Save Images adding sequence number before Extention

Hi
when i run script multiple file in one batch
i want to add image sequnece for that all file
For Example
File Name + 001 + extension (myfile001.jpg)
File Name + 002 + extension (myfile002.jpg)
Because I want to Create Droplet
So I dont want bridge batch rename process
If anything possible to run Droplet without open photoshop

If anything possible to run Droplet without open photoshop
It won’t as far as I can tell.

Similar Messages

Script to Save images in alternate folder before running an action

New to scripting here, and need some help....
I need to do the following:
1) copy original images from a specific folder (customerid\Raw_Images) and save them to an alternate folder (customerid\Raw_Images_Original)
2) Run a particular action in photoshop to enhance the images
3) Overwrite the image in Raw_Images with the newly enhanced one.
4) Save a thumbnail 400px wide in a folder (customerid\Thumbnails)
5) Prompt the user that the customer's images have been enhanced.
Any help would be appreciated.
I have done similar projects before but cannot seem to successfully combine all of my past experience to get this off the ground.
Thanks in advance!
I have this code already below, but how do I now set it up to prompt my user to select a customer folder to run it on?
// makes backup of image and applies enhancements to orig and thumbs
// be advised: this overwrites existing jpgs of the same name without prompting.
#target photoshop;
if (app.documents.length > 0) {}
var thedoc = app.activeDocument;
// getting the name and location;
var docName = thedoc.name;
if (docName.indexOf(".") != -1) {var basename = docName.match(/(.*)\.[^\.]+$/)[1]}
else {var basename = docName};
// getting the location, if unsaved save to desktop;
try {var docPath = thedoc.path}
catch (e) {var docPath = "~/Desktop"};
// jpg options;
var jpegOptions = new JPEGSaveOptions();
jpegOptions.quality = 9;
jpegOptions.embedColorProfile = true;
jpegOptions.matte = MatteType.NONE;
//save jpg as a copy into Raw Images Orig Folder:
thedoc.saveAs((new File(docPath+'/../'+'/Raw_Images_Original/'+docName)),jpegOptions,true);
doAction("Sketch","Spring 2014");
thedoc.saveAs((new File(docPath+'/../'+'/Raw_Images/'+docName)),jpegOptions,true);
//save thumnail:
thedoc.resizeImage(UnitValue(400, "px"), undefined, 300, ResampleMethod.BICUBIC);
thedoc.saveAs((new File(docPath+'/../'+'/Thumbnails/'+docName)),jpegOptions,true);
//close the Document
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);

You just add your code inside the loop, after the copy line. You can use ScriptListener to record playing an action and then just put in new names of the actions if there are more than one, like:
for(var i=0;i<theFiles.length;i++){
theFiles[i].copy('~/desktop/' + docName); //or whatever path you want
playMyAction(actionName,actionSet)
function playMyAction(name,set){ //subsitute name & set for names of action and set used to record action
//ScriptListener code here to play action....

Just set up lightroom 5 and imported images with sequence number but wanted image number. How do I renumber all images in lightroom with an image number?

How do I renumber all images in lightroom with an image number?

Try line-height: 19px; and display: block; (as shown) on the following css seletor :
ul.MenuBarHorizontal a {
     font-family: Lucida Sans Unicode, Lucida Grande, sans-serif;
     color: #CC6;
     text-decoration: none;
     padding-top: 10px;
     padding-right: 12px;
     padding-bottom: 10px;
     padding-left: 12px;
     line-height: 19px;
     display: block;
Normally setting a height on a container which you have no control over is not a good idea. The text can be enlarged and that will throw everything off. The best way is to set no heights at all but use padding and make sure your background image is flexible enough to accommodate the text enlargement.
ul.MenuBarHorizontal a {
      padding: 12px 12px;
     display: block;

Save Document ADD Some Text Before Extention

Documentname_we.extention
I want this type Naming for PSD.TIFF.JPG.EPS

This will work if your filename only has one "." otherwise create a for loop to piece them together the same way I did dnsplit[0]+"_we."+dnsplit[1];
var dname = app.activeDocument.name;
dnsplit = dname.split (".");
//dnsplit.length;
var newName = dnsplit[0]+"_we."+dnsplit[1];
//$.write(newName);
Cheers John.

On "save image as...", Firefox requests a download location

OS: Windows 7 64-bit
Browser: Firefox 4.0.1
I recently did a clean install of Windows and all related programs, Firefox included. I now find that, no matter what, Firefox always asks me where to save my file when I right click an image and select "Save image as..." Because my job often requires me to pick and choose several images from a given site at a time, this is a big hassle and add a lot of extra time and clicking.
I would love to know how to make it stop asking me to choose a location every single time I download a simple image. It is infuriatingly frustrating.
This behavior is consistent whether I have chosen a default download directory in the options or if I have instructed it to "always ask" me. Changing this option does not change the behavior.
Incidentally, the extension DownloadSort seems to be broken now, as well, which is odd because I was running Firefox 4 prior to my reformat and it was working as intended. Disabling or enabling this extension has no effect on the issue. Similarly, I installed Automatic Save Folder in a desperate attempt to fix the problem, but it appears to be inactive as well.

Regarding the file saving inconsistencies, great point! I'd recommend [http://input.mozilla.com/en-US/feedback submitting some feedback] or [https://bugzilla.mozilla.org/ filing a bug report]...I may even file a bug myself if I get some time. Ideally, you want to be able to right-click on any image on the page and have it saved to the specified default download directory without a prompt, correct?
I also tried to reproduce the Firefox experience with ''Save Image As'' you described before previously with different Firefox versions, but was unsuccessful as well...I'm assuming the DownloadSort add-on was adding that nifty feature.
Could you point me to a page/site where Google Chrome behaves differently from Firefox in regards to ''Save Image As...''? From my experience, Google Chrome does the same thing as Firefox, but I may not be using the browsers in the same way. I suspect the developers prompt for a filename/location because often websites give very long and/or non-descriptive filenames for images, so they figure users probably want to rename the file...alas that's no help in this situation!
I feel like I'm now just throwing a bunch of add-ons at you in the hopes that one might stick (I'm not, honest!), but I also stumbled across another [https://addons.mozilla.org/en-US/firefox/addon/image-picker/ add-on called Image Picker] that I think may find useful. After the add-on is installed, it will add a ''Pick Images'' option in your context menu (right-click on a page with images), then selecting ''Pick Images'' will bring up a small window with all images on the page from which you can select in the menu and save to a folder.
In any case, no pressure to mark your question as solved! :)
P.S. If you must change browsers, at least give [http://www.opera.com/ Opera] a go if you haven't already. ;-)

Enq: TX - row lock contention in forms 10g sequency number generation

Iam Getting the Deadlock issue in oracle formdeveloper 10g database is 11g Acutually in our small Hospital organization using different forms generating entrying labrequest form finally save time
one sequency number will generated i have give procedure below every save criteria form using below procedure some time iam getting lock iam using blocksession query i have find out some
OSUSER
MACHINE
TERMINAL
PROGRAM
SQL_ID
LOGON_TIME
BLOCKING_SESSION_STATUS
BLOCKING_SESSION
EVENT
user423
UMCCDOM\LEVEL4-MICU
LEVEL4-MICU
PrjMcr.EXE
0ccngw7dfkmgb
23/09/2013 11:34:41 AM
VALID
277
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
23/09/2013 11:32:50 AM
VALID
186
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
22/09/2013 2:49:47 PM
VALID
277
enq: TX - row lock contention
SYSTEM
WORKGROUP\PRIAPPSVR
PRIAPPSVR
frmweb.exe
0ccngw7dfkmgb
23/09/2013 7:00:22 AM
VALID
186
enq: TX - row lock contention
user290
UMCCDOM\LEVEL2-N
LEVEL2-N
PrjMcr.EXE
0ccngw7dfkmgb
23/09/2013 10:28:06 AM
VALID
277
enq: TX - row lock contention
lock are happen after open the code i have find out used FOR UPDATE in procedure please tell me any alternative for this every labrequest form saving time using this procedure for generating prefix sequence number multiple user using with different systems
PROCEDURE   Gsp_GenSeqNum (I_SvPrefixCd IN VARCHAR2,I_SvUserName IN VARCHAR2,
                          O_SvSeqNum OUT VARCHAR2) IS
--This Procedure generates the sequence number
--by retrieving the prefix based on the code
--supllied to the procedure.
CURSOR crSeqGenerator IS
         SELECT Gsn_prefix_last_num, Gsn_prefix_year
            FROM G_SEQUENCE_NUMBER
         WHERE Gsn_prefix_Cd = I_SvPrefixCd
               AND Gsn_prefix_year = TO_CHAR(SYSDATE,'YYYY')
FOR UPDATE OF Gsn_prefix_last_num;
udSeqNum        G_SEQUENCE_NUMBER.Gsn_Prefix_last_num%TYPE;
udNextSeqNum    G_SEQUENCE_NUMBER.Gsn_Prefix_last_num%TYPE;
udYear          G_SEQUENCE_NUMBER.Gsn_Prefix_year%TYPE;
udPrefix        G_SEQUENCE_PREFIX.Gsp_Prefix_Value%TYPE;
BEGIN
SELECT Gsp_Prefix_Value
INTO udPrefix
FROM G_SEQUENCE_PREFIX
WHERE Gsp_Prefix_Cd = I_SvPrefixCd;
OPEN crSeqGenerator;
FETCH crSeqGenerator
   INTO udSeqNum,
        udYear;
IF crSeqGenerator%FOUND THEN
     udNextSeqNum :=udSeqNum + 1;
     O_SvSeqNum     := udPrefix||'/'||TO_CHAR(SYSDATE,'YY')
                               ||'/'||LPAD(TO_CHAR(udNextSeqNum),6,'0');
ELSE
INSERT INTO G_SEQUENCE_NUMBER VALUES(I_SvPrefixCd,TO_CHAR(SYSDATE,'YYYY'),0,I_SvUserName,SYSDATE);
     udSeqNum      :=0;
     udNextSeqNum :=udSeqNum + 1;
     O_SvSeqNum:=UdPrefix||'/'||TO_CHAR(SYSDATE,'YY')
                         ||'/'||LPAD(TO_CHAR(udNextSeqNum),6,'0');
END IF;
UPDATE G_SEQUENCE_NUMBER
     SET Gsn_Prefix_last_num=udNextSeqNum
   WHERE Gsn_Prefix_Cd = I_SvPrefixCd
     AND Gsn_Prefix_year=TO_CHAR(SYSDATE,'YYYY');
CLOSE crSeqGenerator;
END Gsp_GenSeqNum;
Thanks
subbu

This application is inbuit with some modules VB (cath ,cardio)and oracle forms for required sequence number generation different time used this procedure whereever required the sequence Prefix generation.If i replace the procedure sequene to oracle standard sequency if the user cannot save the form unnessary sequency generated order is missing from sequence.

How can find SCN or sequence number on the update operation?

nedd to recovery database, how can find the SCN or sequence number before the update exection?
thanks

nedd to recovery database, how can find the SCN or
sequence number before the update exection?Sorry - there is something confusing about your question ...
It seems to me the SCN is the 'system change number', which identifies when a change (table, row, block, flush log buffer to log file, etc) has ocurred.
You seem to be asking for the SCN associated with an update before the update actually occurred.
Are you actually asking "How do I perform a point in time recovery to immediately before a specific update?"
Perhaps you could include a few more details, such as database version. For some reason different versions have different capabilities - that could be helpful here.

Change BP number before save

Hello,
We want to use an external number range for BP, the number must be assigned during the save using a Z FM for the determination of this number.
2 problems :
- Where to put a dummy number to avoid the message asking to enter a number for the BP?
- Where to put the FM to get the correct number during the save. We do not want to assign the correct number before the save to avoid gaps in the BP numbers.
BADI BUPA_GENERAL_UPDATE could be the solution for the save but which FM can we use to update the BP number in this BADI?
Thanks for your help,
Regards,
Frédéric

Hello Anoop,
Could you please let me know if you where able to resolve this issue? If yes, how?
I have a similar requirement and still working on solution for this.
Thanks in advance.
Regards,
Senthil G.

Previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once before. Recently that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

How do I save a running sequence file

Part of my testing requires a large number of variables to be passed to and from the UUT within TestStand. I can store some of these variables in the station globals, but I'd like the option to store others in the sequence files at run time and save them to disk (save the sequence file) at the end of the test. I can create variables in the station globals and commit the globals to disk just fine (LabVIEW vi's using the TestStand API). However, I cannot figure out how to do the same thing with a sequence file. My code is able to create and populate the locals variables with no problem, but I cannot save the running sequence file to disk with the new locals (or file globals) intact (they disappear when the sequence ends.) The reason I want to save the sequence file is to avoid manually entering all these variables into each sequence file locals list.
So, I think the questions are:
How do I make the new locals or file globals a part of the running sequence file?
How do I save the sequence file to disk before it stops running?
I can increment the change count on the file. I have figured out two or three ways to save the file while it's running without errors (although I doubt it's actually doing anything.) I'm using the TestStand API in LabVIEW vi's to pull this off and cannot find the functions I'm looking for.
Sorry if this is rambling, it's kind of hard to describe.

Hi Lars,
The reason that we can't save the local variables created during
runtime is because TestStand creates a runtime copy of the variables
when the sequence starts. After the sequence is finished executing,
this copy is discarded. The reason behind this is that TestStand allows
for a single sequence to have multiple executions at the same time, and
each instance gets its own runtime copy of the local variables. If new
locals could be saved to the actual sequence file in memory, it could
cause major problems for other execution threads of that particular
.seq file.
You can use the API to add variables to the actual file using
GetSequenceFileEx and incrementing the Change Count, or create a
separate sequence that modifies another sequence file, but adding these
locals to the sequence file from itself isn't possible.
Hope this helps Lars,
Have a good one.
Dan Weiland
Applications Engineer
National Instruments
www.ni.com/support
Dan Weiland

027: Unable to read the sequence number from the Workstation object

Environment:
NW 6.5 sp4
Zen 6.5 sp1
We had a problem with our inventory server processing .STR files a couple
months ago - had to turn off inv. policies on workstations while we resolved
it. Now it's resolved and we're running inventory again. We have a large
number of workstations reporting this error:
027: Unable to read the sequence number from the Workstation object
They have no data in the DB, although they do have minimal scan info, and
the last scan status date matches that of the sequence number error.
I've seen this sporadically in the past and have been able to resolve it by
initiating a full scan on the individual workstation. However, that does
not seem to be making a difference this time.
Novell's troubleshooting document basically says see if the server's
running, and see if there's data for the workstation in the db. Then call
tech support.
Any other ideas?
~~~Nicoya...

Jared wrote:
> Nicoya Helm,
>
>> 027: Unable to read the sequence number from the Workstation object
>
> I am thinking that this can also mean a previous full scan was not
> found. Or maybe the STR file name is bad.
>
> This information is stored here
> HKEY_LOCAL_MACHINE\Software\Novell\Workstation
> Manager\InvScanner\"STRFileName"
The machines I'm troubleshooting have valid formats for their STR names,
but that doesn't necessarily mean they are valid STR sequence numbers.
Does removing the value in the reg key cause the STR file name to be
recreated?
>
> Because imaging is used, it's possible that this information is matching
> on some machines which could cause problems.
I've verified that none of our images contain the c:\zenworks history
folder, and we run a script that cleans up any zenworks items before
sysprep (i.e. makes sure there's no registration info on the
workstations, etc). Our imaging scripts also clear any ZIS info to
avoid any duplication as well, so I don't think imaging would be causing
this.
> I believe 6x also has a hist.ini file like 3x inventory does, you might
> delete the file also.
Good tip about the hist.ini file, I didn't know about that. It does not
solve the sequence number error, but it does seem to force a full scan
of the system and cause the new scan to be stored in the DB, which was
not happening before.
Thanks!

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

How to pass the sequence number of current loop in a for loop in FPGA vi to the host

PCI-7830R
LV 8.2
What I was trying to do is to use multiple DIO to generate pulse at different sequence. Mode one is to automatically sweep from DIO1 to DIO20; mode 2 is several DIOs generate pulse simoutaneously. So I use a case structure to make the selection, in the mean time, I set up two for loop in each case so that I can use multiple pulse generations. For example, in scanning mode, if I set 2 exposures, it sweeps from 1 to 20 then do it again.
Then I need to get the loop sequence number, i of each scenario. So I put an indicator within the first loop, and create a local variable of it and put in the second one. Running the FPGA vi alone, I can see the indicator change in each case from 0 to N-1, N being the for loop time.But in the host vi, I tried to add this indicator as an element in the read/write invoke method, in the debugging mode, I could only see it directly jump to N-1 without all the changes I saw in FPGA vi.
Is it possible to get this number passed correctly from FPGA vi to the host vi? Thanks

Thanks for the reply Jared.
Excuse me if it looks incorrect, but I'm new to FPGA programming, so I would have to look into the FIFO you referred to. I used local variables because for one thing I have several different cases containing for loop in each of them, and I only want one indicator for the "i". If I put the indicator out of any for loop, it's only gonna show the last number which is N-1. For the other thing, it seems like property nodes are not allowed in FPGA vi. And by doing this, I can see the i number changing from 0 to N-1 in each case, well, in FPGA vi's front panel. But while I ran the host vi with everything, the indicator in host vi's front panel only showed the last number N-1. It may be the reason you said, it happened too fast before the indicator in host vi can catch it.
What I want to realize is to group the data I collect in host vi, for example, when I choose multiple exposure in each mode, and the FPGA runs 1 through 20 then do it again, I want the data stored in two groups using the loop sequence number as the seperator in file name. So it goes like 1-1, 2-1.......20-1; then 1-2, 2-2,.....20-2.

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days ago

Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

Firefox 32 hangs on "Save Image" dialogue box Windows 8.1..Tried everything

I clean installed windows 8.1..
then installed all latest drivers for my devices...
installed latest Firefox..
Then i needed some images ..so opened Google image search and searched images..opened one image in a New Tab.. clicked "View Image" and tried saving it by right clicking and selecting "Save Image"..
First it took a lot of time for the "Save Image" window to appear..
and then it hanged...
I tried doing it again by force closing and re-opening firefox..but same thing happened even if the Image is small like 100X100 pixels..
Then I opened the mozilla support questions and tried the following solutions some other users have suggested;
1: Opened FIrefox in safe mode (Same thing happens)
2: Disabled addons (Only addons i had was flash downloader and downthemall! - Same thing happens)
3: Reset Firefox (No use)
4: Disabled Hardware Acceleration (No Use - In fact firefox hangs as soon as I "View Image")
4: reinstalled Firefox (No Use)
5: Uninstalled my ATI Radeon display drivers (No Use)
6: Disabled JAVA and Flash (No Use)
So this problem still persists....and its quite annoying
Another thing I have noticed is when i try to save/download other files like mp3 or email attachment or pdf .. The window where it shows whether to Open or Save the file opens immediately..but takes around 15 seconds before I can actually Select and option and click Ok.

SOLVED - Atleast for Now....
So I think I have found the solution to this problem...
I reinstalled windows 8.1...
Then did 2 things..
1: Disabled Skydrive from Group Policy Editor and selected Always save files to local drive.
2: Disabled Bing Search from local file search (Windows Key + C-> Settings->Search and Apps->Search)
Installed Firefox..
and Now I don't have the problem...
I am going to install java, Flash and Addons ..and check again if the same problem occurs again..
Will update what happens..

Save Images adding sequence number before Extention

Similar Messages

Maybe you are looking for