Scanning $subject for multiple occurrences of a character
Hi,
I just wanted to know if it is possible to use the GUI to check for a character threshold greater than one in the subject header.
We are seeing subjects like: this_is_a_hundred_percent_spam_header
and would want to block this kind of messages.
Any idea?
thank you,
SergioC
Can you clarify on what you mean by "character threshold greater than one in the subject header" ?
when you say mulitple occurrence of a character, do you mean a repeat like "testssss" where the "s" is repeating?
What is it about this subject, " this_is_a_hundred_percent_spam_header
" that you're trying to match?
Hi,
I just wanted to know if it is possible to use the GUI to check for a character threshold greater than one in the subject header.
We are seeing subjects like: this_is_a_hundred_percent_spam_header
and would want to block this kind of messages.
Any idea?
thank you,
SergioC
Similar Messages
-
How to Search and Array for multiple occurrences of a value
Hi,
I am trying to search an array of doubles for a number and report the index location(s) of a number. I.e. -allow for repetition. Search and report all index[i] where the number is contained in the array. For example I have
double[] myInputArray = new double[5];
double[] myInputArray = { 1, 2, 3, 3, 5 }I know how to search through the array ONCE and return the first occurrence of a number:
public double GetIndexOf(double Number) {
for (int i=0; i<myInputArray.length; i++) {
if (myInputArray[i] == Number){
return(i);
return(-1);
}How do I expand this code to report multiple index[i] locations if the number reoccurs in the array like the number 3 does in my example array above?The way the Java libraries do this type of operation (String.indexOf(), etc) is to specify the starting index along with what you want to find.
Changing your example slightly (notice how I fixed your naming and more importantly, your return type):
public int indexOf(double num) {
return indexOf(num, 0);
public int indexOf(double num, int fromIndex) {
for (int i=fromIndex; i<myInputArray.length; i++) {
if (myInputArray[i] == num){
return(i);
return(-1);
//usage to get all indices:
for ( int index = -1; (index = indexOf(num, index+1)) != -1; ) {
System.out.println(index);
}Note that due to how floating point numbers work, you may find doing this on doubles (or any other operation that uses == with double arguments) to give you unexpected results. -
Scaner application for OfficeJet 6500A doesn't have automatic selection of scan source anymore
Hi!
I used Officejet 6500A and old driver (OJ6500_E710a-f_231.exe) which is work great.
I try newer driver (OJ6500_E710a-f_1315.exe) and have issue - I must choose scan source for multiple pages PDF scan!!!
I solved issue by using older driver. But now I install Windows 8.1 and I can't install older driver anymore!!!
With older driver (..._231) scanner application automatically scan from ADF if I put some page(es) inside, or from flatbed if ADF is empty.
With newer driver (..._1315 <and ..._1315-1 which is compatible with Windows 8.1>) scanner application force me to choose scan source - and I can't mix pages from different sources in single multipage PDF!!!
Does anyone now how to install old driver (..._231) on Windows 8.1 or how to tweek current driver/application to automatically choose beetwen ADF and flatbed?
Thanks in advance.Hi X-23,
Thanks for your proposed solutions. I'll probably try some of them in next couple of days, but for now I found solution which is good enough for me:
I installed Virtual Machine running Win7 and install old driver - and I can mix different sources in single PDF document again!
Thanks for your effort.
Best regards,
Macak -
How do I make multiple text bold, for example scene headings or character names?
How do I make multiple text bold, for example scene headings or character names?
You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny -
Keep switch channel selected for multiple steps in a scan list
Hi,
I have 3 switches (PXI-2575), one to apply a source to a given line, one to apply a sink, a one to apply a DMM. I have all three switches triggering off each other as well as a DMM (PXI-4070). I apply a source to any given line with the source switch and then cycle through other lines using the DMM switch. Problem is i want to keep the wear on the relays of the source switch to a minimum (for each cycle through the DMM lines I'm selecting same source pin multiple times!). Is there a command for scan lists or some way of setting up the switches so that this can be done?
I thought it might be possible to use the debounce command ';' on its own to signify that i don't want to change the channel selection but this does not appear to work, the DMM times out whilst waiting for a trigger on the second reading. Simplified example scan list that i currently have:
Break Mode: No Action
Source Switch: ch0->com;;;;~ch0->com & ch1->com...
DMM Switch: ch100->com;~ch100->com & ch101->com;~ch101->com & ch102->com;~ch102->com & ch103->com;~ch103->com & ch100->com...
I've also tried selecting the same channel in subsquent scan list entries which flags up error saying explicit connection already exists between the channels.
So is the only possibility just to needlessly wear out the relays?!Hi leon007,
I can understand your desire to keep the wear on the relays of the Source switch to a minimum. I have a few questions, but we should be able to get the application working without needlessly wearing out the relays.
1. Can I assume you are using NI-SWITCH to program this application? If you are using the NI-DAQmx Switch API, please let me know.
2. When you state "I have all three switches triggering off each other as well as a DMM", can I assume (leaving out the Sink switch for now) the scan advanced output of the Source switch (TTL0) is sent to the trigger input of the DMM switch (TTL0), the scan advanced output of the DMM switch (TTL1) is sent to the trigger source of the DMM (TTL1), and the measurement complete destination of the DMM (TTL2) is sent to the trigger input of the Source switch (TTL2)?
3. If you are still having troubles after this post, I would like to know the following so I can assist in testing the issue: What versions of NI-DAQmx and NI-SWITCH do you have installed?
OK, that's it for my questions. Now for yours. Unfortunately, the debounce command ';' didn't work because it is simply a dummy entry - without creating a connection no scan advanced signal will be sent. I've noticed this is not documented well in our help file, and I apologize for that. However, attempting to create a connection where one already exists should be an error. Either the user is attempting to redundantly connect channels (which shouldn't happen if niSwitch Get Relay Position is used), or there is a driver issue.
To keep the relay wear to a minimum, I want to suggest a couple of ideas.
1. Use only one trigger line for the DMM's measurement complete and one trigger line for all the switches scan advanced outputs. To use this option, it cannot matter in your application which switch operates first, and which operates last. The switch that always makes a connection (the DMM switch) will send a scan advanced output trigger with a set scan delay (configured in niSwitch Configure Scan Trigger) that should accommodate for all the switches. This option may add delay in your application, but you will save relay life.
2. Use the DAQmx Switch API and the '&&' command between seperate switch connections. In the DAQmx Switch API, you use just one scan list for all switch modules. For example, we would perform the example scan list entries you provided with the following scan list:
/Source/ch0->com && /DMM Switch/ch100->com; ~/DMM Switch/ch100->com & /DMM Switch/ch101->com; ~/DMM Switch/ch101->com & /DMM Switch/ch102->com; ~/DMM Switch/ch102->com & /DMM Switch/ch103->com; ~/Source/ch0->com & /Source/ch1->com && ~/DMM Switch/ch103->com & /DMM Switch/ch100->com...
The above connects the Source switch CH0 to COM, waits for the relays to settle, connects the DMM switch CH100 to COM, sends the scan advanced output signal, and waits for the trigger input before executing the next scan list entry. This method will keep an order to the madness, as you will have the power to decide which switch operates first, and which operates last.
Let me know if I assumed anything incorrectly or if neither option works for you!
Chad Erickson
Switch Product Support Engineer
NI - USA -
'Activation error..' message when uploading rules for multiple territories
Hi All,
When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
The create_rule() and save_rule() methods of CL_CRM_FDT class and FM CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
Kindly suggest some ways to unlock or any other alternatives.
Thanks & Regards
JagathshreeHi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results. -
"BDC for multiple line items of PO"
I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
FORM transaction_bdc .
DATA :
v_cnt(2) TYPE n,
v_bst(2) TYPE n,
v_bn TYPE i,
v_bstpo(25),
v_ebtyp(25),
v_menge(25),
v_eeind(25),
v_xblnr(25),
v_xblnr1(25),
v_ebelp(2) TYPE n,
v_ebelpt(2),
v_menge1(11),
v_ebt TYPE i,
v_vebtyp LIKE ekes-ebtyp,
v_eb(2) TYPE n,
v_tcselflag(40),
v_tem(2) TYPE n,
v_correct TYPE i,
v_file TYPE string.
DATA: ls_outtab TYPE tb_struc.
DATA: l_valid TYPE c,
l_locked TYPE c.
CALL METHOD g_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid EQ 'X'.
LOOP AT tb_output WHERE check EQ 'X' .
MOVE-CORRESPONDING tb_output TO itab_output.
APPEND itab_output.
CLEAR itab_output.
ENDLOOP.
IF tb_output-check <> 'X'.
MESSAGE e003 WITH text-004.
ENDIF.
ENDIF.
IF itab_output[] IS NOT INITIAL.
PERFORM open_group.
***looping at purchase order level.
LOOP AT itab_output where ebelp is not initial .
CLEAR v_bn.
CLEAR v_ebt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06E-BSTNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RM06E-BSTNR'
itab_output-ebeln.
***Changing alphanumeric fields and quantity fields to character type**
*v_ebelp = tB_OUTPUT-ebelp.
*clear v_ebelpt.
*v_menge1 = tB_OUTPUT-menge.
*v_ebelpt = v_ebelp.
***End Of Changing**
*Checking for the exact number of the item**
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
v_bst = v_bn + 1.
*End Of Checking**
**Mapping items**
v_tem = 1.
CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=DETA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EKPO-BSTAE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BSTA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_field USING v_tcselflag
'X'.
**Checking weather Confirmation category already exists**
SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
itab_output-ebelp AND ebeln = itab_output-ebeln.
ENDSELECT.
IF sy-dbcnt > 0.
v_ebt = sy-dbcnt.
ENDIF.
v_eb = v_ebt + 1.
**End Of Checking**
**For Line items**
CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
**End**
PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_xblnr.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING v_ebtyp
itab_output-ebtyp.
PERFORM bdc_field USING v_eeind
itab_output-eindt.
PERFORM bdc_field USING v_menge
v_menge1.
PERFORM bdc_field USING v_xblnr
itab_output-xblnr.
**End Of Mappings**
*loop at itab_output.
MOVE-CORRESPONDING itab_output TO ekes.
modify ekes.
MOVE-CORRESPONDING itab_output TO eket.
MODIFY eket.
MOVE-CORRESPONDING tb_output TO ekpo.
MODIFY ekpo.
ENDLOOP.
CALL TRANSACTION 'ME22N'
USING itbdc
MODE 'E'.
commit work.
perform bdc_transaction using 'ME22N'.
**End Of Purchase Order Loop**
PERFORM close_group.
endloop.
endif.Hi Asha,
check the below code once...
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
Regards,
Satya. -
The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
internalName = "No Edit",
title = "Clear Edit History",
type = "Develop",
value = {
settings = {
NoEdit = true,
uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob -
How to check the occurrence of a character in a string
Hello Experts,
I have a scenario where in I have to check the occurrence of a character in a string and based on that I have to pass a data into target field.
I was wondering whether this can achieved with mapping functions or Do I have to use an UDF.
Thanks in advance.
Regards
Advit RameshHi Advit,
You can achieve this by using standard function indexOf from the text category. Pass in the input string and the character value you want to check for as the input.
Standard Functions (SAP Library - SAP Exchange Infrastructure)
If the output is -1, then the character is not in the string, otherwise it is.
Rgds
Eng Swee -
How to search for multiple values with Bex Prompts
Hi,
I would like to know if it is possible to search for multiple values at the same time with Bex Prompts instead of searching one value at a time (please see the screen shot below). I searched the forum couldn't find any relevant answers. please let me know how to achieve?
Thanks,
Charvi.Hi Charvi,
You can use wild card search to ensure you get multiple similar values listed as search output.use * for multiple characters and ? for single character.
For Example, Ravi * would result you all employees with first name as Ravi
You can use various search formats such as * Ravi * and * Ravi and Ra?? etc.
Thanks
Mallik -
Prompt used as view selector for multiple reports
Hi All,
Can a dashboard prompt be used as View Selector for multiple reports? If yes, please let me know how?
Thanks
SumitaHi Sumita,
You can do this with Dashboard prompts, but it's a little tricky. I'll highlight the process below. Keep In mind I assume you have three reports already created and have three views: View 1, View 2 and View 3.
Phase I: The Dashboard Prompt
1. Create a new dashboard prompt.
2. Add any single column to your prompt. It doesn't really matter which one (just make sure nothing is prompted on it to be safe).
3. For the sake of this example, I'll assume we added column: "Test Folder"."Test Field"
4. Make sure your Operator is "is equal to/is in"
5. Make sure the control is "Drop-down List"
6. Change the Show to "SQL Results"
7. Write a SQL statement similar to the following (TEST =<your subject area>, "Test Folder"."Test Field" = <your column>):
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 1' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 2' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 3' END
FROM TEST
**Note: The reason why we need to do the CASE statement is because every logical query needs at least 1 presentation column. The case statement is a way to include the presentation column, but since the statement 1=2 is never true, we always use the ELSE condition.
8. Set a presentation variable. Call it VIEW_PVAR
9. Have the Prompt default to Specific Value: View 1
10. Save the Dashboard Prompt and put it into the Dashboard with your reports.
Phase II: Filter Reports
1. Create a new Answer request
2. Bring in your test column twice
3. Change the formula (fx) on the second column to be: '@{VIEW_PVAR}{View 1}'
4. Now add a filter to the presentation variable column
5. Set the operator to "is equal to/is in' and set the value to: View 1
6. Save the Request as "View 1 Filter"
7. Change the value in the filter to: View 2
8. Save the Request as "View 2 Filter"
9. Change the value in the filter to: View 3
10. Save the Request as "View 3 Filter"
Phase III: Guided Navigation
1. Create three sections in your dashboard
2. Rename each section to: View 1, View 2 and View 3 respectively
3. For each of the sections, do the following:
3a. Click on properties
3b. Click on Guided navigation
3c. Set the Guided Navigation to the appropriate Filter report
4. For each of the three sections, do the following:
4a. Add in all three requests
4b. Click on the request properties and select Show and the appropriate view for that section
5. Save your changes to your Dashboard
Good luck and if you found this post useful, please award points!
Best regards,
-Joe -
Object type for multiple/text/unrestricted property
Hi,
Does anybody know what's the object type for multiple/text/unrestricted property.
I tried to use um:setproperty tag to set the value of a multiple/text/unrestricted
type property in jsp. I got the following error if the object type I use is ArrayList:
javax.transaction.TransactionRolledbackException: Transaction: '995540362044_8798'
rolled back due to EJB exception:
java.rmi.RemoteException: EntityPropertyManagerImpl.insertTypeSpecificValue():
caught ClassCastException. The reason might be because the type of the passed
value does not mismatch the property type stored in schema information. Expected
object type is: 3 and the object type was: java.util.ArrayList
Does anybody know what's this type 3 object?
Br,
-Niyue Chen
Hi All,
I need to convert the amount value in comma to dot say 1000,00 to 1000.00.Any function module is there to convert it.After converting it i need to pass this value as exporting parameter to a function module having data type as character(lenght 13).
Thnks
Deb -
Generic HTTP URL For Multiple Interfaces
Hi All,
Please suggest on the following requirement. I am using PI 7.31 Single stack (Java only version).
There are multiple HTTP to Proxy interfaces and each interface has different source structure.
The requirement is --- How to utilize a single HTTP URL for all the interfaces.
The major challenge is the source structure for all the interfaces is different.
Kindly Suggest....
Regards,
Nitin...Hi Nitin,
One solution is to create one sender interface (with either multiple operation of each interface or having all structure in different node and optional occurrence), then use operation specific mapping.
refer the below example for multiple operation scenario
Setup Multiple Operations Scenario in ESR and ID
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?overridelayout=t…
regards,
Harish -
NT startup parmaters for multiple weblogic servers started as a service
I have the need to start multiple weblogic servers, using NT services.
I have created a second folder with a properties file listening on another
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is their anyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
ThanksThe answer is...
- Use a product to turn applications into an NT Service (e.g.
ServiceMill)
- Directly run the Weblogic Server Java class via that application
--> As many WLs on one machine as you like.
Send mail if you need specific details.
Best regards
Daniel Hoppe
-----Original Message-----
From: [email protected] (Ed) [mailto:[email protected]]
Posted At: Wednesday, August 30, 2000 2:34 AM
Posted To: install
Conversation: NT startup parmaters for multiple weblogic servers started
as a service
Subject: Re: NT startup parmaters for multiple weblogic servers started
as a service
I wish that was the case.
The problem is, while you enter the startup parameter once, it only
is good for that startup of the weblogic server,
The next time the server reboots and the services start, unless you
re-enter the startup parameter -J-Dweblogic.system.name=Foldername
The weblogic server starts using the wrong properties file.
Is their anyway using NT services to have the correct instance of WL
to start everytime.
I have checked this newsgroup and this question has been posted
before, but so far no one seems to have the answer.
I know in a production eniviorment someone must be running more that
one instance of a WL server as a service, Hopefully their is an
answer on how this is done.
Thank you
Kumar Allamraju <[email protected]> wrote:
Not that i know of.
but you are specifying this startup parameter only one time too!!!
Kumar
None of your bussines wrote:
I have the need to start multiple weblogic servers, using NT
services.
I have created a second folder with a properties file listening onanother
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is theiranyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
Thanks -
Query for multiple invoice numbers.
Hi,
My question is if I can add multiple invoice numbers in the search field "invice number"?
For example when I receive a balance confirmation request from a supplier and their list contains 10 invoices. Can I do a search for all 10 at the same time or I can olny do a search one by one?
Thank you!
AngieHi,
there's no direct possibility to query for multiple Invoice number in terms of entering e.g. 5 number for a query.
But you can work with placeholders '_' and '%' to find multiple invoices at one time. Underscore sign stands
for exactly one character which can have multiple value, percentage sign for multiple ones.
Example (assuming you are using letters and numbers for invoice numbering):
When entering 'A12_' as search String, invoices from 'A120' to 'A12z' would be found.
When using 'A12_01_' all invoices from 'A120010' to 'A12z01z' would be found.
When using 'A12%' all invoices starting with 'A12' - no matter about the rest would be found.
These are only a few examples but i think when using a clever combination of wildcards and parts of the
invoices - which often share a common component, if the invoices come from the same vendor - you'll get
at least a small step farther.
Regards
Maybe you are looking for
-
How can i stop my mb from sleeping when i close the lid?
Probably very obvious, sorry about that, but any help you be appreciated
-
How to specify ");" as a regular expression in split method of String class
How to specify ");" as a regular expression in split method of String class using delimeters?
-
Set custom generated password during create user and email to user
Hi, In OIM 11g r2, I want to generate password using some logic and send a notification to the user with the generated password during user creation. Please let me know how to achive that.. can I use some post process event handler?? if yes then how
-
Can't restore my iPhone 3GS (w/iOS5); backup session failed.
I'm practically at wits end, here. For two days I've been trying to restore my iPhone 3GS and so far, nothing. The problem happened after I downloaded and updated my iPhone with iOS5. When I tried to restore it from one of three back-ups that I had
-
Tracking number for the iPhone 6 Plus
My card was charged last night for the iPhone 6 Plus order, and there was a tracking number generated for my order. However, it starts with 1Z047V, and I couldn't track it on Fedex's website (it says the tracking number is invalid). I searched the tr