SCCM 2012 R2 Stand Alone Primary

Hello,
Our current environment has 2 stand alone primary, is adding a CAS and joining the 2 primary something feasible and supported?
Thanks

Hello,
Our current environment has 2 stand alone primary, is adding a CAS and joining the 2 primary something feasible and supported?
Thanks
Well just found out the answer
Beginning with System Center 2012 Configuration Manager SP1, you can install a new central administration site as a parent site of an existing stand-alone primary site. This expands your stand-alone primary site into a larger hierarchy that
supports the install of additional new primary sites. You can expand only one pre-existing primary site into the new hierarchy because the database of the new central administration site is based on the database of your stand-alone primary site. After this
new central administration site installs, you cannot join or expand additional pre-existing primary sites to this same hierarchy. However, you can install new primary sites as child sites below the central administration site.

Similar Messages

  • Install "use typical installation options for a stand-alone primary site" All SQL Prerequisites Failed. Checks SQL before SQL is even installed?

    So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server.
    But then during the prerequisite checks it fails every SQL check.
    Is it just me or a giant catch 22? Am I missing something here? How is this over looked if it is what it looks like? Why even have this simple install option if it can't work?

    Take a look at my R2 install guide. This is for a stand alone primary. As Torsten states you pretty much need SQL installed and configured correctly prior to running the ConfigMgr install - along with  a few other pre-reqs.
    https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
    Cheers
    Paul | sccmentor.wordpress.com

  • Expand a Stand-Alone Primary Site into a Hierarchy with a Central Administration Site

    I have a stand alone SCCM server in my Lab. Now I need to install a CAS and add the stand alone SCCM site to the hierarchy.
    As I have searched on Google the steps are quite simpler I have followed the below link for doing the same.
    http://technet.microsoft.com/en-us/library/jj591551.aspx
    http://www.scconfigmgr.com/2013/05/03/install-a-configmgr-2012-sp1-central-administration-site/
    But when i click on install, the installation failed at this particular step:-
    In the log file below is the error I received:-
    I am only using a single Domain account throughout the environment and SQL and SCCM has been installed with the very same account. 
    Stand alone site has been installed on the default SQL instance and I have created a named instance "CAS" for CAS installation on the very same SQL Server. The domain account has sufficient rights on the SQL and the Machine accounts have the local
    admin privileges both for CAS and stand alone and also on SQL.
    Gaurav Ranjan

    Hi,
    Have you disabled the firewall?
    You could create a UDL file to test connectivity between machines (See
    http://msdn.microsoft.com/en-us/library/e38h511e(v=VS.71).aspx for more information)
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

    I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
    The error I get in ccmsetup.log is:
    <![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
    <![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
    <![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
    Action: CcmRegisterHostingConfiguration.
    ErrorMessages:
    Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    ]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
    <![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
    <![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
    <![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
    <![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
    I have this on my primary and secondary servers as well.
    Is upgrading to R2 recommended and will that solve this issue ?
    When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
    But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

    Try the following steps to specify the hotfix when installing the client.
    1. Open an elevated command prompt.
    2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
    \\servername\SMS_SITE\Client\hotfix folder:
    \ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp 
    Juke Chou
    TechNet Community Support

  • Expand a Stand-Alone Primary Site into a Hierarchy with CAS using the same server?

    Currently i have a single server lab deployment of SCCM 2012 R2 which has all the CM roles and SQL server also installed on it.  I want to expand the standalone primary site configuration into central administration site but i'm not sure if i can do
    it on the same site system server or if i must get a second server up to do it?
    I read through http://technet.microsoft.com/en-us/library/jj591551.aspx and all the leading articles but i don't really seem to find this information anywhere.
    thanks.

    CAS and Primary Site cannot be installed on the same server.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Stand-alone primary site - Intranet, Internet and Workgroup Clients

    Hi,
    I am using SCCM 2012 R2 over Windows 2012 R2. Clients are Win7 to Win8.1.
    Clients location: domain joined (intranet and Internet) and workgroup (intranet)
    1 SCCM server (All-in-one).
    1 domain.
    I am using the following article for certificates http://technet.microsoft.com/en-us/library/gg682023.aspx
    The PKI certificates was generated at a Win 2008 CA.
    The IIS is configured to use a web server certificate.
    The management point configuration screenshot is:
    The distribution point screenshot is:
    (end of part one)

    (part two)
    The site system screenshot is:
    A workgroup client (located at intranet) was installed the client certificate and installed the SCCM client manually (http://technet.microsoft.com/en-us/library/2ad4b21a-43bd-434e-b3bb-fc8744da7e9c#BKMK_ClientWorkgroup). But there is not communication between
    the client and SCCM server. LocationServices.log:
    Retrieved MP [SCCM-VM.PUCE.EDU.EC] from Registry    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Attempting to retrieve lookup MP(s) from DNS    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    DNS Suffix not specified    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    No lookup MP(s) from DNS    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Policy prevents failover to WINS for lookup    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Attempting to retrieve default management points from lookup MP(s) via HTTPS    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Failed to send request to /ccm_system_AltAuth/request at host sccm-vm.mydomain.local, error 0x2f8f    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    [CCMHTTP] ERROR: URL=https://sccm-vm.mydomain.local/ccm_system_AltAuth/request, Port=443, Options=224, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Successfully sent location services HTTPS failure message.    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Error sending HEAD request. HTTP code 600, status ''    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Failed to send request to /ccm_system_AltAuth/request at host sccm-vm.mydomain.local, error 0x2f8f    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    [CCMHTTP] ERROR: URL=https://sccm-vm.mydomain.local/ccm_system_AltAuth/request, Port=443, Options=224, Code=12175, Text=ERROR_WINHTTP_SECURE_FAILURE    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Successfully sent location services HTTPS failure message.    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    Error sending HEAD request. HTTP code 600, status ''    LocationServices    4/24/2014 10:53:54 AM    5368 (0x14F8)
    After, I configure the site:
    then, the workgroup client was OK communicating with SCCM server.
    But, the client cannot be installed at domain joined PCs, with the error: "Source \\sccm-vm\SMSClient is inaccessible (67)", at the SCCM server the SMSClient share does not exist.
    The questions are:
    Is it possible manage domain joined, workgroup and Internet PCs using only one SCCM server?
    a second server must be installed(MP/DP)?
    if only one server can manage all of the PCs, what is the correct configuration for SCCM?
    Thanks in advance!

  • Replacing the primary site server, SCCM 2012 R2

    Hi,
    Setup is currently SCCM 2012 R2 with the primary site server on Windows 2008 R2 on a Hyper-V VM with a separate physical SQL server on 2008 R2 (Windows and SQL). I'm not making any changes to the SQL server at this stage.
    I want to completely replace the primary site server VM completely with a brand new VM using Windows 2012 R2.
    I was looking to run the SCCM setup and using the Expand an existing stand-alone primary into a hierarchy option but it wont let me do that due to "The site code you specified should not be the same as the primary site's site code".
    So seems this Expand an existing option isn't the right option for me?
    Do I just add the new server in the SCCM console and add all roles and test and then delete the roles from the old server?
    Thanks
    EDIT: I have 7 Secondary sites, so I dont want to just start over by doing some sort of backup and restore to the new server unless someone can tell me that wont break my hierarchy. 

    a backup and recovery is the correct way to do this, but there are a few things you should keep in mind.
    Do a backup of your current environment and shut everything down.
    install new vm, ensure the configuration is identical, (dns, hostname, etc...); install the same software and pre-requisites,
    do a recovery
    check the following links on how to do a backup and restore:
    http://www.windows-noob.com/forums/index.php?/topic/7403-how-can-i-backup-system-center-2012-configuration-manager/
    and
    http://technet.microsoft.com/en-us/library/gg712697.aspx

  • SCCM 2012 Primary Site server is piling up so huge

    Hello Folks,
    We recently implemented SCCM in our environment for a month ago. Its a stand-alone primary site model running DB on the primary site server itself. But, have segregated the drives for content, DB, and C drive for holding up the SCCM server related
    installations. I haven't noticed the data growth on the server, as a result the C drive ran out of space yesterday and increased 40 GB more than the earlier. As of now, C drive has about 120 gb in total and there is only 25% left on whereas it had 33%
    after expanding to 120 GB. When digging through the blogs, I doubted it could be BAD MIF inbox folder(screenshot attached), so went ahead and ran space check on the server, and looks like the major % of drive space is being occupied by the inbox folder and
    also it is increasing day by day. I need further more directions on how this can be monitored to find out growth % and fix this.
    I checked basic stuffs like clearing up profile & recycle bin data and any of this kind.
    Step by step guide in detail should be more helpful in this regard. And, I hope this should be helpful for a larger SCCM admin crowd like me in the universe.
    I also want to know what are the settings in SCCM console associates with these folders so that the settings can be streamlined to match the best practices (like inventory schedule for every 1 week & software inventory best practices) if at all, if we
    have enabled in the implementation phase to receive fast & large results.
    Thanks, V@s!m

    We are seeing a stable disk size nowadays.
    With that hopefully, this is a time to sum up the actions taken.
    1. SCCM 2012 implemented a couple of months ago.
    2. During the implementation phase, Client & Discovery settings were enabled to be quite an aggressive schedules to get good amount of results in a short period.
    3. Implementation had been successfully completed and the system was running just fine until I noticed the space crunch
    4. I thought it was normal and increased the disk space by 50% which got ate up in a couple of days and that's when I started suspecting about something is going wrong
    5. As an interim solution, have increased the disk space by 70% and started troubleshooting the SCCM buddy.
    6. Discovery settings were brought down to not to be aggressive (but this wasn't the issue) - still the issue was going on
    7. Inventory settings were too brought down to be nominal (Useful :
    http://www.informit.com/articles/article.aspx?p=1912064&seqNum=8)
    8. By this time, I brought my colleague who was involved during the Implementation. We did the clean-up on server, went through the Inbox\Auth folders and were trying to figure out still what is going wrong.
    9. We couldn't notice much improvement about the situation though we gave enough time for each and every fix that we applied.
    10. Through some warnings and errors in the site system status, remembered that the 'Configuration.mof' was modified for testing some customized inventory classes, during the implementation phase which was getting mismatched data from lot of different clients.
    - "Potential cause figured out"
    11. Replaced the original Configuration.mof, and we started noticing big differences - the space was no more increasing.
    12. Still we could see lot of old files in sub-folders of Inbox\Auth folder, we hope all these files would try to process for the information that we added in the 'Configuration.mof' > will fail > will go to respective 'Bad/Corrupt' folders and
    eventually will be removed as per the clean-up cycle.
    I will update the thread if anything goes wrong beyond this point. But, we believe it wouldn't as we have found the culprit and fixed.
    **** I appreciate all your responses to help me with this situation. Happy SCCMing..!
    Thanks, V@s!m

  • ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

    Hi,
    We try to install sccm 2012 serondary site in server 2012. It always failed.
    I used the rereqchek tools to check system enviroment locally. All passed.
    The primary site installed in server 2012.  Both server had granted the administrator permission.
    Anyone can help to check the below Configmgrprereq.log
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> Commandline :
    "D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    <01-16-2015 08:47:55> Check Type: Secondary site
     Site Server: DPServer.ms.com,
     SQL Server: DPServer.ms.com,
     SQL Named Instance: ,
     Install Folder: d:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: D:\SCCM2012\Source
    <01-16-2015 08:47:55> INFO: Executing prerequisite functions...
    <01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
    <01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
    the SQL Server and management point computers.
    <01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
    <01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
    <01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
    2008 SP2 or later.
    <01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
    <01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
    <01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
    <01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
    <01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
    <01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
    <01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
    <01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
    <01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
    <01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
    server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
    Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
    <01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
    <01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
    <01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
    <01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
    requirement.  Configuration Manager requires at least Windows Installer version 4.5.
    <01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
    <01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
    <01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
    <01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
    <01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
    <01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
    <01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
    or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
    <01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
    <01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
    site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
    <01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    <01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
    <01-16-2015 08:49:55> INFO: SQL Server named instance <>
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
    <01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
    <01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
    <01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
    <01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
    <01-16-2015 08:50:05> INFO: .NET is installed
    <01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    <01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
    <01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
    <01-16-2015 08:50:10> INFO: .NET is installed
    <01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    <01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
    <01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
    <01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
    <01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
    <01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
    recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
    <01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
    <01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
    <01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
    <01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
    <01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
    <01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
    <01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
    <01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
    for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
    permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
    <01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
    <01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
    <01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
    <01-16-2015 08:53:44> INFO: LangID <409>
    <01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
    <01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
    <01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
    <01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
    <01-16-2015 08:53:44> INFO: getaddrinfo returned success.
    <01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
    <01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
    <01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
    Server 2008 SP2 or later.
    <01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
    <01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
    <01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
    requires IIS. Install IIS on the site system to continue setup.
    <01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
    is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
    not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
    <01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    <01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
    <01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
    <01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
    <01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
    client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
    <01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
    <01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
    Windows Server 2003 or later.
    <01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
    Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
    <01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
    <01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
    <01-16-2015 08:56:09> INFO: Setting registry values
    <01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
    on the SQL Server and management point computers.
    Actually the administrative permission had been granted.

  • Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server

    Dear Brother,
    My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
    One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
    1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
    Actions Done: None
    2.[Failed]:The collation of the site database does not match the collation of the parent site's database.  All sites in a hierarchy must use the same database collation.
    3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
    manually verified these permissions. For more information about your options to configure required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
    4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Action Taken:  Domain Account "Microsoft-Domain\BillAdmin" has a
    Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles" 
    5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
    in the root of the primary site server system drive.
    6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
    ConfigMgrPrereq.log-Start
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> Commandline :
    "E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    ?<12-27-2014 23:39:35> Check Type: Secondary site
     Site Server: SecondarySite2.microsoft.com,
     SQL Server: SecondarySite2.microsoft.com,
     SQL Named Instance: MSSQLSERVER,
     Install Folder: E:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: E:\Source\SCCM2012-R2
    ?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
    ?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:43> SecondarySite2.microsoft.com;    Site server computer account administrative rights;    Passed
    ?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:44> SecondarySite2.microsoft.com;    Check Server Service is running;    Passed
    ?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Unsupported site server operating system version for Setup;    Passed
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Domain membership;    Passed
    ?<12-27-2014 23:39:47> INFO: Free disk space on target
    \\SecondarySite2.microsoft.com\E$\. = 83157 MB
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Free disk space on site server;    Passed
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Pending system restart;    Passed
    ?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Read-Only Domain Controller;    Passed
    ?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Site Server FQDN Length;    Passed
    ?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60);    Passed
    ?<12-27-2014 23:39:49> SecondarySite2.microsoft.com;    Microsoft Remote Differential Compression (RDC) library registered;    Passed
    ?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
    ?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    Microsoft Windows Installer;    Passed
    ?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
    ?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    SQL Server Express on Secondary Site;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Existing Configuration Manager server components on site server;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    ?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    SQL Server service running account;    Error;    The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
    name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    ?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    Dedicated SQL Server instance;    Passed
    ?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
    ?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
    ?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;    Parent/child database collation;    Error;    The collation of the site database does not match the collation of the parent site's database.  All
    sites in a hierarchy must use the same database collation.
    ?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
    ?<12-27-2014 23:41:28> INFO: .NET is installed
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    ?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    ?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
    ?<12-27-2014 23:41:29> SecondarySite2.microsoft.com;    Setup Source Version;    Passed
    ?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    Setup Source Folder;    Passed
    ?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
    ?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    SQL Server on the Secondary Site Computer;    Passed
    ?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
    ?<12-27-2014 23:42:15> SecondarySite2.microsoft.com;    Primary FQDN;    Passed
    ?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> SecondarySite2.microsoft.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer
    account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
    required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    ?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Remote Connection to WMI on Secondary Site;    Passed
    ?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
    ?<12-27-2014 23:42:48> INFO: LangID <409>
    ?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Required SQL Server Collation;    Passed
    ?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    SQL Server sysadmin rights;    Error;    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
    on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
    ?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Administrative share (Site system);    Passed
    ?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Site System to SQL Server Communication;    Passed
    ?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:44:35> SecondarySite2.microsoft.com;    Unsupported management point operating system version for Setup;    Passed
    ?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    Windows Failover Cluster;    Passed
    ?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    IIS service running;    Passed
    ?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:45:35> SecondarySite2.microsoft.com;    BITS installed;    Passed
    ?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    BITS enabled;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for management point;    Passed
    ?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Firewall exception for SQL Server for management point;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Administrative rights on management point;    Passed
    ?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:47:45> SecondarySite2.microsoft.com;    Client Version on Management Point Computer;    Passed
    ?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Unsupported distribution point operating system version for Setup;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for distribution point;    Passed
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Administrative rights on distribution point;    Passed
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
    ?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
    ?<12-27-2014 23:47:50> INFO: Setting registry values
    ConfigMgrPrereq.log-End
    Well my question is what would be the best solutions as it bugs me for days now.
    Regards,

    Hello,
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;   
    SQL Server sysadmin rights;    Error;   
    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Did you install SQL server with a local account?
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;   
    Parent/child database collation;    Error;   
    The collation of the site database does not match the collation of the parent site's database. 
    All sites in a hierarchy must use the same database collation.
    Try this blog:
    http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCCM 2012 R2 Clients are not retrieving policy

    Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
    Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
    (HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
    A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
    However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
    result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
    I have checked and rechecked the following:
    The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
    The MP health in the SCCM console is showing healthy.
    The MP access URL's load correctly when run from SCCm client computers
    “http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
    “http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
    The SCCM clients are assigned to the site correctly – verified via the SCCM client and
    ClientLocation.Log
    ClientIDManager.Log is not showing any errors
    CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
    registered this is expected behaviour")
    The SCCM clients are Approved and NOT Blocked in SCCM
    I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
    I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
    SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
    The SCCM client’s do not have the firewall enabled
    Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
    Uninstalled MP role and reinstalled it: same Issue exists
    Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
    ??? Not sure what else to try ???

    Hi all - sorry for the late response.
    We managed to resolve the issue after logging a job with Microsoft Support.
    The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
    I am pasting the resolution email from Microsoft below:
    (NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
    ISSUE: 
    - All clients are unable to download policies from the server
    CAUSE:
    - Bad policies in the Database
    RESOLUTION: 
    -Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
    SELECT * FROM
    ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
    Confirmed Bad policies entries in the SCCM database
    Run below query to delete the bad policy after which we resolved the issue:
    Delete FROM ResPolicyMap
    WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

  • Client manageability in SCCM 2012

    Hi All
    I am Planning to have test SCCM 2012 environment and for that i need few architecture suggestions. Kindly suggest me on the same so that i can implement an effective infrastructure design.
    Total Number of Clients to Support - 58000
    First Draft version of design consist of 1 Primary Site and 3 Seconadry Sites. Kindly confirm if 1 primary and 3 secondary site will be able to cater 58000 clients. As per my understanding secondary site supports 5000 clients and Primary sites can support
    25000 Clients.
    Also confirm that clients under secondary site will be considered as client of primary site (linit of 25000) or seperately counted (25k +5K).
    Regards
    Regards Suresh

    Kent's book talks about a limitation of 50 000 when using a local SQL server. 
    Kent's book does state this. 
    Note that the Technet article states the following (from the link supplied by John):
    Client group 1 includes Windows Server and client.
    Site type
    Configuration Manager version
    Client group 1
    Client group 2
    Client group 3
    Stand-alone primary site, with a local site database, or a remote site database
    System Center 2012 Configuration Manager with no service pack 1
    100,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    100,000 2
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    100,000 2
    50,000 4
    25,000
    Child primary site with a local site database
    System Center 2012 Configuration Manager with no service pack 1
    50,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    50,000 2
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    50,000 2
    50,000 4
    25,000
    Child primary site with a remote site database
    System Center 2012 Configuration Manager with no service pack 1
    100,000
    50,000 4
    25,000
    System Center 2012 Configuration Manager with SP1
    100,000 2, 3
    50,000 4
    25,000
    System Center 2012 R2 Configuration Manager
    100,000 2, 3
    50,000 4
    25,000
    Secondary site
    Any version 1
    5,000 5
    Cheers
    Paul | sccmentor.wordpress.com

  • SCCM 2012 - Question before deployment (WSUS/SCUP and other feature).

    Hello,
    Sorry for the question but I'm a newbie about Microsoft SCCM architecture...
    I have to deploy a new WSUS (4.0) server for my new servers (Windows 2012) and I ask myself how I can install him correctly with idea of a futur SSCM system.
    About WSUS, this  server is only for the new servers (Windows 2012) which can not receive update by our current WSUS server (Windows 2003 WSUS 3.0 SP1). I think I need also upgrade my AD schema to the 2012 level before ?
    And from what I understood of SSCM especially for software management (deploy and updates), there is a specific role "Software Update Point" which uses WSUS for Microsoft Product and SCUP for the third party tools.
    I am wondering which server configuration is the best for my future SSCM architecture.
    Firstly, can I setup my WSUS to a new server and add the role "SSCM - Software Update Point" on the same server later ? If it's possible, what type of server is recommended ? 
    Just for the WSUS feature I had expected a VM with a dual core CPU, 4GB RAM, 40GB for the system and 100GB only for the update data (a total of 250 servers and clients which can use 2003,2008,2012,XP,7,Office2010,Exchange 2010).
    Regarding SSCM in general, Is it recommended to have multiple server for SSCM for a total of 100 servers and 150 clients ? If yes can we separate them by role ? 
    I think I will have another questions later but it's a good start.
    Thanks in advance for your good advice !
    Have a nice day,
    Clement

    Hi,
    Thanks for your advice, I have many questions because I did not want setup an SSCM now but it seems it's the better solution (my first need is to deploy MS update on my new servers).
    If I install my WSUS service on my server I could not reuse it directly for my SSCM (because I must start with a fresh installation of WSUS?).
    Regarding the hardware,  I thinks that minimum requirements isn't a good idee (see bellow).
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_MinHWReqs that 
    Hardware component
    Requirement
    Processor
    Minimum: AMD Opteron, AMD Athlon 64, Intel Xeon with Intel EM64T support, Intel Pentium IV with EM64T support
    Minimum: 1.4 GHz
    RAM
    Minimum: 2 GB
    Free disk space
    Available: 10 GB
    Total: 50 GB
    Do you believe that an dual core with 4GB is correct ? 
    And for the disk at least 100GB just for the WSUS and 200GB for the storage of system image and package deployment (third party tools) ?
    Edit : value is totaly different here :
    http://technet.microsoft.com/en-us/library/hh846235
    Stand-alone primary site
    Up to 100,000 clients
    SQL Server is installed on the site server computer
    8 cores (Intel Xeon E5504 or comparable CPU)
    32 GB of RAM
    550 GB hard disk space for the operating system, SQL Server, and all database files
    I thinks if we deploy an SSCM, we will use it for the deployment of system (clients), applications (Office, third party tools), updates (MS and third party tools) but also for the managing of our infrastructure (SSCM seems very powerfull).
    Regards,
    Clément

  • SCCM 2012: import objects from AD/manually

    Hi,
    We have an SCCM 2007 environment in which we want to update the sccm clients to SCCM 2012, then managing within new SCCM 2012 environment/installing a new OS to it. AD discovery happens and also an import of pc’s was done (mac).
    We have duplicate entries: one with automatic discovered objects of AD, one with manually imported items.
    Both should merge to 1 object. Just to see if we're doing this right. If we deploy a task sequence, we should deploy it to the manually imported object, since that one contains the mac-address, right?
    J.
    Jan Hoedt

    You can try to change the setting on "CAS" (if you've one) or "stand alone Primary" level from “Automatically resolve conflicting records” to “Manually resolve conflicting records” and implement a Status Filter Rule, that automatically
    merges duplicate records.
    There are scripts around to fix the conflict issue. 
    I don't know whether you wanted to fix the duplicate record issue or you're more concerned about finding the correct/working object. When you've a duplicate objects then I don't think it would be very easy get things worked. 
    Anoop C Nair -
    @anoopmannur :: MY Site:
     www.AnoopCNair.com ::
    FaceBook:
     ConfigMgr(SCCM) Page ::
    Linkedin:
     Linkedin<

  • SCCM 2012 R2 with CAS

    Hi
    I have SCCM 2012 R2 CU4 (on Windows 2012 R2) with SQL 2012 (on Windows 2012 R2).
    we decided to install a CAS,
    there he has a procedure that
    allows you to attach an existing SCCM
    2012 R2 CAS?
    Thanks

    Assuming you've got a good reason to install a CAS, here is the procedure to expand a stand-alone primary site with a CAS:
    https://technet.microsoft.com/en-us/library/jj591551.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for