you. reply for queries.
Regards,
Kumar.

Invoice List SAP script - Problem with SAP script functionality

Hello Friends,
I am working on SAP script - Invoice List SD_INVOICE_LIST. The invoice list contains the underlying billing documents. As per the standard functionality, in the line items, its printing the underlying billing documents with the net value. My requirement is to dig these line items into another level, meaning, I need to display the line items of billing documents as well(like material, material description, quantity, net price and net value of that item etc).
The billing linte item informatin is stored in VBRP table and the VBRP structure is not at all defined in the print program of SD_INVOICE_LIST (I.E.RVADIL01). Change of standard SAP program is not an option for me here.
In the external subroutine we can fetch these line items for each billing document in the invoice list. However, my question here is how to take these line items back to the sap script and print them in SAP script (We can print one line item but how to loop these fetched lines and print them on SAP script. Any help in this regard would be greatly appreciated.
I think there is no standard smart form exist for the invoice list. Please also let me know if there is any standard smart form available for INVOICE List.
Thanks in advanace for any help in this regard.
Best regards,
Siva

Hi
As you cannot change the standard, you will have to see if there are any enhancements provided in the print program. if not you have to copy into a custom one and do changes accordingly.
Thanks,
Venkatesh

Sap script creating dynamic box problem

Hi all,
I am unable to create dynamic box in sap script.
Because the printing lines in the main window changing from one customer to another customer.
So could you please guide me how to create a dynamic box in sap script and also how to know the printing line nunber in main window.
Advance thanks for your suggestion
Regards,
Sudhakar.

In script form u can write following code
    /:       DEFINE &MY_XPOS& = ' '
    /:       DEFINE &MY_YPOS& = ' '
    /:       DEFINE &MY_HEIGHT& = ' '
    /:       DEFINE &MY_WIDTH& = ' '
    /:       PERFORM GET_BOX_SIZE IN PROGRAM Z_MY_PROG
    /:       CHANGING &MY_XPOS&
    /:       CHANGING &MY_YPOS&
    /:       CHANGING &MY_HEIGHT&
    /:       CHANGING &MY_WIDTH&
    /:       BOX XPOS '&MY_XPOS' MM YPOS '&MY_YPOS' MM HEIGHT '&MY_HEIGHT' MM WIDTH '&MY_WIDTH' MM INTENSITY 10 FRAME 0 TW
In report u can write following code
Form Get_Box_Size TABLES IN_PAR STRUCTURE ITCSY
                         OUT_PAR STRUCTURE ITCSY.
     Loop at Out_Par.
          Case Out_Par-Name.
               When 'MY_XPOS'.
                     Out_Par-Value = 100.
               When 'MY_YPOS'.
                     Out_Par-Value = 57.
               When 'MY_HEIGHT'.
                     Out_Par-Value = 300.
               When 'MY_WIDTH'.
                     Out_Par-Value = 'Does it matter?'.
          EndCase.
          Modify Out_Par.
     EndLoop.
EndForm.

SAP Script Program Code

Hello,
I want to write a patch of code in SAP SCript which will fetch multiple lines of data(no of lines fetch is unknown). How can I do it? I tried Perform Endperform but it had limit to the varibales it can send back. I don't know the line items(values) it will return.
i cannot modify print program? How can I do it?
Thanks,
Amol..

If you do not want to modify the standard program and achive to display you can use sub-routine calls... firstly, you should identify the element that is displaying the line items and use your sub-routine call inside that element and display all the required fields.
Note: you there is no element which call for line items, I guess there is no other alternative then modifying the driver program.
Regards,
SaiRam

Sap Script multi lines

Dear All
      I want to print two tables data in two columns using sap script .
how to print the data in multiline in a column.
Thanks and Regards
Suresh

Hi,
     This how i used Main window for my requirement, you can modify Margins according to your use.
Window     Meaning                      Left      Upper     Width     Hght
MAIN    00 Main window                    7,00 CH 30,00 LN 70,87 CH   2,00 LN
MAIN    01 Main window                    7,00 CH 32,00 LN 70,87 CH   2,00 LN
MAIN    02 Main window                    7,00 CH 34,00 LN 70,87 CH   2,00 LN
MAIN    03 Main window                    7,00 CH 36,00 LN 70,87 CH   2,00 LN
MAIN    04 Main window                    7,00 CH 38,00 LN 70,87 CH   2,00 LN
MAIN    05 Main window                    7,00 CH 40,00 LN 70,87 CH   2,00 LN
MAIN    06 Main window                    7,00 CH 42,00 LN 70,87 CH   2,00 LN
MAIN    07 Main window                    7,00 CH 44,00 LN 70,87 CH   2,00 LN
ADDRESS    Addressee                     43,31 CH 10,00 LN 35,04 CH   7,80 LN
CONSGNEE   Consignee/ship-to address      7,00 CH 64,00 LN 34,65 CH   4,96 LN
FOOTER     Footer lines                   7,00 CH 58,00 LN 71,00 CH   4,00 LN
HEADER     Header lines/logo            168,00 MM 10,00 MM   2,98 CM   2,00 CM
INFO       General information - right    7,00 CH 11,81 LN 31,50 CH   5,91 LN
Regards
Bala Krishna

SAP Script Check printing Layout, Line Items to display twice in First Page

Hi All,
This requirement is for US check printing Layout.
My Requirement is to display Items twice on the first page.
Eg : Main Window has 10 Items, I need to display all the Items at the bottom in another window at the bottom.
I can't create 2 Main windows in the first page, as the data from the Main window 1 overflows to Main window 2 in the first page.
I copied print program RFFOUS_C into a Z-version and try to implement the logic, however unable to print the line items in the bottom window.
Kindly give your valuable Inputs.
Thanks
Vinayak

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

Send parameter from one script logic to another. SAP BPC 7.5 NW.

Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
       We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY          WHAT=%C_CATEGORY_SET%;             WHERE=<<<;                   USING=<<<;    TOTAL=<<<
*DIM C_ENTITY                 WHAT=%ENTITYSET%;                         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM GROUPS                   WHAT=%GROUPS_SET%;                    WHERE=<<<;                  USING=<<<;     TOTAL=<<<
*DIM RPTCURRENCY         WHAT=%RPTCURRENCY_SET%;         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM TIME                          WHAT=%TIME_SET%;                          WHERE=<<<;                  USING=<<<;     TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PM

Hi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan

SAP-Script - Draw Table (Boxes) with variable number of lines

Hello,
I want to create a Table with Frames in a SAP-Script Form. First of all I don´t know the position of the table in the window main. It can be page 2 or 3 on top or in the middle. But i have to describe a position like
POSITION YORIGIN '12.95' CM. How can i position the table in a variable way?
And i don´t know the number of lines of the table. How can I manage to draw the correct numbers of boxes as numbers of lines exist?
Kind Regards
Carsten Fuchs

Hi carsten,
1. Drawing GRID (just like excel, matrix)
   is very cumbersome in sapscript layout.
(either dynamically, or hardcoded)
2. Moreover, the final look,
   may or maynot appear as requried,.
ie. exactly with proper alignment and grid lines.
3. If the font size is required to change,
then the dynamic position also changes.
4. If the grid is supposed to go to the next page,
again the calculation and logic becomes tougher.
5. To use grid, its better to use smartform,
   which provided FINE CONTROL of the grid
and its lines and width, height, style etc.
6. In sapsctip, at most we can use
   UNDERLINE (_) and PIPE (|)
regards,
amit m.

Unable to print multiple line items in Z-SAP SCRIPT

Hi ALL,
We have a scenario where in we are calling the Driver program (RFKORD50) for Document Extract(F.64), Where in we have attached the Z-Script to the program(RFKORD50),
Unable to print multiple items.
1) Checked with all the elements in STD program for printing multiple items in main window but unable to get all the items we are able to fetch only 1 item .
(&BSEG-BUZEI&,,     &BSEG-SGTXT&,,,,&BSEG-DMBTR&)
2) I have also tried with external subroutine but it also didnot work.it is fetching the latest value.
Ex: if we have 3 items say 1,2,3 first 2 items are not getting fetched it is taking 3rd item and printing it straight away(Problem is it is not going to script for fetching the first item).
see the perform which i have used
/: PERFORM ITEMS IN PROGRAM ZTFI_ZNV20296
/:USING &BSEG-BUKRS&
/:USING &BKPF-BELNR&
/:USING &BSEG-GJAHR&
/:CHANGING &V_BUZEI&
/:CHANGING &V_SGTXT&
/:CHANGING &V_DMBTR&
/: ENDPERFORM
IL &V_BUZEI&,,     &V_SGTXT&,,,,&V_DMBTR&
Please suggest me whetther we can call write_form from external subroutine. or is there any loop commands in SAP SCRIPT Form.
Regards,
Jana

Hi!
The LOOP is always within the printer program. In this case also.
Just check out the RFKORI35 include, the LOOP begins in the 215th line (in 4.6C).
SORT HBSEG BY BUKRS SORTP1 SORTP2 SORTP3 SORTP4 SORTP5
                      BELNR GJAHR BUZEI.
        LOOP AT HBSEG.
*         WHERE BUKRS = SAVE_BUKRS.
          SAVE_BUKRS = HBSEG-BUKRS.
          IF ( HBSEG-KUNNR = SAVE_KUNNR
          AND   NOT SAVE_KUNNR IS INITIAL )
          OR ( HBSEG-LIFNR = SAVE_LIFNR
          AND   NOT SAVE_LIFNR IS INITIAL ).
            CLEAR RF140-ELEMENT.
            RF140-ELEMENT = '521'.
            CALL FUNCTION 'WRITE_FORM'
                     EXPORTING WINDOW    = 'MAIN'
                                ELEMENT   = '521'
                     EXCEPTIONS WINDOW    = 1
                                ELEMENT   = 2.
You might try out to write your code within the 521 elemnt in the sapscript.
Regards
Tamás
Edited by: Tamás Nyisztor on Jun 12, 2008 3:34 PM

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

SAP Script - Logical expression in multi lines

Similar Messages

Maybe you are looking for