SAPRouter problem

Hello,
I'm trying to start my SapRouter with the command :
saprouter -r -R c:\saprouter\saprouttab
But it sounds that doesn't work.
Here is the error message :
trcfile dev_rout
no logging active
ERROR => invalid lines in c:\saprouter\saprouttab, see dev_rout [nixxrout.c 2973]
This server is on a DMZ and SAPServers are on internal network but everything on the firewall was checked out.
Hereunder the content of the saprouttab file :
P LUEXT007 sapserv3 3299
P sapserv3 LUEXT007 3200
P LUEXT007 sapserv3 3399
P sapserv3 LUEXT007 3300
P ludbs010 sapserv3 3299
P ludbs019 sapserv3 3299
P ludbs020 sapserv3 3299
P ludbs013 sapserv3 3299
P ludbs026 sapserv3 3299
P ludbs027 sapserv3 3299
P ludbs028 sapserv3 3299
P ludbs031 sapserv3 3299
P ludbs032 sapserv3 3299
P ludbstest9i sapserv3 3299
P 172.30.184.66 sapserv3 3299
P ludbs010 sapserv3 3399
P ludbs019 sapserv3 3399
P ludbs020 sapserv3 3399
P ludbs013 sapserv3 3399
P ludbs026 sapserv3 3399
P ludbs027 sapserv3 3399
P ludbs028 sapserv3 3399
P ludbs031 sapserv3 3399
P ludbs032 sapserv3 3399
P ludbstest9i sapserv3 3399
P ludbs010 sapserv3 3300
P ludbs019 sapserv3 3300
P ludbs020 sapserv3 3300
P ludbs013 sapserv3 3300
P ludbs026 sapserv3 3300
P ludbs027 sapserv3 3300
P ludbs028 sapserv3 3300
P ludbs031 sapserv3 3300
P ludbs032 sapserv3 3300
P ludbstest9i sapserv3 3300
P sapserv3 LUEXT007 3299
P sapserv3 ludbs010 3200
P sapserv3 ludbs019 3200
P sapserv3 ludbs020 3200
P sapserv3 ludbs013 3200
P sapserv3 ludbs026 3200
P sapserv3 ludbs027 3200
P sapserv3 ludbs028 3200
P sapserv3 ludbs031 3200
P sapserv3 ludbs032 3200
P sapserv3 ludbstest9i 3200
P sapserv3 ludbs010 3299
P sapserv3 ludbs019 3299
P sapserv3 ludbs020 3299
P sapserv3 ludbs013 3299
P sapserv3 ludbs026 3299
P sapserv3 ludbs027 3299
P sapserv3 ludbs028 3299
P sapserv3 ludbs031 3299
P sapserv3 ludbs032 3299
P sapserv3 ludbstest9i 3299
P sapserv3 ludbs010 3300
P sapserv3 ludbs019 3300
P sapserv3 ludbs020 3300
P sapserv3 ludbs013 3300
P sapserv3 ludbs026 3300
P sapserv3 ludbs027 3300
P sapserv3 ludbs028 3300
P sapserv3 ludbs031 3300
P sapserv3 ludbs032 3300
P sapserv3 ludbstest9i 3300
p sapserv3 ludbs010 3399
p sapserv3 ludbs019 3399
P sapserv3 ludbs020 3399
P sapserv3 ludbs013 3399
P sapserv3 ludbs026 3399
P sapserv3 ludbs027 3399
P sapserv3 ludbs028 3399
P sapserv3 ludbs031 3399
P sapserv3 ludbs032 3399
P sapserv3 ludbstest9i 3399
p * 147.204.2.232 * *
p * 194.117.106.130 * *
p * 147.204.2.5 * *
Thank you in advance,
Alex

Hi Alexandre,
                  If you want to use the SNC then definitely you need to have the
                  secure certificate. First you have to generate it using sapgenpse
                  it will create a file called cert in the folder saprouter\ntintel
                  prior configure the path of SNC_LIB and Also SECUDIR
                  SECUDIR-->usr/sap/saprouter
                  SNC_LIB--->usr/sap/saprouter/ntintel/sapcrypto.dll
                  set this variables. Then go to service market place and go to TCS
                  Request for the certificate then copy that certificate and paste in a txt
                  file with the name srcert.then import that certificate into saprouter.
                  Maintain routetab and then start the router.
Reward points if helpful.
Regards,
Vamshi.

Similar Messages

SAPRouter problem ERROR: sapserv2a: route permission denied

Hello Gurus,
we have a problem with connection with SAPOSS, when we test the connection present the following message:
Connection Error
Error when opening an RFC connection
ERROR: sapserv2a: route permission denied (200.30.70.220 to oss001, sapmsOSS)
LOCATION: SAProuter 37.15 on sapserv2a
COMPONENT: NI (network interface)
COUNTER: 5
MODULE:
LINE:
RETURN CODE: -93
SUBRC: 0
RELEASE: 640
TIME: Fri Apr 11 23:54:16 2008
VERSION: 37
In the Tx OSS1 we have:
saprouter1
name: server name where saprouter is installed
IP address: LAN IP address where saprouter is installed (is locally intalled)
Instance no. 99
Saprouter at SAP
Name sapserv2
IP Address 194.39.131.34 (ping to this IP response)
instance 99
name oss001
db name o01
instance 01
In Tx ST11, dev_lg log file contains:
RSTR0006: Display Developer Traces
trc file: "dev_lg", trc level: 1, release: "700"
[Thr 4780] Fri Apr 11 16:41:16 2008
[Thr 4780] *** ERROR => NiBufIProcMsg: hdl 0 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp 2125]
[Thr 4780] *** ERROR => MsINiWrite: NiBufSend (rc=NIEROUT_INTERN) [msxxi.c 2480]
[Thr 4780] *** ERROR => MsIAttachEx: MsINiWrite (rc=NIEROUT_INTERN) [msxxi.c 734]
[Thr 4780] *** ERROR => LgIAttach: MsAttach (rc=NIEROUT_INTERN) [lgxx.c 3980]
[Thr 4780] *** ERROR => LgApplSrvInfo: LgIAttach(rc=LGEMSLAYER) [lgxx.c 1272]
[Thr 4780]
[Thr 4780] * LOCATION SAProuter 37.15 on sapserv2a
[Thr 4780] * ERROR sapserv2a: route permission denied (200.30.70.220 to oss001,
 sapmsO01)
[Thr 4780] *
TIME Fri Apr 11 23:32:17 2008
[Thr 4780] * RELEASE 640
[Thr 4780] * COMPONENT NI (network interface)
[Thr 4780] * VERSION 37
[Thr 4780] * RC -93
[Thr 4780] * COUNTER 3
[Thr 4780] *
[Thr 4780] *****************************************************************************
dev_rout file in /usr/sap/saprouter contains:
trc file: "dev_rout", trc level: 1, release: "700"
Fri Apr 11 17:02:21 2008
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -R
command line arg 3: ./saprouttab
main: pid = 5504, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: './saprouttab'
Fri Apr 11 17:02:36 2008
ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2125]
Fri Apr 11 17:03:15 2008
ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2125]
Thanks,
HEPC

Hello Kaushik,
the problem was solved adding the following line in the saprouttab file, this line must be the firts line in the file:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
the file continue with:
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 1> 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 2> 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 1> 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server 2> 3200
outbound connections to <sapserv2> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <IP server with saprouter> 3299
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
permission entries to check if connection is allowed at all
P <IP server 1> 194.39.131.34 *
P <IP server 2> 194.39.131.34 *
I hope this solve your problem,
Hernando Polania
Colombia

Saprouter problem ,, no connectivity to SAP OSS

Hi Tea,
WE have a problem with SAP OSS Connectivity, there is a failure for SNC and the log shows the follwoing error message
when we try to ping the oss conection from sm59
Logon    Connection Error
Error Details       Error when opening an RFC connection
Error Details       ERROR: SNC processing failed: SncProcessInput
Error Details       LOCATION: SAProuter 39.2 (SP4) on 'sapserv2a'
Error Details       DETAIL: NiSncIProcIn: sncrc=-4;8000000100498dc0
Error Details       COMPONENT: NI (network interface)
Error Details       COUNTER: 135
Error Details       MODULE: nisnc.c
Error Details       LINE: 946
Error Details       RETURN CODE: -93
Error Details       SUBRC: 0
Error Details       RELEASE: 710
Error Details       TIME: Tue Jul 20 08:43:42 2010
Error Details       VERSION: 39
Please help to resolve these issue.
Thanks
Arpita

Hi!
You have rectified the error?
I too have faced the similar
trc file: "dev_rout", trc level: 1, release: "640"
Tue Jul 27 12:50:16 2010
SAP Network Interface Router, Version 37.11
Tue Jul 27 12:51:07 2010
ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c      423]
Somebody has ideas?

Login SAP Netweaver

Hi everybody,
I have just installed on my laptop SAP NetWeaver (also GUI), but I dont know to logon at the system.
I also configured my interface loopback.
I think that it is perhaps a SAProuter problem but I don't know to configure.
Can you to help me to configure my files: (sapmsg.ini - saproute.ini - sapms.ini)
They is the examples, but I need the real examples.
sapmsg.ini
[Message Server]
C11 = hostname.yourdomain
O01 = oss001
saproute.ini
[Router]
SAP Walldorf=/H/hostname.your.saprouter/S/sapdp99/H/147.204.64.1/S/sapdp99
SAP Foster City=/H/hostname.your.saprouter/S/sapdp99/H/147.204.69.1/S/sapdp99
sapms.ini
sapmsC11 3670/tcp
sapmsO01 3616/tcp
Thx
@= [email protected]

You must setup the logon pad.
application server =   localhost
system id           =   NSP
system number       =   00
Log in as BCUSER, with password minisap
Regards,
Rich Heilman

SAPROUTER CONNECTION PROBLEM

Hi all
I have a sap router which was working fine until our IT dept changed from an old firewall to a new one with new ip addresses, since then i havent been able to connect to the SAP OSS from my ERP systems and i can't connect to my servers using a remote connection. I have changed the gateway fro the sap router to see the new changes and have had the ports 3200 and 3900 open on the PUBLIC ip address. where couls be the problem with my connection

Hi,
Please ensure you have correct entries (IP Address, syntax) in your 'saproute.ini' under %winnt% directory (or wherever you have this 'saproute.ini' file located) in your SAP system.
for example for below router entry:
Router
sapservX=/H/your-SAProuter-internal-IP-address/H/SAPServX-IP-address/H/
Example:
sapserv4=/H/200.10.10.24/H/204.79.199.2/H/
200.10.10.24 is my SAP routeru2019s IP address.
204.79.199.2 is SAPServ4u2019s IP address.
Also, ask SAP if they are able to connect to your Router atlest. If they are able to connect to your router then the problem is between your SAP systems and your router alone. Otherwise you need to cross verify the whole connectivity.
Regards
Sekhar

Saprouter download problem

Hi! Can anyone help me with this problem. I want to download the content of my download basket but upon downloading i got this error Http: 400 bad request.... and it lead me to nothing. How do I correct this problem? The file that i'm trying to download is saprouter 8-20001568.sar.
Thanks in advance
yshenz

Hello,
Sorry I don't see what you mean with 'X25', can you explain ?
My firewall (ISA server 2006) is configured to let incoming connection go through and my saprouttab too, the parameters mean to be correct cause it's work but may be there is a problem with compatibility between ISA server and the saprouter ?
When the connection is local, we didn't have problem. Only when the connection is from the WAN.
Thanks
regards

Saprouter reinstalling problem

Hi to all
I am having a problem previously i was having saprouter installed in one of my system with operating system XP installed in it.Now for some reasons i had to format that system and now when i am trying to connect saprouter i am unable to do that.Can any one please help me step by step how to reinstal saprouter again as i have already registered once how can i fix this problem

Hi Sanjay ,
Please let me know whether your IP ( Public and private ) and the hostname is changed or not .
If not changed , you can reinstall the SAPROUTER without registering again .
If it is changed , you need to register again and the document for registering your connection/SAProuter
IP address with SAP is Note 28976 (Remote Connection Data Sheet). This note contains all of
the information that you require when setting up your connection to SAP.
Regards,
Nibu

Saprouter connexion problem

Hello everyone,
I face a problem with my saprouter, when I stay connected to SAP without using it more than 15 minutes, the connection is broken down !!!
The connection of my saprouter is ok if I work on SAP without interruption.
Any idea to tune the connection keepalive of saprouter ?
Thanks a lot in advance
Best regards

Hello,
Sorry I don't see what you mean with 'X25', can you explain ?
My firewall (ISA server 2006) is configured to let incoming connection go through and my saprouttab too, the parameters mean to be correct cause it's work but may be there is a problem with compatibility between ISA server and the saprouter ?
When the connection is local, we didn't have problem. Only when the connection is from the WAN.
Thanks
regards

RFC Problem saprouter

Hi Friends,
I want to establish a RFC connection to a system.
Normaly, then I logon to the destination system using the gui I have to provide a saprouter string like /H/123.23.22.222/H/.
So then I connect through rfc how can I provide the string.
Thanks in advance.
Jimbob

Hi Jimbob,
Provide something like "/H/<sap_router_hostname>/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001" string into target with sysnr "01". Don't forget to define "sapdp99" in your services file on the host, if it is not exist.
Best regards,
Orkun Gedik

Saprouter starting problem

Hi All,
I configured saprouter in solman server(windows) iam unable start saprouter . I gave the follwoing command its not giving any output.
C:\saprouter\ntintel>saprouter -r -G routlog -S 3299 -K "p:CN=solman, OU=SAProut
er, O=SAP, C=DE"
trcfile dev_rout
logfile routlog
Regards
Siva

Hi All,
I ran this command. saprouter -r -V 3 -K "p:<Distinguished name>"
I get the following message in a 'trace file'
trc file: "dev_rout", trc level: 3, release: "700"
Thu Oct 23 09:22:28 2008
NiHsLInit: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 at 02CA02C8)
NiIInit: host/serv bufs already initialized
NiPGetNodeAddrList: got 1 interface(s) from operating system
 [0] IP-Address: 10.14.147.32
SAP Network Interface Router, Version 38.10
Compiled May 22 2007 00:31:59
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 3
command line arg 4: -K
command line arg 5: p:CN=solman, OU=0000731019, OU=SAProuter, O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
->> SncInit(prg=0, ini_fname=(NULL), &sec_avail=0157F6BF)
SncInit(): Initializing Secure Network Communication (SNC)
 PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
SncInit(): Trying environment variable SNC_LIB as a
 gssapi library name: "C:\saprouter\ntintel\sapcrypto.dll ".
load shared library (C:\saprouter\ntintel\sapcrypto.dll ), hdl 0
 using "C:\saprouter\ntintel\sapcrypto.dll"
DlLoadFunc: GetProcAddress(sapsnc_init_adapter) Error 127
 Error 127 = "The specified procedure could not be found."
load shared func (gss_acquire_cred) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_release_cred) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_init_sec_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_accept_sec_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_process_context_token) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_delete_sec_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_context_time) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_get_mic) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_verify_mic) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_wrap) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_unwrap) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_display_status) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_indicate_mechs) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_compare_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_display_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_import_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_release_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_release_buffer) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_release_oid_set) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_inquire_cred) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_add_cred) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_inquire_cred_by_mech) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_inquire_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_wrap_size_limit) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_export_sec_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_import_sec_context) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_create_empty_oid_set) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_add_oid_set_member) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_test_oid_set_member) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_inquire_names_for_mech) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_inquire_mechs_for_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_canonicalize_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_export_name) from C:\saprouter\ntintel\sapcrypto.dll
load shared func (gss_duplicate_name) from C:\saprouter\ntintel\sapcrypto.dll
File "C:\saprouter\ntintel\sapcrypto.dll " dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncPDLInit()==SAP_O_K
<<- SncInit()==SAP_O_K
 sec_avail = "true"
->> SncSetMyName(snc_hdl=00000000, myname="p:CN=solman, OU=0000731019, OU=SAProuter, O=SAP, C=DE")
<<- SncSetMyName()==SAP_O_K
 in: myname = "p:CN=solman, OU=0000731019, OU=SAProuter, O=SAP, C=DE"
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiIMyHostName: hostname = 'solman'
main: pid = 1032, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 876 (I4; ST)
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 0 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIListen: state of hdl 0 NI_LISTEN
NiIListen: listen for client requests on hdl 0
NiSelICreateSet: new set0
SiSelNInit: allocate 134560 bytes for FI (811)
NiSelIInit: size of set0 is 811
SiSelNSet: sock 876 added to set pos 0
NiSelIAddMsg: added hdl 0 to set0
SiSelNSet: set events of sock 876 to: rp-
reading routtab: './saprouttab'
NiStrToAddrMask: '194.117.106.129' -> 194.117.106.129 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiStrToAddrMask: '10.14.147.32' -> 10.14.147.32 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiStrToAddrMask: '194.117.106.129' -> 194.117.106.129 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '3299' = port 0C.E3/3299
NiStrToAddrMask: '10.14.147.32' -> 10.14.147.32 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiStrToAddrMask: '194.117.106.129' -> 194.117.106.129 [ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff]
NiIGetServNo: servicename '3299' = port 0C.E3/3299
contents of routtab ('./saprouttab', 4 entries):
P, 194.117.106.129 ffff:ffff:ffff: 10.14.147.32 ffff:ffff:ffff: 3200 *
P, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 194.117.106.129 ffff:ffff:ffff: 3299 *
P, 10.14.147.32 ffff:ffff:ffff: 194.117.106.129 ffff:ffff:ffff: 3299 *
D, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 * *
NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)
Regards
Siva

Problems with saprouter

Hi Gurus,
When we open connection to sap, it getting connected. But after 2 hrs its getting disconnected. Whenever we open the connection, its connected for 2 hrs only. Is there any setting to be maintained at the saprouter.
Can anyone help me in this.
Thanks and Regards,
Sailesh K

Hi Silesh,
How do you open the connection, Through solman or through OSS site?
regards,
vinodh

Saprouter scn problem

Hello!
I am trying to make s sap router tunnel with this instruction:
How to setup SNC connection between SAProuters - Basis Corner - SCN Wiki
When I run niping I get an error:
I run sapgenpse get_pse -v -noreq -p local.pse "CN=saprouter" where saprouter is the name of the local user. Maybe I am wrong ?
What should I write in CN ? Maybe host\username ? In other instructions I see that peoples make the certificate like:
CN=sgw, OU=IT, O=FTVL, C=COM, but I don't know how to use it for the local user on host, like CN=username, O=computername, C=domainname. C=local
Thanks!

Sapgenpse get_my_name -v -n Issuer:
first host:
Opening PSE "C:\saprouter\local.pse"...
PSE (v2) open ok.
Retrieving my certificate... ok.
Getting requested information... ok.
SSO for USER "saprouter"
with PSE file "C:\saprouter\local.pse"
Issuer : CN=<myhost>
second host:
Opening PSE "C:\saprouter\local.pse"...
PSE (v2) open ok.
Retrieving my certificate... ok.
Getting requested information... ok.
SSO for USER "saprouter"
with PSE file "C:\saprouter\local.pse"
Issuer : CN=<my_second_host>

Windows 7 64 bit giving BEx Problems. Big time problems (!!)

Hi there, i just got through an issue with BEx connecting to SAP on a laptop using Windows 7. After googling and sdning and SAP noting for a while did not find any suitable answer to this issue which seems strange to me as Windows 7 64 bit is not really a brand new product. The full specs are as follow. Anyone bringing some light into this subject would be very much appreciatted.
=> SAP Logon 720 with 0 Patch Level.
=> MS Office 2007
=> Windows 7 64 bits
In C:\Windows i got:
     -> SAPMSG.ini
     -> Saproute.ini
     -> saplogon.ini
in C:\Users\username\AppData\Roaming\SAP\Common i got:
     -> Sapgrph
     -> saplogon
     -> SapLogonTree.xml
     -> saprules.xml
     -> Saproute
     -> services
The issue is that i am not able to logon either via BEx 7.x or 3.x. The Error message is:
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to message server failed
Connect_PM MSHOST=/H/172.17.255.194/H/XXX.intranet.xxxxxxx.com, R3NAME=XX, GROUP=PUBLIC
LOCATION    CPIC (TCP/IP) on local host my-pc
ERROR       timeout while pending for route completion
TIME        Wed Jul 27 10:56:44 2011
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -12
DETAIL      NiErrSet
COUNTER     1

Hi Alex ,
SAP GUI for Windows 7.20 and all related applications including SAP Desktop Office Integration / BI Frontend / BW Frontend do not support Office 2010 64bit, only 32bit versions of Office are supported.
This means that when using 64bit operating sytems with SAP GUI for Windows and related components you have to use a 32bit Microsoft Office version .
For your issue , you can check these Notes.
1. 1442028 - SAP GUI for Windows 7.20: No support for Office 2010 64bit
2. 1264857 -   BExAnalyzer 7.X does not work on 64 bit Windows PCs
3. 1503786 - Precalc server is not created correctly in TA:RSPRECADMIN
4. 1589565 - Connection problem in Precalc server and Excel hangs
Regards,
Lokesh

Error in starting SAProuter.

Hi! Gurus,
To establish remote connection for SAP Support I have installed SAProuter in our ECC Server host. But when I am trying to start the service it cannot start. self testing is OK. I cannot cerate SAProuter (file / table ?) Not sure about really how to create it. I have checked related
notes and manual. Still it is not clear to me .
Please help me.
error files are attached.
trc file: "dev_rout", trc level: 1, release: "640"
Fri Jun 02 04:05:45 2006
SAP Network Interface Router, Version 37.0
command line arg 0:     saprouter
command line arg 1:     -r
main(): pid = 4712, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
ERROR => fopen ./saprouttab (2: No such file or directory) [nirout.cpp   7549]
**LOG Q0I=> NiRRouttab: fopen (2: ENOENT: No such file or directory OR: The system cannot find the file specified. ) [nirout.cpp 7550]
cannot open './saprouttab': all routing disabled!!!
Could not open permission table
With Thanks and regards,
Pratip Bhattacharyya

Hi! Barry,
Rightly you have detected my problem. Yes , I am trying to create a route permission table.
But, unfortuanetly I am not able to do it till now. Even the PDF reffered by you and it's earlier documents. As per the doc (pg 25.) I have already created a txt file named as saprouttab.txt in d:\usr\sap\saprouter folder. Our Server is in Windows 2003. I have tried with defferent combination of connect string. But nothing working. I cannot understand the the problem. Am I doing anything wrong or missed something ?
I simply want to establish a connection in-between SAP Support server and our ECC server.
Awaiting for your advise.
With regards,
Pratip Bhattacharyya

Problem with large spool lists

Hello everyone,
we have the following problem with one of our printers. When we are trying to print larger lists (>30 pages) the spool shows an "unknown error" and only a few pages are printed out.
We have the following setup. A Kyocera FS-9520DN printer with Device Type KYOAAB1C which is connected via saprouter connection and host spool access method U. The only error I get from the tracefile of the Spool WP is
S Tue Feb 22 07:34:37 2011
S *** ERROR => cannot write to connection [rspoclpd.c   857]
S *** ERROR => Lost connection, control file not sent [rspoyunx.c   1754]
T new memory block 000000002B6D6CE0
S handle memory type is RSTSPROMMM
and the SP01 error message
Status:              Incorrect (Reason unknown)
Job status:          Completed
Area:                Unknown
Error:               Reason unknown
Last event:
Message:             Processing completed by spool work process
Any suggestions what might improve the situation? Thanks in advance
Marco

Hi,
A direct connection to a remote printer is not recommended as per the SAP Note #64628.
The best option is to define the printer locally on the SAP server with Access method L for Unix or Access Method C for windows. If you need to use remote Access Method U or S, you should use a print server in between the SAP system and the printers.
Regards,
Aidan

SAPRouter problem

Similar Messages

Maybe you are looking for