Saving data from BSP to table in SAP

Hi,
I am displaying some data from a standarad table using BSP in a browser....Now when we change anything and we want to save that data back to the database..
Is it possible to save data from Screen to SAP standard table using BSP..
Can anyone help me with sample code

Hi,
Yes, it is very much possible, But as per SAP suggestion we never update any SAP table directly, as many other tables are link with each other, so the better way is to update any table by means of calling BAPI's.
Suggestions :
1.Gather all changes reqd into an int table. Then use an ABAP statement - Export to memory and then submit and return command which executes a z program. Inside the zprogram, write a small code which will import the int table and then update the ztable.
2.If you have the table in your BSP as an internal table (example: wt_mytable), and the ABAP table is called mytable, you can use this code:modify mytable from wt_mytable.
This will add new entries and modify existing ones, based on the contents of your internal table wt_mytable.
Hope this helps,
Regards
CSM Reddy

Similar Messages

I want to get data from only RESB table without loss of any deltas

i have to fetch the reservation details for the production orders.
we are using descrete manufacturing method to keep track the Work in process and cost .
for addition of components manually in the production order we can track thru change date i.e From AUFK table with field name AEDAT. for each time when we are adding the components the system will create a new line item In tableRESB-OBJNR(field)
i need very few fields from RESB table to be pulled into SAP BW.
how should i proceed creating a generic exractor without any loss of deltas.
i want to get data from only resb table into sap bw.
how should i proceed with Generice extractor with single table RESB and what would be the delta field . could any one throw some light .
all answers would be rewarded with points

I have few reports for BOM data is to be pull into bw
all the reports contain the same tables Mentione below
MAST- material to BOM LINK
STKO- BOM header
STPO- BOM ITEM
STAS- BOM ITEM SELECTION
how should i create ageneric datsource satisfying that all the data comes from these tables without fail of deltas,
my doubts.1. Do i have to create a separate data sources (generic) for all these individually and load into separate ODS'S AND CLUB THEM into single ODS further.?
if i create i dont know what should be delta field that has to be picked for each datasource
2. Do i have to create a view on all these tables and create a generic datasource.if created what would be the delta field i have to select.
could you pls let me know how should i pull the data without loosing any deltas
could you pls let me know the flow with delta fields mentioned
regards,
P

Saving Data from ALV.

hi all.
I have an issue regarding saving data from alv to data base table.
The problem is like this. I have an internal table consist of 10 column from three diferent tables.one primary key is there.
now i have displayed it in alv grid. there is a column of quantity. i made some changes in quantity of some rows. now i want to save it into the database table from which that quantity field fetched.
i used first check_changed_data method. if the flag is set it means data is changed.
wat shud i do to save that quantity column into data base.
Thanks In advance.
varu

Hi,
To modify database or ztable from the ALV grid,you need to do the following:
---You have to modify the field Catalog fields (fields that you want to make editable).Set the field EDIT as 'X'.For example if you want to make the field below editable:
ls_fcat-fieldname = 'CARRID'.
ls_fcat-edit = 'X'.
APPEND ls_fcat TO pt_fieldcat.
---Call the method below before you call the set_table_for_first_display.
CALL METHOD ALV_GRID_INSTANCE->set_ready_for_input
EXPORTING
i_ready_for_input = 0. ( For Display ) and ('1' for Edit )
After this put the set_table_for_first_display.
Now if the ALV data has changed,and you want to change the database or ztable,then in your pf status give a function code for SAVE button in the GUI.
In the PAI of the screen,in user command module write the following:
WHEN 'SAVE'.
call method gr_alvgrid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
MODIFY spfli FROM TABLE itab_spfli.
endif.
(l_valid is a flag.
DATA:l_valid type c.
If you want to check if the user has entered any value on the grid, use the Method : CALL METHOD gr_alvgrid->check_changed_data.
This method returns a flag l_valid which can be checked to see if the data on the ALV grid has been changed or not.)
Regards,
Beejal
**Reward if this helps

How to export data from a Dynpro table to Excel file?

Hi
Here I go again. I read the post Looking for example to export data from a DynPro table to Excel file and put the code lines into a Web Dynpro Project where we need to export a dynpro table to Excel file but exactly at line 23 it doesn't recognize workBook = new HSSFWorkbook();
1 //Declare this in the end between the Begin others block.
2
3 private FileOutputStream out = null;
4 private HSSFWorkbook workBook = null;
5 private HSSFSheet hsSheet = null;
6 private HSSFRow row = null;
7 private HSSFCell cell = null;
8 private HSSFCellStyle cs = null;
9 private HSSFCellStyle cs1 = null;
10 private HSSFCellStyle cs2 = null;
11 private HSSFDataFormat dataFormat = null;
12 private HSSFFont f = null;
13 private HSSFFont f1 = null;
14
15 //Code to create the Excel.
16
17 public void onActionExportToExcel(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
18 {
19 //@@begin onActionExportToExcel(ServerEvent)
20 try
21 {
22 out = new FileOutputStream("C:/mydirectory/myfiles/testexcel.xls");
23 workBook = new HSSFWorkbook();
24 hsSheet = workBook.createSheet("My Sheet");
25 cs = workBook.createCellStyle();
26 cs1 = workBook.createCellStyle();
27 cs2 = workBook.createCellStyle();
28 dataFormat = workBook.createDataFormat();
29 f = workBook.createFont();
30 f1 = workBook.createFont();
31 f.setFontHeightInPoints((short) 12);
32 // make it blue
33 f.setColor( (short)HSSFFont.COLOR_NORMAL );
34 // make it bold
35 // arial is the default font
36 f.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
37
38 // set font 2 to 10 point type
39 f1.setFontHeightInPoints((short) 10);
40 // make it red
41 f1.setColor( (short)HSSFFont.COLOR_RED );
42 // make it bold
43 f1.setBoldweight(HSSFFont.BOLDWEIGHT_BOLD);
44 f1.setStrikeout(true);
45 cs.setFont(f);
46 cs.setDataFormat(dataFormat.getFormat("#,##0.0"));
47
48 // set a thick border
49 cs2.setBorderBottom(cs2.BORDER_THICK);
50
51 // fill w fg fill color
52 cs2.setFillPattern((short) HSSFCellStyle.SOLID_FOREGROUND);
53 cs2.setFillBackgroundColor((short)HSSFCellStyle.SOLID_FOREGROUND);
54 // set the cell format to text see HSSFDataFormat for a full list
55 cs2.setDataFormat(HSSFDataFormat.getBuiltinFormat("text"));
56 cs2.setFont(f1);
57 cs2.setLocked(true);
58 cs2.setWrapText(true);
59 row = hsSheet.createRow(0);
60 hsSheet.createFreezePane(0,1,1,1);
61 for(int i=1; i<10;i++)
62 {
63 cell = row.createCell((short)i);
64 cell.setCellValue("Excel Column "+i);
65 cell.setCellStyle(cs2);
66 }
67 workBook.write(out);
68 out.close();
69
70 //Read the file that was created.
71
72 FileInputStream fin = new FileInputStream("C:/mydirectory/myfiles/testexcel.xls");
73 byte b[] = new byte[fin.available()];
74 fin.read(b,0,b.length);
75 fin.close();
76
77 wdContext.currentContextElement().setDataContent(b);
78 }
79 catch(Exception e)
80 {
81 wdComponentAPI.getComponent().getMessageManager().reportException("Exception while reading file "+e,true);
82 }
83 //@@end
84 }
I don't know why this happen? Any information I will appreciate it.
Thanks in advance!!!
Tokio Franco Chang

After test the code lines appears this error stacktrace:
[code]
java.lang.NoClassDefFoundError: org/apache/poi/hssf/usermodel/HSSFWorkbook
 at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.ExportToExcel.onActionAct1(ExportToExcel.java:232)
 at com.sap.tc.webdynpro.progmodel.api.iwdcustomevent.wdp.InternalExportToExcel.wdInvokeEventHandler(InternalExportToExcel.java:147)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
 at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Thanks in advance!!!
Tokio Franco Chang
[/code]

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
 <item>
 <FIELDNAME>MATNR</FIELDNAME>
 <OFFSET/>
 <LENGTH/>
 <TYPE/>
 <FIELDTEXT/>
 </item>
 <item>
 <FIELDNAME>MTART</FIELDNAME>
 <OFFSET/>
 <LENGTH/>
 <TYPE/>
 <FIELDTEXT/>
 </item>
 <item>
 <FIELDNAME>BSTME</FIELDNAME>
 <OFFSET/>
 <LENGTH/>
 <TYPE/>
 <FIELDTEXT/>
 </item>
 <item>
 <FIELDNAME>XCHPF</FIELDNAME>
 <OFFSET/>
 <LENGTH/>
 <TYPE/>
 <FIELDTEXT/>
 </item>
 <item>
 <FIELDNAME>DATAB</FIELDNAME>
 <OFFSET/>
 <LENGTH/>
 <TYPE/>
 <FIELDTEXT/>
 </item>
 </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
 <DELIMITER />
 <NO_DATA />
 <QUERY_TABLE>MARA</QUERY_TABLE>
 <ROWCOUNT>20</ROWCOUNT>
 <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
 <DATA>
 <item>
 <WA>000000000000000023ROH 00000000</WA>
 </item>
 <item>
 <WA>000000000000000038HALB 00000000</WA>
 </item>
 <item>
 <WA>000000000000000043HAWA 00000000</WA>
 </item>
 <item>
 <WA>000000000000000058HIBE 00000000</WA>
 </item>
 <item>
 <WA>000000000000000059HIBE 00000000</WA>
 </item>
 <item>
 <WA>000000000000000068FHMI 00000000</WA>
 </item>
 <item>
 <WA>000000000000000078DIEN 00000000</WA>
 </item>
 <item>
 <WA>000000000000000088FERT 00000000</WA>
 </item>
 <item>
 <WA>000000000000000089FERT 00000000</WA>
 </item>
 <item>
 <WA>000000000000000098HALB 00000000</WA>
 </item>
 <item>
 <WA>000000000000000170NLAG 00000000</WA>
 </item>
 <item>
 <WA>000000000000000178NLAG 00000000</WA>
 </item>
 <item>
 <WA>000000000000000188NLAG 00000000</WA>
 </item>
 <item>
 <WA>000000000000000288HALB 00000000</WA>
 </item>
 <item>
 <WA>000000000000000358HAWA 00000000</WA>
 </item>
 <item>
 <WA>000000000000000359HAWA 00000000</WA>
 </item>
 <item>
 <WA>000000000000000521HAWA 00000000</WA>
 </item>
 <item>
 <WA>000000000000000578FERT 00000000</WA>
 </item>
 <item>
 <WA>000000000000000597HAWA 00000000</WA>
 </item>
 <item>
 <WA>000000000000000598VERP 00000000</WA>
 </item>
 </DATA>
 <FIELDS>
 <item>
 <FIELDNAME>MATNR</FIELDNAME>
 <OFFSET>000000</OFFSET>
 <LENGTH>000018</LENGTH>
 <TYPE>C</TYPE>
 <FIELDTEXT>Material Number</FIELDTEXT>
 </item>
 <item>
 <FIELDNAME>MTART</FIELDNAME>
 <OFFSET>000018</OFFSET>
 <LENGTH>000004</LENGTH>
 <TYPE>C</TYPE>
 <FIELDTEXT>Material Type</FIELDTEXT>
 </item>
 <item>
 <FIELDNAME>BSTME</FIELDNAME>
 <OFFSET>000022</OFFSET>
 <LENGTH>000003</LENGTH>
 <TYPE>C</TYPE>
 <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
 </item>
 <item>
 <FIELDNAME>XCHPF</FIELDNAME>
 <OFFSET>000025</OFFSET>
 <LENGTH>000001</LENGTH>
 <TYPE>C</TYPE>
 <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
 </item>
 <item>
 <FIELDNAME>DATAB</FIELDNAME>
 <OFFSET>000026</OFFSET>
 <LENGTH>000008</LENGTH>
 <TYPE>D</TYPE>
 <FIELDTEXT>Valid-From Date</FIELDTEXT>
 </item>
 </FIELDS>
 <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

How to retrieve date from a set type in SAP CRM in BRF+ application

Hi,
Can anybody please let me know how can I retrieve date from a set type in SAP CRM to BRF+.
I need to process the data in BRF+ and then send it back to CRM. Thanks.
Regards
Yogesh

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

Extraction of InfoCube data from BW system to non SAP system

Hello All,
Is the extraction of InfoCube data from BW system to non SAP system availbale only for BW 3.5 release ? If yes, how can we extract the InfoCube data to a non SAP system with SAP BW 3.1 ?
Hope to get some help.
Best Regards,
Loveline.

Hi Gianfranco,
Thanks for replying.
Yes I know that open hub service is the appropriate technique to extract data from the infocube.
But if we look at SAP Netweaver documentation : Prior to SAP NetWeaver '04(since the SAP BW release I am working is 3.1); We find that we have the option to extract to a DB table or flat file.
Now if we look at SAP Netweaver documentation : SAP NetWeaver '04; In addition to the above we have the option to extract to a non SAP system.
My requirment is to extract data from InfoCube to a non SAP system. The SAP BW release I am using is 3.1
Best Regards,
Loveline.

Master/Detail? Repeating Tables - Combine data from 2 repeating tables to one cell in sharepoint

Hi there, new to infopath. I have 2 sections in my form which are hidden and display based on the department selected. So Department A versus Department B, a section opens for details pertaining to that Department. So in each
section I have similar information requirements, similar but not exactly the same. Now I was able to create hidden fields that will concat the values from both sections in the instances of similar data (i.e. Name, Department location, etc, so if Department
A fills in Name on their section, then someone else submits the same form for Department B I still have one column of metadata in SP to displace the Name regardless of department or section they filled data into). However now I am stuck, I have repeating
tables in both sections and I want to concate the entries to output to the sharepoint list for that cell. However everything I have tried so far only concats the 1st value in the repeating table. Is there a way to take ALL of the data from
two repeating tables and merge them into one column/cell in sharepoint (metadata for the one form entry)??? I want to avoid having to create a excessive "views" of a list in order to accomodate the needs for BOTH departments. I hope
this is clear. Thanks for your help!
from msn forum

Hi Meera,
I apologise for delay. Anyways you can goto the
following link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36f08758-0a01-0010-c291-c03004aeb1af
for details.
Hope this will clear you. However, you further require
any more information then please feel free to mail.
Note:
ty_t_sender, cl_abap_char_utilities DEFINITION LOAD
all these are present in alsmex function group if you
place your function module in this function group then
you'll be able to access these things. Further, like
if you have security options and can't place your code
in this function group then create your own function
group in your own package and copy the contents from
alsmex function group.
Hope that answer your questions.
Regards,
Mirza Ifthekhar Baig.

Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

Hi,
I'm doing a internship in a production line.
My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
I would like to know who can give me an idea of how I could plot as much data and analysis.
Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
How could I compare, analyze and graph for example:
Five columns of production (input) with five (5) columns tested (data output).
After graphing.
Someone can give me a technique to analyze data? ie I compare column by column?
or some other technique? as a conglomerate could analyze data?
o give you an idea of the contect, now I perform an internship in a manufacturing turbines.
My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't take all the data from the source table.
I appreciate your advice
Thanks

You can declare as PT source whole Columns [$A:$E], without rows number.
Then You'll have all actually data.
Oskar Shon, Office System MVP - www.VBATools.pl
if Helpful; Answer when a problem solved

Open Hub fetching data from Change log table

Hi Gurus,
I have a scenario where in I have an Open Hub destination whose source is a DSO, and we are sending data into SAP Data services. We found that the data being sent is from the change log table. Is this how an Open Hub with DSO as a source works ? Or is there any possible way we can send data from the Active table of the DSO, when the DTP is run.
Kindly help. Thanks in advance !
Regards
Snehith

Hi,
For Extraction from the DataStore Object, we have the following options for Delta init Extraction:
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Change Log
The data is read from the change log of the DataStore object
We can select any of these options for data trasnfer.
Regards,
Geetanjali

Deletion of data from change log table and PSA

Hi,
For a DSO I want to delete data from "Chnage log table" and " PSA Tabel".
For the DSO manage screen I have seen " Environment-> " Delete changelog table" from this we can delete chnage log table data as per my understanding.
at PSA Level Mange screen also I have seen " Environment-> " Delete changelog table" from this option also it deletes the data from change log table or it deletes data from PSA table?.
if this option also deletes data from changelog table then how we can delete data from PSA table?
Please clarify me

Hi,
I am not sure what are you referring to from your point "PSA Level Mange screen also I have seen " Environment-> " Delete changelog table". When ever you click on manage for your psa you will be routed to a popup where you can see all your requests in the PSA table & there after if you click on any single request you will get Environment menu option but there wotn be any change log deletion option available. Please check again? Right clicking on your data source will take you to the manage requests for PSA. You can selectively delete the requests as required.
For DSO when you right click on manage you can directly find Delete change log data option in the Environment tab. there you can select the requests you want to delete.
Also if you want to automate the deletion process then you can simply create a chain and include the steps for PSA deletion & change Log deletion accordingly.
Also it is recommended to keep on clearing the PSA table & Chage log data at regular intervals as it saves the disk space & thus helping in performance optimization
Please refer the below doc at SDN, it will be helpful for you in automating the process of change log deletion & PSA deletion.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Hope it clears your doubts
Thanks

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

How can I modify data from a Transparent Table without ABAP code.

Hi,All
How can I modify data from a Transparent Table (like TCURR), and important thing is I want do all that with no ABAP code here. It is like that we always do that in a Oracle database use TOAD or PLSQL third party tools, with no script code here.
I had fond that there is a way can do that:
1, type 'se11',and Display Database table 'TCURR', click Contents, then click Execute to display all data
2, type '/h' and let debugging on
3, select one of this data then click 'Display',enter in debugging system.
4, then make a breakpoint in the code. But... display a dialog let I type a 'ABAP Cmnds', I want to know what can be type in for that?
and, My system is ECC6.
thank you all
Edited by: xuehui li on Aug 20, 2008 6:30 PM

Hello,
Your approach (with Vijay's suggestion) MAY work. However, depending on how tight security is at the company that you are working at you may or may not be able to acutaly change the value of the SHOW field to EDIT. This will be especially true if you are working in a Production environment. Vijay's other comment is true as well. This is not a recommended approach to change data (especially data with a financial impact like TCURR) in a production environment. The auditors will not be impressed.
Explore the option of a maintenace view or look at tcode TBDM to upload a file which includes daily rates from providers like Reuters or try tcode s_bce_68000174 which is a maintenance view on TCURR.
Regards
Greg Kern

Saving data from BSP to table in SAP

Similar Messages

Maybe you are looking for