Saving from VM to a folder on TC

Hi All
On my TC I have a few folders which I like to save things in - and recently I have been using the Parallels VM so I can run Windows7.
What I would like to do is save files when in "Windows 7" directly to my TC, however it doesn't seem like this is possible? Any help here much obliged...

I put my memory card into my card reader and plugged it into my computer. The adobe picture starter 3.0 came up and asked me to register. I said no and it deleted all my pictures off my memory card!
Fortunately they stayed on my computer. However, pictures that I took on 10/31 are hot there. I would like to put all the pictures back on my memory card. Please give me specific directions on how to do so. Thank you. T Catalano

Similar Messages

Cannot locate images saved from CS5

I recently upgraded not only from CS3 to CS5, but also from a PC to a Mac. I am having trouble locating some of the images that I am saving from CS5 in the folder that I saved them in. For example, I edited approximately 10 images and saved them into a new folder. When I started to upload them, I noticed that 4 of them were not in the folder that I saved them to. I checked first to make sure I had not saved them in the original folder, and I didn't. Next, I checked the images in photoshop to see if they had been saved. And they had been. Then I tried to save them again into the folder and it told me that this file already exists. But...it's not there. Or at least I cannot find it. Anyone have any idea where these saved images are hiding?

On Mac, the default folder is your user document folder - very much like on a PC. It's actual location on the mac volume is Mac HD:Users:Abingram:Documents, assuming default names. You should have no problems finding them. Saving them to another location should work just the same, but since user management is more rigid in UNIX environments, you may simply not see it if it is in a system folder or another user's folder. OSX actually hides some of these folders then and they are excluded from your personal Spotlight search. To circumevent this and recover your files, you might try to grant yourself admin privileges temporarily in your user control panel ("User can manage this computer"). If you are the only user, this already should be the case and then you may need to check folder permissions by invoking the info panle (Cmd+I)...
Mylenium

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKS

If you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer

HT2509 I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

Font Management in OS X

When I download an app while running iTunes from an external hard drive, the app is automatically saved to the my music folder on my desktop.

Also, when I move an updated app from the my music folder to the external hard drive, it no longer automatically deletes the old version of the app in the folder.

Hi, I was waiting for somebody with experience to pipe in, but as I understand it it'll be that way for upto 5 users if your Sharing iTunes.

How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
I need to use my Adobe programs, rescue my email, i-tunes and iphoto data. The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash. There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine. Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

No, the disk was backed up with time machine a few hours prior to the crash. I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up) was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available. And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive. I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed. But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive.
I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder). And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash. That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up. Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive. So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
Thanks for any help. Peggy
Message was edited by: peggy toole

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

Sent messages aren't saved in the Sent Items folder in Outlook 2013

When we send a message in Outlook 2013, a copy of the message should be saved in the Sent Items folder by default. If Outlook doesn’t save a copy of the sent message, it may be caused by any one of the following
reasons:
The “Save copies of messages in the Sent Items folder”
option in Outlook is disabled.
The save location for sent messages was changed to another folder.
There is a custom view set on Sent Items folder, or the view on
Sent Items is corrupt.
Outlook Data File may be damaged.
To resolve the issue, use the appropriate method for your situation.
Enable the Save copies of messages in the Sent Items folder
option
To configure Outlook 2013 to save copies of your sent messages in the Sent Items folder, please follow these steps:
1. Click File tab > Options.
2. Click Mail on the left pane.
3. Scroll to the Save Messages section, select the check box before “Save copies of messages in the Sent Items folder”.
4. Click OK.
If it is the replying message that is not saving to the Sent Items folder, we need to disable the “When replying to a message that is not in the Inbox, save the reply in the same folder” option in the location mentioned above.
If you’re using an IMAP account, please also make sure you didn’t select the “Do not save copies of sent items” in Account Settings. To check this, Please refer to the following steps:
1. In Outlook, click File tab > Info.
2. Click Account Settings > Account Settings, and then double-click your IMAP account to open the
Change Account wizard.
3. Click More Settings button.
4. Under Sent Items heading, clear the check box before “Do not save copies of sent items”.
5. Click OK and click Next to complete the configuration.
Make sure there is no rule or anything else to redirect sent messages to other folders
To check if it is caused by Outlook rules, please follow these steps:
1. In Outlook 2013, click Home tab.
2. Click Rules > Manage Rules & Alerts.
3. In the rules list, check if there is any rule that applied to the sent messages may cause this issue.
In addition, some rules may be corrupt or hidden and we cannot see them from the rules list. We need to use the MFCMAPI tool to find and delete the corrupt/hidden rules. To do this, we can use the following steps:
1. Download MFCMAPI tool from: http://mfcmapi.codeplex.com/
2. Start MFCMAPI tool.
3. Click Session menu >
Logon, select the Outlook profile you are using and click OK.
4. Double-click the mailbox that contains the inbox rules that you want to delete.
5. A new window will open. In the new window, expand
Root Container or Root – Mailbox, and then expand
Top of Information Store or IPM_SUBTREE.
6. Right click on Inbox and select
Open associated contents table.
7. In the Inbox window, locate and then right-click the items that have the
IPM.Rule.Message message class, and then click Delete Message.
To identify a specific rule, you’ll have to select the rule in the top pane in MFCMAPI and then scroll down in the lower pane and look at the
Property name(s) column. Find the ptagRuleMsgName property name and check the value against the rule name you were trying to delete in Outlook.
8. In the Delete Item dialog, select
DELETE_HARD_DELETE from the Deletion Style drop-down menu.
9. Click OK.
Reset the view settings on Sent Items folder
If you accidently changed the view settings on Sent Items folder, this may cause some sent messages not visible in the folder. To check if you’ve set any view settings on Sent Items folder, please follow:
1. In Outlook, select Sent Items folder.
2. Click View tab from the Ribbon.
3. Click View Settings button. If you notice the
Reset Current View button is clickable, it means the view settings for Sent Items have been changed before.
4. Click the Reset Current View button and then check the Sent Items folder again.
Scan and repair the Outlook Data File
To repair the .pst file, please follow:
1. Find and start the Inbox Repair Tool in the following path:
For Outlook 2013 on a 32-bit version of Windows:
<disk drive>\Program Files\Microsoft Office 15\root\office15
For Outlook 2013 on a 64-bit version of Windows:
<disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
2. In the Inbox Repair tool, click Browse to locate the PST file by using the Windows file system.
3. Click Start.
4. After the analysis scan has completed, it will present you with a scanning report and options for the next step. Click Repair button.
To repair the .ost file, since this type of data file is a copy of information saved on your mail server, we can just delete the OST file and restart Outlook to re-create a new one.
For more information about repair Outlook data files, please refer to this article:
Repair Outlook Data Files (.pst and .ost).
If you have any comments on this topic, please feel free to post here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Same problem here, connecting to a Groupwise (not latest) server. Whenever Mail.app 3 tries to upload/save a new messsage to the server, it would not save and completely lose the message!
I found slightly more information by turning off the "Save to server" option for Sent and Drafts, created a new message that I saved as draft, and then tried to manually move items to the Drafts or Sent folder on the IMAP server.
The error I received was: The message <message> could not be moved to the mailbox <mailbox>-<account>. The IMAP command "APPEND" (to <mailbox>) failed with server error: APPEND NotJunk.
To my inexperienced eyes, it looks like the latest version of Mail changed it's default IMAP handling commands that may be incompatible with older IMAP servers. Anyone else have more insight or know how I can get back Mail.app 2.x from Tiger?

Saving from Safari as PDF results in an icon with 0 byte volume that fails to open as it is "damaged" Why and how to solve?

saving from Safari as PDF results in an icon with 0 byte volume that fails to open as it is "damaged" Why and how to solve?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Images saving from Photoshop to Lightroom are saved way lighter

I first work on an image in Lightroom. Then, I sent a copy with LR edits to Photoshop where I continue to work on the image. When I am done editing in Photoshop and Save - the image goes back to LR, but the Photoshop Tiff copy in LR is far lighter than the image that was saved from editing in Photoshop. If I open the PS image from finder it looks fine - it is darker than the same file as seen in LR.

No problem. Waiting for a video rendering and upload to finish ;-)
If it is fixed in another account than it is highly likely that a develop preset or default gets applied to your images. This happens quite easily and has happened to me unknowingly too. Basically you would by accident have hit the Reset button in Develop while the option key was pressed. What you want to do is to go into Preferences->Presets and hit the button that says "Reset all default Develop settings". Then hit reset on your image. If none of that works, you can always trash the Lightroom preferences file. Quit out of Lightroom, go to the Finder. Hit command-Shift-G. Type ~/Library/Preferences/ in the display that you get to reveal the hidden by default preferences folder in your home account. Find the file that is called com.adobe.Lightroom5.plist (you might not see the plist extension on your computer) and drag that to the trash. Now start Lightroom again and your Lightroom should behave as if you just installed it. You might have to point it to your catalog file if it doesn't open with it there but with an empty catalog. File->Open Catalog-> select your main catalog.

Moving aac file from music to ringtone folder

Can someone please help me figure out how to transfer a converted .wav file (now in aac format I believe) from my iTunes music folder to my ringtones folder? I've searched every possible area I know to figure it out, but still cannot.
Thanks,
S

If there isn't a file explorer app already installed on your phone, you should download one from the Play Store. I personally like ES File Explorer, but I know there are many other ones out there.
Once you have a file explorer installed, you will need to locate the music file you want to move. That might be a challenge unless you know where it was saved. Once located, you will move or copy it to the "ringtones" folder for phone call tones or the "notifications" folder for text and email message notifications.

Saving from PhotoshopElements back to Aperture

Hello,
I am using Photoshop Elements 10 as my external editor and I can directly open up the image in PSE when I select "edit using
photoshop elemnts" from Aperture. That part is working perfectly.
However, when I finish editing the image and select "save" in PSE I can see that it's saving back to the Aperture folder structure,
but I do not see the updated image in Aperture. All I see is the uneditied copy that Aperture made for export to PSE (I shoot in RAW),
and *not* the changes that made to it.
I got around this problem in iPhoto by saving my edited images to an external folder and then re-importing from that folder,
but the documentation suggests that this extra step is not needed for Aperture. How do I get Aperture to reload the edits that
I made to the "for export to editor" version of the picture?
Thank-you,
Catherine

Yes, "Save over Current File", that is what I meant.
Catherine,
that is puzzling. Have you tried to reprocess the thumbnails and previews after saving in Elements?
Select the edited image and use the command "Photos > Generate Thumbnails" and "Photos > Update Previews"?
Sometime simply editing the photo in Aperture - add a slight crop or a touch with a brush will force Aperture to update the version and to show the edits.
This is the directory path that PSE is saving to:
Pictures/Morocco_2013/Masters/2013/April 17, 2013
That path does not look right. Are your images managed or referenced? If they are managed, I'd expect a path like Pictures/Morocco_2013/Masters/2013/April/ 17/someweirdnumbercombination ....
The "comma" in the pathname could be problematic. Is your project named this way?

ACL's disappear when saving from Word

I've got a strange problem. When I drag files from the finder to different folders on a share, acl's are being propagated. But when I open a Word file on the server, save it to the server, acl's are being stripped from the file.
The share is hosted on a Xsan reshare.
Any ideas?
Patrick

It's kinda working....I have some folders wehere different people can work with different rights. Now a user who normaly has read only read rights to a specific folder, has all the rights to files saved from Word. Finder copies are respected by the acl's. I tried Textedit, and Textedit has the same issue as Word!
This is really weird...Somebody?

I have transfered my library my library to a NAS drive. How do I stop Itunes from creating the default folder on the local drive?

I've transferred my Itunes Media Library to a NAS drive, and pointed Itunes (using the advanced preferences tab) to the relevant folder on the NAS drive. I have done this to free up disk space on a computer I primarily use for work but which I use both at home and at work. The NAS drive is at home. (To clarify, I am not expecting Itunes to function at work, only at home when access to the NAS drive is available).
Under certain circumstances Itunes will start-up at work and when it does it will create the folder structure for the Itunes Media Library in the default location (on the local drive) instead of looking for the location I have specified (the NAS drive) which it should not be able to find when I am at work and telling me that it can't find it (which would be fine).
How do I stop Itunes from recreating the default folder structure and defaulting the file path to the standard media library location on my local drive? Every time this happens I have to re-point Itunes to the NAS drive location, which often requires me to reconsolicate libraries which is tedious and time consuming. It seems that in the process of one of these consolidations I have lost some of the media files. They are still in the library (ie. visible in the Itunes window) but Itunes can't find the media associated with that file - identifying them with an excamation mark "!".
Any help with this would be appreciated, as I have read several forums and threads, and despite trying several different approaches I have been unable to address the problem, which appears to be exacerbated by the laptop being remote from the NAS drive.

angelofromnsw wrote:
Can I put the ".itl" and other database files on the NAS, and if so where would I put them? I'm thinking that if the library file is only available at home then the ITunes library won't get corrupted at work when it can't find the media, in the event that I accidentally start up itunes eg. while opening an attachment or disc that can be read by Itunes.
iTunes will start up and you will have an empty library.
Can I put the ".itl" and other database files on the NAS, and if so where would I put them?
Yes.
Quit iTunes.
Copy the /Music/iTunes/ folder on the NAS.
Move the /iTunes media/ folder currently on the NAS into the /iTunes/ folder you just copied to the NAS.
Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the NAS.
You can delete /Music/iTunes/ folder on the internal drive.
If you launch iTunes while NOT comnnected to the NAS, iTunes will recreate the /Music/iTunes/ folder and you will have an empty library.
WHen you are again connected to the NAS, just do step 4 above.
Do you know what the advantages and disadvantages are of having the database files like the ".itl" files stored locally versus on the NAS?
Keeping everyhing together inside the iTunes folder makes it "cleaner" and simpler to manage everything.

Saving from VM to a folder on TC

Similar Messages

Maybe you are looking for