SAP Upgrade : No Framework Program For Include

Hi,
I am getting the Syntax error as mentioned while upgrading
system from 4.6C to ECC 6.0
Please provide some solution.
Regards;
Parag

Hi
Could you be more clear about the problem which you are facing in Upgrade.
Regards
Lakshmikanth

Similar Messages

No main program for include..

hi,
i have created an include and when i do a syntax check, i get the message, "there is no main program for this include". what does that mean ? how to overcome this issue ?
only when this is resolved further statements can be checked.
thks

only executable program can be sintax checked.
to check this include.
include it in other report program and check it.
go to se38
create report.
reprot z_test.
include <name>.
no check the sintax.
go through
http://help.sap.com/saphelp_47x200/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
Edited by: S.r.v.r.Kumar on Jun 18, 2008 8:11 PM

SCC4 - Protection against SAP upgrade

Hello guys,
i have a question regarding to the "Protection against SAP upgrade" flag in SCC4 for the client settings.
I know that this flag will make a client unusable in case of an upgrade (for example from ERP2004 to ERP2005), but what is about applying support packages?
Is this flag also valid for support packages?
The documentation about this parameter does not make a statement to this point:
> If this flag is set, the client is no longer supplied with data during SAP upgrades. After an SAP upgrade, it is not possible to work actively in the client. The flag can only be set for a test client or an SAP reference client (Early Watch).
Does SAP understand "applying support packages" as an upgrade?
Answers will be rewarded.
Regards
Stefan

No.
Applying SP is not SAP upgrade.
-Pinkle

Error : No framework program was found for include

Hi All,
A web UI enhancement worked perfectly fine in a development system. However, after transporting it to a quality system, it did not work as expected. All transports were error free and all the developed items could be seen in the quality system.
When trying to keep a breakpoint in the redefined method of a controller class, I get the error "No framework program was found for include <> "; where <> is the z implementation class that was created.
Any suggestions/ideas on how to resolve this error?

Hi,
Check the entries in sm30 bspwdv_ehset_asg if the enhacement is assigned to client in Q system..
Hope this helps..
Cheers,
Sumit Mittal

Driver program for the Dunning letter SAP Script

Hello All,
Can someone please tell me how to find the "Driver program for the Dunning letter SAP Script". I checked the Transaction OB96 but I dont find any Dunning scripts here i.e., the standard Dunning letter SAP Script F150_DUNN_01.
Is there any Transaction like NACE of logistics for FI module to find the Driver programs. My requirement is to find the Driver program for the Dunning letter SAP Script and have a new Driver program instead of the standard SAP given driver program. Example is in transaction NACE we can change the driver program for Invoice like from RVADIN01 to ZRVADIN01.
Thanks and Regards,
SNK.

Yes you can, using FIBF, change the FM associated with event 1720 like when SapScript is replaced with SmartForms. Look at [Define Dunning Forms (with SAP Smart Forms)|http://help.sap.com/saphelp_46c/helpdata/es/7d/c7a0a535e1d311ba4d0800060d888b/content.htm] for reference.
But notice
- PRINT_DUNNING_NOTICE call many FM of the same FG which share the same global data area.
- During following upgrades of your system you will have to manage a copy of standard.
Regards,
Raymond

Purpose of RSTXTRAN program for SAP-Script ?? ??

Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?

Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha

Program name zxvau02 are reserved for includes of exit function group

i am facing a problem during user exit.
when i am trying to change the code in function module (va01) in include zxvvau02
an error is occurred 'program name zxvau02 are reserved for includes of exit function group'
so i could not edit the include program.

Hi,
1. Find the appropriate Enhancement.
2. Enter the ABAP code in the "Z" program within the function module.
3. Create a project.
4. Add the Enhancement to the project.
5. Activate the project.
At the step (2), when I double click on the Include ZX* within source code of the function module to realize the exit, the
system would prompt to create the include. But NO, it always prompt that the name of include is reserved by SAP and I
cannot create it... I entered an access key for the object ...

Standard program for creating outbound IDoc including wbs + cost planning

Hello,
a)
Before we start developing our own ABAP, I would like to ask the forum if somebody knows if there is already a standard ABAP program for generating outbound IDocs including wbs-element data (CJ20N; wbs ID, description) plus annual data from the cost planning (CJ41; such as fiscal year and costing items from unit costing; quantity, unit, price per unit, total price, description of item) ?
b) we are planning to use the logical message /ISDFPS/PS, basic type /ISDFPS/PS01 and enhance this IDoc with segments for the costing items from the cost planning.
Question: Do you know if there is a standard IDoc which has segments for both wbs-element data and costing items?
Kind regards
Viveka Schwartz

Hi Frank,
Did u check this Link on the PP confirmaitos[LINK|http://help.sap.com/saphelp_47x200/helpdata/en/12/3bbc1c504811d182c20000e829fbfe/frameset.htm]
Reg
Dsk
Edited by: DSk on Sep 14, 2010 3:44 PM

Going live check for SAP upgrade projects

Hello,
I am interested in "going live check" service and procedures for my upgrade projects. May I find any documentation? Do I have to pay for it?..
Thanking you in advance and a happy new years!
Kind regards
Nilüfer Çalışkan

Hi Nilufer,
The following Input as follows :
Source : http://www.thespot4sap.com/upgrade_guide_v2.pdf
This service is included as part of your annual maintenance fee.
The underlying concept of the SAP GoingLive Functional Upgrade Check is
to ensure smooth operation of your mySAP.com solution by taking action
proactively, before severe technical problems occur.
The GoingLive Functional Upgrade Check is made up of three sessions
(Planning, Analysis and Verification)two sessions (Planning and Analysis)
before the upgrade and the other (Verification) after the upgrade.
Planning Session: This session should be performed as much in advance as
possible when the upgrade is first being considered.
Analyses compatibility for the target release with regards to connected
systems in the Solution Landscape, OS version, DB version, installed Add-
Ons, Plug-ins, Country Versions, and so on.
Analysis Session: It is generally performed two months before the
production upgrade (consider lead time for hardware procurement).
The focus is on resource planning and system configuration.
There is a high-level hardware plausibility check (this is not a hardware
sizing exercise).
Potential resource bottlenecks are identified.
Necessary changes will be recommended to prepare the system for the
productive use of the new release.
38 SAP Upgrade Guide | Simplifying Your Upgrade
Verification Session: Generally performed four to six weeks after the
production upgrade, and the recommendation from the analysis session
implemented.
Comparison of performance with results prior to upgrade
Recommendations on configuration and optimization
More information and ordering . For more information, see the GoingLive
Functional Upgrade Check web page at:
http://service.sap.com/goinglive-fu
To order a GoingLive Functional Upgrade Check, contact SAP Customer Care
Center at least eight weeks prior to the planned upgrade of your production
system.
For customers of value-added resellers (VARs) such as CBS customers in the
US, special conditions apply. Contact your VAR.
Remote Upgrade Service
Remote Upgrade Service is a technical upgrade that is performed by SAP
remote consultants. Pricing is based on the complexity of the customers
environment.
SAP performs the technical upgrade of your system, allowing you to focus on
the functional and training side of the upgrade. You are still responsible for
resolving object conflicts.
See SAP Notes 106447 and 84044.
The Remote Upgrade Service is an attractive option for CBS sized customers
with small or non-existent mySAP Technology group.
For more information see the Remote Upgrade Service web page at:
http://service.sap.com/remoteupgrade
Resources
The following list shows some of the resources you can use as you prepare for
your upgrade of SAP. These resources include:
Your installation partner
Customers and others you have networked with at customer functions and
conferences such as:
ASUG
Hope this Info helps you.
Advanced New Year wishes.
Br,
Sri
Award points for helpful answers

Regarding the nomenclature for include files in SAP

Hi Group,
I am presently enhancing a tool for the upgrade thing .The tool is used to derive all the effected objects,so, for that i need to know the nomenclature for include files in SAP.e,g all the include files for table maintenance generator starts with LSVIM.so, we don't need to analyse that include files,so in the similar fashion i need to know nomenclature for include files....
Thanks,
Ajitabh Aggarwal

Hi Group,
Basically i am working on developing an upgrade tool from 4.6/4.7 to Ecc 5.0/6.0,so for that i need certain information on include files.Basically i need to collect the affected zobjects whic i need to modify,So,for that i need to get the FUGR,FMs and includes which need to be corrected.e.g all deque and enque function modules are irrerelevant and similary includes starting with LSVIM and those that don't have function odules attached to them are for screen maintenance of tables.So, i need certain on inputs on that end.if u have anything,please do tell me.
Thanks in Advance.
Ajitabh Aggarwal

Growing an SAP Alliance Program to Include More Faculty/Products/Courses

Growing the Program to Include More Faculty/Products/Courses. This topic was a round table discussion at the 2010 SAP Congress in San Diego.
Leader: Frank Anderau2014Central Michigan University
       Richard Vawteru2014University of Southern California
       Vivek Choudhuryu2014University of Cincinnati
       James Leeu2014Brigham Young University-Hawaii
       Christine Alexanderu2014Texas A & M University
       Chaiho Kimu2014Santa Clara University
Ideas on how to address: Growing the Program to include more Faculty/Products/Courses
1.   Try to roll out a new class every other year inspired by UA summer workshopu2014at least one faculty to buy into     the new course.
2.   Use of the simulation activities in a class promotes to students that SAP is fun.
3.   Faculty Incentives:    Release time, money, and student help support.
4.   Marketing program to business and industry, ASUG, encouraging recruitment of our undergraduate and graduate students.
5.   Keeping the WHY do I want to do this out in front of the faculty: materials are available at the UAC and are easily accessible, testimonials from those who hire our graduates that SAP knowledge is worth it, etc.
6.   Convince faculty to buy in, and subsequently, convince students to buy in. If this is successful, so will go the alliance program at your school.

Dear Colleagues
Thank you to all of you who made this breakout session at the 2010 SAP Curriculum Congress in San Diego such a success last month. Your commitment to excellence and University Alliances is greatly appreciated.
For those of you UAP member professors who did not attend this year, please talk to your colleagues who did attend and make your plans now to attend next year.
Best Wishes
Bob

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Does SAP Provide any standard conversion program for Batch Managment activa

Hi,
An idea if SAP Provides any standard program to conversion of non batch managed material to batch managed material in a productive SAP Environment and close open documents,
It would be great help if somebody can reply to these queries.
Thanks in advance
Regards
Bijaya Pradhan

Hi
Use the same Driver program RIPROV00 which is used as Script driver program to fire the output from smartforms also
Only thing is little bit you have to modify the program such that it triggers the smartform instead of Script.
I think there is no smartform driver program for this IW21.
see some standard SF driver program like RLE_DELNOTE and
modify it and use it.
Reward points for useful Answers
Regards
Anji

Problem in creating include program for customer exit for BC425_01

Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKS

Hi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

SAP Upgrade : No Framework Program For Include

Similar Messages

Maybe you are looking for