Sapscript & smartform upgrade issue

Can anyone please let me know the issues faced while upgrading sapscript and smartform in documents like purcchase order,sales order and invoice.

Hi Ch@ndr@,
This seems a strange problem. It is possible that this is simply a problem with the Sapscript buffers. Can you run the report RSTXDELL on the system to clear the Sapscript buffers?
To do this you can use RSTXDELL report with default settings except it is better to have * instead of the current client number in the Client field.
After this, create a new spool and see if the problem is resolved? It will not work to reprint an old spool as the print data is already incorrect.
Regards,
Aidan

Similar Messages

  • Rightfax commands in Sapscript/Smartforms

    Hi,
    We are using RIGHTFAX with SAP ECC 5.0 for fax sending functionality.
    I have read all the threads related to RIGHTFAX functionality but would like to have answers for the following.
    1) Where exactly in a SAPSCRIPT / SMARTFORM form do I add the fax control commands (FCL Commands)so that RIGHTFAX connector for SAP R/3 recognise them?
    For eg: I want RIGHTFAX to include a particular cover sheet.For that I need to write the fax control command RFSAP_FCSFILE:file name. But where do I write that inside sapscript/smartform?
    Thanks,
    Bhaskar Pal.
    This message is not answered.Somehow it is showing as being answered already. I would appreciate your help/input on this issue. Please respond.

    Hi.  First try to set your post as unsolved.  There should be a radiobutton on the left of your post to do so.
    TO answer your questions,  what you need to do is to create a page, this page will be printed first.  Put your FCL commands in this page.  When the document is send to the printer device(the one setup for RIGHTFAX), it will have this coding on the first page.  Once it reaches RightFax,  the software will recognize that there is FCL code on this page and will except it, get the values, apply them, and then it strips off this first page.  This is good because we don't want the end user to see this anyway.  So, create a page in your sapscript called FAXPAGE,  put your commands in there and always start your printing at this page. 
    Regards,
    RIch Heilman

  • Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

    Hi,
    I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
    And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
    1. OBIEE 10g to 11g upgrade issues??
    2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
    3. Informatica 8.6.1 to 9.0.1 upgrade issues??
    4. DAC upgrade issues??
    any response for my questions is appreciated.
    Thanks
    Jay.
    Edited by: Jay on Apr 11, 2012 9:11 AM

    HI Jay,
    We cannot explained thread list here, If you get any errors plz post me,will try to help out.
    This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
    http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
    http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
    Award points it is useful.
    Thanks,
    satya

  • Report generation toolkit upgrade issues

    I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi.  Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore.  What vi's do I need to replace these functions with to make this code work.  Can anyone tell me what the work around is to solving this problem.  This is a picture of the code.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor
    Attachments:
    code.JPG ‏92 KB

    Hi BJD1613,
    The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
    In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.  
    This was reported to R&D (CAR# 123064) for further investigation

  • EHP Upgrade Issue - Java Stack

    Hi,
    Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
    Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
    Error log:
    Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
    JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
    Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
    Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
    Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    I went through the following link , proceeded with option 2, But still getting same error.  
    Portal Upgrade Issue
    Please advise the resolution for the issue I have.
    Thanks in advance
    Regards
    Srinivas
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
    Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

    Issue resolved

  • Upgrade issues list needed

    Hi,
    We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
    Some points i shortlisted are :
    1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
    2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
    3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
    I know there are others. Any help would be appreciated.
    aRs

    Check the below links
    http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
    http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

  • Sapscript/Smartform via mail with PDF attachment: logo is missing

    Hi all
    I'm implementing my function to send Sapscript/smartform via mail.
    I need to do it because when a message needs to be sent, I have to insert the message as attachment but also to add a text in the body mail.
    So I've just created a simple sapscript having a logo (as graphic) and a little text.
    I use the fm CONVERT_OTF to convert the OTF to PDF format and the following code to increase the pdf string from 132 to 255 char:
    LOOP AT t_pdf.
          TRANSLATE t_pdf USING ' ~'.
          CONCATENATE l_buffer t_pdf INTO l_buffer.
        ENDLOOP.
        TRANSLATE l_buffer USING '~ '.
        DO.
          MOVE l_buffer TO l_attachment.
          APPEND l_attachment TO x_attachment.
          SHIFT l_buffer LEFT BY 255 PLACES.
          IF l_buffer IS INITIAL.
            EXIT.
          ENDIF.
        ENDDO.
    All seem to work fine, but as soon as I open the pdf file attached to the mail I can't see the logo
    So after calling fm CONVERT_OTF, I've created a pdf file by method GUI_DOWNLOAD, and then upload this file (by GUI_UPLOAD) into internal table for attachment and send the mail.
    Now really all work very fine, becaus I can see the logo
    Of course I don't want to dowload the file before sending a mail, but I need to send my print directly as pdf attachment
    The two ways seem to be equal, they use the same print and the same functions, only the way to upload the internal table for attachment is different:
    1) tha abap code above to expand the line from 132 to 255
    2) the method GUI_UPLOAD
    So something seems to be wrong in the first way because ithe logo is missing in the pdf attachment generated for the mail
    Max

    Hi
    I'm not working on unicode system, anyway I didn't see that parameter BIN_FILE, so I didn't use it
    I've read the note 1324547 and I've done just as it explaines: now works fine
    I don't know why it doesn't work with old manner (i.e data is treated as character-type), but it worls with the new one (If the data is treated as xstring-type)
    I can only suppose the data are corrupted while being elaborated for expand to 255 char....but I don't why
    Anyway your suggestion works for me
    Thank
    Max

  • SAPScript/Smartform phase out

    Is SAP planning to phase out SAPScript & Smartforms in near future? Kindly advise.
    Thanks,
    Vivek

    Hi,
    Not sure but looks like. Also in my project we are moving to Adobe over smartforms.
    Below link will be of some help
    Re: What SAP recommends in ECC 6. Either SAPSCRIPT or SMARTFORMS?
    Regards,
    Vipul

  • Errors in Forte 3.5 -Upgrade issue

    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

    -----Original Message-----
    From: Venkatesh, Suma
    Sent: Thursday, May 24, 2001 2:39 PM
    To: '[email protected]'
    Subject: Errors in Forte 3.5 -Upgrade issue
    hello ,
    We are having a frequent disruption in the communication SO which has an
    externalConnection Class. Did anything change in 3.5? We did not have
    these errors in 3L!
    After these erros, we have a mutex locking problem which leaves our
    application hanging.
    Any help will be greatly appreciated!
    thanks
    suma
    Here is an Excerpt of the log file
    Task 9: extConn4030a808.Write: 194 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:29
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
    Task 9: extConn4030a808.Write: 233 bytes written to 10
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Error #: [501, 152]
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Thu May 24 09:16:47
    Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
    (partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
    [F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
    "MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
    laxrc2.
    INFORMATION: Error parameters for Set:0 Msg:0:
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Thu May 24 09:16:47
    regards,
    Suma Venkatesh

  • R12 upgrade issue:Not able to login using forms:Please help****urgent

    We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
    We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
    We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
    Any help to resolve this issue will be appreciated.

    Duplicate thread ...
    R12 upgrade issue:Not able to login to forms**please help
    Re: R12 upgrade issue:Not able to login to forms**please help

  • ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

    Hi Basis Expert,
    while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
    Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
    Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
    We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
    Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
    Hope anybody can share a bit your experience on this issue. we try search the note and  find the forum but no luck.
    Thanks

    Hi,
    > 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
    > 2EETG011 "No shadow system""DB-connect not against shadow tables !"
    >
    It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
    Thanks
    Sunny
    Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

  • Print Currency as symbols in SAPSCRIPT/Smartforms

    Hi all,
    My customer want to print currency not as text but as symbols , for example "S" instead of "USD" .
    Does somebody know how to make it?
    Is there a dynamic solution ?
    Best regards.

    Hi
    U should check if in your system there's the currency symbol and if it supports it.
    The other problem can be in the printer, it need to know if it can understand that symbol.
    U can get all symbols available in your system from table TCP01.
    Here the symbol corresponds to a number has to be used in the sapscript/smartform.
    For example Euro sing is 156, so in the sapscript it need to insert <156>, the dollar shoul be 36, so <036>.
    Anyway you can't be sure your device can print the symbol.
    Max

  • Standard sapscript /  smartforms for GOODS RECEIPT

    Hi,
    Can anyone tell me standard sapscript /  smartforms for GOODS RECEIPT
    -John

    Here is your answer from NACE
    Output type WF01 or WF02
    Application ME
    Program SAPM07DR
    Form routine ENTRY_WF01 or WF02
    Sap script: WE_FERT_VERS1 or VERS2 (this is for GR for prod. orders)
    Or
    Output type WE01 or WE02
    Application ME
    Program SAPM07DR
    Form routine ENTRY_WE01 or WE02 or WE03
    Sap script: WESCHEINVERS1 or VERS2 or VERS3 (this is for GR for normal purchase orders)
    I would suggest you use the latest version.

  • Standard SApScript / Smartform name for FB75 (credit memo) transaction

    Need to know Standard SApScript / Smartform name for FB75 (credit memo) transaction..

    hi
    check SPRO>Financial Accounting>Accounts Receivable and Accounts
    Payable>Customer Accounts>Line Items>Correspondence>Carry Out
    and Check Settings for Correspondence
    surya

  • SE78 - Sapscript / Smartform

    Moved to correct forum by moderator
    Ladies and Gentlemen,
    I am investigating graphics upload into SAP for use in sapscripts / smartforms.  The format that I am currently researching is TIFF.  I have previously used SE78 and have had an option to upload a TIFF format graphic directly from the transaction, however on this 4.6C system I only get one type choice - BMP.  Can SE78 be configured somewhere to allow other type uploads and if so where could I find such configuration screens?
    Kind Regards,
    Mantas
    Edited by: Matt on Jan 13, 2009 3:32 PM

    Method 1  If you are in 46c, there is a better method. Save your image in bmp or tiff. Upload using the se78->graphics->bma format. You can load the image as color or monochrome. once done there is undocumented sapscript command /:bitmap, using which it can be printed. See oss note 307414 for documentation of this command.
    Method2 These are the steps to be followed for uploading graphics in R/3 system 
    1.   First save the file as BMP 
    2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and 
          make it Zoom as 100% and save as *.TIFF 
    3.   Open SE38 and execute program RSTXLDMC
    4.   Give your TIFF file path name 
    5.   Select Bcol (for Color) 
    6.   TEXT ID will be ZHEX-MACRO-*. 
    7.   Inplace of * write your own logo name (ZCOMPANYLOGO) 
    8.   Execute the program 
    9.   Now Goto SE71 create your ZFORM 
    10. Create logo window 
    11. Goto text element of logo window 
    Method3
    1.  Goto SE71 Change the mode to GRAPHICAL 
    2.  Choose the Graph Tabstrips
    3.  Now type in some name for the LOGO WINDOW 
    4.  Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP 
    5.  The code will be written automatically. You just need to drag and drop wherever you want
         the graphics to be.

Maybe you are looking for