Edit Page;Report;Enable CSV Output;Apply Changes;Page Not Found;wwv_flow

Hi,
We have a really annoying error in our application, whereby we are unable to save ANY changes to report attributes if Enable CSV Output is Yes.
I have many pages with Enable CSV Output set to Yes, and when run, the pages can indeed be exported to Excel, fine so far.
However, if we do Edit Page, choose Report change Enable CSV Output to No, then apply changes the option is removed ok - BUT if we then set it back to Yes, when we apply changes again we get a Page Not Found error at this address ;
http://sglas-sand.fm.rbsgrp.net:7780/pls/fdm_uat2/wwv_flow.accept
We obviously dont need to keep changing this value, but the above demonstrates that our reports do currently support CSV output, but for some recent reason, trying to save a page where this option has been changed to Yes causes this crash.
We also seem unable to change and save any other attribute when CSV Output is set to Yes. This leaves us in a tricky situation - unable to change our pages unless we are prepared to remove the Export option!
We were wondering if the support of this this option requires any special processing / objects / etc to be availble / running. Any help greatly appreciated.
John Nice
Royal Bank of Scotland - Finance IT

Hi Scott,
Thanks for the reply. Our errors were like this in the log ;
[Thu Feb 22 14:52:33 2007] [error] [client <private ip removed>] ] [ecid: 1172155953:<private ip removed>] :30306:0:1855,0] mod_plsql: /pls/fdm_uat2/wwv_flow.accept HTTP-404 ORA-06550: line 23, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 23, column 3:\nPL/SQL: Statement ignored\n
Versions are ;
Database : 10.2.02
HTMLDB : 2.2
Apache : 10g release 2
Regards,
John
Message was edited by:
John @ RBoS

Similar Messages

Enable CSV Output

HI,
How can i enable CSV output in SQL Script Regiaon
Steps,
Page Definition > SQL Report >Report Attributes > Report Export > Enable CSV Output
Best Regards
Perumal Swmy.R

HI,
Any body is there ?
Vikas..
Kindly Provide

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load.

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load. If I change the publish method to SCORM the SWF works, and if I turn off reporting the SWF also works.

OK. That makes sense now. Captivate 6 changed over to Rustici's LMS drivers. Cp7 must have made even further changes that mean you must have an LMS present if you turn on reporting.
I would suggest you just turn off reporting while you are testing other aspects of the course functionality during development, and only turn on reporting when you are ready to upload to your LMS.

Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found

hi,
While running a page using jdeveloper am getting error like
Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found.
am very thankful to the response
Thanks
Surya

Hi,
I faced the same issue.
I fixed it by searching the missing file (In my case MyEO.xml which is a removed file) using JDeveloper (Menu Search/Search Files...).
It found an occurence in the related .jpr file.
In the .jpr, I deleted the related lines:
<Item>
<Key class="java.net.URL" path="xx/oracle/apps/.../MyEO.xml"/>
<Value idref="15"/>
</Item>
That's it.
Regards,
Olivier

Firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast. FF version 8.0.1, windows vista & windows XP.

firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast.
FF version 8.0.1, windows vista & windows XP.
Please help
Generally we dont get any reply to the questions asked here!

65kid wrote:https://bbs.archlinux.org/viewtopic.php?id=162327
Thank you for the link, but I am not sure how this is going to help me: I am not booting straight to an X session, but prefer to log into TTY1 and have my login shell handle everything from there.
Here is the relevant part of my .zprofile:
if (( UID )); then
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec systemd --user
fi
As far as I understand, your method works if I enable the [email protected] template when actually booting straight to X.

I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
Mylenium

Standard SAP HR report to give output on change in fields values

Hi
Is there any starndard report in sap hr which will give output on changes on the infotype fileds for given two dates.

Hi,
Use FM HR_INFOTYPE_LOG_GET_DETAIL .
Regards,
Srini.

In Aperture Books, changes to Master Page FONTS don't get applied to pages?

In making a book in Aperture, I can change the font in a Master Page (or create a new Master Page with the font I like), but when I try to apply the changed/new Master Page to any given page in the book, the font I want doesn't show up. It's still there in the Master Page, but doesn't get applied. I've seen the thread on a related subject from 2008, but the one work-around proposed there is over my head, technically. Is there anything new to help me in 2012?

What happens when you perform an Apply Master Pages operation?
Format > Page Layout > Apply Master Pages

CSV output = Yes, but link not displayed

Hi,
Anyone encountered/know how to fix this one?
I've a report in an SQL Report region with CSV Output = YES, but the link label is not displayed.
(CSV link is displayed OK on other reports).
Thanks
John D

John,
The report template has to contain a certain substitution string. Please see the popup help for that yes/no selector on the report attributes page.
Scott

Apply changes button not working as expected

Hi
I have a page, this page has some fields and a drop-down list where it has a projectname as the values and when I change a value in the drop-down list and click on "Apply Changes" button it does update the table and the changes can be viewed on the page ............. but when I have created a copy of this same page and changed the select statement of the drop-down list and in order to change the year from the drop-down list and click on apply changes then it does not update the table or changes are not reflected on the page.... am I doing soemthing wrong somewhere , but not sure where !
Can anyone know what could be the reason ....?
thanks

Hi Nancy,
That could be the case, but I tried it multiple times during the day and it was not working. I think I would have notice it if I "missclicked" it like 10 times in a row. I normally use this option more than once a day and it works. But If it happen again, I'll pay attention to that.
Thanks!

Won't open new page when I click bookmark, instead changes pages EVEN THO PREFERENCES SET TO OPEN NEW PAGES

Firefox keeps on changing pages, even yanking minimized pages back onto the screen and changing them, even though I have Firefox preferences set to always open new pages to accommodate links on a page or bookmarks.
I don't want Firefox to tamper with any pages, period. If I have a pages minimized, no way should Firefox be yanking that page up back onto the screen because it's "too lazy" to open up a new page to accommodate a bookmark or link clicked on.
It's extremely aggravating to click a link on a page, get a new page then, when I click the page to close it I find no page underneath, indicating that Firefox had changed the original page rather than open up a new page automatically to accommodate the link, etc.
What's the point of me in Firefox preferences setting it up for Firefox to open up new pages automatically when afterwards it doesn't?

Perhaps try the add-on Tab Mix Plus. It has a feature that you can force every link to open in a new tab if you like:
* http://tmp.garyr.net/help/#Links (description of options - see "Force to open in new tab")
* https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/ (install page)
I don't know whether it has any effect on bookmarks. You can open those in a new window by holding Shift or in a new tab by holding Ctrl when clicking.

Master Pages don't transfer when I change page size in a book

I had exactly the same problem in CS4, which is why I switched to CS5.5 -- but apparently nothing has changed.
I have a book of about 30 chapters. It was originally set up in 6x9 format, but after it was all formatted, my client decided he wanted the pages 5x8.
It should be easy, right? Just change the layout for the master pages of the Style Source document, fix the text sizing, etc. Then in each ensuing chapter, just download the new masters from the style source document. When I get a warning asking me if the master pages in the target document should be overwritten, I say yes and it does its thing.
Only it doesn't work. Oh, the text in the masters is all over the place, which is to be expected -- but the master pages and the book pages are still 6x9, not 5x8.
I tried synchronizing the book, being careful that Master Pages is checked in the options. I got a warning that some of the text would need to be fixed. No problem. Except that the pages in all the documents except the Style Source are still 6x9!!
I have a feeling I've wasted my money on the upgrade. A lot of bells and whistles have been added, but the CS4 problems aren't solved.
Please, can somebody help? I do this for a living, and I'm wasting waaaaaay too much time trying to clean up messes like these.

No, Peter, I never solved it. But thank you for asking!
I finally started a whole new book, with the smaller master pages. I saved a few blank pages for each chapter file, then I copied and pasted the text of each chapter onto the new pages. Fortunately I was able to transfer paragraph and character styles to the new document, and the formatting of the copied text transferred also.
But it was still a lot of work.
I don't even want to think about trying to design a document with different size pages!

After I use the Develop module in LR4 I edit in PS-CS4, now the develop changes do not show in CS4.

After I use the Develop module in LR4 I edit in PS-CS4, now the develop module changes do not show in CS4.

You need to send the file over to CS4 as a PSD (with Lightroom Adjustments checked)
CS4 cannot interpret the newer processing version used by Lightroom 4

For xml reports in ebs, if default font is not found, what does OPP do?

If the OPP is unable to locate a font file while merging an XML report in EBS R12.1.3 running on AIX (BI Version 5.6.3), what does it do? Is there a default set somewhere, and if so, can it be changed? Can it be changed only at the site level, or at the indvidual template level? Is there just one default or can you specify a different default for each font? Is there anyway to force the merge to error if the requested font is not found?

it's very difficult to say
you can seek some MOS for specific problem
IMHO
based on
Specific Special Characters Are Not Getting Printed In Pdf Output Format From XML Publisher Reports (Doc ID 1283873.1)
i try to suppose that some symbol will be incorrect without needed fonts and in OPP you can (may be) see some messages
based on
Slovak Characters Appear as Question Marks in XML Publisher PDF Output (Doc ID 1364992.1)
you can see question marks instead of characters

How can I run graphic object on report. ( I got REP-1246 Chart not found)

Hi All,
I made a report that consists a chart object. When I run it on report builder, it works well. But When I call the report from client side, I got "Rep-1246 Char Document not found" . I tried to solve it , I couldn't solve the problem . If I delete chart object from report , then report works well on client side. I didn't use graphics builder to create graphs I used only report builder to do it. I read the threads about it , but I couldn't find the solution. All solutions are about path of graphic file. I don't understand it. Because I only have *.rdf *.rep file. There is no any graph file in my system. I can create it in graphic builder but I don't know how can I deploy the graph object into report layout and run ?
I need urgent help ..
Thanks in advice
Suleyman

Hi again , I used developer 2000. In order to show graphic object on report firstly
I created my graphic object on oracle graph builder.After that I save it like mygraph.OGD . Then I added graphic object on report builder by using graphic object on report builder. When you click the graphic object you will see CHART FILENAME part in part of CHART. In this field , you should add graphic file path that you created on graphic builder. I added mygraph.OGD into this filename part. I worked well.
Good LUck !

Edit Page;Report;Enable CSV Output;Apply Changes;Page Not Found;wwv_flow

Similar Messages

Maybe you are looking for