Sapms SID 3600/tcp problem
Hi All,
I got SAP dump "START_CALL_SICK" while working on SAP server suddeny, and found entry sapms<SID> 3600/tcp not present in services file. this happened eariler also, I added sapms<SID> 3600/tcp manullay, then it worked fine.
Could any body tell me what could be the problem.
Thanks & Regards
I think you should ask your system administrators. In some places they distribute a central copy of services file on a regular basis. If so, you might want to ask them to include sapms<SID>.
Similar Messages
-
Sapms SID 3600/tcp entry can i add in services file ?????
Hi Forum,
In /etc/services file i am having entry sapms<SID> 3600/tcp but i would also want to add one more entry in it as sapms<SID> 3900/tcp.
Can i do it? what afftect on system?
Thanks & Regards,
SAP CRMHi,
3900 port is used by the message server < if instance number is 00> for opens another
port than port use by sapmsSID, that is only used for internal communication with the
application servers. Application servers must also log on using this
port; otherwise, their logons are rejected.
in case you set in service file i think there is no effect
regards,
kaushal -
Sapms SID 3600/tcp entry can i added in services file
Dear Friend,
In /etc/services file having entry sapms<SID> 3600/tcp but i also want add one more entry in it as sapms<SID> 3900/tcp.
Can i do it? what afftect on system?
Thanks,
Regards,
SachinHi Sachin,
3900 port is used by the message server < if instance number is 00> for opens another port than port use by sapmsSID, that is only used for internal communication with theapplication servers. Application servers must also log on using this port; otherwise, their logons are rejected.
in case you set in service file i think there is no effect
Hope this helps.
Amit -
I am looking into a potential TCP problem I have found during comms
testing in our system running HP-UX 10.20. The problem is as much a
problem as it is a feature. This is how it happens:
* Client and server establish TCP connection. netstat -a shows state
as ESTABLISHED.
* Server side shuts down. TCP layer sends FIN to client, client sends
ACK back. State changes to FIN_WAIT_2.
* Client PC crashes never closing connection properly (normally it
sends FIN to which server replies ACK and state goes to CLOSED)
* Server computer keeps connection in the FIN_WAIT_2 indefinitely
tying up the server well-know port.
* Server cannot re-start, error "port already in use."
The TCP protocol allows for this situation. Now, HP, in
violation of the protocol (same as some other TCP Berkeley implementations),
has a way to have FIN_WAIT_2 states timeout. The way they do it is by
zapping kernel memory with adb to turn the timeout mechanism on and set the
timeout value. They do this with a shell script. If you want this timeout
to be a permanent feature you have to have it execute each time you reboot.
Our Forte application is TCP based, since given the right sequence
of events this scenario can happen to anyone, I wonder how Forte deals with
it and whether it can present a problem.
Many thanks
J. Suriolhi mike...thanks again...
I created two parallel loops as you said...it works fine but one problem is there....as I said two parallel while loops are there with separate stop button...so when I start vi both are starting.... when I stop the my other code while loop it stops but my tcp vi does not stop even I stop the button because it is in the forever state...so it does not reach that button until the client initiate for once atleast....I just want to exit this forever state from server side.whenever server wants...
how to terminate that forever state from tcp listen vi?
Attachments:
tcp.png 158 KB -
IDES on Network service 'sapms SID ' unknown
Dear All,
I have installed IDES ECC 6.0 on win2003R2 server , then i installed SAP GUI on the same system its working fine,
when i m trying to configure SAP GUI on other machine to acces the same IDES ERP 2005, its dectecting the SAP System its giving me an error:
could not connect to message server
Error: service 'sapms<SID>' unknown
plz help me
the system On wich i have installed IDES is accessible through net work
plz hepHi Rich,
I have the same problem, I've installed "NW_2004s_SR1_Presentation" "50078731_4" from service market place, there are guides in that too, but they are not upto my knowledge please help me. -
SAP SNC Server Side Trust Setup Problems
Single Server BOE instalation of BOE 3.1 SP4 to Windows 2008 R2 machine
Sap version 720 Patch level 7
We have used kbase article 1500150 and 1396213 to run thorugh the configuration and testing and all has checked out.
We are unable to have the "roles" returned when any "DN" value is entered in the SNC name entry in the entitlement systems tab.
We have turned on RFC tracing and have run the JCO test The RFC trace file is below followed by the JCO test information. JCO test was run twice, once with each DN just to make sure.
Please help
=======================RFC TRACE===========================
ERROR file opened at 20111116 174146 Eastern Standard Time, SAP-REL 720,0,93 RFC-VER 3 MT-SL
T:3988 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged
on) (USER
name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME Wed Nov 16 17:41:46 2011
RELEASE 720
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 1439
DETAIL SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER 55
T:2800 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged
on) (USER
name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME Wed Nov 16 17:41:46 2011
RELEASE 720
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 1439
DETAIL SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER 4
T:4760 Error in program 'CMS': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=torsbid01.cpr.ca, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged
on) (USER
name="p:CN=BOEDEV, OU=BOBJ, O=CPR, C=CA"
TIME Wed Nov 16 17:41:46 2011
RELEASE 720
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 1439
DETAIL SncPAcquireCred
SYSTEM CALL gss_acquire_cred
COUNTER 3
========================JCO TEST=======================
E:\BusinessObjects\javasdk\bin>java -classpath E:\BusinessObjects\Tomcat55\share
d\lib\sapjco.jar com.sap.mw.jco.support.JRfcTest
SAP JCo Client Test *
Possible SAP JCo-Tests
1. RFC_SYSTEM_INFO
2. CONNECTION
3. PERFORMANCE
4. INHOMOGENEOUS STRUCTURE/TABLE
15. TRANSACTIONAL RFC
99. Exit
Your Choice....... :2
SAP JCo TEST - CONNECTION TEST
Send message and wait for ECHO/INFO
CONNECTION PARAMETERS:
Server is R/2, R/3 or External (2/3/F/E): 3
Use load balancing (Y/N)Y...............: Y
R/3 system name.........................: BIN
Message server..........................: binmain
Selected group..........................: PUBLIC
Working with SNC (Y/N)N.................: N
RFC-SPECIFIC PARAMETERS:
Working with ABAP debugger (Y/N)N.......: N
Use SAPGUI (Y/N)N.......................: N
RFC trace (Y/N)N........................: N
JCo trace level (0-10)..................: 0
SAP LOGON DATA:
Client..................................: 000
UserID..................................: SAPCPIC
Password................................: XXXXXX
Language (E)............................: E
#Calls of this JCo Test...................: 1
Do You Want To Test With These Parameters (Y/N).. :N
CONNECTION PARAMETERS:
Server is R/2, R/3 or External (2/3/F/E): [3] :3
Use load balancing (Y/N)Y...............: [Y] :N
Host name of an application server......: [binmain] :torsbid01.
cpr.ca
System number...........................: [53] :00
Working with SNC (Y/N)N.................: [N] :Y
SNC Library Name........................: [C:\Program Files\SEC
UDE\SECUDE for R3\secude.dll] :E:\SAP\Crypto\sapcrypto.dll
SNC name of partner program.............: [s:sample@hs0335] :p:
CN=BOEDEV, OU=BOBJ, O=CPR, C=CA
RFC-SPECIFIC PARAMETERS:
Working with ABAP debugger (Y/N)N.......: [N] :N
Use SAPGUI (Y/N)N.......................: [N] :Y
Automatically invisible SAPGUI (Y/N)N...: [N] :Y
RFC trace (Y/N)N........................: [N] :Y
JCo trace level (0-10)..................: [0] :10
SAP LOGON DATA:
Client..................................: [000] :200
UserID..................................: [SAPCPIC] :Crystal
Password................................: [******] :Welcome1
Language (E)............................: [E] :
#Calls of this JCo Test...................: [1] :
Do You Want To Test With These Parameters (Y/N).. :y
>>>>>>>>>>>>>>>> SAP JCo TEST - CONNECTION TEST >>>>>>>>>>>>>>>>
main [18:02:41:758]: [JAV-LAYER] INFO: JCo version is 2.1.10 (2011-05-10)
main [18:02:41:758]: [JAV-LAYER] JCO.setProperty("jco.trace_level", "10")
main [18:02:41:758]: [JNI-LAYER] RFC.nativeSetTraceLevel() with r
c = RFC_OK leave, [SUCCESS]
main [18:02:41:758]: [JAV-LAYER] JCO.setProperty("jco.trace_path", ".")
Stack trace of call to JCO.setProperty("jco.trace_path", ".")
at com.sap.mw.jco.JCO.setProperty(JCO.java:554)
at com.sap.mw.jco.JCO.setTracePath(JCO.java:791)
at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1047)
at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1074)
at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:737)
at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:203)
E:\BusinessObjects\javasdk\bin>java -classpath E:\BusinessObjects\Tomcat55\share
d\lib\sapjco.jar com.sap.mw.jco.support.JRfcTest
SAP JCo Client Test *
Possible SAP JCo-Tests
1. RFC_SYSTEM_INFO
2. CONNECTION
3. PERFORMANCE
4. INHOMOGENEOUS STRUCTURE/TABLE
15. TRANSACTIONAL RFC
99. Exit
Your Choice....... :2
SAP JCo TEST - CONNECTION TEST
Send message and wait for ECHO/INFO
CONNECTION PARAMETERS:
Server is R/2, R/3 or External (2/3/F/E): 3
Use load balancing (Y/N)Y...............: Y
R/3 system name.........................: BIN
Message server..........................: binmain
Selected group..........................: PUBLIC
Working with SNC (Y/N)N.................: N
RFC-SPECIFIC PARAMETERS:
Working with ABAP debugger (Y/N)N.......: N
Use SAPGUI (Y/N)N.......................: N
RFC trace (Y/N)N........................: N
JCo trace level (0-10)..................: 0
SAP LOGON DATA:
Client..................................: 000
UserID..................................: SAPCPIC
Password................................: XXXXXX
Language (E)............................: E
#Calls of this JCo Test...................: 1
Do You Want To Test With These Parameters (Y/N).. :n
CONNECTION PARAMETERS:
Server is R/2, R/3 or External (2/3/F/E): [3] :3
Use load balancing (Y/N)Y...............: [Y] :N
Host name of an application server......: [binmain] :torsbid01.
cpr.ca
System number...........................: [53] :00
Working with SNC (Y/N)N.................: [N] :Y
SNC Library Name........................: [C:\Program Files\SEC
UDE\SECUDE for R3\secude.dll] :E:\SAP\Crypto\sapcrypto.dll
SNC name of partner program.............: [s:sample@hs0335] :p:
CN=BOEDEVSERVER, OU=BOBJ, O=CPR, C=CA
RFC-SPECIFIC PARAMETERS:
Working with ABAP debugger (Y/N)N.......: [N] :N
Use SAPGUI (Y/N)N.......................: [N] :Y
Automatically invisible SAPGUI (Y/N)N...: [N] :Y
RFC trace (Y/N)N........................: [N] :Y
JCo trace level (0-10)..................: [0] :10
SAP LOGON DATA:
Client..................................: [000] :200
UserID..................................: [SAPCPIC] :Crystal
Password................................: [******] :Welcome1
Language (E)............................: [E] :
#Calls of this JCo Test...................: [1] :
Do You Want To Test With These Parameters (Y/N).. :y
>>>>>>>>>>>>>>>> SAP JCo TEST - CONNECTION TEST >>>>>>>>>>>>>>>>
main [18:04:58:041]: [JAV-LAYER] INFO: JCo version is 2.1.10 (2011-05-10)
main [18:04:58:041]: [JAV-LAYER] JCO.setProperty("jco.trace_level", "10")
main [18:04:58:041]: [JNI-LAYER] RFC.nativeSetTraceLevel() with r
c = RFC_OK leave, [SUCCESS]
main [18:04:58:041]: [JAV-LAYER] JCO.setProperty("jco.trace_path", ".")
Stack trace of call to JCO.setProperty("jco.trace_path", ".")
at com.sap.mw.jco.JCO.setProperty(JCO.java:554)
at com.sap.mw.jco.JCO.setTracePath(JCO.java:791)
at com.sap.mw.jco.support.JRfcTest.correctProperties(JRfcTest.java:1047)
at com.sap.mw.jco.support.JRfcTest.initCall(JRfcTest.java:1074)
at com.sap.mw.jco.support.JRfcTest.runConnectionTest(JRfcTest.java:737)
at com.sap.mw.jco.support.JRfcTest.main(JRfcTest.java:203)
E:\BusinessObjects\javasdk\bin>
Edited by: Joseph Borojevic on Nov 17, 2011 12:07 AMThe error in the logs: u201CNo credentials found for this name (not logged on)u201Du201D usually is a problem with case.
We used the sapgenpse get_my_name command and found that the id being referenced was being pulled incorrectly with wrong case.
The problem was the ID we logged into the remote sesison into the windows server with.
That ID is the ID that the commands are run under.
The sapgenpse seclogin u2013p BOESERVER.pse command takes the ID of the user you are logged into the session with.
We re-ran the command when logged in with the user with the correct case and it worked -
Server-Side stream play problem
Hello,
I have a problem, which I am trying to solve for many nights already without any success.
Everytime I try to switch or change a server-side stream, it starts lagging after 2 seconds of playing and sound disappears.
Here are scenarios that result in that terrible lag:
1. I create server-side playlist with stream.play() with reset=false; when it is time to play the next movie in the playlist, it starts lagging after 2 seconds.
2. The same problems appears when I just switch streams. I installed FMF Feature Explorer and tried to launch SwitchStreams sample application: the same problem - server stream starts lagging after I switch streams with stream.play().
I tried on different servers (local and remote), with different players (debug player of FMS Admin Console, Standard Flash videoplayer component, OSMF player, Flex video player). I also tried all possible flv, f4v and mp4 file compression options for video files - still the same problem.
I have also tried literally thousands of Application.xml settings: changing buffer, buffer ration etc.
Is there any tip where I should search for a solution?
Thank you in advanceJayCharles,
Thank you for your reply.
But in my case the client is subscribed to a stream on the FMS. And that stream is switching video files and handling the playlist. So, I don't see any possibility to listen to onPlayStatus on a client-side, as my client is only playing live stream and has no clue what is happening on the server side.
Or I am wrong? -
Hi All
I am using Side Bar Navigation in My Pages.The problem is Link names are Big.
So whe page renders along with Side Bar Navigation ,Link get Wrapped up and appears in two line which looks weard. I dont want this to happen.One Link should come in one line only.
Any Idea to how to control this??
Regards
NaveenNo way to control this, this is a standard widget and users have no control over this.
Thanks
Tapash -
Hey guys,
Recently the latch that opens the side panel and releases the hard drives broke, fortunately the side panel came off but now randomly falls off because it does not lock back up. I still have AppleCare warrenty on the computer, is there anyway this can be fixed ?
Thanks a bunch.You are not talking to Apple, Inc when you post here. We are all users like you.
Applecare is very comprehensive coverage. If you have Applecare, and your computer is not working as it should, Apple will fix it, whatever it takes, including repairing or replacing the enclosure, if that is what it takes.
If a store is nearby, you can make an appointment for a Genius to evaluate the situation, no charge. They can fix simple problems on the spot, but rarely have the time for a problems that may require substantial dis-assembly. If the repair is covered, it may take overnight or a few days to complete -- longer if they have to send it to a depot for major repair. It is prudent to make sure your backups are current before you turn over your Mac for repair, or include just a spare drive with Mac OS X and no personal files on it. You will be asked for an Admin password. -
HP Color Laserjet 3600 Printing Problems with Airport Extreme & JetDirect
I have a HP Laserjet 3600n connected via ethernet cable to our Airport Extreme base station using the built-in JetDirect functionality of the printer. Prior to installing Snow Leopard we had no problems and every computer on the home network could see and print with full functionality on the printer.
After installing Snow Leopard, it took a while but I got the printer working again with the same setup. Then we had a power outage and the printer was no longer visible on the network or in the airport settings. Again it took a while but I once again got it to work. But now it seems like it keeps falling off the network and the printer itself either shows an IP address of 0.0.0.0 or another random one. The IP address should be generated by DHCP by the airport.
I don't know if this is a problem with Snow Leopard, the airport extreme, or the printer. The way I got it to work the last couple times no longer fixes the problem. Someone please help.
Message was edited by: balistikboyI don't know if this is related, but...
My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
Is there some trick I'm missing? -
Nokia 3600 slide Problem!
i have my nokia 3600 slide software update,after the update my phone restart, and ask to type the date and time. after that, the phone hangs.i reinstall the battery and do that step again.so i run again the software update after it fails the software update,the phone doesn't turn on..plz help me!
With the 3600 if you have already tried removing the battery and leaving it out for a few minutes, there isn't anything else you can try yourself. It is time to send it to the Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair. -
Creative Inspire t7900 side, back center problem
My side speakers, back speakers and the center speaker give no sound. But when I test the speakers I can hear sound from front left,right,sub and also center. I Cant hear both side speakers and the two at the back. I can hear sound from the sub when I test the back speakers(not a sub sound a speaker sound comes out of the sub) help please
My old 5.1 speakers working fineYou might want to follow the instructions in this knowledge base article to check if the speakers are working properly. Click on Speaker and Headphones -> Testing Speaker Systems with a Portable Device.
This should help you narrow down which device is working properly, the sound card or the speakers. I won't be able to comment on the AD988B 7.1 high definition audio device because this is a third-party product. You should seek help from the respective company if you need help on troubleshooting the audio device. -
Hello, I am using Windows 7 for a Charting Software: Ensign.
I recently changed DSL provider and I am experiencing a problematic delay in TCP communication that prevents the charting software to work smoothly.
Is there anything I can do on the machine to improve connectivity parameters?
The connectivity works fine, it is just with this TCP connection that I am experiencing difficulties.
Thanks,
ArnaldoHi,
I agree with Milos, we're not familiar with this software, and have no resource about it, it is recommended to contact this support
http://www.ensignsoftware.com/contact.php
Thanks for your understanding
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
Upgrading distribution lists created in Ex2003 - any side-effects or problems elsewhere?
Hello,
We migrated from Ex2003 to Ex2010 a couple of years ago.
I'm trying to change the name of a few old distribution lists in the EMC and I'm being prompted to "upgrade" them and warned that it's a one-way conversion.
I know this is needed and I know that it's necessary. My question is if the conversion will ONLY affect the lists, or if it will affect the members or some other part of the Exchange organisation in some way? I also read that it prevents anonymous users
(ie, Internet users) from mailing the upgraded lists by default.
Exchange 2010 latest service pack with Outlook 2010 clients. Single forest/domain. DAG-based implementation in two AD-sites.
Thanks,
- Alan.Hi Alan,
From your description, I would like to clarify the following thing:
Upgrading the Exchange version of an object is a one-way-street. After you upgrade the Exchange version of this distribution group, it cannot be managed or downgraded to the Exchange 2003 level with the Exchange admin tools anymore. A user with an Exchange
2003 mailbox cannot modify the distribution group membership of an Exchange 2010 version distribution group.
For more information, here is a blog for your reference.
Distribution Group Management Across Exchange Server Versions
http://blogs.technet.com/b/mspfe/archive/2013/12/05/distribution-group-management-across-exchange-server-versions.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
For the past two days, i keep getting an error message on the i Tunes store that it can't process my payment and to come back later. Not Apple's MO to miss a sales opportunity. Anyone esle getting this message?
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013
Maybe you are looking for
-
For several years I have been using a Panasonic DV camcorder as a DVCR for capturing to Prem Pro 1.5. Using DV out into a Capture card on a HP Windows 8 computer. Now I just tried it with PP CC and gives me a message "Can't activate Recorder. Try res
-
How can I get Windows Internet explorer on my MacBook air?
I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.
-
Error in process -in SRM not able to generate a PO in R/3
Hi Experts, Can anyone tell me hwo to resolve this problem? This is classic scenario, version 4.0 The user has raised a shopping cart without assigning vendor to it, so it has gone error in process as we dont have the Purchase requistion scenario. I
-
Error when deploying webservice applicaiton in 9.2
hi there i was wondering if anyone knows anything about the following exception. it was thrown during the deployment of a webservice application. the application was deployed OK and was running. my guess is that the null pointer exception didn't real
-
2 users can access the same record
Hi all, I have 2 users: Sale person and his assistant, they are given the same role as Sales. Both have ability to create a new record and access each other record. How do I create such type of user and which privillege should grant for them? Thank y