SAP SSM 10.1, hardware and server required?

Hi
Please help me, what are the Hardware and Servers requirement for SAP SSM 10.1, can we use SAP BW 7.4 for this or any separate server or add on required??
Please also let me know weather cube builder and pas administration both can be used simultaneously for SSM??
Thanks and Regards
Rahul Sharma

Hello Rahul,
The 10.1 installation guide located on the Service Market Place > Release & Upgrade info > Installation & Upgrade Guides > Analytics > Enterprise Performance Management > Strategy Management > 10.1 lists the requirements. As well there is more information in the Product Availability Matrix, the link to that is in the install guide.
I would also recommend reviewing knowledge base articles 1954589 and 1979183.
As for using PAS and Cube Builder you can have both open but the limitations is that Cube Builder (along with Entry and Approval) use a model in Exclusive mode so you would not be able to work on a model in PAS at the same time you are working on it in cube builder.
Regards,
Graham

Similar Messages

  • Overview of SAP Install Base by Hardware and OS

    Has anyone found, or happens to have a good .ppt or overview of SAP Install Base by OS?  We're running a single instance on Sun Hardware, if we have the need to add additonal capacity, we plan to use RHEL. But overall, I am curious to see small company to large, how is the app tier database tier usage by hardware and OS platforms in terms of use cases.

    Hi Al,
    this is SAP confidential information, which we cannot share. However, most companies that start with Linux use it as application server while leaving the database on the *NIX system. After being comfortable with Linux, they usually more the database as well to harmonise their landscape. But, other customers stick with their *NIX system.
    Actually, the underlying operating system doesn't matter much. It's your IT staff that has to operate it and therefore it's up to them.
    Hannes

  • Minimum hardware and software required to install RAC

    hello friends i am new to RAC and i want to install RAC on 2 nodes and i want to know about the minimum hardware and software like (RAM,HDD,OS,EXTERNAL DRIVES,NIC,SOFTWARE FOR RAC<SOFTWARE FOR CLUSTERWARE<ASM REQUIREMENTS ETC)required to install RAC??
    thanx in advance

    If you choose hardware, you will need a SAN server which is necessary for RAC installation. A SAN server is expensive.
    As you are new, I suppose you just want to see how is a RAC.
    You may try Oracle Virtual Machine which allows you to experience RAC/Linux installation upon a cheaper PC with only 4 Go RAM and 160 Go (Windows XP is suitable).
    You need some experience on how to create cluster storage system (but this is offered by Oracle Virtual Machine or VMWare).
    HTH
    yang

  • Windows 10 WHCK Testing and Server Requirements

    Hi,
    We need to perform the logo tests for one of our drivers. Could you please let us know if we can set up the test server with Windows Server 2012 R2 for the logo tests or we should use only Server 2012 Standard edition?
    Do we need to use WHCK 2.1 for performing the tests? Could you please clarify this urgently?
    Thanks
    Susmitha Gadagottu
    Fujitsu America, Inc.
    California

    Hi Susmitha,
    For Windows 10 driver signing, you have to use Windows 10 only and the kit which is going to support Windows 10. HCK 2.1 is not supporting Windows 10. Point to remember, Whenever new OS comes from MSFT, new kit comes along with it.
    Thanks,
    Mudit

  • SSM 7.0 Hardware spec details

    Hi,
    The 5 page document Hardware and software requirements for SSM 7.0 lists on page 3 that Microsoft Internet Information Services (IIS) 6.x is required under the Application Layer.
    Is this correct and if so what for?
    Or is this just a typo and hang over from the spec for SSM 2007?
    I can't think of anything!
    Colin Cooper

    Hi Colin,
    You must have an old version of a document, because that document isn't one of the official documents on the service marketplace, and there is certainly no requirement for IIS in the SSM 7.0 architecture.  NetWeaver CE provides the web server and Java Application Server needs for Strategy Management.
    Thanks and regards,
    Robert

  • Remote Desktop Services - VDI / Hardware and Software requiremnts

    I am going to plan to do POC for 50 user on customer end for Microsoft VDI installation. For this i required hardware and software requirement.

    Hi Pratik,
    Thank you for posting in Windows Server Forum.
    It all depends on how you want to configure your VDI environment. In Server 2012\R2 there are 2 flavors: Pooled & Personal and further can deploy both that as Managed\UnManaged deployment. You can check following article for further details.
    RDS Hardware Sizing and Capacity Planning Guidance
    http://blogs.technet.com/b/iftekhar/archive/2010/02/10/rds-hardware-sizing-and-capacity-planning-guidance.aspx
    Choose a VDI Deployment Scenario
    http://technet.microsoft.com/en-us/library/dn645525.aspx
    Deploying VDI for RDS 2012 / 2012R2 – Part I
    http://thewolfblog.com/2014/03/26/deploying-vdi-for-rds-2012-2012r2-part-i/
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • What hardware and software is needed to use share point 2010

    Please if enyone could help!
    I want to become familiar with the advantages of using excel for example simultaneusly with other users, shere point does it best for us yes???  What do I need to install or what hardware is needed to do that?
    Thanks,

    Here are the hardware and software requirements for SharePoint
    http://technet.microsoft.com/en-us/library/cc262485(v=office.14).aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Minimum Hardware&software system requirements for installing sharepoint?

    Hi,
    I am planing to learn SharePoint,
    That's why,anybody tell me minimum Minimum Hardware&software system requirements for installing sharepoint?
    And also tell me for learning share point for beginners Sites or any materials or PDF's etc......

    Hardware and software requirements (SharePoint Server 2010)
    Plan browser support (SharePoint Server 2010)
    Here's the primary set of
    implementation documentation for SharePoint Server 2010. From there check out Getting Started, Planning and Architecture, Deployment, Operations, and Troubleshooting.
    There are a number of training resources out there (too many to list here) if you are looking for both IT Professional or Developer training. 
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Groupware conenctor Hardware and Software Installation

    Hi,
    We need to install groupware connector for QA and Production systems. Client wanted to install for both the systems on one Common groupware conenctorm server.
    What is the hardware and software requirement ? and what are the additional privilages required for to install this connector.
    Thanks,
    Kristene

    Please find the GW Connector HW and SW requirements.
    Hardware requirements actually depend on the number of users on the Groupware Server and the amount of changes to be replicated.
    The operational minimum requirements are
    <b>Component                 Description
    Processor                                 Intel PIII 600 MHz or higher
    Minimum RAM                 256 MB
    Minimum Disk Space                 100 MB
    Display Mode                  640x480x16 or better</b>
    Result of performance testing shows that following hardware is required to serve 1000 to 1500 users
    <b>Component                  Description
    Processor                                  Intel P4 2 GHz
    Minimum RAM                  512 MB
    Minimum Disk Space                 100 MB
    Display Mode                  640x480x16 or better</b>
    Performance of the connector scales linearly – one box with 4 * Intel P4 2 GHz and 2G of memory will be able to serve about 5000 to 6000 users.
    Note: all performance estimations are relevant to Groupware Connectors operating in Local Area Network environment.
    Note: Groupware Connector may share the same box with relevant Groupware Server in case if the box has some performance and memory reserve. Use numbers above to check if there is enough free resources for amount of users to be served.
    Regards,
    Pradeep

  • Hardware Requirements for the SAP SSM (pilot works) installation

    Hi All,
    Can any one please provide me with the information on hardware requirements for the SAP SSM (pilot works) installation.
    Thanks in advance.
    Anjum.

    I'm think if you can install Windows then enough RAM and Processor you have ....
    In any case "the more the better" .
    Regards.

  • What are the minimum hardware Server requirement for SAP BI BO

    I would be thankful if someone can please tell me  What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
    In the Desktop
    I have 8 GB RAM
    2.60 Ghz Processor ( CPU)
    System type: 64 bit OS
    regards
    ranendra

    Hi,
    Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
    I haven't try with your similar specification but  in the below link some one tried with similiar one.
    What are the minimum system requirements to install SAP BO 4.0/4.1
    Amit

  • Installing SAP GRC AC 5.3 and 5.2 in same windows server

    Hi All,
    Is it possible to run both SAP GRC AC 5.3 and 5.2 on the same server? Basically for testing purpose prior to upgrade?
    What would be the technical issues?
    Regards,
    Nagendran

    Hi All,
    We have a similar requirement:
    We have WAS640AC5.2 running in a windows server connecing to backend landscape "A". We plan to install WAS700AC5.3 in this same server for backend landscape "B".
    What i would like to know is WAS640AC5.2 & WAS700AC5.3 can exist together in the same server?
    Regards,
    Muruga

  • Practical requirment of hardware and software to run small scale industry

    Suppose any small scale industry or any chemical plant want to use SAP then what is the requirment of hardware and how much he/she needs to pay to purchase SAP software.
    Assume that 5 to 10 workers are working in the industry on Rs.1000 to Rs.3000 as salary and his net profit is approximatly Rs.40000 per month.
    waiting for reply.

    It's depends on, such as, what country are you talking about?
    You can find the documentation about the hardware requirements in the link below
    https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000680297&_SCENARIO=01100035870000000183&_ADDINC=011000358700002837782005E&
    or you can looking for "B1 2005 A SP01 Sizing Guide" in SAP B1 portal.
    Regards,

  • Upcoming webinar in the Lumira series is on April 23rd: SAP Lumira Cloud and Server

    Hello Everyone,
    Join us tomorrow for a very exciting webinar on Lumira Cloud and Server. We have covered all individual pieces of Lumira Desktop and Cloud for you.
    Please click here for recordings: Lumira Events Calendar
    We will now bring it all together with the focus on the Lumira product suite and how they work together. During this webinar, you’ll learn:
    1. What is SAP Lumira Server, how it works, and what you need to deploy it
    2. Why it’s user experience and capabilities are similar to SAP Lumira Cloud
    3. How Lumira Server integrates into existing HANA and BI4 landscapes
    Although not a pre-requisite, we highly recommend you to view the Introduction to Lumira Cloud webinar that covers an end-to-end scenario from desktop to server.
    Click here to register.
    See you there!

    The recordings will be posted on the Lumira Webinar Calendar after the event has completed. Ruchi usually gets the recordings posted within approximately 3 days.
    We hope you enjoy the session when you get a chance to view it.
    Lumira Expert Team
    ^ca

  • How to check server hardware and OS issue without offline DB server

    Hi Experts,
    For checking hardware issue, do we have any way to check server hardware and OS performance without offline server?
    any way we could rule out bad hardware causing the problem without offline server?
    Thanks
    Jim

    I think your answer depends on the nature of the hardware issue you think you may be having, whose hardware you have, and the OS your are running on that hardware. Such as on UNIX there are several error logs that record errors related to the system including detected hardware issues and you have numerous utilities like vmstat and iostat that can be used to measure performance. Some disk units linclude their own diagnostics modules you can run.
    If you really want help I think you have to be a lot more specific about the problem you are facing.
    HTH -- Mark D Powell --

Maybe you are looking for

  • [Solved] A Challenge: Loop meld to update *.pacnew files

    I got no secret, I love meld .  Does a great job of showing differences alot of times if even scattered all over the page, allows for copy and paste...  vimdiff is good but requires a much more keypresses, copy and paste isn't as elegant, and with my

  • QuickTime on Windows Server 2003

    What version of QuickTime will work on Windows Server 2003, if any? I had issues a year ago with version 7, and I'm going through my list of apps to upgrade. None of the application pages state that Windows 2003 is a supported OS for version 7.1.6. D

  • Can OAS 4.0.8.2 run on Win2000 Server?

    Hello, I have tried to install the OAS 4.0.8.2 on Win2000 Server. So far, the installation is OK. The node manager can start, but the host name and domain name have some problems. So that, the OAS manager cannot manage the OAS successfully. And, if I

  • Webi scaner

    Hello guys I had developed very powerfull report scanner with native interface on VB7. Scanner take all reports information and most important take SQL queries of reports (free hand SQL and Univerces). This is very userfull for us and now we can make

  • Help with a script - How to identifiy name of Admin Groups

    Hello, I have this script below. Someone can help me and explain me how to add a way to dynamically fill the name of Administrators group depending of the computer (for some computers it's "Administrateurs", for others "Administrators", etc... (cf li