SCCM 2012 SP1 Primary to CAS

Hello All and Thanks for your continued assistance.
I'm curious to hear from those that have expanded their primary to a CAS scenario. We need more than one primary in our environment and considering the move to a CAS.
Read through this already: http://technet.microsoft.com/en-us/library/gg712681.aspx
Any thoughts you would like to share. 

Do you have more than 100,000 computers? If not don't do it.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site

    Hi All
    I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have  SMSPXE.log since it never gets to that point and the distmgr.log  never reaches
    that point either. I've tried
    uncheck pxe boot option - restart - re-check
    uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
    uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
    the above with installing wds unconfigured
    Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
    WDS PXE Secondary Site Issues but mine is on the Primary Site.
    ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
    DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
    Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
    Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
    Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)

    HI again, sorry for the late reply.
    By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
    I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
    The Account used is a local admin and the distribution point is located on the primary site server.
    EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
    On error (source: MsiInstaller) below:
    Product Application Web Service -- Internal Error 25001. 80070490
    I havent mentioned it earlier, but the Server OS is Server 2012.
    I hope this might help you help me :)
     

  • SCCM 2012 SP1 - Native SQL backup

    HI Experts,
    I got native SCCM 2012 SP1 SQL backup content (But no site server backup). Can i still restore the SCCM 2012 SP1 primary site server. Please advice
    Regards, Pratap

    With Configuration Manager 2012 SP1+, it is possible to recover a site (secondary sites don’t count) using a standard, native SQL Server database backup.
    "Configuration Manager can recover the site database from the Configuration Manager backup maintenance task or from a site database backup that you perform by using another process. For example, you can restore the site database from a backup that is performed
    as part of a Microsoft SQL Server maintenance plan. Starting in Configuration Manager SP1, you can restore the site database from a backup that is performed by using System Center 2012 Data Protection Manager (DPM). For more information,
    see
    Using Data Protection Manager to Back up Your Site Database."
    http://technet.microsoft.com/en-us/library/gg712697.aspx#BKMK_SiteDatabaseRecoveryOption

  • SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

    Hi All, 
    Good day to all you. 
    I would like to seek all your help on this issue that i have encountering. 
    My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
    Error: 
    Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
    Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
    SMS_WSUS_SYNC_MANAGER  7/22/2014 3:05:32 PM 5776 (0x1690)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
    ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER  7/22/2014 3:05:32 PM 5776 (0x1690)
    Sync failed. Will retry in 60 minutes
    SMS_WSUS_SYNC_MANAGER  5776 (0x1690)
    below are wsyncmgr.log:
    Setting sync alert to active state on site C01  SMS_WSUS_SYNC_MANAGER (0x1690)
    Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    Starting Sync SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    Read SUPs from SCF for MYHQKUL990707S.sdb.com  SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
    Found 1 SUPs SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    Found active SUP MYHQKUL990707S.sdb.com from SCF File.
    SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
    5776 (0x1690)
    Synchronizing WSUS server MYHQKUL990707S.sdb.com  SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
    STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
    5776 (0x1690)
    Using account sdb\SCCM-Admin to connect to WSUS Server
    SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
    Synchronizing WSUS server myhqkul990707s.sdb.com ...
    SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
    sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
    440 (0x01B8)
    Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
    Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
    SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
    5776 (0x1690)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
    ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
    5776 (0x1690)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    5776 (0x1690)
    All response is much appreciated
    Thank You

    Hi,
    I recommend you look at the IIS log. Maybe it can give us some clues.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

    I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
    The error I get in ccmsetup.log is:
    <![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
    <![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
    <![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
    Action: CcmRegisterHostingConfiguration.
    ErrorMessages:
    Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    ]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
    <![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
    <![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
    <![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
    <![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
    I have this on my primary and secondary servers as well.
    Is upgrading to R2 recommended and will that solve this issue ?
    When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
    But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

    Try the following steps to specify the hotfix when installing the client.
    1. Open an elevated command prompt.
    2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
    \\servername\SMS_SITE\Client\hotfix folder:
    \ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp 
    Juke Chou
    TechNet Community Support

  • SCCM 2012 SP1 to SCCM 2012 R2 - Side by Side

    Hi Friends,
    Currently our SCCM infrastructure is running with a CAS site, 2 Primary Sites and 8 Secondary sites with SCCM 2012 SP1. Now we want to update this infrastructure from SCCM 2012 SP1 to 2012 R2. But we want remove CAS site and to keep only single Primary Site.
    Can this be done in Side by Side migration from SCCM 2012 SP1 to SCCM 2012 R2 ? If yes then please suggest how to migrate all data (Packages/Clients) from SCCM 2012 SP1 to new infra on SCCM 2012 R2.
    Thanks in advance.

    You don't have many (supported) options here. Detaching a site is not possible, so indeed your only option left is to migrate. Problem here is that the supported scenario is from a ConfigMgr 2012 R2 site to a ConfigMgr 2012 R2 site (see:
    http://technet.microsoft.com/en-us/library/gg682006.aspx). That means you should first upgrade your old environment before you can start with your migration.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content

    I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
    straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
    What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
    the config on the switch is very simple and this shouldn't be the case.
    I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
    I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
    When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
    This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
    Anyone has any clues?
    thanks
     - Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe 
     - Download done setting progress bar to 100
    VerifyContentHash: Hash algorithm is 32780
    c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
    c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
     - Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
     - DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
     - DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
     - Failed to resolve package source "GTK0000C"
     - Exiting ConfigureEx: 0x80091007
     - BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
     - Failed to configure OSD setup hook (0x80091007)
     - Failed to configure OSD setup hook (0x80091007)

    is this the only indication of a problem in your smsts.log file ? did you apply the
    authenticode hotfix or have you
    downloaded the SP1 media after that hotfix was applied ?
    Step by Step Configuration Manager Guides >
    2012 Guides |
    2007 Guides | I'm on Twitter > ncbrady

  • Reporting services keep failing on SCCM 2012 SP1

    I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
    Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
    System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
       at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
       at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
    Thx,
    Joe
    Thx, Joe

    Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
    CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
    It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
    It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
    I hate to say this but Why do you think this problem has anything to do with CM12?
    If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Prestaged OSD using SCCM 2012 SP1 windows Partition variable is not being set

    Hello All  I need some assistance with a workaround.
    I am using a presaged task sequence created from a working network / PXE deployment TS for windows 7.
    This TS sets a variable for the OS partition called "Windows" and the value is set in the Partition Disk task.
    Problem is this value is not being read from a prestaged due to the OEMMedia condition skipping this partition and format task.
    Question is how do I get it to read and or set the value for that partition?
    From what I have found on Google this was an issue in beta of MDT but was fixed in RTM.  I am not using MDT TS but I do have it installed. Any idea if this is a known issue with SCCM 2012 sp1 TS? 
    Edit: also noticed that the variable's case is different and will not let me change it.
    Variable under format is "windows"  variable under Apply OS is "Windows"  when I change them to be the same then close and reopen they revert back to the above.  Are these variables case sensitive?
    Edit: for now I have changed it from variable to next available partition.  I tested it twice so far it seems to be using the correct partition and it remains to be called the C drive.  For now this will be my solution.

    When you say "presaged task sequence created from a working network / PXE deployment TS" are you saying this is still a network boot process? Or have you done "Create Task Sequence Media"?
    Dustin Estes - MCP
    yes when i say prestaged that is using the create task sequence media then selecting prestaged.

  • SCCM 2012 SP1 - How many servers do I need?

    I'm planning a SCCM test environment using SCCM 2012 SP1 with the goal of using DCIP 3.1. DCIP 3.1 only supports up to SCCM 2012 SP1. I'm new to SCCM and I'm planning to follow Kevin Holman's ConfigMgr 2012 SP1 -QuickStart deployment Guide (Sorry, I can't
    post links on the forum yet.)
    I'm using a virtual environment to build this out so I can create more machines as needed.
    In the guide two systems are used, DB3 and CM1 each with designated services. Could those services be safely installed on one machine instead of two? Why choose to split the SQL and Database Services, from the Primary Site Server, Management Server, and Web
    Console Server?
    Thank you!

    For a lab and most small(ish) production sites you can get away with 1 server.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • SCCM 2012 SP1 - SUP Error

    Hi guys,
    i upgraded my SCCM 2012 test Environment to SP1. I have only one Primary Site Server which holds all Roles. Everything seems to work fine except the SUP Role. If i try to synchronize the latest Updates it says that it cannot find a WSUS Server
    and i should check WCM.LOG.
    Within WCM.LOG i can find the following Messages:
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 08:56:44 3620 (0x0E24)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:07:56 3620 (0x0E24)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
        SUP0: CM01.TEST.LOCAL, group = , nlb = SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Bad Configuration, SUPs present but no default SUP SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Default SUP not specified SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Setting new configuration state to 0 (WSUS_CONFIG_NONE) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Waiting for changes for 47 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    So in General this tells me that it can find a SUP but this one is not specified as a DEFAULT SUP. How can i tell SCCM that this is my Default SUP? (I only have this one and it is configured to sync from Microsoft Update site). I have never seen
    this before so i guess this is related to SP1?
    PS: I also installed the 2 necessary WSUS Updates before i upgraded to SCCM SP1.
    Thanks in lot in advance.
    Stefan

    None of your solutions apply to WSUS 4.0 on Server 2012
    None of the specified patches applies or will run on a Windows 2012 Std server. They either report that WSUS 3 SP 2 isn't installed OR that the patch isn't applicable to the server version installed.
    Here is a excerpt of MY WCM.LOG
    I have a fully patched Windows 2012 Standard Server, Fully updated SCCM 2012 SP1 installed, and am connected to a fully patched SQL2012 Server on another fully patched Windows 2012 Std server.
    Ports 8530 and 8531 designated on both the WSUS 4.0 Role and SCCM 2012 SP1 system (both are on same server)
    SUP0: SCCM2012.xxdomainname.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
    Bad Configuration, SUPs present but no default SUP  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
    Waiting for changes for 11 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
    Wait timed out after 11 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
    Randall

  • Sccm 2012 sp1 evaluation expired

    Hi
    I have one primary  SCCM 2012 SP1 server, this week  SCCM evaluation has expired. Tried the
    maintenance option from the start programs, but activation tab is missing. please help.
    Midhun.PS

    Better late than never, right?  I had the same exact problem.  Started playing around with the registry key values in CCM, CCMSetup and SMS\Setup keys. 
    Looooooooong story short, but this is mostly for everyone ELSE that is coming here with the same problem:
    1. regedit
    2. HKLM\Software\Microsoft\SMS\Setup
    3. Find Product ID string.  It will be set to NONEVAL.  Change the value to EVAL.
    4. Re-run the setup.  3rd page will give you the option for the key now...
    Holy... pain in the _____ (you insert a word for how ridiculously painful this process was)
    Good luck
    PCFixerGuy

  • SCCM 2012 SP1 and Exchange 2013 Connector Get-Recipient cmdlet failed

    I have been trying to get my Exchange Connector working with SCCM 2012 SP1 for a week or so now. Every post tells me that the Get-Recipient cmdlet failed is a security permissions error. I have given the service account running the connector full Exchange
    Server Management rights including Recipient Management and Organization View-Only. I have even tested remote power shell to the CAS server and run the cmdlet with no issues.
    For some reason it just does not want to work for me. Has anyone been running into this issue?

    Now before you read the following error and say oh this is a permission issue I am telling you it is not. I have given the account full Exchange admin rights and I have even tested the Get-Recipient cmdlet remotely to the Exchange server and it works with
    no issues. I have also noticed multiple forum posts with the exact same issues.
    I have noticed one thing that stands outs "Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean"
    I believe this issue may be related to changes in the powershell commands with Exchange 2013, but I do not know where or how to edit the ps1 script.
    I am getting the error below:
    ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed. Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to
    type System.Boolean."~~   at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)~~   at System.Management.Automation.PowerShell.Invoke(IEnumerable input, PSInvocationSettings
    settings)~~   at System.Management.Automation.PowerShell.Invoke()~~   at Microsoft.ConfigurationManager.ExchangeConnector.Connector.Invoke(PSCommand cmd)
    SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
    4200 (0x1068)
    STATMSG: ID=8817 SEV=W LEV=M SOURCE="SMS Server" COMP="SMS_EXCHANGE_CONNECTOR" SYS=MySite SITE=MySiteID PID=xxx TID=xxx GMTDATE=Thu Sep 19 07:00:01.653 2013 ISTR0="Get-Recipient" ISTR1="ParameterBindingFailed,Microsoft.Exchange.Management.RecipientTasks.GetRecipient"
    ISTR2="Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."" ISTR3="" ISTR4="" ISTR5="" ISTR6=""
    ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
    4200 (0x1068)
    ERROR: [MANAGED] Exception: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."
    SMS_EXCHANGE_CONNECTOR 9/19/2013 12:00:01 AM
    4200 (0x1068)

  • SCCM 2012 SP1 Beta Site System Roles Installation issues

    My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
    I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
    Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
    I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
    because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
    denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
    wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 sp1: howto remotely execute powershell commands?

    Hi,
    Please advise on howto run remote powershell scripts to an SCCM 2012 SP1-server.
    Locally importing the module (on sccm 2012) works fine, but not remotely. It tells I should run from x86 console, but I am!
    Please advise.
    J.
    Jan Hoedt

    Start the SCCM Console and start Powershell from there. (left-top "Connect via Windows Powershell")
    This will register the CM PSDrive for the user who started the console.
    The PSDrive will not be available to a PowerShell IDE or another editor. However in looking at this, it shows that it's loading "Microsoft.ConfigurationManagement.PowerShell.Types.ps1xml". So I tried the following:
    Update-TypeData
    -PrependPath
    ($Env:SMS_ADMIN_UI_PATH.Substring(0,$Env:SMS_ADMIN_UI_PATH.Length-5)
    +
    '\Microsoft.ConfigurationManagement.PowerShell.Types.ps1xml')
    That seems to load the correct datatype. However I still get an error doing the following command (example):
    New-PSDrive
    -Name
    "CAS"
    -PSProvider
    CMSite
    -Root
    "ServerUNC"
    Error:
    New-PSDrive : Object reference not set to an instance of an object.
    Hopefully someone knows more about TypeData...
    -Ken

Maybe you are looking for

  • Problem with iTunes and TeamSpeak

    When I listening music in iTunes and I use TeamSpeak to talk with my friends, iTunes sound fail. iTunes is incompatible with TeamSpeak, so I want to know if you can make a patch to this. TeamSpeak Website www.goteamspeak.com Regards. Emilio Jéldrez

  • In Pre-Exit, prevent method from being called

    I have created an enhancment for a webdynpro component. Then, I have defined a pre-exit for a method in the component controller. Inside the pre-exit, I do a couple of checks, and depending on them, I would like to skip the processing of the method f

  • Customer Quotation using BAPI_QUOTATION_CREATEFROMDATA

    Hi, I need to create customer quotation by using bapi BAPI_QUOTATION_CREATEFROMDATA. i am passing below data with minimum required fields but i am getting error message like "Please enter Sold-to-party or Sip-to-party'.. why i am not getting. Can any

  • DAC Configuration Issue

    Hi, I am getting following error while configuring DAC. PS: I have copied the required (ocjdbc14.jar) JDBC file from Oracle folder to ...DAC\lib Kindly advice. MESSAGE:::Oracle (Thin) driver not available! EXCEPTION CLASS::: java.lang.IllegalArgument

  • How to stroke text as group w/effects

    So, created text -- added warp effect. What I'd normally do is just then expand -- then unite -- then stroke it. But -- I'm sure there's a way where I could keep that text and effect editable while adding a stroke to look as if I united so the stroke