SAPSQL_WA_TOO_SMALL errore writing fact table

Hi everyone,
uploading an InfoCube, sometimes (not always!) I get the runtime error <b>SAPSQL_WA_TOO_SMALL</b>. Other times the same upload ends without errors.
I get the error while the program is writing the fact table of the InfoCube (then after update rules!).
Some techinical details: the DataSorce is built on PSA table of 2lis_03_bf and the update mode is 'Full' (there are very few records to upload)
May someone help me to understand what kind of problem generates the error during the upload?
Thank you very much,
Best regards,
Matteo

Hi all,
I resolved this issue by Activating TRFN.
No need to do any thing with the code

Similar Messages

Help Help : Error loading fact table

Hi
I am strugglinh since last 2 days .SSIS is giving me torrid time
I am getting error while loadding the fact table
[Destination Fact Table [1099]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[Destination Fact Table [1099]] Error: The "input "OLE DB Destination Input" (1112)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (1112)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Destination Fact Table" (1099) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Please help
I have already googled for this error and appied whatever tips were given.

What other messages are you getting (warning, errors)?
Does the package fail with the first row inserted in the destination fact table?
One thing you could try is to change the error output of the destination component to re-direct rows in case of an error; then send those rows to place (file/table) where you can take a closer look.

Error Writing Xml Table to the application server

Hi All ,
I am converting a internal table into a XML table using Fm SAP_CONVERT_TO_XML_FORMAT, And then writing it to the application server ,
at the end of the file which is written to application server there are some junk characters .
when i download the same xml table to PC using gui_download there is no problem atr all .
Its only when i using
TRANSFER ls_XMLTAB-data TO lv_filename. i get junk characters at the end and the error on the xml page is
" An invalid character was found in text content. Error processing resource 'file:///C:/Documents and Settings..."
This i guess is due to the line break ,
Any help on resolving would be great thanks
Regards
Vinay Kolla

I would simply suggest to convert xml xstring to binary table, then transfer the file in binary mode. This way you avoid character conversions which might lead to inconsistencies. So you need the following
CALL TRANSFORMATION ...
    DATA ex_tab TYPE TABLE OF x255.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer     = ostream_xml
      TABLES
        binary_tab = ex_tab.
OPEN DATASET dset FOR OUTPUT IN BINARY MODE.
"now transfer ex_tab to dset
Regards
Marcin

Error writing XML Table on application server

Hi All ,
I am converting a internal table into a XML table using Fm SAP_CONVERT_TO_XML_FORMAT, And then writing it to the application server ,
at the end of the file which is written to application server there are some junk characters .
when i download the same xml table to PC using gui_download there is no problem atr all .
Its only when i using
TRANSFER ls_XMLTAB-data TO lv_filename. i get junk characters at the end and the error on the xml page is
" An invalid character was found in text content. Error processing resource 'file:///C:/Documents and Settings..."
This i guess is due to the line break ,
Any help on resolving would be great thanks
Regards
Vinay Kolla

1) Are you asking me to create a folder on Database directory which points to a folder on the Apps server ?I suggest creating an Oracle directory object (a database object) pointing to a real location (folder) on Application server.
we DONOT want a hand shake between the DB Server and the APPS server.I don't see where the problem is.
I'm not familiar with Apps R12 but there's no doubt the two servers are already communicating, at least App server should be able to access the DB for the whole thing to run.
As I said :
One way or another, the data has to make its way to the database, there's no workaround to that.How do you imagine the data will end up in a database table if it doesn't come to the DB server?
There's no magical method out there, both servers have to communicate at some point.
About client-server approaches (client being here the App server), you can read about accessing the XML DB repository in the XML DB Developer's Guide : http://download.oracle.com/docs/cd/E11882_01/appdev.112/e23094/toc.htm
Other option : SQL*Loader can load a CLOB, or an XMLType column too
Edited by: odie_63 on 19 déc. 2011 20:22

OBIEE 11g - No fact table exists at the requested level of detail

My dimesion tables are snow-flake.
Table1 has Key, ProductName, ProductSize, Table2Key
Table2 has Key, ProductDepartment, Table3Key
Table3 has Key, ProductDivision
I have created 2 hierarchies (in same dimension Product). Note: ProductSize is in Table1.
ProductDivision > ProductDepartment > ProductName (shared level)
ProductSize > ProductName (shared level)
There are 2 fact tables
Fact1 is at ProductName level
Fact2 is at ProductDepartment level
When I create a request with columns as ProductSize and some measure; and filter it on ProductDepartment. The request fails with error "No fact table exists at the requested level of detail", but the request can ideally be answered using fact with ProductName level.
I have properly defined logical level keys in the hierarchies and logical level in the LTS (content tab)
Can anyone point me what I am doing wrong here?

Since both fact tables are at same granular level I would suggest to map each other (Signon_A maping Signon_B) in BMM layer logical fact @source.
Considering them as Fact and with fact extension.
BTW: Did you try by setting implicit fact at subject area properties?
Edited by: Srini VEERAVALLI on Feb 1, 2013 9:04 AM

No fact table exists at the requested level

Hi,
I have a 3 dimension tables and D_CANDIDATE, D_QUALIFICATION, D_SERIES. D_CANDIDATE is linked with D_QUALIFICATION and D_SERIES. If i create a analysis with all the 3 dimensions i am getting this error. no fact table exists at the requested level. When i remove D_SERIES from the analysis it is fine. What i might have done wrong. Can anyone help me out please.
Regards,
Natesh

So I'm assuming your joins are like
D_CANDIDATE--> D_QUALIFICATION
D_CANDIDATE--> D_SERIES
Then treat D_CANDIDATE as logical fact in BMM and use reports, it is nice to have default hierarchies for D_QUALIFICATION and D_SERIES. in this case D_QUALIFICATION and D_SERIES are logical dimension tables in BMM
Edited by: Srini VEERAVALLI on Apr 4, 2013 8:05 AM

Result set from two fact tables

Hi,
I have two fact tables, fact1, fact2. These two fact tables share common dimension dimension1.
In RPD I joined dimension1 to fact1, fact2.
In Answers I pulled the columns from fact1, fact2 and dimension1, I am getting ODBC Error, no fact table exists at the requested level..
When I pull the columns from fact1, dimension1 i am getting result.
When I pull the columns from fact2, dimension1 i am getting result.
Please suggest me how to resolve this.
Thanks & regards,
SR

Whether Fact1 and Fact2 are 2 sperate Logical Fact Tables or part of same logical fact tables.
If they are separate logical fact tables then check for the Properties of Logical Table Source - Content Tab and set aggregation level for Dimension 1 hierarchy for respective facts.
Thanks!
Exa-BI

BMM issue for multiple fact tables

Hi All,
I have three facts F1,F2, F2 and two confirmed dimension D1,D2 in my sample rpd.
In BBM layer , I tried to do the modeling as follows instead of creating one logical fact table. There are many fact tables to come
in future.
F1<----D1--->F2<----D2--->F3
When I deploy this sample rpd and run the report from F1 andF2, I get an error No fact Table exists at requested level of detail.
I have not created any hierarchical dimension to set up the content in the fact table.
I am very much thanksful for any advices.
Thanks,
Vishal

Hi,
Please refer the below link.
http://satyaobieesolutions.blogspot.in/2012/07/implementing-multiple-fact-tables-in.html
My suggestion would be bring both the facts to the same logical table sources and have a single fact table in the BMM layer joined with multiple dimensions.
Build a dimension hierarchy for the dimensions and then in the content logical layer mapping, map the dimensions to the fact tables with detailed level/Total
Refer the below link-
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on Jul 26, 2012 7:34 AM

Making fact table

hi,
im having a relationship in the physical layer:
T1--< T2 --< T3 --< FactTable >-- T4
The fact table also has many to 1 relationship to another table which has its own relationships to other tables but the problematic area is here.
I wanted to change this relationship in the business model to be fact table will have many to one relationship to all the table (including T1 and T2) to resemblance a star schema, removing the relationship between T1 to T2 and T2 to T3 (the complete design is much more complicated so im trying to do some muscling to reduce the complexity).
In the business model and mapping layer, i do:
1. Created 2 new column in factTable T1key and T2 key. (obviously no T3 key column needed since fact table already contains that)
2. In the logical source table of the factTable, i added T2 and T3, making the relationship there such as:
factTable - T3: inner join
T3 - T2 : inner join
3. Navigate to the column mapping tab:
- map T1key to t1key (foreign key of T1 table that T2 table contains) in T2 table
- map T2key to t2key (foreign key of T2 table that T3 table contains) in T3 table
4. Navigate to the foreign key tab:
- adding foreign key from factTable to T2 on factTable.T2Key = T2.t2Key
- adding foreign key from factTable to T3 on factTable.T3Key = T3.t3Key
I already has the "flag allow logical foreign key join creation" checked
=> when i try to create new analysis with a column from t1,t2,t3,t4 => error: No fact table exists at the requested level of detail.
This has happened to me before when i dont create the foreign key in the physical layer and doing it on the business model layer..... Im thinking the foreign key i created at step 4 also somehow ignored by BI thus the problem... What am i missing??

I found it very difficult to understand your problem.
Based on what i understood
T1 < T2 = 1:M
T2 < T3 = 1:M
T3 < Fact = 1:M
T4< Fact = 1:M
simplest way to represent this as Star in BMM is
Create a Logical Table T3 with T3, T1 and T2 in the LTS
Create logicla table T4 and Fact
So you will have a perfect star in BMM T3< Fact> T4.
In physical layer it is still going to snowflake T1< T2< T3<Fact>T4 whatever you do.
So I think you are complicating things too much by adding T2 and T3 in Fact logical table.
Hope it helps.

Key Figure units in Fact Table - Error

All -
When a run a report off of a cube, some row display 0 when there are corresponding values in my cube. The report doesn't agree with LISTCUBE. I have ran transaction RSRV on my cube and tested the "Key figure units in fact tables of Infocube" and I get an error saying that 1380 units are missing from fact table.
<b>Diagnosis
In the fact table /BIC/FEU_FRCTS records have been found that contain values other than zero for key figures that have units, but that have no value for the unit of the key figure. Since the value of the unit has to correspond to the value of the key figure, this inidicates an error when the data was loaded. The values of the units have not been loaded into BW correctly. Choose Details to display the incorrect records.</b>
Does anyone know what this error means? How do I solve this problem?
Thanks,
Nyrvole

hi Nyrvole,
as the message said, you have keyfigures with unit but the unit value not filled, click 'detail' as suggested to check which keyfigure(s) involved, that go to rsd2 type in that keyfigure and see which infoobject unit is used, then check transfer/update rules how this unit infoobject mapped, try correct the values and upload again.
there is option 'repair' in rsrv but think in this case it can't fix the error, just try.
hope this helps.

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Can't load data to cubes - same error for all DTPs "exception in substep write to fact table"

Hi Experts,
This initial DTP error is:
Data package processing terminated Message no. RSBK229
Error while updating to target <cubename> (type INFOCUBE) Message no. RSBK241
If I drill down to the specific package in the process monitor the error is: "exception in substep write to fact table" .
No more details for why the error is being generated.
SAP BW 307 service pack 8.
I have run the debugger without success, an ABAPer also ran debug mode to get more details on the error without success
We checked teh termination point and the ABAP stack
No error stack is available
No short dumps
I have reactivated the DTP
The data looks fine
The server crashed the day before the DTPs started to fail
One cube is standard content and the other is a Z version of the same cube.
Please let me know if anyone has resolved this issue before and what steps were necessary.

Hello Russell,
We have got the similar situation and we later found that it was a data issue only.
We tried to enable the error stack, but as the data issue was due to a lookup which is bringing the invalid data, its not captured in the error stack and throwing short dump with the message u mentioned.
so my suggestion, just put a break point if there are any lookups and check the data in internal tables if everything is as expected.
Hope this helps.
Thanks,
Venkata Naresh

Fact table with datetime measure showing #value error while browsing the cube

Hi All,
I have a cube with a fact table having datetime measure.
when I browse the cube, I am able to see the data for all measures except for the measure with the datetime as datatype.
Thanks in advance.

Hi jarugulalaks,
Actually this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To make this issue clearly, would you mind letting us know more information about this issue? Whether it is the VS IDE issue? Which language are you using? Which kind of app are you developing? Maybe you could share us a screen shot about it.
But like this case posted by you here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5/value-error-for-datetime-measure-in-ssas?forum=visualstudiogeneral#bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5
If it is the SSAS issue, please post this issue to the SSAS forum for dedicated support.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error VLD-0917 (unknown error) while deploying FACT table

Hi,
I keep getting this error while trying to deploy a FACT table:
VLD-0917: An unknown error occured while generating <fact table name>.
An unknown error occurred while generating <fact table name>. Error details: java.lang.NullPointerException.
Do yo know what can it be? This fact table was linked to a Dimension that I modified (added one more level to its hierarchy). Since I did this change, the fact table cannot be validated.
This happens to all fact tables that use this dimension. I created a new cube with the new definition of the dimension and had no trouble at all. I disassociate the dimension from existing cubes and they validate OK. What could be happening?
I would appreciate any help you could provide.
Regards,
--oswaldo.
[osantos]

Hi,
I realized that I'm getting this error for all fact tables. I cannot deploy any of them. What could be happening? I have a dimension that is linked to all facts which I changed recently: had to redefine its default hierarchy as a value-based one. I don't know if this affected my cubes.
Any idea what might be happening here?
Best Regards,
--oswaldo.
[osantos]

Error for the fact table while processing the cube - attribute key cannot be found when processing

Please help as I am new to SSAS and this is urgent requirement. This is a MOLAP cube and below is the error that I am receiving when processing the cube. The cube is set to Prrocess Full. Several similar errors are popped up for various dimensions.
"Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'Fact_Table', Column: 'ID', Value: '1'. The attribute is 'Id'. Errors in the OLAP storage engine: The attribute key was converted to an unknown member because
the attribute key was not found. Attribute Id of Dimension: 17 - Ves - PoC Cont from Database: DB, Cube: IPNCube, Measure Group: iSrvy, Partition: Partition1, Record: 1."
Thanks in advance.

Thanks for the recommendations David.
It will be really great if you can clear some of my doubts:
To my information, all the dimensions need to be processed first and then the fact table will be processed.
So if the ID's are not present in the dimension tables, then it should not be present in the Fact table either.
Here we found null values in the dimension table and the ID's were present in the Fact table. What might be the reasons causing such situation?
Also how frequently the cube needs to be processed? Currently the ETL which processes the cube, is scheduled in a SQL Job Agent on hourly basis everyday.
Is there any possibilty that the cube might be under processing state and the SQL job for the next run getting executed trying to access and process the cube while it was still processing?

SAPSQL_WA_TOO_SMALL errore writing fact table

Similar Messages

Maybe you are looking for