SCCM Driver Injection : What am I missing? Need help with getting drivers installing correctly in my environment.
Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!
You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala
Similar Messages
-
HT4199 I need help with getting my printer to print, PLEASE.
I need help with getting my printer to print, Please.
What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert -
Major Problem Here! I have no idea what to do and need help with OSX
Hello all, thanks for viewing my topic.
First of all, I have OSX 10.2.8
I just got a christmas gift - an Ipod Nano
I went into my Itunes only to find out that I need Itunes 7.0, but when I went to download it from the site, after running the install, it said I needed OSX 10.3.4
So, I looked over and over for 10.3.4 only finding I needed 10.3 to run that
So basically, i'm stuck here. Can I not use my Christmas gift? What do I have to do to get either the newest version of OSX to work with Itunes, or get my new Ipod 4G nano to work with my Itunes. Either solution would be great.
ThanksWelcome To Discussions CJAAA!
Some additional information.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.8 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
The discs must look exactly like the images in the above links.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update, to upgrade to the current version.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Orders must be mailed by March 19, 2007
AppleRescue, also sells a Tiger installation set on CD
Shop Carefully, Examine All Documentation, And Good Luck!
ali b -
Need help with some JS installing Bumpbox 2.0
I am trying to add a lightbox effect to a pdf on my website, I found a Javascript plugin at http://www.artviper.net/bumpbox-demo/index.html that looks like it should do the trick, but I am having trouble getting it to work.
To narrow down the problem I created a test.html file that I stuck in the root directory of the folder I downloaded from their site (so I am working locally off my desktop at this point)
My code is as follows... I feel like I am missing something super obvious, does anyone see it? (do I need to define the .bump class in the css file?)
Thank you in advance for the much needed help!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
<a href="http://www.artviper.net/test.pdf" class="bump" rel="800-350">PDF File »</a><br />
<script type="text/javascript" src="js/mootools.js"></script>
<script type="text/javascript" src="js/bumpbox-2.0.1.js"></script>
<script type="text/javascript"> doBump( '.bump',750, 500, '111', '900', '0.8', 5, 1 ,'333', 15,'000', 4,
Fx.Transitions.Bounce.EaseOut,
Fx.Transitions.Bounce.EaseOut,
'images/demo_bg_bumpbox.png',
'top left',
'repeat-x' ); </script>
</body>
</html>These paths won't work because they point to files on your local hard drive.
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/mootools.js"></script>
<script type="text/javascript" src="file:///Macintosh HD/Users/Robert/Downloads/bumpbox Folder copy/js/bumpbox-2.0.1.js"></script>
Are you working within a properly defined local site?
Did you save those javascript files to the js folder in your local site root?
Correct path to scripts for this test page should look like this:
<script type="text/javascript" src="../js/mootools.js"></script>
<script type="text/javascript" src="../js/bumpbox-2.0.1.js"></script>
PS. Do not add spaces to folder or file names. It can create problems for web files.
Nancy O. -
Hi i need help with getting my homework for school
im in a nine week class that ends tommorw and need help go\etting my program working properly these are the requirements ofr the assignments:
Modify the Inventory Program by adding a button to the GUI that allows the user to move
to the first item, the previous item, the next item, and the last item in the inventory. If the
first item is displayed and the user clicks on the Previous button, the last item should
display. If the last item is displayed and the user clicks on the Next button, the first item
should display.
· Add a company logo to the GUI using Java graphics classes.
Modify the Inventory Program to include an Add button, a Delete button, and a Modifybutton on the GUI. These buttons should allow the user to perform the corresponding actions on the item name, the number of units in stock, and the price of each unit. An item added to the inventory should have an item number one more than the previous last item. Add a Save button to the GUI that saves the inventory to a C:\data\inventory.dat file. Use exception handling to create the directory and file if necessary. Add a search button to the GUI that allows the user to search for an item in the inventory by the product name. If the product is not found, the GUI should display an appropriate message. If the product is found, the GUI should display that products information in the GUI. Post final .class and .java files as an attachment.
this is what i have there are three java files im puttong in here
first is the panel frame
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.*;
import java.text.NumberFormat;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFramethis is the original part again with the code tag added
import java.awt.GridLayout;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
import javax.swing.JLabel;
import java.awt.GridBagLayout;
import java.awt.GridBagConstraints;
import java.awt.Component;
import javax.swing.SwingConstants;
import javax.swing.Icon;
import javax.swing.JComboBox;
import javax.swing.JTextArea;
import javax.swing.JList;
import java.util.;
import java.text.NumberFormat;
import javax.swing.;
import java.awt.;
import java.awt.event.;
import java.net.URL;
import java.io.*;
import java.util.Scanner;
import javax.swing.JOptionPane;
import java.text.NumberFormat;
public class PanelFrame extends JFrame
private JPanel buttonJPanel; // panel to hold buttons
private JButton buttons[]; // array of buttons
private JLabel label1; // JLabel iventory number
private JLabel label2; // JLabel product name
private JLabel label3; // JLabel product price
private JLabel label4; // JLabel product in stock
private String p_ProductName; // private variable for the employee name.
private int p_UnitCount; // private variable for the hours worked.
private double p_UnitPrice; // private variable for the hourly wage.
private int p_ItemNumber; // private inventory number
//create inventory object
Inventory myInventory = new Inventory ();
// no-argument constructor
public PanelFrame()
super( "Panel Demo" );
//Add items to the inventory within the Invntory
myInventory.addItem(new productinfo(1,"Html a Begginers Guide",14,29.99));
myInventory.addItem(new productinfo(2,"Html 4 for Dummies",6,29.99));
myInventory.addItem(new productinfo(3,"Visio Step by Step",7,24.99));
myInventory.addItem(new productinfo(4,"APA Publication Manual",14,47.99));
myInventory.addItem(new productinfo(5,"The Gregg Reference Manual",14,37.56));
setLayout( new FlowLayout() ); // set frame layout
// JLabel constructor with a string argument
label1 = new JLabel( "Inventory Number:%s: %d\n ",p_ItemNumber );
label1.setToolTipText( "This is Inventory number" );
add( label1 ); // add label1 to JFrame
label2 = new JLabel( "\n\nProduct Name: %s: %s\n", p_ProductName);
label2.setToolTipText( "This is Product Name" );
add( label2 ); // add label1 to JFrame
label3 = new JLabel( "\n\nPrice : %s:$%.2f\n",p_UnitPrice );
label3.setToolTipText( "This is product Price");
add( label3 ); // add label1 to JFrame
label4 = new JLabel( "\n\nQuanity %s: %d\n",p_UnitCount);
label4.setToolTipText( "This is Quanity in stock: " );
add( label4 ); // add label1 to JFrame
buttons = new JButton[ 4 ]; // create buttons array
buttonJPanel = new JPanel(); // set up panel
buttonJPanel.setLayout( new GridLayout( 1, buttons.length ) );
String names[] = { "First", "Previous", "Next", "Last" };
JButton buttons[] = new JButton[ names.length ];
// create and add buttons
for ( int count = 0; count < buttons.length; count++ )
buttons[ count ] = new JButton( names[ count ] );
buttonJPanel.add( buttons[ count ] ); // add button to panel
} // end for
// setup the logo for the GUI ...image needs to be in same directory as source code
URL url = this.getClass().getResource("book103.gif");
Image img = Toolkit.getDefaultToolkit().getImage(url);
// scale the image so that it'll fit in the GUI
Image scaledImage = img.getScaledInstance(100, 100, Image.SCALE_AREA_AVERAGING);
// create a JLabel with the image as the label's Icon
Icon logoIcon = new ImageIcon(scaledImage);
JLabel companyLogoLabel = new JLabel(logoIcon);
companyLogoLabel.setBorder(BorderFactory.createEmptyBorder(3,3,3,3));
// add the logo to the GUI
getContentPane().add(companyLogoLabel, BorderLayout.WEST);
add( buttonJPanel, BorderLayout.SOUTH ); // add panel to JFrame
} // end PanelFrame constructor
} // end class PanelFrame -
Needing help with Bootcamp Drivers on my late 2009 27" iMac running windows 7 64-bit.
Hey, installed Windows 7 on my late 2009 27" iMac (Have previously done so and worked flawlessly, magic mouse could scroll etc) but had to remove the partition as I required more of my hard drive than anticipated, so I removed the partition and went to install Windows, everything worked fine until I wanted to install the bootcamp drivers, to which it said that my Mac doesnt support 64-bit... which it does as I've been running it for months with no problems whatsoever. Would appreciate if someone could tell me which version of bootcamp would be best to install and how to do so if the procedure isn't that simple. Also I get no sound from the Windows partition, as I get a red light from the audio Jack, which is clearly from the lack of drivers as it works fine on the OS X partition.
I have snow leopard install discs handy although the version of bootcamp on that differed from the one I had, which was much better.Did you download the correct drivers for your Mac? The Late 2009 iMac needs these drivers > http://support.apple.com/kb/DL1630
-
Need help with "get info" dialog box
Hi Everyone!
I need some help with trying to figure out what some of the options are in the "Get Info" dialog box. I've searched the iTunes help and these forums, but can't find anything.
So, in the options tab,
1. What does "Part of compilation" Y/N, do for me?
2. Same for "Remember Position"
3. And finally, "Gapless album"
Thanks, Vince.1. when you import a compilation album (like an 80's compilation or something), itunes will import it as
song 1, artist 1, 80's greatest hits
song 2, artist 2, 80's greatest hits etc
Click part of a compliation means that, it means that it would keep them altogether rather than having lots of songs everywhere
2. If you start playing a song, then stop, part way through, when you next come to the song, itunes will remember where you left off
3. Albums like jean michel jarre, classical, mike oldfield, etc, have many songs which merge into each other. Having gapless album ticked will ensure that, when playing the album, there are no gaps between songs -
Need help with DM software install - installer thinks I have previous installation, but I don't
This is really frustrating me, but I recently uninstalled v4.3 and have been struggling to re-install ANY version of the DM onto my XP Pro machine. I have followed every bit of advice I can find including clean un-install / install, change the TEMP environment variable, unzip the installer and store locally, but I still can't figure this out.
I've been studying the installer log file, and I think this might be a clue:
InstallShield 14:12:58: Registering Msi Server...
MSI (c) (4C!DC) [14:12:58:742]: Note: 1: 2732 2: 0
InstallShield 14:12:58: Invoking script function RIM_CheckForDesktopDowngrade
RIM: Found existing DesktopMgr.exe at: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
RIM: Failed to retrieve version info from: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
InstallShield 14:12:58: CallScriptFunctionFromMsiCA() ends
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (55) of type 790531 for thread 3804
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (54) of type 790531 for thread 3804
Action ended 14:12:58: RIM_CheckForDesktopDowngrade. Return value 3.
MSI (c) (4C:40) [14:12:58:789]: Doing action: SetupCompleteError
Action 14:12:58: SetupCompleteError.
Action start 14:12:58: SetupCompleteError.
Info 2898.For Tahoma8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For TahomaBold10 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action 14:12:58: SetupCompleteError. Dialog created
It seems to think that I have a previous version installed in my Program Files, but no such executable exists (as I mentioned earlier, I have followed the clean install procedures more than once
Any ideas?
Message Edited by tbarcelo on 05-19-2009 02:21 PM
Solved!
Go to Solution.Hi and Welcome to the Forums!
You say you followed the instructions for a clean install -- but what about a clean un-install? Those instructions are here...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&slic...
Edit -- oh...and reboots...lots of them...one between each step...after an uninstall...after an install...etc.
Message Edited by sdgardne on 05-19-2009 11:09 AM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I just buy iPad 4 from guy which was posted on Craigslist and I got problem in activation process . It ask me to enter previous iPad user Apple ID and password to get access . And I tried to contact that guy for user I'd and password but he won't answer me .so anybody have idea how to solve this problem
onyok13 wrote:
... i cant use the iphone that i bought from a local buy, swap and sell site.... i just wanna ask you people what else can i do with it to be activated again,
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
Need helps with getting ODI CDC to work
Hi, I'm new to ODI. I'm trying to get the ODI CDC to work and for now I'm only interested in seeing that the changes are captured correctly.
I've set the d/b to archivelog mode and granted all the rights I can think of to the d/b user. I've defined the CDC in Consistent Mode for the model, defined the CDC for my tables, started the journal, etc.
When I right-click on the table and do Change Data Capture/Journal Data... I get ORA-00904 Table or View not found (stack trace below)
What is missing? Thanks for your assistance.
See com.borland.dx.dataset.DataSetException error code: BASE+62
com.borland.dx.dataset.DataSetException: Execution of query failed.
at com.borland.dx.dataset.DataSetException.a(Unknown Source)
at com.borland.dx.dataset.DataSetException.queryFailed(Unknown Source)
at com.borland.dx.sql.dataset.QueryProvider.a(Unknown Source)
at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
at com.sunopsis.graphical.frame.a.jb.dj(jb.java)
at com.sunopsis.graphical.frame.a.jb.<init>(jb.java)
at com.sunopsis.graphical.frame.a.jd.<init>(jd.java)
at com.sunopsis.graphical.frame.a.je.<init>(je.java)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sunopsis.graphical.frame.bb.b(bb.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source)
Chained exception:
java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
at com.borland.dx.sql.dataset.o.f(Unknown Source)
at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
at com.sunopsis.graphical.frame.a.jb.dj(jb.java)
at com.sunopsis.graphical.frame.a.jb.<init>(jb.java)
at com.sunopsis.graphical.frame.a.jd.<init>(jd.java)
at com.sunopsis.graphical.frame.a.je.<init>(je.java)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sunopsis.graphical.frame.bb.b(bb.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source)
java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:965)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1051)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
at com.borland.dx.sql.dataset.o.f(Unknown Source)
at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
at com.sunopsis.graphical.frame.a.jb.dj(jb.java)
at com.sunopsis.graphical.frame.a.jb.<init>(jb.java)
at com.sunopsis.graphical.frame.a.jd.<init>(jd.java)
at com.sunopsis.graphical.frame.a.je.<init>(je.java)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sunopsis.graphical.frame.bb.b(bb.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source)Update...
I traced it to the Start Journal step issue. The Operator shows that step 8 - Journalizing - xxxx - Create Change Set, produces Oracle error ORA-00600. What does this means? The SQL that it tries to execute is:
==============================================
BEGIN
DBMS_CDC_PUBLISH.CREATE_CHANGE_SET(
change_set_name => 'TID_SOURCE',
description => 'Sunopsis change set for model : TID_SOURCE',
change_source_name => 'HOTLOG_SOURCE',
begin_date => sysdate
END;
==============================================
The strack trace is as follows:
600 : 60000 : java.sql.SQLException: ORA-00600: internal error code, arguments: [kcbgcur_9], [8388665], [23], [25165824], [8388608], [], [], []
ORA-06512: at "SYS.DBMS_CAPTURE_ADM_INTERNAL", line 121
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 560
ORA-06512: at line 1
java.sql.SQLException: ORA-00600: internal error code, arguments: [kcbgcur_9], [8388665], [23], [25165824], [8388608], [], [], []
ORA-06512: at "SYS.DBMS_CAPTURE_ADM_INTERNAL", line 121
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 560
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source) -
Need help with arch linux install!
Hello, let me start off by telling you about the predicament I'm in at the moment. I've been trying to install arch linux on with a cd-drive that has been failing for a little over a year now, so you can already see where my problem starts! The cd-drive, however will work with such cd's as Windows, Ubuntu, and Slackware, which I'm happy with. Yet, archlinux doesn't work so much.
And now maybe my solution. I've got a usb cd drive, that I've had laying around that works well, just not well enough for my bios to be able to boot from; which is horrible I know. I've searched the bios for loading a usb cd drive and everything else, including google so I don't think I'm going to get anywhere with that one. Anyways what I'm thinking of doing is that when archlinux is in the terminal right before you type the "/arch/setup" command, I would like to know if there is any command that allows you to change the cd it boots the cd from to go right into the installation. I'm still working on easying my out of the newbie stage of linux at the moment, but I've never run into a command like that, that would help me out. Hopefully there is one though, because I would very much like to archlinux to work, so please respond! Right now I'm running elinks through the terminal right before you type "/arch/setup". Thanks!loosec wrote:
So you get through the boot process just fine then on your old CD drive. The only thing you should have to do after that is to throw your CD into the USB CD drive and proceed with the installation. The installer should then ask you what CD drive you would like to use when you choose install from CD.
Another way to do it would be to switch cd like above and then manually mount your /dev/[your_usb_cd_here] on /src. The installer then has to be pointed to this place as the source of your installation. To find out what your usb cd drive is called you should unplug it, then replug it and run: dmesg
The mount command might also need to be shown that this is a cd so:
mount -t iso9660 /dev/[usb_cd_device_name] /src
should do the trick.
If you really want to learn more of what the installer does (and fail installing a few times) you should also check out the command
/arch/quickinstall
If your Internet connection is up for it, it seems like you could just choose an FTP install instead.
Goodluck!
Once the CD is removed from the drive that it was booted from. the installation will not continue, as the arch install always goes back to the boot drive to continue read the neccessary information for the install. I do not think there is a way to fool the computer into booting from one cd drive and then continueing on with another. To do this you would have to tell the computer that you are switching drives.
If you can boot up the CD kernel and get to where you type in /arch/setup then the next thing I would od is FTP install. That would limit your CD rom drie usage.
There is also a way to install arch from within another distro, EVEN ANOTHER LIVECD! <-- this may be your best bet. Check the wiki, there is tons of information there.
Last edited by rooloo (2008-08-16 12:32:00) -
Need help with getting variable from static
Hello,
What I am building is an application that prompts for username/password before it shows the main screen. Once they have successfully logged in, I need to assign the username that they used, in order to use it for a button event if the make any updates.
Here is the code that I have tried to use.
public String username;
///This set's the public variable username
public void setUserName(String UserName){
username = UserName;
/////////////////Here is where they login, and assign the name to setUsername
public static void main(String args[]) throws SQLException {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
JFrame frame = new JFrame();
JTextField userName = new JTextField();
JTextField passWord = new JTextField();
Object[] options = {"OK","CANCEL"};
Object[] msg = {"UserName:", userName, "Password:", passWord};
final JOptionPane op = new JOptionPane(msg, JOptionPane.PLAIN_MESSAGE, JOptionPane.OK_CANCEL_OPTION){};
JDialog dialog = op.createDialog(frame, "Please Login");
dialog.show();
int result = JOptionPane.OK_OPTION;
try {
result = ((Integer)op.getValue()).intValue();
}catch(Exception uninitializedValue){}
if(result == JOptionPane.OK_OPTION) {
String userID = userName.getText();
String passID = passWord.getText();
Main myMain = new Main();
myMain.setUserName(userID);
if(!userID.equals("") && !passID.equals("")) {
new Main().setVisible(true);
}else {
// user cancelled
////here is the button event that also will need the username
private void selButtonActionPerformed(java.awt.event.ActionEvent evt) {
Connection conn = null;
Statement stmt3 = null;
Statement stmt4 = null;
ResultSet rset3 = null;
ResultSet rset4 = null;
String usernum = null;
String xemu = null;
String loc = null;
String ustat = null;
String manager = null;
String dept = null;
String Add = "Add";
String Update = "Update";
String groupID = "9999";
Vector columnNames = new Vector();
Vector data = new Vector();
String Manager_info[] = {"managerindex", "managers", "managername"};
String Account_info[] = {"acctypeindex", "acctype", "acctypedesc"};
String Group_info[] = {"groupnum", "groups", "groupcode"};
String System_info[] = {"systemindex", "systems", "systemname"};
String Dept_info[] = {"departindex", "departments", "departname"};
String Xemu_info[] = {"xemuindex", "xemulator", "xemudesc"};
String Location_info[] = {"locindex", "location", "locdesc"};
String Ustatus_info[] = {"ustatusindex", "userstatus", "ustatusdesc"};
Date myDate = new Date();
SimpleDateFormat formatter = new SimpleDateFormat("dd-MMM-yy");
String today = formatter.format(myDate);
System.out.println(username);
I am trying to set the public username variable to what the person enters, however since I am creating a seperate instance of it, I don't believe it will work. Any help would be very much appreciated.
Thanks.
JoshI am developing in Netbeans. If I try to remove the static keyword from main(), netbeans canno't find a main to run. I have created the User class.
Here is the main again to show what I have done.
public static void main(String args[]) throws SQLException {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
User user = new User();
JFrame frame = new JFrame();
JTextField userName = new JTextField();
JTextField passWord = new JTextField();
Object[] options = {"OK","CANCEL"};
Object[] msg = {"UserName:", userName, "Password:", passWord};
final JOptionPane op = new JOptionPane(msg, JOptionPane.PLAIN_MESSAGE, JOptionPane.OK_CANCEL_OPTION){};
JDialog dialog = op.createDialog(frame, "Please Login");
dialog.show();
int result = JOptionPane.OK_OPTION;
try {
result = ((Integer)op.getValue()).intValue();
}catch(Exception uninitializedValue){}
if(result == JOptionPane.OK_OPTION) {
String userID = userName.getText();
String passID = passWord.getText();
user.setName(userID);
user.setPassword(passID);
if(!userID.equals("") && !passID.equals("")) {
//Auth.setUserName(userID);
//Auth.setPassword(passID);
new Main().setVisible(true);
}else {
// user cancelled
This set's the variables
Here is the beginning of the evt that I am using to try and get the data.
private void selButtonActionPerformed(java.awt.event.ActionEvent evt) {
Connection conn = null;
Statement stmt3 = null;
Statement stmt4 = null;
ResultSet rset3 = null;
ResultSet rset4 = null;
String usernum = null;
String xemu = null;
String loc = null;
String ustat = null;
String manager = null;
String dept = null;
String Add = "Add";
String Update = "Update";
String groupID = "9999";
Vector columnNames = new Vector();
Vector data = new Vector();
User user = new User();
String User = user.getName();
System.out.println(User);
String Manager_info[] = {"managerindex", "managers", "managername"};
String Account_info[] = {"acctypeindex", "acctype", "acctypedesc"};
String Group_info[] = {"groupnum", "groups", "groupcode"};
String System_info[] = {"systemindex", "systems", "systemname"};
String Dept_info[] = {"departindex", "departments", "departname"};
String Xemu_info[] = {"xemuindex", "xemulator", "xemudesc"};
String Location_info[] = {"locindex", "location", "locdesc"};
String Ustatus_info[] = {"ustatusindex", "userstatus", "ustatusdesc"};
Date myDate = new Date();
SimpleDateFormat formatter = new SimpleDateFormat("dd-MMM-yy");
String today = formatter.format(myDate);
String [] str = {
"EmpID", "Account", "System", "Type", "Status", "UserID", "Group"
This gives me a null on the println, how can I get the data that was entered in main()?
Thanks,
Josh -
K9N SLI Platinum MS7250 ver1.1 ... need help with Windows 7 install
Hello,
Having an intermittant issue with Windows 7 32bit. During startup Windows 7 gets stuck at the logo screen. Not always though. Every 7-8th reboot it will make it past and go all the way into Windows 7. I've tried all sorts of combinations of "ebabling/disabling". This system ran XP professional for 3 years without any issues. Currently, I have the most luck by connecting the keyboard and mouse to PS2 and leaving USB disabled. This may not be the issue though. Once I got Win7 to boot I performed driver updates etc.
If someone has suggestions please let me know. I'm about to try the USB bios flash but have never done it before.
Thank you,
BK
CPU: AMD 64 x2 5000+
RAM: 4GB Patriot Viper Series -- set to 2.1V per specs, 800MHz, setup in Dual Channel mode
Video: NVidia GeForce 7900GS
PSU: 600Watt CoolerMaster ATX12V 12volt rails push around 18amps and I'm using the additional power port for power to the video card
Bios ver: 1.3 (this is what shows on the splash screen at startup however CPUID shows 080014 - not sure what that means)
Motherboard: K9N SLI Platinum MS7250 ver1.1Hi Guys,
Thank you for the replies.
- Yes it is a fresh install of Windows7 on a drive that originally had XP Pro
- If I boot into safe mode it does go into Win7 most of the time.
- I posted on the MSI tech support page (http://support.msi.com/index.php) and the response was to upgrade the BIOS. What do you think?
- I've been using this graphics card for three years and is nowhere near as powerful as what's out there now. In fact all of the components are three years old except the RAM
- I tried the old RAM (2GB Corsair) and it also had the same issue. Even at default RAM settings or otherwise. Now I'm back to the 4GB Patriot Vipers.
- What is this capacitor problem people are referring to? Is it a problem specifically on this model board?
Thank you..
BK -
Firefox: Flickering when scrolling - need help with clean 'new' install
Screen is flickering when scrolling (IE does not). I tried disabling add-ons and tried safe mode - neither helped. Running Win 7 Pro 64bit. Uninstalled via 'Programs and Features'. Download and reinstalled Firefox. Now it shows all my previous settings: menu bar, bookmarks bar, etc. Question: how did it get that stuff back if it 'cleanly' uninstalled? Question: how do I know it didn't pick up it's old 'bad habit' from the previous settings? I am an experienced PC user but not Firefox expert. Looking for help lest I have to ditch Firefox completely...
Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
Need help with archive and install
I'm doing and archive and install. The first try was with a defective retail version of OS X Tiger, which did part of the job then stalled. Now I've been able to get a good DVD of this and was able to do an archive and install,although I couldn't check the box to save user settings etc., On the screen it gives me 3 options transfer info from another mac, transfer info from another partition on this mac or do not transfer my info. I'm new to all this, because of the first failed archive and install do I transfer the info from another partition or not transfer at all and find the old folder later on in the process?
Hi D,
I couldn't check the box to save user settings etc.
I think that is due to the partial previous install moving things to a Previous System folder, but not finshing.
Let's see if that's what happened... if you have 2 Macs with Firewire this could be a lot easier.
Oh, do you have a Backup?
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
After quitting DU, look for Terminal in that Menu Bar, open that and type in this...
Wait, let's hear if you have another Mac or Boot Disk first...
Maybe you are looking for
-
In Windows 7, how to make music folders open with iTunes??
Ok, here's my little problem: In Windows 7, I have iTunes installed with WMP disabled. In the registry, I have added a Windows Explorer right-click shortcut for folders so that I can choose to open/play that folder's content in iTunes (see image link
-
HT4098 How can I get my money back from app store when I did not renew my app
I didn't not renew the app that I never really use and now the apple store charge me from my card. How can I get my money back and what number I should call because I totally lost at apple store and don't know what to do. This is really frustrated th
-
How do I get rid of Yahoo and Bing as interloper search engines? I want Google ONLY!!
I installed a "free" winzip-type app, 7-ZIP and installed some other stuff without notice, including Yahoo and bing. I want my Firefox browser back the way it was before yesterday
-
Inspecyion lot for delivery item
Hi Experts, Please help. I have created sales order. Then created Production order with reference to that sales order. Processed poduction order. Stock posted to QM stock. Done Result recording & UD. Stock posted to Unres.use stock. Now I want to qua
-
Repercussions of importing more than 50 users?
Does anyone know what the repercussions are of importing more than 50 users in the workgroup mode? I have about 250 users to import so that they can use the iCal service, and upon importing my 51st, I was warned that the recommended maximum of import