SCCM 2012 R2 bitlocker reporting via "Computers running a specific service"

I have searched the web for how to check how many clients have bitlocker enabled, via SCCM 2012 R2. All suggestions I find are SQL commands.
I have not found anyone who suggest using the report Operating System -> Services - Computers running a specific service -> Bitlocker Drive encryption service
Why is that? Is this report not trustworthy?
Kthxbai

Hi,
The service is used for prompting user's actions or storing encrypted information. It does not mean BitLocker is enabled when the service is running or not. You can start it manually. I suggest you refer to the blog below to utilize DCM to check if the Bitlocker
is enabled.
http://adminnexus.blogspot.com/2012/11/using-dcm-in-sccm-2012-to-report-on.html
Juke Chou
TechNet Community Support

Similar Messages

  • SCCM 2012 R2 Computer reports not displaying users and domain information for some systems.

    I have a recently deployed SCCM 2012 R2 server which has been running well so far.
    I have, however, noticed in the reporting (example: "Computers in a specific site" report) that some computers are not showing information like "User domain" and "User Name" (for about 500 of the 1500 computers).
    If I go to a collection, select such a computer and right click to properties and go to the general tab I can see that the below fields are blank:
    Last Logon User Domain
    Last Logon User Name
    All other fields are populated similarly for both affected and non-affected agents. Agent versions are the same as well. Hardware/Software inventory appears to be completing on all systems.
    Has anyone else seen this type of behavior and found a solution? Appreciate any advice. Thanks.
    Edit: Most agents have been installed for close to 2 months.
    Hardware inventory: Daily
    Software inventory: Weekly

    Hi,
    Those two values are populated by the Heartbeat agent and if no user is logged on when the heartbeat is sent, then the value is blank so I would say this would be as expected.
    If you want to know which user has been using a computer you should have a look at the assett Intelliengence reports with console usage, then you can see who has been using a computer most frequently.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM 2012 R2 Install - Reporting Services Point, Remote SRS Server

    Hi all,
    Here's a brief run down of the setup so far. SCCM 2012 R2 installed on Windows 2012 R2 (SCCM01). SQL 2012 back end is off box, on a separate cluster (SQL01C01). Reporting Services for SQL 2012 is due to be installed on a different server (SRS01).
    My question is, when I come to sort out Reporting Services in SCCM, will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
    I realise I could simply wait for the sql guys to sort the install of SRS and then test it myself but it might be a while before that gets done so I thought I'd ask....Thanks for the help

     will I simply need to add SRS01 into SCCM as a Site System Server and install the Reporting Services Point onto SRS01?
    Correct, although the other way around. Remember you have to make SCCM01$ a local administrator on SRS01.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Detection State 'Unknown' in SCCM 2012 Software Compliance Report

    My management is looking for windows patches compliance reports from SCCM 2012
    When I am trying to prepare Compliance Reports with SCCM 2012 for windows patches, I am noticing that I have lots of patches, where "Unknown" state is showing against many Windows Patches. I was expecting the reports to show “Not Required"
    instead of "Unknown".
    Please tell me, where the issue might be and how to rectify it.
    Thanks in advance.

    Thanks for your reply Jorgen. Is there anyway I can initiate a " Software Update Scan on all Clients from SCCM Console? If yes, please let me steps- how?
    As a test, I run "Software scan from a client and client report back to server. However on WindowsUpdates.log I can see some unhappy logs.
    Does it mean that WSUS server and clients are having some issue?
    2014-08-03 16:43:56:773  840 1668 AU ##  END  ##  AU: Search for updates [CallId = {6E29C07F-4A2B-4137-8228-D47F81523EFD}]
    2014-08-03 16:43:56:773  840 1668 AU #############
    2014-08-03 16:43:56:773  840 1668 AU AU setting next detection timeout to 2014-08-03 11:43:56
    2014-08-03 16:44:01:664  840 110c Report REPORT EVENT: {F5E38138-DE94-45D1-A8D0-79C4C8667568} 2014-08-03 16:43:56:664+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
    Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2014-08-03 21:43:56:923  840 a4c AU #############
    2014-08-03 21:43:56:923  840 a4c AU ## START ##  AU: Search for updates
    2014-08-03 21:43:56:923  840 a4c AU #########
    2014-08-03 21:43:56:923  840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
    2014-08-03 21:43:56:923  840 d58 Agent *************
    2014-08-03 21:43:56:923  840 d58 Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-03 21:43:56:923  840 d58 Agent *********
    2014-08-03 21:43:56:923  840 d58 Agent   * Online = Yes; Ignore download priority = No
    2014-08-03 21:43:56:923  840 d58 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
    or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
    2014-08-03 21:43:56:923  840 d58 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-03 21:43:56:923  840 d58 Agent   * Search Scope = {Machine}
    2014-08-03 21:43:57:439  840 d58 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
    2014-08-03 21:43:57:454  840 d58 Misc  Microsoft signed: Yes
    2014-08-03 21:43:57:454  840 d58 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
    2014-08-03 21:43:57:454  840 d58 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
    2014-08-03 21:43:57:454  840 d58 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
    2014-08-03 21:43:57:454  840 d58 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
    2014-08-03 21:43:57:454  840 d58 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
    2014-08-03 21:43:58:782  840 d58 Agent   * WARNING: Exit code = 0x800B0001
    2014-08-03 21:43:58:782  840 d58 Agent *********
    2014-08-03 21:43:58:782  840 d58 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-03 21:43:58:782  840 d58 Agent *************
    2014-08-03 21:43:58:782  840 d58 Agent WARNING: WU client failed Searching for update with error 0x800b0001
    2014-08-03 21:43:58:782  840 11f8 AU >>##  RESUMED  ## AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
    2014-08-03 21:43:58:782  840 11f8 AU   # WARNING: Search callback failed, result = 0x800B0001
    2014-08-03 21:43:58:782  840 11f8 AU   # WARNING: Failed to find updates with error code 800B0001
    2014-08-03 21:43:58:782  840 11f8 AU #########
    2014-08-03 21:43:58:782  840 11f8 AU ##  END  ##  AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
    2014-08-03 21:43:58:782  840 11f8 AU #############
    2014-08-03 21:43:58:782  840 11f8 AU AU setting next detection timeout to 2014-08-03 16:43:58
    2014-08-03 21:44:02:454  840 d58 Report REPORT EVENT: {5653D57E-2599-426E-B3F2-3F626EDC9C8D} 2014-08-03 21:43:57:454+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
    Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2014-08-04 02:43:59:327  840 a4c AU #############
    2014-08-04 02:43:59:327  840 a4c AU ## START ##  AU: Search for updates
    2014-08-04 02:43:59:327  840 a4c AU #########
    2014-08-04 02:43:59:327  840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
    2014-08-04 02:43:59:327  840 1528 Agent *************
    2014-08-04 02:43:59:327  840 1528 Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 02:43:59:327  840 1528 Agent *********
    2014-08-04 02:43:59:327  840 1528 Agent   * Online = Yes; Ignore download priority = No
    2014-08-04 02:43:59:327  840 1528 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
    or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
    2014-08-04 02:43:59:327  840 1528 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-04 02:43:59:327  840 1528 Agent   * Search Scope = {Machine}
    2014-08-04 02:43:59:858  840 1528 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
    2014-08-04 02:43:59:858  840 1528 Misc  Microsoft signed: Yes
    2014-08-04 02:43:59:858  840 1528 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
    2014-08-04 02:43:59:858  840 1528 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
    2014-08-04 02:43:59:858  840 1528 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
    2014-08-04 02:43:59:858  840 1528 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
    2014-08-04 02:43:59:858  840 1528 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
    2014-08-04 02:44:00:577  840 1528 Agent   * WARNING: Exit code = 0x800B0001
    2014-08-04 02:44:00:577  840 1528 Agent *********
    2014-08-04 02:44:00:577  840 1528 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 02:44:00:577  840 1528 Agent *************
    2014-08-04 02:44:00:577  840 1528 Agent WARNING: WU client failed Searching for update with error 0x800b0001
    2014-08-04 02:44:00:577  840 1018 AU >>##  RESUMED  ## AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
    2014-08-04 02:44:00:577  840 1018 AU   # WARNING: Search callback failed, result = 0x800B0001
    2014-08-04 02:44:00:577  840 1018 AU   # WARNING: Failed to find updates with error code 800B0001
    2014-08-04 02:44:00:577  840 1018 AU #########
    2014-08-04 02:44:00:577  840 1018 AU ##  END  ##  AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
    2014-08-04 02:44:00:577  840 1018 AU #############
    2014-08-04 02:44:00:577  840 1018 AU AU setting next detection timeout to 2014-08-03 21:44:00
    2014-08-04 02:44:04:859  840 1528 Report REPORT EVENT: {3121ED76-441E-4862-A90B-9AF1B5170B85} 2014-08-04 02:43:59:858+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
    Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2014-08-04 07:44:00:725  840 a4c AU #############
    2014-08-04 07:44:00:725  840 a4c AU ## START ##  AU: Search for updates
    2014-08-04 07:44:00:725  840 a4c AU #########
    2014-08-04 07:44:00:725  840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
    2014-08-04 07:44:00:725  840 11f0 Agent *************
    2014-08-04 07:44:00:725  840 11f0 Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 07:44:00:725  840 11f0 Agent *********
    2014-08-04 07:44:00:725  840 11f0 Agent   * Online = Yes; Ignore download priority = No
    2014-08-04 07:44:00:725  840 11f0 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
    or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
    2014-08-04 07:44:00:725  840 11f0 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-04 07:44:00:725  840 11f0 Agent   * Search Scope = {Machine}
    2014-08-04 07:44:01:178  840 11f0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
    2014-08-04 07:44:01:178  840 11f0 Misc  Microsoft signed: Yes
    2014-08-04 07:44:01:178  840 11f0 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
    2014-08-04 07:44:01:178  840 11f0 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
    2014-08-04 07:44:01:178  840 11f0 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
    2014-08-04 07:44:01:178  840 11f0 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
    2014-08-04 07:44:01:178  840 11f0 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
    2014-08-04 07:44:01:803  840 11f0 Agent   * WARNING: Exit code = 0x800B0001
    2014-08-04 07:44:01:803  840 11f0 Agent *********
    2014-08-04 07:44:01:803  840 11f0 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 07:44:01:803  840 11f0 Agent *************
    2014-08-04 07:44:01:803  840 11f0 Agent WARNING: WU client failed Searching for update with error 0x800b0001
    2014-08-04 07:44:01:803  840 14dc AU >>##  RESUMED  ## AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
    2014-08-04 07:44:01:803  840 14dc AU   # WARNING: Search callback failed, result = 0x800B0001
    2014-08-04 07:44:01:803  840 14dc AU   # WARNING: Failed to find updates with error code 800B0001
    2014-08-04 07:44:01:803  840 14dc AU #########
    2014-08-04 07:44:01:803  840 14dc AU ##  END  ##  AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
    2014-08-04 07:44:01:803  840 14dc AU #############
    2014-08-04 07:44:01:803  840 14dc AU AU setting next detection timeout to 2014-08-04 02:44:01
    2014-08-04 07:44:06:178  840 11f0 Report REPORT EVENT: {5CC4BC72-612B-4C93-B560-57DEBEF9DD30} 2014-08-04 07:44:01:178+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
    Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2014-08-04 07:56:20:733  840 a4c AU AU was unable to detect updates for more than 48 hours
    2014-08-04 07:56:25:733  840 11f0 Report REPORT EVENT: {BFD85143-59AD-4E15-9797-4CEE9D7F089F} 2014-08-04 07:56:20:733+1000 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software
    Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
    2014-08-04 12:44:01:690  840 a4c AU #############
    2014-08-04 12:44:01:690  840 a4c AU ## START ##  AU: Search for updates
    2014-08-04 12:44:01:690  840 a4c AU #########
    2014-08-04 12:44:01:690  840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
    2014-08-04 12:44:01:690  840 1320 Agent *************
    2014-08-04 12:44:01:690  840 1320 Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 12:44:01:690  840 1320 Agent *********
    2014-08-04 12:44:01:690  840 1320 Agent   * Online = Yes; Ignore download priority = No
    2014-08-04 12:44:01:690  840 1320 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
    or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
    2014-08-04 12:44:01:690  840 1320 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-04 12:44:01:690  840 1320 Agent   * Search Scope = {Machine}
    2014-08-04 12:44:02:143  840 1320 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
    2014-08-04 12:44:02:174  840 1320 Misc  Microsoft signed: Yes
    2014-08-04 12:44:02:174  840 1320 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
    2014-08-04 12:44:02:174  840 1320 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
    2014-08-04 12:44:02:174  840 1320 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
    2014-08-04 12:44:02:174  840 1320 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
    2014-08-04 12:44:02:174  840 1320 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
    2014-08-04 12:44:02:268  840 1320 Agent   * WARNING: Exit code = 0x800B0001
    2014-08-04 12:44:02:268  840 1320 Agent *********
    2014-08-04 12:44:02:268  840 1320 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 12:44:02:268  840 1320 Agent *************
    2014-08-04 12:44:02:268  840 1320 Agent WARNING: WU client failed Searching for update with error 0x800b0001
    2014-08-04 12:44:02:268  840 11a8 AU >>##  RESUMED  ## AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
    2014-08-04 12:44:02:268  840 11a8 AU   # WARNING: Search callback failed, result = 0x800B0001
    2014-08-04 12:44:02:268  840 11a8 AU   # WARNING: Failed to find updates with error code 800B0001
    2014-08-04 12:44:02:268  840 11a8 AU #########
    2014-08-04 12:44:02:268  840 11a8 AU ##  END  ##  AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
    2014-08-04 12:44:02:268  840 11a8 AU #############
    2014-08-04 12:44:02:268  840 11a8 AU AU setting next detection timeout to 2014-08-04 07:44:02
    2014-08-04 12:44:07:174  840 1320 Report REPORT EVENT: {01CB1C52-239F-4DB7-A4AF-C0FBF2E5358A} 2014-08-04 12:44:02:174+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
    Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2014-08-04 16:24:12:878 2748 bc0 COMAPI -------------
    2014-08-04 16:24:12:878 2748 bc0 COMAPI -- START --  COMAPI: Search [ClientId = CcmExec]
    2014-08-04 16:24:12:878 2748 bc0 COMAPI ---------
    2014-08-04 16:24:12:878 2748 bc0 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
    2014-08-04 16:24:12:878  840 1438 Agent *************
    2014-08-04 16:24:12:878  840 1438 Agent ** START **  Agent: Finding updates [CallerId = CcmExec]
    2014-08-04 16:24:12:878  840 1438 Agent *********
    2014-08-04 16:24:12:878  840 1438 Agent   * Include potentially superseded updates
    2014-08-04 16:24:12:878  840 1438 Agent   * Online = Yes; Ignore download priority = Yes
    2014-08-04 16:24:12:878  840 1438 Agent   * Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
    2014-08-04 16:24:12:878  840 1438 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-04 16:24:12:878  840 1438 Agent   * Search Scope = {Machine}
    2014-08-04 16:24:27:769  840 1438 PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-08-04 16:24:27:769  840 1438 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
    http://S-Syd-SCCM.xxx.xxx:80/ClientWebService/client.asmx
    2014-08-04 16:24:27:816  840 1438 PT WARNING: Cached cookie has expired or new PID is available
    2014-08-04 16:24:27:816  840 1438 PT Initializing simple targeting cookie, clientId = fcdcdbf8-529a-414d-9679-9bfbeac1626c, target group = , DNS name = server-util.xxx.xxx
    2014-08-04 16:24:27:816  840 1438 PT   Server URL =
    http://S-Syd-SCCM.xxx.xxx:80/SimpleAuthWebService/SimpleAuth.asmx
    2014-08-04 16:24:28:925  840 1438 Agent WARNING: Failed to evaluate Installed rule, updateId = {07AEE973-703C-4F27-83F1-3E764D9ED2C7}.202, hr = 80041010
    2014-08-04 16:25:12:270  840 1438 PT +++++++++++  PT: Synchronizing extended update info  +++++++++++
    2014-08-04 16:25:12:270  840 1438 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
    http://S-Syd-SCCM.xxx.xxx:80/ClientWebService/client.asmx
    2014-08-04 16:25:19:083  840 a4c AU Triggering Offline detection (non-interactive)
    2014-08-04 16:25:19:083  840 a4c AU #############
    2014-08-04 16:25:19:083  840 a4c AU ## START ##  AU: Search for updates
    2014-08-04 16:25:19:083  840 a4c AU #########
    2014-08-04 16:25:19:083  840 1438 Agent   * Added update {1E3A5101-3621-458B-B208-5ED11473EFFF}.101 to search result
     16:25:19:083  840 1438 Agent   * Added update {E8A49607-7F8E-47CB-A487-A7465B733A7D}.103 to search result
    2014-08-04 16:25:19:083  840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
    2014-08-04 16:25:19:083  840 1438 Agent   * Added update {CF3B6409-EBE7-462B-89BE-CF0F9754139F}.101 to search result
    2014-08-04 16:25:19:099  840 1438 Agent Bundle contains no deployed children and thus is invalid.
    2014-08-04 16:25:19:099  840 1438 Agent Update {3FEFB63F-4DFC-49C4-85DB-D40DD6EA3F22}.102 is not a valid bundle. Not returning it.
    2014-08-04 16:25:19:114  840 1438 Agent   * Added update {D5F76FFF-AC16-4460-99FE-FB8334F65970}.101 to search result
    2014-08-04 16:25:19:146  840 1438 Agent   * Found 294 updates and 78 categories in search; evaluated appl. rules of 2660 out of 5182 deployed entities
    2014-08-04 16:25:19:739  840 1438 Agent *********
    2014-08-04 16:25:19:739  840 1438 Agent **  END  **  Agent: Finding updates [CallerId = CcmExec]
    2014-08-04 16:25:19:739  840 1438 Agent *************
    2014-08-04 16:25:19:786  840 1438 Agent *************
    2014-08-04 16:25:19:786  840 1438 Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 16:25:19:786  840 1438 Agent *********
    2014-08-04 16:25:19:786  840 1438 Agent   * Online = No; Ignore download priority = No
    2014-08-04 16:25:19:786  840 1438 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
    or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
    2014-08-04 16:25:19:786  840 1438 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-08-04 16:25:19:786  840 1438 Agent   * Search Scope = {Machine}
    2014-08-04 16:25:19:802 2748 13ec COMAPI >>--  RESUMED  -- COMAPI: Search [ClientId = CcmExec]
    2014-08-04 16:25:20:036 2748 13ec COMAPI   - Updates found = 294
    2014-08-04 16:25:20:036 2748 13ec COMAPI ---------
    2014-08-04 16:25:20:036 2748 13ec COMAPI --  END  --  COMAPI: Search [ClientId = CcmExec]
    2014-08-04 16:25:20:036 2748 13ec COMAPI -------------
    2014-08-04 16:25:22:208  840 1438 Agent   * Found 0 updates and 78 categories in search; evaluated appl. rules of 251 out of 5182 deployed entities
    2014-08-04 16:25:22:302  840 1438 Agent *********
    2014-08-04 16:25:22:302  840 1438 Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-08-04 16:25:22:302  840 1438 Agent *************
    2014-08-04 16:25:22:349  840 4bc AU >>##  RESUMED  ## AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
    2014-08-04 16:25:22:349  840 4bc AU   # 0 updates detected
    2014-08-04 16:25:22:349  840 4bc AU #########
    2014-08-04 16:25:22:349  840 4bc AU ##  END  ##  AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
    2014-08-04 16:25:22:349  840 4bc AU #############
    2014-08-04 16:25:22:349  840 4bc AU Featured notifications is disabled.
    2014-08-04 16:25:22:349  840 1438 Report REPORT EVENT: {547C4CB0-3015-402C-A5DF-9B6B1F900864} 2014-08-04 16:25:19:724+1000 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 CcmExec Success Software
    Synchronization Windows Update Client successfully detected 294 updates.
    2014-08-04 16:25:22:349  840 1438 Report REPORT EVENT: {22C743C2-863C-4A90-87E3-C8A81850A45B} 2014-08-04 16:25:19:724+1000 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 CcmExec Success Pre-Deployment
    Check Reporting client status.

  • SCCM 2012 NO SP - Reporting for application deployments not up to date

    Hello, 
    We have a problem when deploying applications with our SCCM 2012 NO SP.
    The reports for the application deployments and sup deployment are not up to date.
    The applications have been deployed on the clients but the information is not in sccm servers. 
    The reporting for the package deployment are working correctly.
    Do you have an idea ?
    Thanks

    Hi,
    How are things going? Please let us know if there is any progress.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sccm 2012 multiple language reports from mbam integration

    I installed mbam on my sccm 2012 primary server and all went well with one exception.  The reports have multiple languages.  In the reports folder that houses the mbam reports, there are multiple folders for the four mbam reports, so I have about
    10 different languages for my 4 reports.  I only want english.  I would think that like any other sccm report I can just delete the others I won't use, but am concerned since this is a component of mbam and it might be expecting those reports
    as "placeholders" for that data.  Can I just delete the folders for the unneeded languages?  Additionally I am getting an error when launching the reports when the window for the report opens it has at the bottom of the report:  ERROR:
    the mbam policy view does not exist.  I am assuming this is because not all the components have been installed in the mbam environment as of yet.  We are upgrading from mbam 1.0 and I am doing the sccm integration piece.  I realize the monitoring
    server needs to be installed, the policy template also needs to go somewhere as well, so  suspect this is expected behaviour with only the sccm integration piece involved so far.  THanks!

    It's more of housekeeping issue.  I am going to have to delete that folder anyway as right now I am connected to a test database and will need to uninstall mbam and reinstall it when they are ready to point to a different database after testing is
    complete.

  • SCCM 2012 Asset Intelligence Report 14A Downgrade Rights not calculated

    Hello,
    In SCCM 2012 the License Reconcilation Report cannot calculate downgrade rights like it was the same problem in SCCM 2007:
    http://social.technet.microsoft.com/Forums/en-US/configmgrai/thread/9c6c74cb-9bdc-4a7b-92af-feca7397a5fb
    I tried this solution but the view V_CAL_User isn't existing anymore in 2012 so i cannot execute this query:
    http://myitforum.com/cs2/blogs/idany/archive/2008/10/16/improving-microsoft-volume-licensing-reconciliation-report.aspx
    So can you help me experts?
    Thanks

    Yes I know this is an old post, Cal tracking has been removed from CM12 AI and no longer exists.
    Also within the forum post you will notice that I say there is no downgrade right listed within CM12/CM07 AI. If you feel this is important then I suggest that you submit a connect item. Post the link back here for other to vote up.
    http://www.enhansoft.com/

  • SCCM 2012 SQL Server Report Builder Error

    I am trying to create a report with SQL query on SCCM 2012. I get the below error.
    TITLE: Microsoft SQL Server Report Builder
    An error occurred while executing the query.
    The SELECT permission was denied on the object 'v_GS_OPERATING_SYSTEM', database 'CM_C01', schema 'dbo'.
    ADDITIONAL INFORMATION:
    The SELECT permission was denied on the object 'v_GS_OPERATING_SYSTEM', database 'CM_C01', schema 'dbo'. (Microsoft SQL Server, Error: 229)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=229&LinkId=20476
    BUTTONS:
    OK

    Does your account have accesses within SQL? Bases on the error message I'm guessing not.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 SP1 agent install via WSUS

    Hi guys,
    I'm having got an issue when I try installing the agent via WSUS. When I try installing manually everything seems to work.
    Here are the infos from the ccmsetup.log:
    ==========[ ccmsetup started in process 2252 ]========== ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Running on platform X86 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Updated security on object C:\WINDOWS\ccmsetup\cache\. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Launch from folder C:\WINDOWS\SoftwareDistribution\Download\Install\ ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    CcmSetup version: 5.0.7804.1000 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Running on OS (6.1.7601). Service Pack (1.0). SuiteMask = 256. Product Type = 1 ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Ccmsetup command line: "C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe"  ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSJoinedToADDomain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Local Machine is joined to an AD domain ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetAssignedSiteFromAD ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    DhcpGetOriginalSubnetMask entry point is supported. ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Begin checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    spNamespace.Open(sNamespacePath), HRESULT=8004100e (e:\nts_sccm_release\sms\framework\ccmutillib\ccmiputil.cpp,1109) ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Finished checking Alternate Network Configuration ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    LSGetADSiteName ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Current AD site of machine is DE-Zeilarn ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Attempting to query AD for assigned site code ccmsetup 08.02.2013 13:45:46 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=MSSMSRoamingBoundaryRange)(|(&(MSSMSRangedIPLow<=2887256160)(MSSMSRangedIPHigh>=2887256160))))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSSite)(|(mSSMSRoamingBoundaries=172.24.8.0)(mSSMSRoamingBoundaries=DE-Zeilarn)(mSSMSSiteCode=XYZ)))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Verifying Site Compatibility for <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD : Attempting to query AD for MPs for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetSiteVersionFromAD : Successfully retrieved version '5.00.7804.1000' for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Site Version = '5.00.7804.1000' Site Capabilities = <Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities> ccmsetup 08.02.2013
    13:45:47 196 (0x00C4)
    LSIsSiteVersionCompatible : Site Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSIsSiteCompatible : Site <XYZ> Version '5.00.7804.1000' is compatible. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetAssignedSiteFromAD : Trying to Assign to the Site <XYZ> ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Got site code 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=XYZ))' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    OperationalXml '<ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    HTTP is selected for Client. The current state is 0. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    The MP name retrieved is 'mysccmserver.mydomain.tld' with version '7804' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSL" Version="1"/><Property Name="SSLState" Value="31"/></Capabilities>' ccmsetup 08.02.2013
    13:45:47 196 (0x00C4)
    MP 'mysccmserver.mydomain.tld' is not compatible ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieved 0 MP records from AD for site 'XYZ' ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Certificate Issuers =  ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    SslState value: 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Ccmsetup was run without any user parameters specified. Running without registering ccmsetup as a service. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Detected sitecode 'XYZ' from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPPORT:    80 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSPORT:    443 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSSTATE:    480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMHTTPSCERTNAME:     ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FSP:     ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMCERTISSUERS:    CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMFIRSTCERT:    1 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Creating CCMCertStore ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMCERTID:    SMS;FB0F35392A7FF68D2FA9C97D0CD54A3E0057964E ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    No MP or source location has been explicitly specified.  Trying to discover a valid content location... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Looking for MPs from AD... ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Retrieving client operational settings from AD. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Received client operational settings: <ClientOperationalSettings><Version>5.00.7804.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=root-ca</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>XYZ</RootSiteCode><CCM>
    <CommandLine>SMSSITECODE=XYZ</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSL" Version="1" /><Property Name="SSLState"
    Value="31" /></Capabilities><Domain Value="mydomain.tld" /><Forest Value="mydomain.tld" /></ClientOperationalSettings>. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Http port 80; https port 443; select first cert 1; sslstate 480 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Security settings: Certificate Issuers = CN=root-ca ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    FromAD: command line = SMSSITECODE=XYZ ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetManagementPointsForSiteFromAD ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CCMGetGlobalService(&spService), HRESULT=87d00219 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmconditions.cpp,39) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    LSGetADForestAndDomainName ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current AD forest name is mydomain.tld, domain name is mydomain.tld ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Domain joined client is in Intranet ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CMPInfoFromADCache requests are throttled for 00:59:59 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Current directory 'C:\WINDOWS\SoftwareDistribution\Download\Install' is not a valid source location. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    DetermineInstallSource(), HRESULT=80004005 (e:\nts_sccm_release\sms\setup\ccmsetup\ccmsetup.cpp,4426) ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    Failed to parse '"C:\WINDOWS\SoftwareDistribution\Download\Install\ccmsetup.exe" ' with error 0x80004005 ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    A Fallback Status Point has not been specified.  Message with STATEID='307' will not be sent. ccmsetup 08.02.2013 13:45:47 196 (0x00C4)
    CFSPStateMessage::~CFSPStateMessage FSPStateMessage 08.02.2013 13:45:47 196 (0x00C4)
    ParseCommandLine(), HRESULT=80004005
    My boundaries and boundary groups are configured, I can see the objects in the Systems Management Container in AD, but still the agent install via WSUS will not work. Any suggestions?
    Cheers
    Sebastian Bammer

    see my latest post. It looks like a bug in the setup. It selects a certificate but still it presents information that iis on the mp does not accept. Check your iis logs. Manual install works for ssl only sites. I haven't got any other methods yet. I will
    keep you updated.

  • SCCM 2012 R2 - Bitlocker PIN not Suspending when performing patching

    Hello,
    After upgrading to R2 version of SCCM, when applying
    patching to our client machines, even with the "Suspend Bitlocker PIN
    entry on restart" "Always" on, Bitlocker is not suspending.
    This worked perfectly in SCCM RTM and SP1 versions.
    Is there any configuration or patch to solve this issue?
    Regards,
    Eduardo Sousa

    Take a look at rebootCordinator.log. The reboot must be triggered by SCCM client and the policy must already be applied to Client.
    Juke Chou
    TechNet Community Support

  • SCCM 2012 - Endpoint Protection Reporting only using static end date

    I have created a subscription to the Endpoint Protection/Antimalware Activity Report built into SCCM2012/Endpoint Protection.
    My problem is that I am having trouble getting the dates to work correctly.  I want to have the report automaticlly emailed out every monday morning with the status from the last 7 days (i.e. since the last monday report). 
    However the subscription seems to want a static end date.  That is, every monday when the report runs it gives me a status report from the exact same 7 days.  Not the most recent 7 days. 
    How do I go about changing this so it is useful and that every monday it runs, the report it creates/sends is from the the last 7 days?

    I hope this helps (I am still testing it) but I did this by:-
    "Editing" the default report such as "Antimalware activity report".
    To avoid corrupting this default report before you change anything select SaveAs and call it something like "Antimalware activity report
    for the last 7 days".
    Open Datasets, StartEndDates and replace the query with this for the last 7 days
    "select DATEADD(day,datediff(day,0,GetDate())- 7,0) as StartDate, DATEADD(day,datediff(day,0,GetDate()),0) as EndDate"
    Then open Parameters, StartDate and under General change it to "Hidden".
    Then open Parameters, EndDate and under General change it to "Hidden".
    Save and test
    I had to set the "default value" on each parameter, per Lillonel:
    StartDate : =DateAdd("d",-7,Globals!ExecutionTime)
    EndDate : =Globals!ExecutionTime
    It looks like it is using a 7 day window now.

  • SCCM 2012 All Updates report sql query

    Need build sql query for report about all MS Updates like SCCM configuration manager view in window by path:
    \Software Library\Overview\Software Updates\All Software Updates.
    But I can't find fields that can show "product" (OS that use this patch) and size of each patch in SCCM and WSUS databases. Can anybody help me?

    To get file size I create query for files in package:
    SELECT distinct ui.Title, ui.InfoURL, ui.DatePosted,
    cf.FileName, cast(cast(cf.FileSize as real)/1024/1024 as decimal(10,2)) as SizeMb, uds.AssignmentName, uds.StartTime
    FROM CI_ContentFiles cf
    INNER JOIN v_UpdateContents uc  ON cf.Content_ID  = uc.Content_ID
    INNER JOIN v_UpdateInfo ui ON uc.CI_ID = ui.CI_ID 
    INNER JOIN vSMS_UpdateDeploymentSummary uds  ON ui.CI_ID = uds.CI_ID
    join CI_ContentPackages cp on cf.Content_ID=cp.Content_ID
    join CI_Contents co on co.Content_ID = cp.Content_ID
    Where PkgID='MKL00032'
    order by ui.InfoURL

  • Enforcement State Unknown issue in SCCM 2012 Patch management report.

    Software updates are installed on machine. All updates shown in updates history, but machine not reporting back as Complaint. It showing in Enforcement State Unknown. Please help to resolve the issue.

    Hi,
    Have you tried to "Run Summarization" while right click the software update group?
    If it still shows unknown, please check StateMessage.log on a client that updates show unknown to see whether the state messages have been forwarded successfully.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 - Patch Deployment Report

    Hello,
    I'm trying to figure out a way to find out the last patch installed date on servers. Could you please let me know if this is possible using the SQL query ?
    Many Thanks,
    Raj

    We are asked by the compliance team to show when the server was last patched.. that is the reaon behind this question. I can get the SCCM report with the Month and Year, but unfortunately that does not list the server names.
    Ok, but that does not guarantee that the server is up-to-date. What is their end goal? Shouldn’t they care what SU are missing form each server not when the last SU was applied?
    http://www.enhansoft.com/

  • SCCM 2012 update compalince report -need to add Reboot pending machines

    hi
    I have an Sql Query for update compliance ,which looks for particular software update group and collection   ,need to add rebooting pending machine count in this list
    select
    count
    (*) [Total Clients],
    li.title,coll.name,
    SUM
    (CASE
    WHEN ucs.status=3
    or ucs.status=1 
    then 1
    ELSE 0
    END
    as
    'Installed / Not Applicable',
    sum
    case
    When ucs.status=2
    Then 1
    ELSE 0
    END
    as
    'Required',
    sum
    case
    When ucs.status=0
    Then 1
    ELSE 0
    END
    as
    'Unknown',
    round
    ((CAST(SUM(CASE
    WHEN ucs.status=3
    or ucs.status=1
    THEN 1
    ELSE 0
    END)
    as
    float)/count(*)
    )*100,2)
    as
    'Success %',
    round((CAST(count(case
    when ucs.status
    not
    in('3','1')
    THEN
    end)
    as
    float)/count(*))*100,2)
    as
    'Not Success%'
    From v_Update_ComplianceStatusAll UCS
    inner
    join v_r_system
    sys
    on ucs.resourceid=sys.resourceid
    inner
    join v_FullCollectionMembership fcm
    on ucs.resourceid=fcm.resourceid
    inner
    join v_collection coll
    on coll.collectionid=fcm.collectionid
    inner
    join v_AuthListInfo LI
    on ucs.ci_id=li.ci_id
    where
    li.title='SUG_Windows_
    Workstations' and coll.name='Update_complaince_workstation'
    --and ucs.status=2
    group
    by li.title,coll.name
    order
    by 1
    ankith

    What are you trying to achieve? Isn't it something similar to the default report
    Compliance 3 - Update group (per update)?
    A nice method to find reboot pending machines is described here:
    http://blogs.technet.com/b/smartinez/archive/2014/06/27/reboot-pending-report-how-to-create-the-report.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for

  • Hard drive not recognized on startup after 10.4.6 update

    This is hurting my brain. I updated to 10.4.6 from the Software Update that popped up today. Upon restart it "froze" on the greyscreen with the Apple logo. (didn't make it to the spinning wheel). I even let it sit for a good 10 minutes, hoping it wou

  • How can I create a jpeg thumbnail image?

    I'd like to create a clear jpeg thumbnail image of the first page of a document created in InDesign.  It will be used in Constant Contact as a link to the online version of the document.  (Constant Contact doesn't take JPEG's) I especially need help

  • ORA-12008: error in materialized view refresh path

    Hi everyone, I'm getting a weird error when I try to do a fast refresh on my materialized view. My basic approach is simple, I got a MV log on my fact table with all the columns needed by the materialized view, sequence, rowid INCLUDING NEW VALUES. I

  • How to convert "any" date format to internal format

    Hi, I want to convert any date format  to internal format. Is there any function module ? The date formats could be: DD.MM.YYYY MM/DD/YYYY MM-DD-YYYY YYYY.MM.DD YYYY/MM/DD YYYY-MM-DD Thank you, Surya

  • Interface SAP - External System

    hi expert i need make a interface beetween sap and a visual basic program... my idea is use a rfc, but i think i need use a connector, can i do this without a extra connector ...my client don´t want buy a licence thxz......