SAPScript/Smartform phase out

Is SAP planning to phase out SAPScript & Smartforms in near future? Kindly advise.
Thanks,
Vivek

Hi,
Not sure but looks like. Also in my project we are moving to Adobe over smartforms.
Below link will be of some help
Re: What SAP recommends in ECC 6. Either SAPSCRIPT or SMARTFORMS?
Regards,
Vipul

Similar Messages

  • Standard SApScript / Smartform name for FB75 (credit memo) transaction

    Need to know Standard SApScript / Smartform name for FB75 (credit memo) transaction..

    hi
    check SPRO>Financial Accounting>Accounts Receivable and Accounts
    Payable>Customer Accounts>Line Items>Correspondence>Carry Out
    and Check Settings for Correspondence
    surya

  • Two Accounts. No updates for 90 days. How to Phase out one account?

    I now live in Australia. I have always had an iPhone. And when I moved, I had to create an Australian account to get access to my ANZ banking app here. Now I have two accounts that I have purchased apps under. These two accounts coexsisted with minor anoyances for the two years I lived here with my 3GS. But I upgraded to a 4S and started the iCloud experience. It still went fine until I turned on;
    Automatic Downloads in iOS and iTunes
    Now I can't upgrade any apps purchased with my American account. No worries I said. I'll just buy them again with my Australian account and phase out my American account. I'm here for good. Nope. Tried to re-buy after logging in to my Australian account and it forces me to sign in to the account that I purchased it with. What is the fix for phasing an old account out and purchasing just with my one Australian account. Cause I need to update some of these apps to get full iOS 5 compatablilty on some of my American purchased apps. And it says I can't do that now for 90 days.Make sense? Couln't be as easy as merging two accounts. Could it?
    Shayne

    OK, You are right you can't merge. What I have to do is unauthorise my American account on my Macbook Pro in iTunes and repurchase the American apps (that are in Oz) on my Australian account. The part that I couldnt figure out was the authorisation. It would not let me re-purchase an app with my Australian account as it was telling me I already had it in my US account. It will mean some repurchasing but I will eventually get it whittled down to one account and then everything will run smoother.

  • Phase out settings at a higher level such as brand or major customer

    Have any of you ever setup phase out assignments at a higher level than product and had it work correctly?  For example, we want to phase out a brand for a major customer.  In other words, a customer is dropping a brand and we don't want statistical forecast generated for that brand customer combination any longer.  I am able to setup the fields in phase out lifecycle settings for product, brand, major account but when i enter the brand and major account I am still getting forecast generated.  It appears to stop for some products within the brand but not all.  Another example is if a customer quits ordering from us I want to setup the major customer to phase out so no forecast is generated.
    If you have done this successfully please let me know.  Or if you would handle these situations in a different manner other than phase out please let me know.  We can do historical adjustments each period but that is a lot of maintenance to do after each period before statistical forecast is generated.
    Thanks
    Steve

    Hi Stephen,
    Life cycle planning works only at the detail level (each CVC), the option of aggregate planning is helpful if you want to phase in or out a certain CVC when you are forecasting at the aggregate level.
    One option is that you should have all products in the "profile assignment for life cycle " section which falls under that brand and customer. you can maintain a file and then automate the upload process in to the "assignment"
    or
    you can try to use the copy functionality in the realignment (/SAPAPO/RLGCOPY) , where you maintain copy factor as NIL and when the stat fcst is generated, you can use this as the next step to zero out -but you would need to maintain them manually.
    or
    easiest and safest wayy would be create a selection for those combination and do not include them in the planning job for stat fcst.
    or
    you can build a customised program to access the PA, PB, Data view and input the selection to zero out the stat fcst KF for that particular selection after the stat fcst run. here you would need to check if the diaggregated values are good enough.
    hope it helps.

  • Sapscript/Smartform via mail with PDF attachment: logo is missing

    Hi all
    I'm implementing my function to send Sapscript/smartform via mail.
    I need to do it because when a message needs to be sent, I have to insert the message as attachment but also to add a text in the body mail.
    So I've just created a simple sapscript having a logo (as graphic) and a little text.
    I use the fm CONVERT_OTF to convert the OTF to PDF format and the following code to increase the pdf string from 132 to 255 char:
    LOOP AT t_pdf.
          TRANSLATE t_pdf USING ' ~'.
          CONCATENATE l_buffer t_pdf INTO l_buffer.
        ENDLOOP.
        TRANSLATE l_buffer USING '~ '.
        DO.
          MOVE l_buffer TO l_attachment.
          APPEND l_attachment TO x_attachment.
          SHIFT l_buffer LEFT BY 255 PLACES.
          IF l_buffer IS INITIAL.
            EXIT.
          ENDIF.
        ENDDO.
    All seem to work fine, but as soon as I open the pdf file attached to the mail I can't see the logo
    So after calling fm CONVERT_OTF, I've created a pdf file by method GUI_DOWNLOAD, and then upload this file (by GUI_UPLOAD) into internal table for attachment and send the mail.
    Now really all work very fine, becaus I can see the logo
    Of course I don't want to dowload the file before sending a mail, but I need to send my print directly as pdf attachment
    The two ways seem to be equal, they use the same print and the same functions, only the way to upload the internal table for attachment is different:
    1) tha abap code above to expand the line from 132 to 255
    2) the method GUI_UPLOAD
    So something seems to be wrong in the first way because ithe logo is missing in the pdf attachment generated for the mail
    Max

    Hi
    I'm not working on unicode system, anyway I didn't see that parameter BIN_FILE, so I didn't use it
    I've read the note 1324547 and I've done just as it explaines: now works fine
    I don't know why it doesn't work with old manner (i.e data is treated as character-type), but it worls with the new one (If the data is treated as xstring-type)
    I can only suppose the data are corrupted while being elaborated for expand to 255 char....but I don't why
    Anyway your suggestion works for me
    Thank
    Max

  • How to get the line in the template (smartform) with out using under score

    Hi,
         How to get the line in the template (smartform) with out using under score,
         and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
         Please provide the valueble answer as early as possible.
    Thanks,
    Ravi

    Hi Ravi,
    Line -
    Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
    Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
    For Checkbox - refer link
    Re: Quick Question on Smartforms
    Re: putting tick mark into check box in smartform
    Reward points if this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • Print Currency as symbols in SAPSCRIPT/Smartforms

    Hi all,
    My customer want to print currency not as text but as symbols , for example "S" instead of "USD" .
    Does somebody know how to make it?
    Is there a dynamic solution ?
    Best regards.

    Hi
    U should check if in your system there's the currency symbol and if it supports it.
    The other problem can be in the printer, it need to know if it can understand that symbol.
    U can get all symbols available in your system from table TCP01.
    Here the symbol corresponds to a number has to be used in the sapscript/smartform.
    For example Euro sing is 156, so in the sapscript it need to insert <156>, the dollar shoul be 36, so <036>.
    Anyway you can't be sure your device can print the symbol.
    Max

  • Urgent! how to add Warning for Phase out product

    Hi, Can anyone guide soon on how to add a warning message when an Order/Quatation in SAP CRM for phase out product is created so that any sales representive will come to know if total amount/unit defined in the order can be delivered. Reason is to avoid bigger quantity being entered compared to remaining quantity in warehouse.

    Hi Piyush
    You can define a status in the product master.  If you are downloading the product from ECC, you can mention the reason in the material master as "Phase Out Product" and when you download this product in CRM, the status will be shown in Sales and Distribution tab against the field Status.
    If the reason is added, then it will give a error message to the sales representative that the product is blocked or phased out.
    Hope this will be useful
    Thanks and Regards
    DJ

  • Mozilla to phase out non-secure HTTP

    Mozilla has announced its intent to phase out all use of "standard" HTTP, replacing it by the (more-)secure HTTPS.   This involves:
    Setting a date after which all "new" features will be available only to secure websites
    Gradually phasing out access to browser features for non-secure websites, especially features that pose risks to users’ security and privacy....
    The second element of the plan will need to be driven by trade-offs between security and web compatibility.  Removing features from the non-secure web will likely cause some sites to break.
    https://blog.mozilla.org/security/2015/04/30/deprecating-non-secure-http/

    Thank you, thank you, thank you FredMcD!! It was my AVAST anti-virus software. I had the "Web Shield" turned on, so all I did was turn it OFF, so now I can browse on the Internet on any website. When you first install Avast anti-virus, the Web Shield by default is turned on. This really should be turned off as not to freak out new users, especially by those that are not computer savvy. I cannot thank you enough! Take care. :-D

  • Rightfax commands in Sapscript/Smartforms

    Hi,
    We are using RIGHTFAX with SAP ECC 5.0 for fax sending functionality.
    I have read all the threads related to RIGHTFAX functionality but would like to have answers for the following.
    1) Where exactly in a SAPSCRIPT / SMARTFORM form do I add the fax control commands (FCL Commands)so that RIGHTFAX connector for SAP R/3 recognise them?
    For eg: I want RIGHTFAX to include a particular cover sheet.For that I need to write the fax control command RFSAP_FCSFILE:file name. But where do I write that inside sapscript/smartform?
    Thanks,
    Bhaskar Pal.
    This message is not answered.Somehow it is showing as being answered already. I would appreciate your help/input on this issue. Please respond.

    Hi.  First try to set your post as unsolved.  There should be a radiobutton on the left of your post to do so.
    TO answer your questions,  what you need to do is to create a page, this page will be printed first.  Put your FCL commands in this page.  When the document is send to the printer device(the one setup for RIGHTFAX), it will have this coding on the first page.  Once it reaches RightFax,  the software will recognize that there is FCL code on this page and will except it, get the values, apply them, and then it strips off this first page.  This is good because we don't want the end user to see this anyway.  So, create a page in your sapscript called FAXPAGE,  put your commands in there and always start your printing at this page. 
    Regards,
    RIch Heilman

  • Standard sapscript /  smartforms for GOODS RECEIPT

    Hi,
    Can anyone tell me standard sapscript /  smartforms for GOODS RECEIPT
    -John

    Here is your answer from NACE
    Output type WF01 or WF02
    Application ME
    Program SAPM07DR
    Form routine ENTRY_WF01 or WF02
    Sap script: WE_FERT_VERS1 or VERS2 (this is for GR for prod. orders)
    Or
    Output type WE01 or WE02
    Application ME
    Program SAPM07DR
    Form routine ENTRY_WE01 or WE02 or WE03
    Sap script: WESCHEINVERS1 or VERS2 or VERS3 (this is for GR for normal purchase orders)
    I would suggest you use the latest version.

  • Aggregated phase in phase out profile

    I am facing one issue while running forecasting for phase in phase out profile at aggregated or base pack level.
    I have a scenario in which consider base pack level is "A" and under this bas pack are product codes "B", "C" & "D"
    I have assigned phase out profile for product "D" as it is being phase out after certain months and I am executing forecast at pack size level which is "A." After running the forecast I get message from system that "maximum number of periods has been processed which is 52 and phase in phase out profile can not be executed".
    However if I execute the forecasting at product level it carries out the forecast. and runs the phase out profile.
    In the settings for life cycle planning transaction in basic settings I have checked aggregated phase in phase out profile for life cycle planning
    Please inform how this can be resolved.

    Hi Jignesh,
    Did you check the spool list after batch job run, to see if  Phase in/out is appled to the material for which life cycle is assingned. Also I would advice to go and double check all setting is dates are defined correctly etc.
    I would presume you might have done all these, if you still have the issue check notes 1222953 and 1223746 and apply. This should resolve your issue.
    REgards
    siva

  • SE78 - Sapscript / Smartform

    Moved to correct forum by moderator
    Ladies and Gentlemen,
    I am investigating graphics upload into SAP for use in sapscripts / smartforms.  The format that I am currently researching is TIFF.  I have previously used SE78 and have had an option to upload a TIFF format graphic directly from the transaction, however on this 4.6C system I only get one type choice - BMP.  Can SE78 be configured somewhere to allow other type uploads and if so where could I find such configuration screens?
    Kind Regards,
    Mantas
    Edited by: Matt on Jan 13, 2009 3:32 PM

    Method 1  If you are in 46c, there is a better method. Save your image in bmp or tiff. Upload using the se78->graphics->bma format. You can load the image as color or monochrome. once done there is undocumented sapscript command /:bitmap, using which it can be printed. See oss note 307414 for documentation of this command.
    Method2 These are the steps to be followed for uploading graphics in R/3 system 
    1.   First save the file as BMP 
    2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and 
          make it Zoom as 100% and save as *.TIFF 
    3.   Open SE38 and execute program RSTXLDMC
    4.   Give your TIFF file path name 
    5.   Select Bcol (for Color) 
    6.   TEXT ID will be ZHEX-MACRO-*. 
    7.   Inplace of * write your own logo name (ZCOMPANYLOGO) 
    8.   Execute the program 
    9.   Now Goto SE71 create your ZFORM 
    10. Create logo window 
    11. Goto text element of logo window 
    Method3
    1.  Goto SE71 Change the mode to GRAPHICAL 
    2.  Choose the Graph Tabstrips
    3.  Now type in some name for the LOGO WINDOW 
    4.  Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP 
    5.  The code will be written automatically. You just need to drag and drop wherever you want
         the graphics to be.

  • Tracing Phase out Profile

    Hi All,
    Just a quick question...
    is it possible to trace phase out profile i.e (transaction MSDP_FCST1)
    I just wanted to know who has created the phase in/out profile?
    Thanks and best Regards
    Kusum.

    I would suggest moving towards ODI. DIM is basically the Informatica ETL tool and should have similar features / complexity as ODI.
    I have personally used EPM Architect and it mostly works -- the mostly is the gotcha. When something goes awry it can be difficult to troubleshoot and may also result in loss of data. The more complex your application the more likely you run into issues. If I recall maximum formula size for EPMA is 2048 bytes -- planning supports 8192 bytes natively; there is an open defect/enhancement to resolve this.
    If you do go down the route of EPM Architect ensure you are patched to the latest patch levels which can be obtained through Metalink3.oracle.com using your support ID.
    Good Luck,
    -John

  • Items Phase Out Status?

    Hi,
    Is it possible to set an item to phase out, i.e. when the stock has gone then to disable it?

    HI,
    I dont think so,Ricky.We cannot do that but if you have some forecast about stock out,then you can set the date from which it will become ineffective

Maybe you are looking for