SAPUI5 Development Environment Installation Issues

Hi
I am new to this development environment and am experiencing problems installing the Eclipse environment, the way I understand it once I have installed Eclipse I need to install UI5 Team and UI5 Tools packages, I did manage to install the UI5 tools with out to many issues but the UI5 Team will not install and appears to be missing certain components that I have not been able to find. The message I get is below;
Cannot complete the install because one or more required items could not be found.
Software being installed: SAPUI5 ABAP Repository Team Provider 1.6.5 (com.sap.ide.ui5.team.feature.external.feature.group 1.6.5)
Missing requirement: SAPUI5 ABAP Repository Team Provider 1.6.5 (com.sap.ide.ui5.team.feature.external.feature.group 1.6.5) requires 'com.sap.adt.fwk.ci.feature.group 0.20.1' but it could not be found.
Could somebody point me in the direction where I can find a step by step detailed install for Eclipse and all components needed.
Thanks

please have a look at this document
How to install a basic development environment for SAPUI5
or
follow Installation process for SAP UI5 Tools from
SAPUI5 Tools - User Interface Add-On for SAP NetWeaver - SAP Library

Similar Messages

Application Runtime Environment installation issue

Hi,
JDeveloper 11.1.1.3.0
OS: Solaris SPARC
I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
JAVA Version in Solaris SPARC :
weblogic@comm1 ~/Installs $ java -version
java version "1.5.0_24"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
Error:
weblogic@comm1 ~/Installs $ cd Disk112/
weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
Thanks,
Rajesh

Hi,
I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
JDK Version:
WL10/jdk1.6.0_21/bin $ ./java -d64 -version
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
Please advice me on how to resolve this installation issue.
Thanks,
Rajesh
Edited by: Rajesh on Mar 15, 2011 8:28 AM

Siebel Develop Environment Installation

Hello,
I am trying to set up a siebel Develop Environment,
following 3 three products i would like to install:
Siebel tools,
Siebel server,
Siebel client,
But there are so many files listed in the download page of e-delivery site with below 2 content sections,
1,Siebel Business Applications Release 8.0 Translations Media Pack v1
-- Total: 166 files,for multiple Language Extension Pack
2,Siebel Business Applications Release 8.0 Media Pack v3 for Microsoft Windows (32-bit) -- Total: 25
I found Siebel Tools, and Siebel client among the files of this section,
But i am not sure which one is for siebel server , can anyone give direction for download Siebel server?
below is the detailed list of second section,
Download Siebel Business Applications, Version 8.0, Quick Installation Guide B42516-01 332K
Download Siebel Business Applications, Version 8.0, Bookshelf V13792-01 145M
Download Siebel Business Applications, Version 8.0, Third-Party Documentation B34816-01 64M
Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 1 of 3) V19051-01 Part 1 of 3 1.4G
Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 2 of 3) V19051-01 Part 2 of 3 1.9G
Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 3 of 3) V19051-01 Part 3 of 3 121M
Download Siebel Business Applications, Version 8.0, Siebel Tools (Part 1 of 2) V15220-01 Part 1 of 2 1.5G
Download Siebel Business Applications, Version 8.0, Siebel Tools (Part 2 of 2) V15220-01 Part 2 of 2 1.2G
Download Siebel Business Applications, Version 8.0, Siebel Client (Part 1 of 2) V19057-01 Part 1 of 2 1.9G
Download Siebel Business Applications, Version 8.0, Siebel Client (Part 2 of 2) V19057-01 Part 2 of 2 758M
Download Siebel Business Applications, Version 8.0, eMail Marketing Integrated Server B34827-01 26M
Download Siebel Business Applications, Version 8.0, Strong Encryption Pack B34828-01 437M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 1 of 7) B34835-01 Part 1 of 7 146M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 2 of 7) B34835-01 Part 2 of 7 624M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 3 of 7) B34835-01 Part 3 of 7 633M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 4 of 7) B34835-01 Part 4 of 7 683M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 5 of 7) B34835-01 Part 5 of 7 698M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 6 of 7) B34835-01 Part 6 of 7 692M
Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 7 of 7) B34835-01 Part 7 of 7 28M
Download Siebel Business Applications, Version 8.0, ImageCreator Files V19056-01 106M
Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 1 of 4 (Part 1 of 2) V19198-01 Part 1 of 2 286K
Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 1 of 4 (Part 2 of 2) V19198-01 Part 2 of 2 2.0G
Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 2 of 4 V19199-01 2.0G
Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 3 of 4 V19200-01 1.5G
Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 4 of 4
Thanks in advance,
Eric

You will get your server within V19051-01.
THe image creator will generate the setup files from the jar files.
I know this is a large amount of data to download.
Good luck
Evtloglvl

Developer workplace installation issue (access) in Vista.

Hi All,
I am trying to install NW04s SR2 Developer workplace (Max DB,J2EE Engine and Developer Studio) in my Windows vista home premium machine.The SAPinst stops with an access issue while coping some file to c drive.
I did not try switching off the UAC (User account control) and would like to know if some workaround is possible.
Did anyone faced a similer issue and found a solution.
Thanks in advance.
Regards,
Bikram

Vista Home is not supported, it lacks some functionality the kernel needs. You need to use Vista Business (at least).
Markus

SAP Business One Development Environment Installation Error

Hi,
I am having hard time installatin the SDK (B1DESetup_2.1)..
I always get the same error:
The installer has encountered an unexpected error... The error core id 2869.
I am running it on a Windows 7 laptop and I tried to run it as admin and also using the compatibility mode
I do not have SAP B1 installed locally (I do not have any copy of it)
IAt the end, what I want to achieve id to develop an interface module to exchange data between my application and SAP B1 using SAP DI APIs
Tnks for any help
Edited by: erilive on Jun 30, 2010 4:34 PM

Thanks for answering...
The quick story is that we are developping an interface for a customer who have SAP B1 installed...
We do not have SAP B1 installed locally.
We need to develop using this DI API and we will test with the customer SAP B1server.
So at the end, the quiestion is is it possible for me to develop using the interop.SAPBobsCOM.dll API only... I will connect to my customer SAP B1 using VPN...?
Thanks.

MTT Development Environment Installation

I got the complete sources of MTT and want to create a Project with those.
Therefor I used the guide (MBA_MTR_MTS_16_Development_Environment_Installation_Guide.pdf) which comes with the sources.
After all sources are compiled without any error I get an exception when I try to run the project with the runtime environment, as it is suggested in the guide:
Initialize framework ...
Configuration initialized. Installation Base = C:\Programme\SAP Mobile Infrastructure
Path settings adjusted
Timezone initialized; use timezone id 'Europe/Berlin'
Trace initialized. Log is not switched on.
java.lang.RuntimeException: Cannot load conversation ids from persistence
at com.sap.ip.me.core.ConversationIdHandler.load(ConversationIdHandler.java:671)
at com.sap.ip.me.core.ConversationIdHandler.<init>(ConversationIdHandler.java:47)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at java.lang.Class.newInstance0(Class.java:308)
at java.lang.Class.newInstance(Class.java:261)
at com.sap.ip.me.api.conf.Configuration.createInstanceForType(Configuration.java:499)
at com.sap.ip.me.api.conf.Configuration.getSingletonInstanceForType(Configuration.java:444)
at com.sap.ip.me.core.ConversationIdHandler.<clinit>(ConversationIdHandler.java:739)
at com.sap.ip.me.core.FrameworkInitializer.initSingletons(FrameworkInitializer.java:640)
at com.sap.ip.me.core.FrameworkInitializer.initializeFramework(FrameworkInitializer.java:195)
at com.sap.ip.me.core.FrameworkInitializer.main(FrameworkInitializer.java:86)
java.lang.ExceptionInInitializerError
at com.sap.ip.me.core.FrameworkInitializer.initSingletons(FrameworkInitializer.java:640)
at com.sap.ip.me.core.FrameworkInitializer.initializeFramework(FrameworkInitializer.java:195)
at com.sap.ip.me.core.FrameworkInitializer.main(FrameworkInitializer.java:86)
Caused by: com.sap.ip.me.api.conf.FactoryException: Exception while instantiating com.sap.ip.me.core.ConversationIdHandler
at com.sap.ip.me.api.conf.Configuration.createInstanceForType(Configuration.java:503)
at com.sap.ip.me.api.conf.Configuration.getSingletonInstanceForType(Configuration.java:444)
at com.sap.ip.me.core.ConversationIdHandler.<clinit>(ConversationIdHandler.java:739)
... 3 more
Exception in thread "main"

Hi,
U can try to remove the data folder and work folder under MI home directory and try to restart.
best case: try to run project via eclipse
if problem persists u can reinstall MI.
regards
anubhav

WebDB 2.2 & Developer 6i Installation issues

Fellow experts,
I need your help!
I have installed oracle 8i ( Windows NT) in default_home1
I have installed WEBDB 2.2 in default_home2
Both are working great.
After I installed Developer 6i on default_home2, when i try to connect webdb, i get the following error message. Invalid TNS service name. Please change the DAD .
I got the same errot when i installed developer 6i on the new default_home3 directory also.
Do developer6i and WEBDB 2.2 coexist?
please advise.
Thanks
null

Hi,
Yeah, I installed both the products i.e, database and developer in separate directories.
Hassan

(UG1020) SDAccel Development Environment Installation and Licensing Guide

Hi there,
I was wondering if it was possible for me to get hold of the said user guide (UG1020)? The user guide is referenced from within UG1023 (v2015.1).
Thank you,
Kat

SDAccel is in early access and UG1020 is available to early customers. To access the capabilities of SDAccel, please contact your local sales representative.
http://www.xilinx.com/about/contact/sales-offices.html

Serious performance issue with LV 7.1 Development Environment

I'm posting this issue to the forums prior to submitting a bug report to ensure that the problems I'm having are reproducible. To reproduce this bug, you're going to have to be an advanced user with a large project (hundreds to thousands of VIs) as the performance problem is related to the number of VIs loaded.
The issue is the increasingly poor performance of the LabVIEW 7.1 Development Environment as the number of VIs in memory increases. The actions affected include switching between front panel and diagram, saving a VI, copy and paste, clicking a menu, and the mysterious time spent (compiling? editing the runtime menu? changing the toolbar state?) between pressing the run button and when the code actually starts executing. Scrolling and, interestingly, copying via a control-drag are not affected. Running time of entirely on-diagram code does not seem to be affected.
These problems are quite severe and significantly decrease my productivity as a programmer. Since they are development environment UI issues, it's been difficult for me to find a good example VI; the best I can do is the attached "LV Speed Test.vi". It doesn't test the issues that affect me most, but it seems to suffer from the same problem.
This simple VI just shows and hides the menu bar 100 times in a tight for loop. When it is the only VI loaded, it executes in about 350 msec on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a single project-encompassing VI (let's call it the "giant") that references a total of about 900 user and VI-lib subVIs, the test routine takes almost a minute and half to run...about 240 times slower! I've tried this on my laptop with similar results.
The problem appears to be related to the *number* of VIs loaded and not the memory utilization. For example, if I close the "giant", and create a new VI ("memhog") that does nothing but initialize a length 20,000,000 array of doubles and stores it in an uninitialized shift register, LabView's overall memory usage (as shown in the task manager) jumps enormously, but LV Speed Test executes in about 450 msec...only slightly slower than with a fresh copy of Labview.
The problem seems to be related to excessive context switching. The Windows task manager shows over a thirteen hundred page faults occur when "LV Speed Test" is run with the "giant" in the background, versus zero or none when run by itself or when "memhog" has used up 160+MB of space.
The problem only seems to affect the frontmost window. (Unfortunately, that's where we LV programmers spend all of our time!) If you start "LV Speed Test" and then put "giant" in the foreground "LV Speed Test" runs much faster. In fact, if you use the VI server to put the "giant" VI in the foreground programmatically at the start of "LV Speed Test", execution time drops back to 450 msec, and there are no page faults!
These results show the issue is not related to video drivers or the Windows virtual memory system. My suspicion is that there is a faulty routine in LV 7.1 that is traversing the entire VI hierarchy every time certain events are thrown in the foreground window. It could be due to a problem with the Windows event tracking system, but this seems less likely.
I have been programming LV for about 7 years and switched from LV 6.1 to 7.1 about four months ago. I know NI engineers have put thousands of hours developing and testing LV 7.1, but honestly I find myself wishing I had never upgraded from using LV 6.1. (To whomever thought "hide trailing zeros" should be the default for floating point controls...what were you thinking?!)
I know each new version of LabView causes old-timers like me to grouse that things were better back in the days when we etched our block diagrams on stone tablets, etc., and honestly I'm not going to go back. I am committed to LabView 7.1. I just wish it were not so slow on my big projects!
Attachments:
LV_Speed_Test.vi ‏22 KB

Hi,
I can confirm this behavior. Setting the execution system to "user
interface" helps a bit, but there is still a big difference.
I get a feeling it has something to do with window messages, perhaps
WM_PAINT or something, that is handled differently if a VI is not
frontmost... But what do I know...
Don't know if it should be called a bug, but it sure is something that could
be optimized.
Regards,
Wiebe.
"Rob Calhoun" wrote in message
news:[email protected]...
> I'm posting this issue to the forums prior to submitting a bug report
> to ensure that the problems I'm having are reproducible. To reproduce
> this bug, you're going to have to be an advanced user with a large
> project (hundreds to thousands of VIs) as the performance problem is
> related to the number of VIs loaded.
>
> The issue is the increasingly poor performance of the LabVIEW 7.1
> Development Environment as the number of VIs in memory increases. The
> actions affected include switching between front panel and diagram,
> saving a VI, copy and paste, clicking a menu, and the mysterious time
> spent (compiling? editing the runtime menu? changing the toolbar
> state?) between pressing the run button and when the code actually
> starts executing. Scrolling and, interestingly, copying via a
> control-drag are not affected. Running time of entirely on-diagram
> code does not seem to be affected.
>
> These problems are quite severe and significantly decrease my
> productivity as a programmer. Since they are development environment
> UI issues, it's been difficult for me to find a good example VI; the
> best I can do is the attached "LV Speed Test.vi". It doesn't test the
> issues that affect me most, but it seems to suffer from the same
> problem.
>
> This simple VI just shows and hides the menu bar 100 times in a tight
> for loop. When it is the only VI loaded, it executes in about 350 msec
> on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a
> single project-encompassing VI (let's call it the "giant") that
> references a total of about 900 user and VI-lib subVIs, the test
> routine takes almost a minute and half to run...about 240 times
> slower! I've tried this on my laptop with similar results.
>
> The problem appears to be related to the *number* of VIs loaded and
> not the memory utilization. For example, if I close the "giant", and
> create a new VI ("memhog") that does nothing but initialize a length
> 20,000,000 array of doubles and stores it in an uninitialized shift
> register, LabView's overall memory usage (as shown in the task
> manager) jumps enormously, but LV Speed Test executes in about 450
> msec...only slightly slower than with a fresh copy of Labview.
>
> The problem seems to be related to excessive context switching. The
> Windows task manager shows over a thirteen hundred page faults occur
> when "LV Speed Test" is run with the "giant" in the background, versus
> zero or none when run by itself or when "memhog" has used up 160+MB of
> space.
>
> The problem only seems to affect the frontmost window. (Unfortunately,
> that's where we LV programmers spend all of our time!) If you start
> "LV Speed Test" and then put "giant" in the foreground "LV Speed Test"
> runs much faster. In fact, if you use the VI server to put the "giant"
> VI in the foreground programmatically at the start of "LV Speed Test",
> execution time drops back to 450 msec, and there are no page faults!
>
> These results show the issue is not related to video drivers or the
> Windows virtual memory system. My suspicion is that there is a faulty
> routine in LV 7.1 that is traversing the entire VI hierarchy every
> time certain events are thrown in the foreground window. It could be
> due to a problem with the Windows event tracking system, but this
> seems less likely.
>
> I have been programming LV for about 7 years and switched from LV 6.1
> to 7.1 about four months ago. I know NI engineers have put thousands
> of hours developing and testing LV 7.1, but honestly I find myself
> wishing I had never upgraded from using LV 6.1. (To whomever thought
> "hide trailing zeros" should be the default for floating point
> controls...what were you thinking?!)
>
> I know each new version of LabView causes old-timers like me to grouse
> that things were better back in the days when we etched our block
> diagrams on stone tablets, etc., and honestly I'm not going to go
> back. I am committed to LabView 7.1. I just wish it were not so slow
> on my big projects!

11g Reports Development Environment, Run Web Layout Error

Hi,
I'm using
Operation System: Windows 7 32 bit
Jdk: jdk1.7.0_07
Weblogic Server: 10.3.6
Forms and Reports: 11.1.2 Development Environment.
When I'm trying to run report in web layout, it gives error
java.lang.NoClassDefFoundError:
Javax/servlet/jsp/tagext/TagLibraryInfo
Kindly help me to resolve this error
Thanks
Edited by: Sadiq Ali on Oct 3, 2012 11:08 PM

Hello,
First, JDK 1.7 is not certified with Forms 11gR2. Only JDK 1.6 familly is certified and supported.
It seems to be an environment/installation issue as this installation works fine.
- Are you installing as Admin user and running Builder as the with the same OS user?
- Let me know the WLS 10.3.6 complete zip file name you installed and the command you used to install it. Also the 11.1.2 file names for review
As a workaround:
You can open rwrun.jar in Jdeveloper and check the classpath in the manifest.
I remembered i had an issue on this(11.1.1.3 version) when rwrun.jar called a jar file javax.jsp_1.1.0.0_2-1.jar that did not exist in the installaton(There was a newer version like javax.jsp_1.2.0.0_2-1.jar in the installation).
Normally should not be happening in 11gR2, but give it a try.
Regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Windows 10 Enterprise Edition: Installation and Development Environment Essentials: Thoughts & Assistance Req:

Hello,
I am in the architecture planning stage of my project and seeking personal and general good advice from Mircosoft engineers. I am laying the foundation stones of a new development product using at least three more new technologies that are
as new as Windows 10. Their are also around four or five technology partners with the latest version of their software that I wish to take onboard. Due to the sensitive nature of the project it is not wise for me to state each piece of technology used,
so I will be as accurate as possible using the limited means I have.
I wish to make a "closed" development environment, with the latest build (currently 9860), install the new software. Some of which installs fine, some of which is not compatabile with Windows 10. Regarding the latter I am in discussions with the
technology providers to make a work-around and hammer and chisel through every issue. Very soon I hope to have a fully stable working development environment which paves the road to a first prototype. So i need to make a decision soon to "lock
down" everything. I will miss Windows 10 updates but the advantage is when the project vertical slice is complete, the feedback and benefit will be larger for Windows 10 final product.
This is probably my fifth or sixth early evaluation of the Windows platform and I am aware of the highs and lows of working with various versions using new builds, from the stability of win98 (becoming 2000 - minus millennium 1999 edition), to the quick uninstall
of vista (it broke our internal projects). The solid bedrock of Windows NT (becoming XP) and so on. The good news is Windows 10 seems very good indeed.
My questions are two:
1) Would the windows team recommend a closed environment development in my situation, and are they aware of other developers doing it (is it wise from your end)? Is their a pool, can we communicate directly?
or
2) Would you recommend an open environment instead? Every install is updated, everything is all on-line and networked, this may lead to more breakages and sacrifice the finished product.
The problem with approach number 2 is that a particular technology may work with this build, but not the next one and vice versa. I will constantly be playing "bunny hop" trying to make it work.
The problem with using number 1 is that you can have a "false dawn" view of the project, meaning you have managed to get it stable and develop code that fits that environment and build, but as soon as you do update six months later, it breaks due
to feature change, it means massive re-work, ultimately breaking the product again.
I have seen these approaches drown larger projects and wash away whole development teams.
Its a tough one and a part of my R&D but very soon I need to make a decision.
To explain more, some of the technology used will be:
Windows 10 Enterprise - Perforce - Office 365 with Exchange Activ Synch - Any associated Intel CPU and GPU monitors.
In other words very stable and solid technology. Their is about an equal number of other techs that are not so stable but I am slowly getting to work under Windows 10.All feedback would be given to Microsoft, regardless of environment 1 or 2.
Any advice and help from the Microsoft Team is greatly appreciated.
Yours Kindly,
Asad

I recently went to an Enterprise Mobility Summit Microsoft was holding at one of their facilities, and they spoke a bit about the future of Windows 10 - and here's what I left with: Microsoft isn't really sure themselves what kind of updating scheme they're
going to be doing with Windows 10. They had some ideas, but they're looking for feedback from enterprises and engineers about their plan.
I don't think it was under an NDA, so I should have no problem discussing it: their idea was to have different tracks (based on the user) with different upgrade schedules based on what the administrator deems appropriate for that user. For instance,
a consumer would have their OS automatically updated as soon as the update was available. while enterprises could stagger their users to a more manageable 3-month or 6-month schedule. Microsoft wasn't sure how long to make this stagger schedule - talk
of a 1 year stagger were floated, but nothing concrete. Critical devices, like POS or ATMs, could be setup so they would never be upgraded, or only upgraded when the administrator specifically allows them to be upgraded.
For you personally, it sounds like a closed development environment is better, since you're testing critical business applications. Again, one never knows exactly what direction Microsoft will take, but with the amount of conversations and...
warnings that dropped by various people at this meeting, it's pretty safe to say that they'll be some sort of timed release schedule for enterprises that you can prepare for.
Hope that helps!

Correctly setting up a C++ development environment with clang++

I'm going to reinstall Arch x64 soon, as the current installation was not done properly, and I have some doubts on how I should set up my development environment correctly.
My compiler of choice is clang++ 3.4 SVN and my IDE of choice is QTCreator git.
I currently get and install those manually, but I may use the AUR in my next Arch installation.
Anyway, the issue is that QTCreator and other applications use /usr/bin/c++ by default, which is g++.
To solve (horribly) the issue, I changed my /usr/bin/c++ to an executable bash script that fowards the arguments to clang++.
This lead to issues such as warnings and errors not being catched by the IDE.
My question is: what is the correct way to set up a clang++ development environment?
How can I set clang++ as the default compiler for everything except AUR packages?
If you use clang++ as your main compiler, how did you solve this issue?

The canonical method of setting your (C++) compiler is to set the CXX environment variable.
Searching Google for "qtcreator compiler" yields things like: https://qt-project.org/doc/qtcreator-2. … hains.html

Getting Data Direct license error on Development Environment setup

Using .NET portal G6 sp1
 
I have setup UI development environment. But I am getting datadirect license error on Debug->F5 in Visual studio.
 
I get Database connectivity error. I checked PT config manager. It showed connection was good.
 
Looking at PTSPY I found thus error:
 
Error OpenKernel.Database .NET #1938 com.plumtree.openkernel.impl.db.DatabaseService Exception acquiring database connection
System.InvalidOperationException: The DataDirect ADO.NET Data Provider you are attempting to use is not licensed. If you would like to license a provider, please call 800-876-3101 or visit DataDirect at www.DataDirect-Technologies.com. at DDInt.License.LicFile.UnlockProvider(String licFileName, Int32 version, LicProviderType providerType)
at DDInt.Common.CommonConnectionImpl.Open()
at DDTek.SQLServer.SQLServerConnection.Open()
at com.plumtree.openkernel.impl.db.DatabaseService.GetConnection() in e:\buildroot\Release\openkernel\2.0.x\opendb\build\x86\src\csharp\com\plumtree\openkernel\impl\db\DatabaseService.cs:line 1066
 
Has anyone seen this error before?

Thank you for posting this response. This hit me last year and I could not for the life of me remember what we did to address this. Your note saved me gobs of time :)
In that spirit... I'm including some notes we made on seeing this sort of error on the remote tier when using the native API (installing the automation server on the remote tier so the API is accessible to our native portlets). Ideally someone else finds value in this.
P.S. - ignore the preachy/information tone on bits of this. It's written for our internal documentation, so I had to do it up all classy-like :P
Error: "Datadirect license file not found at configured location: [license file directory goes here]\DDplm.lic"
This error will occur if you use certain portions of the native API on the remote tier. When you use the native API you typically install the "automation server" (job processing server) - this is more appropriately thought of as a "light" portal install where the underlying portal logic / process libraries are installed and registered on the server, but the user interface portions are not available (EX: no web interface).
When you install the automation server and portal cross-platform database libraries are installed to abstract out behavior specific to MS SQL, Oracle, etc. The automation server installer does not, however, install 100% of the files used by the portal - specifically, the license file(s) required by this cross-platform database library.
To resolve this issue you must do two things.
=========================================================
1. Copy the license files from the portal to the automation server
=========================================================
* "Share" or terminal service over to a portal server. Navigate to the following (or close to it) directory path to find the license files generated by the portal installer.
\\MyPortalServer\d$\Program Files\plumtree\ptportal\6.0\bin\
* Find the folder "assemblies" and locate the file "DDplm.lic"
* Copy the "assemblies" folder to your automation server, matching the path/location
EX: \\MyAutomationServer\d$\Program Files\plumtree\ptportal\6.0\bin\
* You should now have the following folders/files installed on your automation server
\\MyAutomationServer\d$\Program Files\plumtree\ptportal\6.0\bin\assemblies\DDplm.lic
=========================================================
2. Update the automation server config file to point to the DDplm.lic file
=========================================================
Now that you have the appropriate license file copied to your automation server you must reference it within the core automation server config file. Recall that the automation server is really just a subset of the portal - the paths will then make more sense
* Navigate to your automation server's core configuration file
\\MyAutomationServer\d$\Program Files\Plumtree\settings\common\serverconfig.xml
* Open this file and find the entry for "database-connection:adonet-license-file-directory"
<setting name="database-connection:adonet-license-file-directory">
 <value xsi:type="xsd:string">[license file directory goes here]</value>
</setting>* Update the "serverconfig.xml" file to include the local absolute path to the folder that contains the license file ("DDplm.lic") you copied over in step (1). Your final entry should look similar to the following:
<setting name="database-connection:adonet-license-file-directory">
 <value xsi:type="xsd:string">D:\Program Files\plumtree\ptportal\6.0\bin\assemblies\</value>
</setting>
=========================================================
3. There is no step 3
=========================================================
That should be it.

FRM-18103 failed to initialize the development environment

OS: windows 7 ultimate
Just installed Database 11gR2 and Oracle Developer Suite 10g (10.1.2.0.2) in different homes.
When starting forms builder i get the error:
FRM-18103 failed to initialize the development environment.
Starting OC4J instance didn't make any difference.
Can anybody help please?

First and foremost, Oracle Developer Suite (ODS) 10g R2 is not certified by Oracle for Windows 7. That doesn't mean it won't work, it just means if you have a problem, you will have a hard time getting support from Oracle since they do not support ODS 10g on Windows 7.
Now that I've gotten that out of the way, how did you install ODS? Did you need to follow the instructions for installing ODS on Windows Vista - which is supported. The basic steps are:
1. Manually set the Virtual Memory - the Oracle Installer can't detect the VM when it is managed by Windows.
2. Right-Click the setup.exe and choose Properties -> Compatability and check "Run the program in compatibility mode for: Windows XP" check box.
3. While in Properties - check the "Run this program as an Administrator" check box.
If you didn't perform these three steps, you will need to uninstall and reinstall. It is also highly recommended that you install ODS patchset 3 as well (version 10.1.2.3.x).
FRM-18103 failed to initialize the development environment.Most likely, this is an OS permissions issue. After installation, right-click the DevSuiteHome_10g folder, choose properties and Security. Check the group privileges to ensure that ALL Users have Full Control on the directory and all subdirectorys.
Also, IE8 does not support Oracle Jinitiator so you will need to install the Sun JRE 1.6.0_16 or higher to be able to run forms from the Forms Builder.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Dec 15, 2010 9:01 AM

To create local development environment

Hi,
I have to create local development environment
there are two options:
1.Embedded pl/sql gateway
2.oracle xml db http server
*1.How to know the setup what i am using to create local development environment???*
after knowing the setup:
*2.How to configure??*
http://hostname:port/apex/apex_admin... for embedded
or
http://hostname:port/pls/apex/apex_admin....for oracle xml db
from the tutorial i couldn't understand.
for example apex is define in configuration file???..how to find???
I am stucked.

Hi,
Thanks for your suggestion.
To work further I tried ot download the packaged applications OEHR sample objects.
I didn't get any error till downloading and importing, when i installed supporting objects it says there is no enough workspace to install supporting objects
error is
the following prerequisite checks failed. Installation of this application's supporting objects cannot continue until these issues are resolved.
To continue installation after addressing the errors, navigate to the Supporting Object Definitions of this application and click INSTALL in the Supporting Objects Installation section.
Alternatively, you can deinstall the application definition and reinstall after resolving these issues.
Available Space in KB:      4,032
Object Names:      OEHR_COUNTRIES, OEHR_REGIONS, OEHR_LOCATIONS, OEHR_DEPARTMENTS, OEHR_JOBS, OEHR_JOB_HISTORY, OEHR_CUSTOMERS, OEHR_WAREHOUSES, OEHR_ORDER_ITEMS, OEHR_ORDERS, OEHR_INVENTORIES, OEHR_PRODUCT_INFORMATION, OEHR_PRODUCT_DESCRIPTIONS, OEHR_PROMOTIONS, OEHR_CATEGORIES_TAB
I have created local environment
workspacename: SECOND
username:ADMIN
I had glimpse on requesting additional storage space from the link
http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/wrkspc.htm#AEA
This is the report what i got in viewing workspace overview report:
Tablespace Name     Bytes     Amount Used     Amount Free     Percentage Used
FLOW_1172117675391573     116,326,400     6,356,992      109,969,408     5.46 row(s) 1 - 1 of 1
Then i requested additional storage option from Manage services
Then i connected to workspace:INTERNAL
and username:ADMIN then i passed to change request option and accepted the option
WorkspaceSort by this column     Requested Change     Value for Change     Requested     Requested By     Status     Action
SECOND     Request Storage     100     83 seconds ago     ADMIN     Requested     View Request
got a message :space added
what i am doing is right or wrong???
still i am getting same error..
how to proceed???
my task it need to add supproting objects for oehr_sample
Thanks for your time

SAPUI5 Development Environment Installation Issues

Similar Messages

Maybe you are looking for