Scale and map

when analysing a signal which having noise after FFT, I need measure noise field level base on some spectrum range. When I add some conversion table(actually measured voltage being related to the magnetic field strengthen.)into this dynamic data which is after FFT, I use VI: scale and map directly, But It does't work. Does anyone have good idea?
for example:
the conversion table is drawn from one curve of the below figure:

You can use XY graph. Then, press Ctrl+H and point your cursor to XY graph to see how to plot data on it.

Similar Messages

I need to map my garden. I need to draw it to scale and locate plants ties to a list of plants.

I need to map my garden. I need to draw it to scale and locate plants that ties to a list of plant names.

A quick google search for gardening apps gave a surprisingly large number of hits. I saw at least three distinct garden planner apps (from $2 to $10) without half trying. These are mostly for iOS - iPad and/or iPhone - though there may be equivalents for Mac OS.
I suggest you hit the app store and start doing some searches. I suspect you'll find something appealing fairly quickly.

Hi!!I want to scale an analogic signal, and I don´t understand very well how interpolated option works in "Scaling and Mapping".

Can anyone explain to me, the option Interpolated, in the function , "Scaling and Mapping?
Thank you!!!!!

When you select Interpolation you then define a table of value pairs; basically the raw data versus actual data.
For example
2 5
4 10
6 20
What the VI then does is if the input signal has a value of 3 the Express VI will linearly interpolate between 5 and 10 and will map your value of 3 to 7.5. Again a value of 5 would then be interpolated and mapped to 15.
Take a look at the attached VI.
Evan
National Instruents
Attachments:
mapandscale.vi ‏89 KB

What is the diffrence between map and map.entry in core java

what is the diffrence between map and map.entry in core java . where it will be use ful. any one give one example plz.

A Map contains Map.Entry's
e.g.
        Map map = new LinkedHashMap(8);
        map.put(new Integer(1), "one");
        map.put(new Integer(2), "two");
        final Iterator iterator = map.entrySet().iterator();
        while (iterator.hasNext()) {
            Map.Entry entry = (Map.Entry) iterator.next();
            System.out.println("key=" + entry.getKey() + ", value=" + entry.getValue());
        }

Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file

Hi All,
We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM).
Regards,
Theo

Hi Theo,
there is an example in SAP Library: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm">Collecting and Bundling Messages - One Interface</a>. Plz post us your detailed quetions.
Regards,
Udo

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

On iOS 7 when I try to set a new wallpaper why can't I scale and move my photo? Anybody else having this problem?, On iOS 7 when I try to set a new wallpaper why can't I scale and move my photo? Anybody else having this problem?

On iOS 7 when I try to set a new wallpaper why can't I scale and move my photo? Why does it chop off the heads? Anybody else having this problem?

Hi CollBA,
See More Like This to the right. This issue has been discussed several times on this forum.
Cheers,
GB

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

Data Type, Message Type and Mapping for FTP

Thanks in advance for your replies.
As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement should go away.
I only want to pick up the file from the one server and place it on the other and this leads me to some questions.
How do I define the Data Type and Message Type for each of the files? Do I need to consider the size of the record in each interface and create DT/MT with different sizes.
Do I need a mapping program that simply maps one structure to the other?

I recently completed a similar exercise.
It looks like this...
server1 ftp (Sender - delete file) - XI - Server2 ftp (receiver - create file). This will move the file from one server to another.
I used the same schema and mapped fields on a one to one basis.
The Size of the files I process are between 6kb and 500kb each, but the mapping/fields remain constant, just the numebr of items change.
Worked seemelessly for the last three weeks (since go-live)

PI 7.1 : Taking a input PDF file and mapping it to a hexBinary attribute

Hello All,
We have a requirement which involves taking in an input PDF file and mapping it to a message type with binary attribute and sending it to an R3 system.
Can anyone please detail the steps or point us to the correct documents for setting up the scenario.
The scenario is file to Proxy adapter. The part which we need assitance is pulling up the input pdf and mapping it to binary field.
Thanks.
Kiran

Thanks Praveen,Mayank,Sarvesh and Andreas for your valuable help with the issue.
I was able to successfully pick up the binary PDF file from a file server , encode it using Base 64 and post it to R3.
I used the following code snippet and added the mentioned jar files to create a new jar file which was used as java mapping in the operation mapping.
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.*;
import com.sap.aii.utilxi.base64.api.*;
import java.io.*;
import java.util.*;
public class Base64EncodingXIStandard implements StreamTransformation{
     String fileNameFromFileAdapterASMA;
     private Map param;
     public void setParameter (Map map)
          param = map;
          if (param == null)
               param = new HashMap();
     public static void main(String args[])
          Base64EncodingXIStandard con = new Base64EncodingXIStandard();
          try
               InputStream is = new FileInputStream(args[0]);
               OutputStream os = new FileOutputStream(args[1]);
               con.execute(is, os);
          catch (Exception e)
               e.printStackTrace();
public void execute(InputStream inputstream, OutputStream outputstream)
               DynamicConfiguration conf = (DynamicConfiguration) param.get("DynamicConfiguration");
               DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
               fileNameFromFileAdapterASMA = conf.get(KEY_FILENAME);
               if (fileNameFromFileAdapterASMA == null)
                    fileNameFromFileAdapterASMA = "ToBase64.txt";
          try
               while ((len = inputstream.read(buffer)) > 0)
                    baos.write(buffer, 0, len);
               str = Base64.encode(baos.toByteArray());     //buffer);
               outputstream.write("<?xml version=\"1.0\" encoding=\"utf-8\"?><ROOT>".getBytes());
               outputstream.write(("<FILENAME>" + fileNameFromFileAdapterASMA + "</FILENAME>").getBytes());
               outputstream.write( ("<BASE64DATA>" + str + "</BASE64DATA></ROOT>" ).getBytes());
          catch(Exception e)
               e.printStackTrace();
     byte[] buffer = new byte[1024*5000];
     ByteArrayOutputStream baos = new ByteArrayOutputStream();
     int len;
     String str = null;
I had to do the following configuration settings
1) Create a Sender Comm Channel with Adapter Specific message attributes and Filename checkbox checked.
2) Use the Java Mapping in the Operation mapping.
The scenario is working smoothly with out any issues.
Thanks.
Kiran

How to scale and clip a BitmapImage in Flex 4.5

Here's my problem, I need to scale and clip images into square sized tiles to put into a tile list. Here's how I want it to work:
1. I want all my tiles to be, say, 300px x 300px.
2. For each image, I want to scale the shorter side (either width or height) to fit in the tile using the "letterbox" scaleMode (so that it maintains aspect ratio).
3. Then I want to position the image in the center and clip away anything left over from either both sides or the top and bottom.
Here's an example to help clarify:
- I have an image with width=600px and height=1200px. First I want to scale the image to width=300px and height=600px (notice that aspect ratio is maintained), then center the image vertically and clip the image to 300 x 300.
Is this possible? This is actually a pretty standard way of displaying square thumbnails in many photo-based web sites, but I can't find a way to make it work in flex.
Any help would be appreciated, thanks!

You can define any number of risk levels (low, medium, high,
etc) using a
case statement
case (true) of
(value(member("total")) < 12): member("risk level").text
= "Low"
(value(member("total")) < 27) : member("risk level").text
= "Medium"
otherwise:member("risk level").text = "High"
end case
"Mike Crisp" <[email protected]> wrote in
message
news:e4kn47$b2n$[email protected]..
> Dave
>
> Now that I've started tinkering. Any suggestions as to
how I might work
the
> following:
>
> If value of member "total".text is between 8 and12
Member"Risk
Level".text =
> "Low Risk"
>
> If value of member "total".text is higher than 27
Member"Risk Level".text
=
> "Unaccepable"
>
> And so on.....
>
> Mike
>

Need to global find and scale and resize frame on a linked graphic

I have a whole set of files that contain multiple instances of an icon set (placed AI file). All of these are formatted to flow in the text as anchored objects with various object styles. I need to make sure that all instances of the placed AI icons are scaled to 30% and that their frames are fit to content. I have a LOT of files and each one has at least 20 of these icons. I thought the Object find and replace would help, but unfortunately it will not let you search for links, and while I can search for the object styles, there's no option to change scale and the fit content options does not have the "fit frame to content" (and doesn't work anyway from the few tests I ran using "fit content proportionally").
Does anyone have any ideas for how I can fix this globally in nearly 500 documents without having to manually select each icon and change the scale and apply the fit frame to content? I've done a handful of files this way, and it's VERY time consuming.

First make sure this works by duplicating a file and testing.
Make 1 image the size you need it
Grep search for
Find
~a
Change to
~C
if that doesn't work then try ~c (lower case) I can't remember how that works
If it does work - then you can open 2 documents and choose "All Documents" in the Search field.
If it's fine on 2 docs - then I'd say go ahead and do the rest.
I stress to please use a duplicate set of files in case things go bad.

Setting Scale and Units in a PDF document

Hi,
I have a batch of architectural plans in PDF format. They have been generated from Autocad.
When I want to make measurements on them, I need to specify the scale in the dialog box.
In the Preferences > 2D Measures, there is an option tu use the document scale and unit if available.
My documents do not have them. How can I add a scale information to these plans ? (I have Acrobat 8 Pro).
Thanks
Astugev

If you only have a few to change, use the information on Deepak's link. It tells you how to use the Edit Object tool.
If you need to change a lot of them, you should really work on the original files - PDFs are not designed to be edited very easily. It's a simpler process in Acrobat XI but you still need to change each image by hand, one at a time.
Bill suggests exporting to Word (File > Save As > Microsoft Word) - that will give you editable content but will remove anything interactive about the PDF file and tends to mess about with formatting. It's very much a last resort option.

JS CS3 flag duplicate images with scale and rotation differnce

I've been trying to cut down on the number of images a script I have would produce. The old script would look for links that are being used multiple times and then just version the link which is fine. What I am finding this that although a document may have one image linked 9 time 6 times out of the nine the image is scaled and rotated the same amount and the other 3 times the rotation and scaling also match. In this example the image only needs 2 versions the first as the original and the second with the scale and rotation of the image used 3 time let say.
So to the code:
The following code will work through the doc and create an array of the links as duplicates:
function LinkUsage(myLink) {
    var myLinkCounter = 0;
        for (var myCounter = 0; myCounter < myDoc.links.length; myCounter++) {
        if (myLink.filePath == myDoc.links[myCounter].filePath) {
            myLinkCounter++;
    return myLinkCounter
var myDoc = app.activeDocument;var myNumLinks = [];
for ( var t = myDoc.links.length-1; t >= 0; t-- ){
    if(LinkUsage(myDoc.links[t])>1){
            myNumLinks.push(myDoc.links[t].id);
Is there a way to loop through the array and only flag the differnent scale and roatations. What I should get is that out of the multiple link uasage the image is only changed twice out of the 9 times used.
I was trying to loop through the array and then loop through it within the loop to compare the link but this does not work for obvious reasons.
for (var i=0 ; i <myNumLinks.length; i++){
    var valLink = myDoc.links.itemByID( myNumLinks[i]);
        if(valLink.parent.constructor.name == "Image"){
            for (var j=0 ; j<myNumLinks.length; j++){
                if(myDoc.links.itemByID( myNumLinks[j]).parent.constructor.name == "Image"){
                    if(valLink.parent.parent.images[0].rotationAngle != myDoc.links.itemByID( myNumLinks[j]).parent.parent.images[0].rotationAngle){
                        $.write(myNumLinks[i]+"\n");
Is what I am trying to do possible and if so any suggestions would be appreciated.
Cheers, John.

I think I might be one step closer to getting this to work. I've been able to just capture the file path of the duplicates using:
//count the number of times the link is used
function LinkUsage(myLink) {
    var myLinkCounter = 0;
        for (var myCounter = 0; myCounter < myDoc.links.length; myCounter++) {
        if (myLink.filePath == myDoc.links[myCounter].filePath) {
            myLinkCounter++;
    return myLinkCounter
//check if the filepath has been added to the array
function chkVal(val){
    var compCount = 0;
    for(var arr = 0; arr < myNumLinks.length; arr++){
        if(val == myNumLinks[arr] ){
        compCount++;
    if(compCount >=1){
        return false;
        }else{
            return true;
//check the links inthe doc
var myDoc = app.activeDocument;
var myNumLinks = [];
for ( var t = myDoc.links.length-1; t >= 0; t-- ){
    if(LinkUsage(myDoc.links[t])>1){
        if(myNumLinks == 0){
            myNumLinks.push(myDoc.links[t].filePath);
            }else{
                if(chkVal(myDoc.links[t].filePath)){
                    myNumLinks.push(myDoc.links[t].filePath);
for (var i=0 ; i <myNumLinks.length; i++){
    $.write(myNumLinks[i]+"\n");

Problem in Creating .wsdl file and mapping.xml with ant

hi
i am created my .wsdl file and mapping.xml file with wscompile tool but when i run this by ant tool it show a problem.
the command runs on command prompt but when run throught ant file it shows a following error :-
Execute failed: java.io.IOException: CreateProces: wscompile -define -mapping build\classes\META-INF\mapping.xml -d . -nd build\.................and so on
so if anybody have any idea then plz help me asap
thanx

The following Ant snippet is the way I've defined my wscompile task. I'm creating a web application and it looks like yours might be an EJB endpoint, but you can adjust where necessary:
<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">
     <classpath refid="compile.classpath" />
</taskdef>
<target name="init">
     <echo message="-------- ${appname} --------" />
</target>

     <target name="generate-server-from-WSDL" depends="init">
          <wscompile fork="yes"
                       keep="true"
                       base="${basedir}/WebContent/WEB-INF/classes"
                       import="true"
                       features="wsi"
                       xPrintStackTrace="true"
                       verbose="true"
                       mapping="${basedir}/WebContent/WEB-INF/jaxrpc-mapping.xml"
                       sourcebase="${basedir}/src"
                       config="${config.server.doclit.file}">
               <classpath>
                    <path refid="compile.classpath" />
               </classpath>
          </wscompile>
     </target>
     <target name="compile-server-from-WSDL" depends="generate-server-from-WSDL">
          <javac srcdir="${basedir}/src" destdir="${basedir}/WebContent/WEB-INF/classes" debug="${compile.debug}">
               <classpath refid="compile.classpath" />
          </javac>
     </target>Just make sure that the named destination directories exist before you run the script.
If you'd like more details on the wscompile Ant task, I found the following pages invaluable:
https://jax-rpc.dev.java.net/whitepaper/1.1/index-part1.html

Scale and map

Similar Messages

Maybe you are looking for