Save/recall error coefficiects of 8510A to/from pc

I know that, these are the error correction coefficiects created during calibration (also called a \cal set"). The error coefficiect arrays can be read from or sent to a computer, by the OUTPCALC and INPUCALC commands. I used the attached vi. for 8510A.
But the output file is not correct.
May you help me.
thanks
yasamin
Attachments:
Save or Read Calibration Data.vi ‏43 KB
Read Calibration 3.vi ‏25 KB

Hi James W,
Thank you for your attention.
I changed vi and attached updated vi.
I can do saving a cal set to a file (save to pc),
but when I want recall a file (the same one that is saved to my pc) from pc and save to a cal set, vi. do not work.
system gives an error : "BLOCK INPUT ERROR"
I do not know why is it?
Regards,
Yasamin
Attachments:
Save or Read Calibration Data.vi ‏39 KB

Similar Messages

Error trying to publish (real time) to delivery: No response from remote execute trying to save assettype [error was -103].

Hi all,
I'm trying to publish for first time to a new environment (delivery).
The light of target destination is green.
When i click on "inicialize" i get these errors and in the docs i cannot find why or what i have to do.
Trying to publish asset types during inicialization it returns this error:
No response from remote execute trying to save assettype [error was -103].
Looking for the meaning for this i found: No table. What does it mean? Why the tool has not created the table?
And then, the next error message is shown (all of them are shown in the same screenshot) trying to mirroring. It might have to do with the previos error message... but i have no idea!
-12011. No response from remote execute trying to save assettype [error was -103]
sites.log in delivery environment says as follows
[2014-01-24 12:13:52,496 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SiteCatalog with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
[2014-01-24 12:13:52,527 CET] [ERROR] [.kernel.Default (self-tuning)'] [com.fatwire.logging.cs] ContentServer exception running CS recursively
COM.FutureTense.Common.ContentServerException: pagename not supplied Error code:BAD PARAMETER
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Reading page page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo from co-resident Content Server failed (errno=0).) Error code:GENERIC SERVER ERROR
[2014-01-24 12:14:06,021 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SystemInfo with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
Does anybody know how to help here?
Thank you very much.
Gala

What SQL server driver are you using, Microsoft's or the jTDS driver (see jTDS JDBC Driver)? It may be worth trying the other.
Also, can you enable
com.fatwire.logging.cs=DEBUG
in log4j.properties and retest, then post the entire resulting sites.log and application server log somewhere for us to see? e.g somewhere like pastebin.com
Phil

Error in creating New Entry from the Client in NW Mobile 7.1

Hi All,
I have created a mobile application for Laptops in NW Mobile 7.1.
I have a requirement to create an entry from the client, i.e., I need to create a PR in the client. The model bindind, the backend adapters, bapi wrappers are in place.
I have used the standard create BAPI for PR and wrapped it in a BAPI wrapper. I just have to give the PR details and save the entry in the client. The BAPI wrapper has the logic for generating the new PR number.
My problem here is, when I try to create a new PR, give the details and save, the entry is not getting updated in the backend and the sync state is '201'.
I checked the "Message Monitoring" in the NW Mobile Administrator for the particular SWCV.
For this create PR transaction, the particulars are as below
Message State: Error - Stop Flow
Message Type: Transaction
Error: "Error occurred while fetching synckeys from table ZDOE01700000SL"
"ZDOE01700000SL" is the Sync key look up table for PR(my data object).
Please let me know where I have gone wrong and guide me in rectifying this problem.
Thanks and Regards,
Sunil

Hi Sunil,
From my understanding, looks like you are not filling synckey when you are creating a PR in your client. Synckey is a unique key on the DOE using which you can uniquely identify any node.
There are two scenario's atleast as I know, where this error would have come.
Case 1. If you are modifying something on client, which has been send by DOE, then you are not supposed to change synckey because it is a primary key. Now if we assume that you are not modifying synckey but when you are sending an update, check if by any chance the synckey is not going to DOE which is one case, and the second one is, after DOE has end that record to client, someone has cleaned up all the tables on DOE for that dataobject or someone has deleted that entry on the backend because of which the entry has been deleted on DOE. In either case, you are modifying something on client which is actually not present on DOE because of which when the DOE tries to look up based on synckey it doesn't find the needed record.
Case 2. If you are creating something on client, then you are supposed to create a synckey which is a 32 bit character GUID. I think in your case, you are missing the synckey when you are sending it to DOE. Check if there is any API for doing that or you have manually create a GUID and send it.
Hope it works out.
Best Regards,
Siva.
PS: Reward with points if you find the post useful.

Error in rules while updating from PSA to ODS

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Hi Kazmi:
Runtime Errors         CONNE_IMPORT_WRONG_COMP_TYPE
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Short text
    Error when attempting to IMPORT object "HIST2".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RSORAT4M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "AKT_DAY_HIST2" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When importing the object "HIST2", the component no. 8 in the
    dataset has a different type from the corresponding component
    of the target object in the program "RSORAT4M".
    The data type is "I" in the dataset, but "P" in the program.
How to correct the error
    Try to find out why the type of the object should be different.
    There are various possible options:
    1. The type of the imported field has changed in the Data Dictionary.
       Make sure that the type of the imported field matches the type
       of the field in the Data Dictionary.
       If the data cannot be restored from another source, the data must be
       read by the 'old' structure, converted und again eported with the new
       structure, so that future IMPORTs will always function with the new
       structure.
    2. A new program version is active, which no longer fits the dataset.
       Try to solve the error generating the program "RSORAT4M" again. This
       works as follows: Select transaction SE38 in the SAP system. Enter
       the program name "RSORAT4M". Then activate the function 'Generate'.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONNE_IMPORT_WRONG_COMP_TYPE" "CX_SY_IMPORT_MISMATCH_ERROR"
"RSORAT4M" or "RSORAT4M"
"AKT_DAY_HIST2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught wit
"AKT_DAY_HIST2" "(FORM)", or its possible occurren
RAISING clause of the procedure.
Hope this helps.
Thanks to you and all
Raj

Pricing error in customer invoice-"Error in converting exchange rate from to RUB"

Hello Friends,
Please help me to solve the below issue .
When user created customer invoice, system showed pricing error for last line item . The error was for cost condition type which did not determined any value and had "Red" indicator . The error message is -"Condition ZXXX: Error in converting exchange rate from to RUB" . Message No.V1208 . User could save the invoice but accounting doc was not created .
In this case-->
-Document currency is RUB
-Currency RUB updated in customer master .
-Currency RUB updated in material master .
-Con.origin is A for this condition type .
Please tell me why this error message occurred ?
Regards,
Sandeep N.

Hi,
Below are the screen shots for OB22 and invoice :
Regards,
Sandeep N.

Can't save image, error message ???

Hi, I'm trying to save a pdf image in photoshop, as I always do, hitting command S, or going to file-save. I keep getting an error message saying "could not save "x" file because the file is already in use or was left open". Well duh, of course it's in use, I'm working on it.
Anybody know what's going on here? Am I missing something?
Thanks!!
Eric

Thank you! I'll give it a try!
Date: Sun, 16 Aug 2009 15:31:32 -0600
From: [email protected]
To: [email protected]
Subject: can't save image, error message ???
happens once in a while not sure why try a save as and over write the file now make changes and do a save and see if it works.
If does not I would reset the preferences or trash the settings folder.
>

Error when using OMBDEPLOY SPECIFICATION FROM

I am trying to deploy process flow from xml file generated with OWB using following OMB command
OMBDEPLOY SPECIFICATION FROM 'import.xml'
I got following error
OMB05623: Cannot deploy Specification from file. Exception follows. Element 'Package' used but not declared.
Anybody has any idea what I am doing wrong ?
Regards,
John

dallan wrote:
Hi
Did you save the import.xml file from OWB?
Yes, I exported it from OWB.I can deploy it from Design Center without any issues.Does it include transformation packages in OWB?
What do you mean ?
Regards,
Edited by: User12345 on 2010-10-11 06:05

Workbook Migration-System error in program CL_RSR_XLS_VIEW and from ASSIGN_

Hi Experts,
We are migrating workbooks from 3.x to BI 7. While opening the workboon from BI 7 Analyzer we are getting the following System Error and Disconnecting from BW server.
'Program Error in class SAPMSSY1 method UNCAUGHT_EXCEPTION. System error in program CL_RSR_XLS_VIEW and from ASSIGN_QUERY_2_DP03'."
We are at support pack level 17 and GUI - 710 with patch level 8.
If you have experienced with the above errors. Please respond.
Thanks
DB

Hi Naveen,
In migration you will get all these errors related to Front end. First save the Existing 3.x workbook so that the old version of the workbook will be saved into new Excel version (2003). now try to migrate the workbook , this time you will not get this error.
The root cause for this problem would be all your workbboks have been created erlier in very old version of Excel.
Thanks
DB

"Cannot save alias" error message

I am trying to create an alias and the message that pops up is "Cannot save alias." What does this mean?
It doesn't say that the alias is unavailable. I've been getting this error message since I migrated from MobileMe, which was over 6 months ago. I only have 1 alias created so far, I haven't used up. Anyone have any ideas?

@icloud.com addresses are being rolled out over an unspecified period: you will get one without having to do anything, and it will be additional to your @me.com address. You will get a notification email when your account is updated. You will notice that the alias creation pane shows @icloud.com as the suffix - apparently new @me.com addresses cannot be created and I imagine you will have to wait until your account is upgraded before you can create an alias.

Where I hv to SAVE the ERROR file, got in RETURN table of BAPI for ME51N?

Hi Experts,
Pls. clarify one of my simple doubt that, the functional owner have been asked to create a ERROR file(has given name as PR_ERROR_FILE), for the encountered errors, while uploading the data from flat file into Data Base for Purchase requisation-ME51N tx.
So, am thinking to upload by using a BAPI_PR_CREATE.
1) So, I can catch the ERRORS in RETURN table, then , pls. let me now that, Where I hv to SAVE/Create this ERROR file-PR_ERROR_FILE? Is it C drive?
2) Is I hv to SAVE as a Flat file format?
(the functional guy, is not availble)
Functinal guy words are,
For any errors that occur, those should be written out to an error file so that users can review and correct.
The error file should be name PR_ERRORS_FILE
thanq

No this will be save in the aplication server only...on the given path so any one can read it and rectify the error.

Error message "Save image error! Please check your profile"

Hi,
I have installed the second version of the Lens Profile Creator. When analyzing the images all is working fine and it is at the end where the following error message appears -
- Save image error! Please check your profile path and permission of the folder.
I have check and I cant anything that looks strange.
Have anybody seen this problem before ?
Thanks for any help solving this
/Mikael

Hi Simon,
Thank you, it was doing what you asked me when I realized that I had previous V1 file from ALPC in the structure.
Once I removed them It all worked well
Thanks
MIkael
Le 8 sept. 2010 à 04:15, simonsaith a écrit :
Please go to the ALPC preference dialog and see where is the default save profile location. Check if the folder exists on your system and whether you have permission to write to the folder.
-Simon
>

Many save conflict errors

I have a rather SP solution, that while being used, is still having modifications made to it. I mention this because I don't have a lot of past behavior to deduce from.
Anyway, the list is only used by one person, as well as me (the solution builder). There are two workflows associated with it that both update the current list item. Off and on, we get save conflict errors. I have turned the workflow on
and off to see if this might be the cause. It doesn't seem to be as sometimes the user can save without incidence whether or not the workflow is on.
Any ideas what I should investigate would be appreciated. We are also experiencing many time-outs when working in datasheet view - so maybe there is just some performance issues with the server?
There are no mistakes; every result tells you something of value about what you are trying to accomplish.

Hi run4it,
there are some trigger that may cause this issue to appear, for example: a procedure update(), or event receiver, or others. to narrow down perhaps we can try to check if your custom application have list.update() procedure and try to check this :
Call to list.Update() Multiple times cause below exception.
{"Save Conflict\n\nYour changes
conflict with those made concurrently by another
user. If you want your changes to be applied, click Back in your Web browser,
refresh the page, and resubmit your changes." }
If we are making changes to a list in a loop we should get the List object again
to call List.Update
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Couldn't Save File - Error Message

Recently after adding a few more pages and updating some existing pages on my site, I have been met with an error saying I cannot save my website using the save function of iWeb, I receive the "Couldn't Save File" error message, however it doesn't tell me what file can't be saved or what file might be missing. I am running verision 1.1.2. Thanks for any help anyone can provide.

Dear DOHCVTEC187:
I had that same error. iWeb would open with a "can't open file :unamed" error, and also would give me a "can't save" error. I searched on the discussions, and found a few things that might help.
First, save/backup your Domain. That is where iWeb saves all that cool web info. It should be located in:
<user>/Library/Application Support/iWeb.
I try to make a back up this when ever I make big changes anyways. Alway a good idea. Burn it to Disk, put it on another HD. Etc. Then delete the original, leaving the folder empty.
Second:
Trash iWeb preferences, located:
<user>/Library/Preferences/com.apple.iWeb.plist
Now, use Disk utility to repair permissions. I do this as a helpful step.
Then restart.
After restarting, open up iWeb. Hopefully it opens with out the error, since we are starting from "scratch". It should ask for you to create a new page/ new site. ie, remaking a "domain". Make a singe page. Save and then quit iWeb. It should run smoothly.
Now, go find that "new" domain you just made, and replace it with your old one.
That should help.
Also, one thing that I found when this error happened to me was that I had built links to documents , such as PDF for people to download. Thus the error "couldn't open, unnamed" etc. It was because those links were "broken", so I had to find each link that I pointed to a PDF, and double check that it was still working and pointed to the correct file. Could be a pain in the but if you have alot of PDF's, etc, but it was worth it.
Hope this helps!
15" PB g5 Mac OS X (10.4.9)

Error when Saving FR Report from Studio when Making Changes from Client PC

We get the following error when trying to save a report when using FR Studio from a Client PC: *"Expecting a transferable end, but received -4352: 2067198, expected: -4113, <-4098>, 8074 -4098"*. We do not get this error if we so a Save As instead of a Save.
If we use FR Studio while remoted into the FR server, we do not get this error.
Any idea what may be the cause of this error message?
Thanks.
Terri

We had a similar issue on 11.1.2, which was never really resolved. Is this the version you are on?

Save/Load Error "Unknown Error" while converting VI to Template VI

Hi,
I am trying to convert LabVIEW 8.0 VI to Template VI. If I change the file extention (Windows) from *.vi to *.vit, then icon is changing but while loading the template from LabVIEW 8.0 it tells Save/Load Error "Unknown Error". I tried mass compiling the VI's but no change. I tryed LabVIEW Save As options to save VI as Template VI.No Use. Then I created one Blank Template VI then copyed the contents from VI to Template VI. If I am reopening the Template again it tells the same error.
I assumed I can use all LabVIEW functions inside Template VI. (There is no difference between VI and Template VI). If this this assumption is wrong please let me know about the limitations in using Template VI's
Please let me know what procedure I should follow to convert VI to Template in LV 8.0
Thanks,
S.Venkatakrishna

Hello,
Thank you for posting to the NI discussion forums. Everything you tried should work, and does
with my copy of LabVIEW 8. I created a
VI, saved it as a .vi, renamed it to .vit, and even did “save as..” and changed
the extension there to be a vit. Have
you tried these things with a different VI – say, just a VI with a while loop
and a stop button? Is this error
accompanied by any other .cpp error messages?
We have seen situations like this where this error dialogue comes up,
and it’s usually a result of some sort of VI corruption. If possible you might want to post the VI
here too, and I can see if I can convert it for you. I’m happy to help, please let me know if
anything here helps, or if you have any additional information on this problem.
Travis M
LabVIEW R&D
National Instruments

Save/recall error coefficiects of 8510A to/from pc

Similar Messages

Maybe you are looking for