SCCM 2012 Operating System - is it the recommended OS today

I would like to confirm that the 2012 server Operating System is the preferred OS for SCCM 2012 at this time.
Is it performing well without issues?
I would like to upgrade from SCCM 2007 using 2003 OS to SCCM 2012 with 2012 Server Standard.
K. Smith

All supported OSes will work, but I'd use the lastest one (Server 2012 R2) if possible.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • SCCM-2012 Operating system Deployment

    Hi All,
    We are planning to deploy/upgrade the win-8 using SCCM-2012.Please give me the steps how we can start.
    provide the step by step procedure.
    Thanks......

    Hi,
    Here is a video for your reference.
    Deploying Windows 8.1 using Windows Server 2012 R2, WADK, MDT and WDS
    http://www.youtube.com/watch?v=yeh_YV4VH70
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

    The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08.  You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
    iLife 08's full system requirements are:
    Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
    iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
    iDVD ’08 requires 733MHz or faster processor
    512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
    3 GB of available disk space
    DVD drive required for installation
    From: http://support.apple.com/kb/HT1010
    OT

  • Upgrade to SCCM 2012 R2 Failed - Can I Simply Move SCCM Database to Replacement SCCM 2012 R2 System?

    I started with SCCM 2012 RTM and attempted an upgrade to SCCM 2012 R2.  The upgrade failed and left the the system unusable.  I was able to recover the entire system (single server) from backup.  
    Rather than risk another failed upgrade can I simply build a new server and move the existing SCCM database to a new SCCM 2012 R2 system?

    Hi,
    Here is an official article talks about Upgrade for your reference.
    Planning to Upgrade System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/jj822981.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

    Is there any report in SCCM 2012 to list out all the physcial machine and all the
    virtual machine?
    and list all VMs for each physical server.

    Hi,
    there is no such builtin report but you can easily crete one as all information is in the database.
    http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM / USMT Operating System Deployment

    All -
    Anyone know if there's a hotfix for KB974571, which breaks USMT portion of SCCM's operating system deployment feature.  This is currently a real pain in my side, because i've got about 300 machines that I need to migrate, which all have this patch installed :).. 
    Thanks in advance for any help!
    Jonathan Kloza

    Hi Jonathan,
    This is caused by an embedded NULL value in the certificate friendly name property of the SCCM client certificate. Then the MS security patch MS09-056 (KB 974571 ) block this SCCM client certificate when do the OSD task “Request State Store”.
    Before the cert fix tool is released, as a temporary solution you can manually correct the issue in existing certificates by the procedure below :
    1. On a target agent, run "mmc.exe", click File> Add/Remove Snap-in, click Add,
    highlight the Certificates snap-in, and click Add.
    2. In the Certificates snap-in dialog box, choose "Computer account", click Next,
    and click Finish.
    3. Click Close to close the Add Standalone Snap-in dialog box, and click OK to
    close the Add/Remove Snap-in dialog box.
    4. Browse to Certificates (Local Computer)> SMS> Certificates. You will have two
    certificates in the right pane -- SMS Encryption Certificate and SMS Signing
    Certificate.
    5. Double-click to open one of the certificates, say SMS Encryption Certificate.
    6. On the Details tab, click Edit Properties.
    7. Edit the Friendly name to make it something like “SMS Encryption
    Certificate1”.
    8. Click OK to close the two dialog boxes.
    9. Double-click to open the certificate again. Edit the Friendly name back to “SMS
    Encryption Certificate”. Click OK to close the two dialog boxes.
    10. Repeat the steps 5 - 9 on the other certificate.
    11. Try the OSD again.

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application reque

    hello,
    i getting the following error message in event id while backing up my SQL db by third party backing tool
    BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
      <Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
    please suggest the solution.

    Hi pulkit,
    According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
    NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
    you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
    https://support.software.dell.com/kb/SOL14674
    In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
    Perform the following tasks as appropriate:
     1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
     2. Ensure that the backup and restore medium has sufficient space.
     3. Correct any errors raised by third-party backup and restore software.
    There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
    http://technet.microsoft.com/en-us/library/ms187510.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Dear ladies and gentlemen! I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Ad

    Dear ladies and gentlemen!
    I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
    Sincerely, Walter Hacksteiner
    mailto: [email protected]

    The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
    The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode.

  • How does client invoke an operating system command in the Server machine.?

    Guys,
    Is there any way that a client could trigger an operating system command on the Oracle Server machine?
    I've a VB scipt file in the server machine.My requirement is to execute that VB file on the server machine.(The script would essentially create a DSN on the server machine).
    The normal way to execute a VB script would be to specify the name of the file in the command prompt.(If my VB script ONDEMAND.VBS resides in C:\ONDEMAND folder,I need to execute the statement
    "C:\ONDEMAND\ONDEMAND.VBS" in the command prompt to get it executed.)
    I would utilise the SQL command below
    HOST C:\ONDEMAND\ONDEMAND.VBS
    to invoke it programatically(from a PL\SQL scipt).
    Can someone help me in utiliting HOST command in Oracle(Or by any other means) for a client database operation to execute an Operating system command in the Oracle server machine?
    Thanks,
    Bhagat

    Hi Bhagat,
    This has been asked several times recently:
    Executing Shell Script from PL/SQL Block
    Fire an executable using oracle
    Cheers,
    Colin

  • I downloaded the new operating system and now the Bluetooth in the car does not play my music.  All the songs show the cloud with a red arrow pointing down. How do I download all of them again to my I phone please?

    I downloaded the new operating system and now the Bluetooth in the car does not play my music.  The music on the phone show the cloud and the red arrow pointing downwards.  How do I download all the music again to my phone please?

    I have an ITunes account.  I got it when I got my IPOD.  I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need.  I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has.  I don't need to be concerned with documents, mail, attaching to Facebook or playing games.  I can do all that on my phone.  I just want to maintain my music between 3 devices.
    So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this?  And how do I get my music back?  Will it show up once I cancel my account?

  • I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

    I have purchased a mac mini only to find I am unable to run Logic pro 9 , is there any way this can be achieved? It has been suggested that I partition the drive and install a copy of an older operating system to run the Logic Pro, is this feasible?

    BDAqua wrote:
    ....but some other new Macs will boot frome a clone of 10.6.8...
    Only with a whole lot of effort and instability.  As the new Minis have
    hardware (HD4000, USB 3.0, etc.) that is totally unsupported in old OSes.
    The only option would be to see if it would work by installing in a virtual machine
    running 10.6.8.  I'm sure there will be some performance hit but whether it would
    be enough to be unusable is the question.

  • HT1688 I upgraded my Iphone 4s with the new operating system.  After the upgrade was performed all my contacts were lost.  How do I recover my phone contacts?

    I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost.  How do I recover my phone contacts?

    Synch them back from whatever contact manager or cloud service you stored them in.

  • My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work?  This was sent to me from Apple after my previous Nano was recalled.

    My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work on windows XP?  This was sent to me from Apple after my previous Nano was recalled.

    I think you've anwsered your own question. If it does'nt meet the minimum spec it won't work.

  • An error was received while reading backup file- Cancelling Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).

    Hi,
    We have been getting the below error while restoring a database onto SQL Server 2008. We are using lite speed and performing a full restore. When we restart the server, the restore is completed cleanly but every 3 or 4 days once, the restore is failing.
    We have tried everything from installing a patch that was supposed to fix it but it is not.
    Error Message:
    BackupIoRequest::ReportIoError: read failure on backup device 'VDI_7D17E958-2468-45A8-B7F0-EB73D0BF0F3A_3'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
    The backup is getting validated successfully but failing while trying to read it. Any help would be greatly appreciated.
    Thanks,
    Sree

    Hello,
    I would try to get the latest update for the LiteSpeed software, based on the following thread:
    http://www.red-gate.com/messageboard/viewtopic.php?t=5968
    Please read the following article too:
    http://troubleshootingsql.com/2011/02/09/troubleshooting-that-darn-backup-error/
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

Maybe you are looking for

  • Enhance 0FC_OP_01 datasource for Open Items (FI-CA).

    Hello All, I am trying to enhance the business content extractor for open items in R/3 . The data source is 0FC_OP_01. i know this is coming from the table DFKKOP. I need to add sub GL ffield rom another table from DFKKOPK . Please advise the step by

  • Oracle 9i and PreparedStatement Date Problem

    Hi, I am working with Oracle 9i and it's version of the classes12.zip driver and I am having difficulties in storing a date value using a PreparedStatement. I only care about the date, but I have tried going the Timestamp route as well and get the sa

  • Dynamic queries

    I am trying to use "? parameter style" to execute dynamic queries at runtime on the view object. I was sucessful in using this for the rowsetInfo but i want to do this for a view object. I cant seem to call the new queries after i assign the new wher

  • Migrate OSX iTunes library to Windows 7

    I just got a new Windows 7 laptop - all my old music is in iTunes from my Mac. One complicating factor: I was on OS X 10.3 so iTunes version was something like 6 or 7. Now I'm using iTunes 10 on Windows 7. I copied my Mac iTunes files into C:\Users\<

  • Sales Order - entering order lines is very slow

    When Sales Order form is opened and order lines are being entered; right after entering a partial item number, LOV appears and then when item number is selected from the LOV, the cursor takes about 25 to 80 seconds to reach the next field. Has anyone