Save A Copy Command

I've got an indesign files which is over 200MB, I used the "save a copy" command and the file size has reduced to 70MB, can anyone tell me why that happens? Thanking you!

> which you could have used Undo to step backwards with...
Not part of the file.
Saving a 200 MB or larger file, especially over a network, can take a while and force you to pause, maybe up to a minute, when saving. Not only is that annoying, it's a disincentive to sae, which can be much worse than annoying. So InDesign saves your changes to the file, which are usually a very small amount of data relative to the file size. Save As when you're done with the file to get he size down.

Similar Messages

Disable "Save a Copy" in Adobe Reader using OLE

Hi!
Does it possible to disable Save a Copy command in embedded Adobe Reader?

Hi Bernd,
I have the same problem... There is any way do this ? ( disable Save a Copy )
Thanks
Marcos

"Could not save a copy because the file is already in use..."

I have read previous discussions of this issue, but nobody suggested a solution. Sometimes when I use the Save As command to save an open file with the same name as an existing Photoshop file that is not currently open, I get the dreaded message: "Could not save a copy because the file is already in use or was left open."
When this happens, I have to save my open file using a different filename, then change the name in the Finder after manually deleting the original file with that name. This happened occasionally in Photoshop CS3, and is now happening more frequently in CS4. If no one can offer a solution, can someone please tell me if there is a way to officially submit a bug report? The simple truth is that Photoshop costs way too much for a well-known problem like this one to be hanging around version after version. Adobe really needs to fix this and I'd like to tell them so. Thanks!

alansky1 wrote:
Adobe really needs to fix this and I'd like to tell them so.
I've run into this and I'm convinced it's not Adobe. Whenever I've gotten around the problem it's often something from Apple that got in the way.
I use a simple workaround when Finder/QuickLook isn't letting go of the file. First use a free utility like TinkerTool or Onyx to turn on the Quit command in the Finder. Whenever the Finder gives you trouble, if closing the Finder window in question doesn't solve it, just do the ol' Command-Q. It's a little faster (and maybe safer?) than force-relaunching the Finder. This usually releases files for me when all else fails; it also often cures the annoying "can't eject the volume because it's in use" messages when you've already quit every program you can find.
There's the question of why Photoshop and not others; I'm not an engineer but I think the sheer size of Photoshop files is a factor. In one instance I noticed that quicklookd was using a lot of RAM, and QuickLook has been implicated by an earlier post in this thread. It isn't unusual for a Photoshop file to be very large compared to other types of documents. It's possible that when QuickLook hits a large Photoshop file, and it does its normal thing of generating a big preview for it, it could get tied up reading that huge image long enough to block another program. Sometimes it seems like QuickLook just hangs on them. When it happens, you can try looking at Activity Monitor to see if something like QuickLook, Spotlight, or some other program is using an unusual amount of CPU or RAM.
Apple Mail (at least in 10.5) is another major offender by the way. If you attach a file to Apple Mail it will hang on to it as "open" even after you remove the attachment. Other programs will not be able to write to the file that was attached or formerly attached. Nothing short of quitting Apple Mail will make it let go of the file. You'll notice it when you delete a JPEG, PDF, Word doc (definitely not just Photoshop) attachment because you realize you need to make a change and attach it again. Attempting to export an updated one over the old one is blocked until Apple Mail is quit.
In my experience I think what Chris says is true.

COPY command replacement

Given that the COPY command is now deprecated (and clearly documented in 10gR2 - sqlplus user's guide that it will be obsoleted in future releases of SQL*Plus, will there be any replacement command in sqlplus?
We were planning to use it to implement for our simulation model - but given it is deprecated and does not support new data types, we are forced to look for alternatives. What are the alternatives for a local area network or copying data between two oracle accounts using different tablespaces on the same db server?
Pro*C/Direct Path Load,
expdp/impdp,
copy over dblink and then recreate the constraints and indexes,
which one will be faster, should be used based on the following?
What we want to do is to checkpoint (save) historical game data, and if required/necessary, be able to bring back the data from a saved game checkpoint X, where X can be any number (checkpoint 4 or 20, etc). We also want to hold onto the saved game checkpoint files so that we can take it to another place for after action review purposes.
Any input is appreciated.
regards.

copying data between two oracle accounts using different tablespaces on the same db server?For this I would grant SELECT on the table to be copied to the target Oracle account and use CREATE TABLE ... AS SELECT ... and recreate constraints and indexes.

About adobe voice....how can I download my video and save a copy in my pc?? help me please!!

(english): I made a video with adobe voice in my ipad mini. I sent by email to my boss, but he needs to save a copy in his pc and he doesnt know how can do this.
español: Hice un video con adobe voice en mi ipad mini. Lo envie por email a mi jefe, pero el necesita salvar una copia de ese video en su pc y dice que no sabe como hacerlo pues creo que el programa no se lo permite.

You've added the music to your computer's iTunes library (File > Add To Library) that you want to sync to the iPad ? If you have then you should be able to select the iPad on the left-hand sidebar of your computer's iTunes (if you have iTunes 11 then you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and then use the Music tab on the right-hand side to sync the music to your iPad (if there are downloads on your iPad that aren't yet on your computer's iTunes then you may want to copy them over first via File > Devices > Transfer Purchases).
Syncing Music : http://support.apple.com/kb/HT1351

Copy Command in ABAP report

HI Gurus,
I have a ABAP report - basic list, with lot of batch data on it. based on the report they will copy the batch numbers and paste in standard transactions.
Users complaining to do a Ctrl + Y and then Ctrl + C then Ctrl + V to paste the batch numbers.
Is there anything we can do programatically using hot sopt on batch numbers so we get the selected BATCH and execute copy command programatically when they click on BATCH number on basic list.
All they need to do is Ctrl + V on standard transactions.
Is there anyway to achieve this?
Thanks Giri

Giri - you would probably get more results if you mark this as a question. That way you can assign po1nts to helpful answers.
In any event why don't you just do a CALL TRANSACTION when the user double clicks on a line?
Rob

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

Script for using layer name in Save for Web command

I am using the Save for Web command (Illustrator CS2) to export layers to CSS so that each layer is saved as a different jpg. The only issue I have is that I want the layer name to be part of the file name, but layer name is not an option when I look at the "Edit Output settings" dialog for saving files. Is there anyway I can do this? I do not have experience writing or working with scripts.
For example. My fiel name is flower.ai. I will have 20 different layers (each containing a different color of the same image) and want the exported file to be flower-scarlet.jpg, flower-cranberry,jpg, etc. Right now I am looking at renaming all the files manually, but as I am creating 40 images per product on my website, this will be very time consuming.
Thanks in advance
Christine

Btw.. to make it work for JPGs, change the PNG options to the following:
var options = new ExportOptionsJPEG();
        options.antiAliasing = false;
        options.optimization = false;
        options.artBoardClipping = true;
        options.qualitySetting = 100; // value of 0 to 100, 60 is medium, 100 is perfect
        options.blurAmount = 0;
        options.verticalScale = 100;
        options.horizontalScale = 100;

MS Word: This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box.

This is not a question. I believe I've found a new issue and the fix for it.
The situation:
A brand new iMac 27" running Yosemite 10.10.1
MacMini server running 10.8.5 server.
The issue:
Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
The issue is unique to this computer in an office of 10 client computers and three servers.
Attempted fixes:
Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
Repaired permissions on the client and the network share.
Definitive fix:
By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
I hope this helps someone else.
Rob

That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

How do i save a copy of my emails on the server on a macook pro? I am having a problem when using hotmail on my new macbook, they say it is set pop3? i have not idea what this means!

I am not very good on computers and need help, I have lost past history emails when i have used hotmail on my new macbook, they say it is not set right but i do not understand! they say I need to ensure the box 'save a copy to the server' is ticked but they can not help me locate this and I have no idea what to do, can anyone talk me through this please?

Check your mail preferences. The example below is from the mail app that comes with mac. In my case I'm using yahoo mail which is a POP3 account. POP stands for post office protocol which is the set of rules used by a POP mail account to transfer mail. You can learn more about it here if interested. If the box below is checked, all the mail will be downloaded to your computer when you check your mail using the built in mail app and removed from the mail server. Here is another page to help you set up your hotmail account for use the the mac mail application. Hope this clears things up.

I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
Rodney
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

silkman1
I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
know if I am misinterpreting anything that you have written.
You have a video created in Windows Movie Maker.
How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
But, the pan and zoom effect is not seen in playback of the export.
Is all of the above correct so far?
If so....we are going to need some more details from you...
a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
Position (for Pan) in the Motion Panel expanded?
c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
so that we are in sync to resolve the issue.
Thanks.
ATR

I need to able to print a pdf that is locked. It has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this?

The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this? HELP!

Sorry I thought was just a one off, it would be no use for large volumes.
Do you not have this avaiable in the print menu in Preview with these documents?
I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason.

Copy command not working for Search Results

Hello,
We have a Search Form that triggers a TREX URL search. We also add a custom Layout Set on the search URL. (see URL below)
<b>URL Search:</b>
http:
<server name> &ConfigFileName=Navigation.xml&layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=ctrlpers&QueryString=*&rndLayoutSet=CustomLayoutSet&SelectedMatchesPerPage=15&SearchVisible=false
In the custom Layout Set, we've made our own UI command group to include the following commands: Search_from_here, details, copy, move etc
The problem is that whenever we click on the 'Copy' or 'Move' command of a resource, we get the following error message:
=====================================
Item not found
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
======================================
The error message in the KM log files simply states "ERROR: RID not found".
Would anyone know how to fix this issue! I've tried many layout sets, but the copy command always gives me the same error message!
Any help or suggestions on this would be much appreciated...
Thanks,
Harman

Hi Harman,
yes, this is a known issue.
It's fixed with NW04 SPS 13.
Regards Matthias Röbig-Landau

How To Save Jpeg Copy As Action

Hi - how do I create an action that saves my open image as a jpeg copy in the same directory as the original? Rather than save as export I am doing a straight 'Save As...' and then selecting the jpeg option. When you do this the 'save as copy' is greyed out. If I 'Save As..' but before changing to jpeg, whilst it is a PSD file I can select 'save as copy', then select the jpeg option. Whilst the box is greyed out it is still ticked. However it still does not save as a copy, but overwrite the original.
Any clues? Using CS5.

Hi.
You can also use the keyboard shortcut Alt+Ctrl+S (save as copy) when recording the action to add copy to the name.
There's an obvious one I missed. This solves a problem lurking in the action. Duplicate preserves the original name (plus "copy"). But the Save dialog will open to the spot recorded in the action. Not the source document folder. You might have to navigate to the right folder. So in this statement,
The file should be saved to the same folder...
needs a small correction. Change "should" to "probably won't".
Using "Duplicate" severs the ties between the original document and the copy. Alt+Ctrl+S retains that link and the Save dialog opens the right folder. If your Save step isn't conditional, the new file will be named Original Name plus "copy.jpg". So the action gets really simple.
1. Ctrl+Alt+S. With Format set to Jpg.
Thanks, MTSTUNER.
Peace,
Lee

Why does PS CS5 (12.0.4) write to original file when I 'save as copy'?

Here's the scoop: I open a PS file. I chose 'Save As' but uncheck 'Show Layers' in the dialog box. So now it's essentially a 'Save A Copy'. When the new file is saved the original file is written to (although nothing changed) and now has the same modification date as the 'Save A Copy' file. Super strange and causing issues. Because if one flattens or does anything to the original file, those changes are baked into the original file!
Any ideas? Thanks, in advance.
Mac OS 10.7.3
iMac i7 3.4GHz
32 GB RAM
256GB internal SSD (scratch disk)
1 TB internal SATA (system/data disk)
ColorEdge CG275W main monitor via Thunderbolt
Photoshop 12.0.4
Nik ColorEFX Pro 3.x
Onone Perfect Resize Pro 7.x

I've checked with CS5.1 and the original file isn't being written to here on OS X 10.6.8 when a copy is written. The only file that's written to is the one named in the Save As dialogue. I don't know what to suggest, sorry.
Edit: I see you have 12.0.4 - CS5. You can probably ignore my post since a fix to your problem may have been made in CS5.1.

Save A Copy Command

Similar Messages

Maybe you are looking for