Save as Workflow vs Application

I've made a great little workflow but there is a small problem with it.
When I run the workflow, the thing runs exactly as planned:
Downloads pics from a CF card
Sorts RAW vs JPG into diff folders
Imports JPGS into iPhoto
Sorts new photos into new Album
Starts a full screen slideshow of the new Album
but when I save the workflow as an application and tell Image Capture to run that App when a CF card is inserted, it stops after the sort line.
Any suggestions?

That's a good point about lossless and lossy compression.
The real question becomes are you trying to convert vector into raster, or not. If you are, you do lose some information in the process, because vectors are always approximated by raster. While raster regions can have inside and outside topology that is converted into vector polygon of different topology inside and outside, you don't have direction. Vector back to raster you lose the direction of drawing of vectors if they go from point A to point B.
If you did a pure postscript print job, you'll likely gain more information than PDF to postscript or vice versa. A software called Ghostscript I've heard has a much better rendering of postscript prepress than just PDF. Though I've never tried it myself.
http://pages.cs.wisc.edu/~ghost/

Similar Messages

Workflow works- application doesnt

Hey guys,
I created a workflow that works perfectly when run through automator, but when I save it as an application or a plug-in, it stops at random points, and does not give an error message. Any ideas?

Any ideas?
Message was edited by: Douglas Suiter

Saving a PDF file, where it saves into a paint application

Recently when I save a PDF it saves into a paint application. Does anybody know how to resolve this problem?

I found the problem..
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"
Second box down on this page, there is a icon and to the right of that there is a box that asks you which application you want to open the program with. And mine was showing a paint icon. I have changed that to Adobe Reader and now it works great!
Rick
"Ask and it will be given to you; seek and you will find; knock and the door will be opened to you."
Matthew 7:7
Please be environmentally friendly - please don't print this email unless you really need to?

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

Save Dialog in Office Application does not set the Content Type to the one selected on Document Creation.

We have a Library that supports 4 Content Types ("Content Type 1","Content Type 2","Content Type 3","Content Type 4")
The user clicks new and selects "Content Type 3"
Word is started
The user edits the document
Clicks Save
"Choose Content Type" dialog is shown set to the Content Type "Content Type 1" because the Document content type is ordered as First (which also means Default)
What is expected is the "Choose Content Type" dialog to show "Content Type 3" as selected
Any ideas?

Hi,
According to your description, there is a library with four content types, you create a document with one of the content types, click save button in Office application,
then a “Choose Content Type” dialog will show up for selecting a content type.
I tried to reproduce as below:
1. Create a library with four content types;
2. In the ribbon of this library, “FILES”->”New Document”->”Content Type 1”, then the Office application with the predefined template will be opened for editing;
3. Click the “Save” button, choose the save path as the current library, click “OK” to finish the process;
4. Refresh the library in browser, the newly created document appears there.
In my test, there is no “Choose Content Type” dialog showing up when save the document in Office application.
I would suggest you provide more details about how to reproduce this issue(screenshot would be better) for further research.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Save as pdf causes application to crash

I have done a clean install of Lion OSX on several computers (imac & mbp). Each of them has Adobe 9.x installed. I have all updates for osx and Adobe but keep having the same problem on all systems.
When I am in any application and choose "Print" then choose "Save As PDF" the application will crash before presenting the Save As dialog box. Any suggestions would be helpful.
Thanks
Bill

I am still having this problem and it's quite annoying. Does anyone have any help they can offer? Please?
Thank you!
Kristen

Need to save a file on Application server, receiving error.

Hello,
I want to save a file on Application server.
I have data in the final output table gt_out_chng.
I want to write a file in the application server and this is the
code that written,
data : MY_NEW_FILE type file.
        MY_NEW_FILE = '/tmp/test.txt'.
data: gv_output(255) type c,
      P_FILE TYPE rlgrap-filename.
   p_file = 'F:\USR\SAP\PUT'.
CONCATENATE p_file '\' sy-datum sy-uzeit '.txt'
                             INTO p_file.
OPEN DATASET 'P_FILE' IN TEXT MODE FOR OUTPUT
                                  ENCODING DEFAULT.
IF SY-SUBRC = 0.
LOOP AT GT_OUT_CHNG INTO WA_OUTPUT_TAB.
TRANSFER WA_OUTPUT_TAB TO 'P_FILE'.
CLEAR WA_OUTPUT_TAB.
ENDLOOP.
ENDIF.
CLOSE DATASET 'P_FILE'.
i am receiving an error message as follows :
"WA_OUTPUT_TAB" cannot be a table, a reference,
a string, or contain any of these objects.
Please correct the code if found any errors..
Any suggestions will be apprecaited!
Regards,
Kittu
Edited by: Kittu on May 15, 2009 10:27 AM

Hello,
Instead of using the following,
OPEN DATASET 'P_FILE' IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
use this,
OPEN DATASET P_FILE IN TEXT MODE FOR OUTPUT ENCODING DEFAULT.
P_FILE is your variable, do not put it in quotes
Edit: The same thing applies for your transfer and close statements
Edited by: Kris Donald on May 15, 2009 2:05 PM

How to run "WCF Workflow Service Application" (C# project) using "WCF Test Client" in VS 2013 ?

I have created a WCF Workflow Service Application of C# project.
How to run the project using WCF Test Client directly from VS 2013 by doing F5 ?
Iam using VS 2013 (.NET 4.5.1). It throws an exception to compile c# expressions.
Can we set any settings in web.config file ?
Please provide the solution.

Bhanu Prakash T,
It surprises me that building a simple WCF Workflow Service Application project in VS 2013 is giving you this problem. That project template should result in a file with an extension of ".xamlx" being generated. With .Net 4.5 and C#, that XAMLX
file will contain CSharp* activities for the expressions that you specified in the workflow definition. By default, those expressions will be compiled when you use "F5" to execute the workflow.
Or are you self-hosting the WorkflowServiceHost and loading the XAMLX file yourself using ActivityXamlServices.Load and then creating and managing the WorkflowServiceHost object instance yourself? You must can do the compilation yourself by following these
examples -
https://connect.microsoft.com/VisualStudio/feedback/details/741537/cannot-self-host-a-workflow-service-using-c-expressions or http://wf.codeplex.com/discussions/444990.
Jim

SP2013 Workflow Service Application is not showing up only WF Service App proxy but the WF is working...

I configured Sharepoint Workflow Manager 1.0 in Sharepoint 2013 App Server running under Windows 2012 R2. The Workflow manager is working properly - I tested using Sharepoint Designer and Sharepiont Workflow 2013 is listed. But under Service Applications,
only Workflow Service Application Proxy shows up NO Workflow Service Application.
I followed the troubleshooting steps on this - I have re-registered WF many times but still only proxy is coming up.
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
I also run IPConfig /FlushDNS, rebooted App and WFE servers.
Any reason why WF Service Application is not showing up? Any resolution to have WF Service App show up?

Hi John,
I recommend to click Configuration Wizards in the Quick Launch of Central Administration site and then click Launch the Farm Configuration Wizard.
And then make sure that the Workflow Service Application is selected and then click Next. (You can uncheck the other service applications if you do not need them)
After that, the Workflow Service Application will show up.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Automator wants me to save the workflow every time I run it.

I have a simple workflow in automator. It finds all files on the desktop with an extension of .jpg and saves them to a folder. Two steps: "Find Finder Items" and "Move finder items". It works just right, but when I quit Automator after running it, it ALWAYS puts up a dialog box saying "Do you want to save the changes you made in the document “Movefile.workflow”? " I have to click on a box every time. What gives? I'm not changing the workflow at all! How do I get rid of this? it's annoying!

If it wants you to save the workflow as an app, try that and see if it works.
Please post back.
ddr

Dreamweaver CS6 cloud - I can no longer use "Save As' and the Application manager won't open.

I always open an old page and use "save all" to save it, then "save as" and change the name of the page to what I want the new page to be the rewrite the new content. It doesn't open a box for name change any longer. Also The application manager does not open at all.
What to do to fix this?
Roger

Hi Roger,
Can you close other applications open on your computer, and retry before the experts here suggest other solutions?
Thanks,
Preran

Invalid method "Save As" from Excel application object

I have Windows 2000 and Excel 2002 installed on my machine.
I down loaded "renamed Excel 2000 workbook.vi" from NI website. Relinked ref num to Excel application object but get the error of invalid method (Save As). Tried to relink invoke node to Save As by selecting method from drop down menu. However this method is not on the list. Tried other excel objects but can not find "Save As" method. Has this been removed/moved?

I was able to correct the error by relinking the Workbooks->Open to Open. This changes the subsequent Invoke Node from IAppEvents to _Workbook. There you will find the Save As method.
Michael
www.abcdefirm.com
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

SOA Suite 11.1.1.2: Human workflow: custom application: Attachment: getCont

Hello,
i am building a custom application for the human workflow component in SOA Suite 11.1.1.2.
I am able to add attachments to the created tasks. But when i try to get the contents with the function AttachmentType.getContent(), i always receive a null pointer.
I have looket into the database and there are the entries in a blob in the content-column of the table wfattachment. But there is the contents binary, although i put it to the task Base64Encoded.
Can someone help me to get the contents of the attachments?
Best regards and thanks a lot
Friedrich

Thank you.
I must have changed something by accident. I would never had caught that. I reversed the changes in the WebLogic Console and all was right in the world. The app deployed correctly and the Human Task Approval Form worked flawlessly.
I guess I do some things right. ;-)
Steve Davies

Save password for several application in one workspace

Hi, I have several applications in one workspace with custom authentication. How do I set the option to save password (which is same for all apps) , so I would not write password every time when switching from application to application. Thank you

933913 wrote:
Hi, I have several applications in one workspace with custom authentication. How do I set the option to save password (which is same for all apps) , so I would not write password every time when switching from application to application. Thank youIf you are using the same authentication for all your applications, then you can redirect to those applications just same as you redirect to the current app by just changing the app_id
you can use a same session cookie name for all applications and make sure all apps use same authentication scheme
Edit you application A > Shared Components > Authentication Scheme > edit your authentication > Session Cookie Attributes section
set Cookie Name value to somestring
for example: commonauthcookie
Repeat the above step for all other applications and set the cookie name to the same as above

How to Initialize a workflow from Application using CIS

Hi,
I am new to the (Stellent) UCM, And could not find a way to initialize a workflow from CIS, Someone's help is greatly appreciated.
All i can find in forums about the workflow with in the Stellent Interface. But No one talking about how to initialize or call a workflow and use it from the application perspective.
Your help is greatly appreciated.
Thanks In Advance.

CIS is one of the UCM Java API sets that you can use to connect WCI with the content server - it is on the WCI side of the fence, technically, but help can be found all over.
If you call the checkin service - typically I use CHECKIN_UNIVERSAL, which is also the service that gets invoked by the ISCSDocumentCheckinAPI checkinFileStream(...) service. If the metadata matches something that triggers the workflow, you will have an item in the workflow queue.
Be warned - from what I understand, the CPS portlets used a checkin API that does not trigger workflow, even if there is a matching criteria.

Save as Workflow vs Application

Similar Messages

Maybe you are looking for