SCCM sql query Client status if active or not

I would like to create an sql report to show if config manager client is active or not, right now I query
v_R_System, for installed client. Any guidance on which table to query for active or not active clients would be helpful.

I had the same question. I found that this query does what I wanted. You can certainly change the number of days since LastHardwareScan.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.ResourceId in (select SMS_R_System.ResourceID from
SMS_R_System inner join SMS_G_System_WORKSTATION_STATUS on SMS_G_System_WORKSTATION_STATUS.ResourceID = SMS_R_System.ResourceID where DATEDIFF(dd,SMS_G_System_WORKSTATION_STATUS.LastHardwareScan,GetDate()) < 90)
I hope this helps :)

Similar Messages

SCCM sql query Client status if active or not in specific Collection

I would like to create an sql report to show if config manager client is active or not in specific Collection
, im using the query belong to "ManoharPusala"
Thank you so much which is
SELECT S.Name0 as 'Computer Name', S.User_Name0 as 'User Name',Case when CS.ClientActiveStatus='1' then
'Active' When CS.ClientActiveStatus='0' then 'Inactive' end as 'Client Active Status' FROM v_R_System S inner Join v_CH_ClientSummary CS on S.ResourceId=CS.ResourceID
is working as well but i want to modify it to query form a specific Collection
, please help me .
Thanks

Hi,
Please try to add "Join _RES_COLL_collectionID as coll on s.Name0=coll.name" to the end of the query.
SELECT S.Name0 as 'Computer Name', S.User_Name0 as 'User Name',Case when CS.ClientActiveStatus='1' then 'Active' When CS.ClientActiveStatus='0' then 'Inactive' end as 'Client Active Status' FROM v_R_System S inner Join v_CH_ClientSummary CS on S.ResourceId=CS.ResourceID join _RES_COLL_PRI0000A as coll on S.Name0=coll.name
Best Regards,
Joyce

Help with sql query the status of A/P Reserve Invoice

Hi,
I am trying to write a query which lists all A/P Reserve Invoice info with OPEN status.
I check the OPCH table and cannot find the rule to tell the status.
The "DocStatus" field has two values only: 'O' for open and 'C' for closed.
However, the status of A/P Reserve Invoice are OPEN, CLOSED, DELIVERED, PAID, etc.
I try to use DocStatus field to filter, but the result does not match what I see in SAP.
Could you please give me some hints about how to get the data I need? Thank you.
Best regards,
Sylvia
Edited by: csylvia on Jun 23, 2011 5:54 AM

Hi Darius,
Thanks for your reply.
However, I don't know what is the relationship between Purchase order and A/P Reserve Invoice.
Do you mean using "SELECT T0.DocEntry FROM OPCH T0, OPOR T1 WHERE T0.DocNum = T1.DocNum AND T1.DocStatus = 'O';" to query the A/P Reserve Invoice data with OPEN status?
But the result is not what I want.
The result of "*SELECT * FROM OPOR WHERE DocStatus = 'O';*" is also not.
I'd like to query A/P Reserve Invoice list with OPEN status, and I try the following sql query:
SELECT DocEntry FROM OPCH WHERE DocStatus = 'O' AND InvntSttus = 'O';
The result is close to what I need, but it's not exactly correct.
Moreover, I don't think the sql query conditions is accurate.
Please give me some advice. Thank you.
Best regards,
Sylvia

Need a SCCM SQL Query Report for Installed Software with Packages and Applications.

I need a report that will show the number of installs of all of the workstations applications and packages over a given period of time.
This will let us know how effective our deployments are and how well the on-demand software is being adopted.
Any help?

Your Install Source might be an option as most SCCM deployments will install from C:\Windows\ccmcache\xx [where xx is a random folder name]. Most software vendors will put an install source in the registry, but not all do, so it won't be completely accurate.
When software is installed manually, the install source path won't be C:\Windows\ccmcache\xx.
Here is a SQL query I have for Install Source:
SELECT v_GS_COMPUTER_SYSTEM.Name0 as 'Computer Name', v_GS_INSTALLED_SOFTWARE.ProductName0 as 'Software Title', v_GS_INSTALLED_SOFTWARE.InstallSource0 as 'Install Source', v_GS_INSTALLED_SOFTWARE.ProductVersion0 as 'Version', v_GS_INSTALLED_SOFTWARE.InstalledLocation0
as 'Installed Location', v_GS_INSTALLED_SOFTWARE.InstallDate0 as 'Install Date'
FROM v_GS_COMPUTER_SYSTEM INNER JOIN v_GS_INSTALLED_SOFTWARE ON v_GS_COMPUTER_SYSTEM.ResourceID = v_GS_INSTALLED_SOFTWARE.ResourceID
WHERE v_GS_INSTALLED_SOFTWARE.ProductName0 like '%Office 365 Pro%'
ORDER BY v_GS_COMPUTER_SYSTEM.Name0

SCCM SQL Query ~

Can you provide me to find the the login hours of particular user name using SQL query.
Thanks

Logon hours is an AD attribute and is not stored in CM07.
If however you are asking when did someone logon to a PC. This info is not stored by CM07 and again you should query ad for this info.
http://www.enhansoft.com/

IF NEW VARIABLE IN SQL QUERY, DISPLAYS AS LAST COLUMN + rpad not working

Hello everybody and thank you in advance,
1) if I add a new variable to my sql query to select a column which was already in the table, it shows it in the report table as the Last column to the right. That is, if I add "street" to
something like city, postcode, street, store, manager, etc, instead of placing street between postcode and store, it places it as i said as the last column to the right.
2) When values are entered into the cells of the tables, yes, they do expand it to their needed lenght, But, only if it is one word. If it is two, like when i enter the value "very good"
then it takes two lines so as with a carriage return within the cell, thus, making it too high the row. I tried to padd spaces with rpad but it did not work. something like rpad(stock, 20,' ')
I must say that the table is in the same page where there is a Form, so as the table grows in lenth it is actually squeezing the form located right on its left.
3) rpad did not work with the most simple syntax, but less would with what i need because it turns out i am using DECODE in order to do a conversion between value displayed and
value returned in my select list of values, something like : DECODE (TO_CHAR (stock),'1','Deficient','2','Average','3','Good','4','Very Good',null) AS stock,
so, i have tried to put the rpad there in several places but either it gave parsing error or it left the column empty not picking any values.
thank you very much
Alvaro

Alvaro
1) That is standard behaviour of apex builder. You can change the display order with the arrows in the report attributes column report.
2) You will have to play with the style attributes of the column to accomplice this. For instance style="white-space:pre;" in the Element Attributes of the column attributes. White-space:normal would thread several space (' ') as 1. So no matter how many you add with rpad they will be shown as 1.
Or set a width either as attibute or in a style class for that column.
Nicolette

Using SQL Query for page item source does not insert populated value

Hi All,
Following are the attribute details of a certain page item on an edit form:
Display As: Text Field
Page Item Source Type: SQL Query
Source value Expression: SELECT a from tab where id = 'ABC'
Although the field appears populated on the screen, but the value is not inserted in the table.
Can anyone help on this?
Thanks in advance,
Annie

Annie:
One solution is to define a pl/sql function that given a date will return the 'run-date'. Something like create or replace function get_prod_date(p_date in date) return date is
retval date;
begin
select run_date into retval from tab_x where run_date=p_date;
return retval;
end;Change the Source Type for the page-item back to 'Database Column'
Set Source value or expression to the 'database column name'
Set 'Post calculation computation' to be
get_prod_date(:pxx_date)
Varad

Help needed for SCCM SQL query

Hello.
I have the below query to extract the workstations build date as well as the hardware info. This works fine.
Select distinct
v_R_System.Name0,
v_GS_COMPUTER_SYSTEM.Manufacturer0,
v_GS_COMPUTER_SYSTEM.Model0,
v_GS_COMPUTER_SYSTEM_PRODUCT.Version0,
v_GS_OPERATING_SYSTEM.Caption0,
v_GS_OPERATING_SYSTEM.CSDVersion0,
v_GS_OPERATING_SYSTEM.InstallDate0
From v_R_System
LEFT JOIN v_GS_OPERATING_SYSTEM ON v_GS_OPERATING_SYSTEM.ResourceID=v_R_System.ResourceID
LEFT JOIN v_GS_COMPUTER_SYSTEM_PRODUCT ON v_GS_COMPUTER_SYSTEM_PRODUCT.ResourceID=v_R_System.ResourceID
LEFT JOIN v_GS_COMPUTER_SYSTEM ON v_GS_COMPUTER_SYSTEM.ResourceID=v_R_System.ResourceID
LEFT JOIN v_GS_SYSTEM_CONSOLE_USAGE ON v_R_System.ResourceID=v_GS_SYSTEM_CONSOLE_USAGE.ResourceID
Where v_GS_OPERATING_SYSTEM.Caption0 = 'Microsoft Windows 7 Enterprise' and v_R_System.Is_Virtual_Machine0 =0
order by v_GS_OPERATING_SYSTEM.InstallDate0 desc
Now, I want a report of count of machines built based on "v_GS_COMPUTER_SYSTEM_PRODUCT.Version0" against every month and year of "v_GS_OPERATING_SYSTEM.InstallDate0".
For example, I want to know the number of machines under a particular model (which appears under v_GS_COMPUTER_SYSTEM_PRODUCT.Version0) built in June 2014. In this fashion I want a report for every model count for every month and year available under
InstallDate0 column)
Example:
Jan 2013 -> ThinkCentre M92p -> 55
Jan 2013 -> ThinkCentre M93 -> 40
Feb 2013 -> ThinkCentre M92p -> 10
Feb 2013 -> ThinkCentre M93 -> 39
Jan 2014 -> ThinkCentre M92p -> 20
Jan 2014 -> ThinkCentre M93 -> 25
Feb 2014 -> ThinkCentre M92p -> 12
Feb 2014 -> ThinkCentre M93 -> 35
Can anyone help?

After scratching my head a bit, I came up with the below. Do you find any flaw in it?
Select
v_GS_COMPUTER_SYSTEM.Manufacturer0 as Manufacturer,
v_GS_COMPUTER_SYSTEM.Model0 as Model,
v_GS_COMPUTER_SYSTEM_PRODUCT.Version0 as "Model Info",
COUNT(*) as "No. of machines built",
CASE WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '1' THEN 'January'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '2' THEN 'February'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '3' THEN 'March'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '4' THEN 'April'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '5' THEN 'May'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '6' THEN 'June'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '7' THEN 'July'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '8' THEN 'August'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '9' THEN 'September'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '10' THEN 'October'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '11' THEN 'November'
WHEN Month(v_GS_OPERATING_SYSTEM.InstallDate0) = '12' THEN 'December'END as "Month",
YEAR(v_GS_OPERATING_SYSTEM.InstallDate0) as "Year"
From v_GS_COMPUTER_SYSTEM
LEFT JOIN v_GS_OPERATING_SYSTEM ON v_GS_OPERATING_SYSTEM.ResourceID=v_GS_COMPUTER_SYSTEM.ResourceID
LEFT JOIN v_GS_COMPUTER_SYSTEM_PRODUCT ON v_GS_COMPUTER_SYSTEM_PRODUCT.ResourceID=v_GS_COMPUTER_SYSTEM.ResourceID
Where v_GS_OPERATING_SYSTEM.Caption0 = 'Microsoft Windows 7 Enterprise' Group By v_GS_COMPUTER_SYSTEM.Manufacturer0,
v_GS_COMPUTER_SYSTEM.Model0,
v_GS_COMPUTER_SYSTEM_PRODUCT.Version0,
Month(v_GS_OPERATING_SYSTEM.InstallDate0),
YEAR(v_GS_OPERATING_SYSTEM.InstallDate0)
Order by v_GS_COMPUTER_SYSTEM_PRODUCT.Version0 desc

SQL query works in access 2000 but not through JDBC

Hello to all as my first posted message, I have a bit of a pickle on my hands. I have a query which is critical to for my application to function.
In Access 2000
SELECT sb.SeatName
FROM SeatBooking sb, Movie m, MovieSession ms, Booking b
WHERE m.MovieId = ms.MovieId
AND ms.MovieSessionId = b.MovieSessionId
AND b.BookingId = sb.BookingId
AND ms.DateOfSession = #2003/04/16 07:15:00 PM#;
This query works fine. When I insert it into my code
String query = "SELECT sb.SeatName \n" +
"FROM SeatBooking sb, Movie m, MovieSession ms, Booking b \n" +
"WHERE m.MovieId = ms.MovieId \n" +
"AND ms.MovieSessionId = b.MovieSessionId \n" +
"AND b.BookingId = sb.BookingId \n" +
"AND ms.DateOfSession = #" +
cp.getMovieSessionAt(i).getTrueTimeOfSession() + "#;";
The last line of code returns #2003/04/16 07:15:00 PM#; Which is the exact same as in Access.
To rule out some possibilities
- there are other less complicated queries which access the same database but work fine. so my code seems to be ok
- I have tried to use Format() on ms.DateOfSession to match the return value of the java statement (Which is a general date in Access in the format of 16/04/2003 7:15:00 PM)
Any suggestions would be appreciated!

Hi Simon,
On my Windows XP system with J2SE SDK version 1.4.1_02 and Micro$oft Access 2002, I have the following table:
column name    column type
id             Number
name           Text
updated        Date/TimeUsing the JDBC-ODBC bridge driver (that is part of the J2SE distribution), the following code uses the JDBC "escape" syntax -- and it works.
import java.sql.*;
public class JdbcOdbc {
public static void main(String[] args) {
    Connection dbConn = null;
    ResultSet rs = null;
    Statement stmt = null;
    String sql =
      "SELECT * FROM Table1 WHERE updated = {ts '2003-04-13 07:53:23'}";
    try {
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      dbConn = DriverManager.getConnection("jdbc:odbc:db1");
      stmt = dbConn.createStatement();
      rs = stmt.executeQuery(sql);
      if (rs.next()) {
        System.out.println("id      = " + rs.getInt(1));
        System.out.println("name    = " + rs.getString(2));
        System.out.println("updated = " + rs.getTimestamp(3));
    catch (SQLException sqlEx) {
      System.err.println("Database operation failed.");
      sqlEx.printStackTrace();
    catch (ClassNotFoundException cnfEx) {
      System.err.println("JDBC driver class not found");
      cnfEx.printStackTrace();
    finally {
      if (rs != null) {
        try {
          rs.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close result set");
          sqlEx.printStackTrace();
      if (stmt != null) {
        try {
          stmt.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close statement");
          sqlEx.printStackTrace();
      if (dbConn != null) {
        try {
          dbConn.close();
        catch (SQLException sqlEx) {
          System.err.println("ERROR: Failed to close DB connection");
          sqlEx.printStackTrace();
}More details about the JDBC escape syntax are available here:
http://java.sun.com/j2se/1.4.1/docs/guide/jdbc/getstart/statement.html#999472
Hope this helps you.
Good Luck,
Avi.

SQL Query works in Simulator VC but not in flash deploy

Hi:
This is the select that works in VC's simulator:
SELECT
"t1"."VUELO", "t1"."HORA SALIDA", "t1"."DURACION", "t1"."ORIGEN", "t1"."DESTINO", "t1"."DIAS"
FROM
"RPADMIN"."VUELOS_SEMANAL_EPN_VIRGO" "t1"
WHERE
"t1"."DIAS" LIKE '%1%'
ORDER BY "t1"."HORA SALIDA" ASC
The big problem seems to be the LIKE clause, I need to find all records that have the number one.
If I select the Simulator tab the data is bring on but If I perform a flash deploy a null message is display at app's execution. The system is well define and If I change the LIKE clause for LIKE '1' the flash app brings data (not all the records that contains the number 1).
Thanks a lot for the time on this thread.
RLS

Thanks Prakash Darj.
I read that PDF before starting the thread but I can't make it work...I read it once again and no luck...
My app is a basic one: start point with a link to a SQL statement linked to a result table
The SQL sentences that work at the simulator don't work for a flex app, Did you know the reason?
Often I get this error when deploying as flash app:
Error in executing a process for Flex compilation, Error 1103: There is no property with the name 'NEUQUEN'.
(D:\usr\sap\PD0\JC00\j2ee\cluster\server0\GUIMachine_Business_Packages\ModelName_20931\FLEX_COMPILATION_FOLEDR\AAD1W1.mxml:205)
Failed to compile AAD1W1.mxml
Is it that my VC is not working fine?
I want to know the reason for what the Simulator display the data and not the flex app...is the same app....
any Idea?
Thanks so much for the time on this thread and for your answer.
RLS

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SQL Query to show active alerts

Hi, i want to build a ASP page that shows a gridview with the current alerts in scom so we can see them clearly.
What SQL query can get me the current alerts that are showing on Monitoring - Active Alerts, where severity is Critical?
I use System Center 2012 SP1
I checked this post
http://social.technet.microsoft.com/Forums/systemcenter/en-US/898c6f62-9daf-493b-bfd9-193d1f42fc18/sql-query-to-view-current-active-alerts?forum=operationsmanagergeneral
And this page:
http://blogs.technet.com/b/kevinholman/archive/2007/10/18/useful-operations-manager-2007-sql-queries.aspx
But i can't see the correct query.
I don't want to use Powershell as i want to display it properly in a formatted gridview.
Thanks

Hi,
SELECT * FROM [OperationsManager].[dbo].[AlertView] where Severity = 2 and ResolutionState <> 255 and LanguageCode='ENU'
I want to report on all severity levels, but I'd like to see Warning instead of 1, and Critical instead of 2 and so on. Am I missing a field somewhere?
Jeffrey S. Patton Jeffrey S. Patton Systems Specialist, Enterprise Systems University of Kansas 1001 Sunnyside Ave. Lawrence, KS. 66045 (785) 864-0242 | http://patton-tech.com

Client Status Reporting

I've setup ConfigMgr Client Status Reporting and i'm getting this..
16/12/2011 14:34:16
The ConfigMgr Client Status Reporting Service could not access the site database.
Possible reasons:
1. The service could not access the ConfigMgr database using the current credentials. Ensure that the Client Status Reporting Service has "db_owner" Database Role membership on the ConfigMgr database.
2. The service could not access the ConfigMgr database. Verify that SQL server is accessible.
3. A SQL operation might have failed. Review any errors in CHService.log.
chService.log is reporting
<16/12/2011 14:34:16> Invalid SQL error - A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
The 2008 SQL server sits on same box as the SCCM site. I've tried every combination of ConfigMgr server and instance. and used local system account and a domain account that has been setup with rights as per..
http://technet.microsoft.com/en-us/library/dd334648.aspx
Any ideas greatfully recieved.

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
The error message is clear that it can’t connect to the database, I would check your connection string.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SQL query to list all collections, members, OS, SP, IP and if physical/virtual

Hi guys, I have the below query which lists all the collections and their members, however I need to expand it to also include the OS, Service Pack, IP and if it's a physical or virtual machine.
I've tried a few things but only made it worse. Is anyone able to expand the below code to include those extras??
SELECT
v_FullCollectionMembership.CollectionID AS 'CollID',
v_Collection.Name AS 'CollName',
v_FullCollectionMembership.Name AS 'SystemName'
FROM
v_FullCollectionMembership, v_Collection
WHERE v_FullCollectionMembership.CollectionID = v_Collection.CollectionID
ORDER BY
CollID ASC, SystemName ASC

Hi,
These requirements could be found in several threads or blogs. We need convert WQL to SQL, and you can involve SQL guys to integrate the statements and format the result.
How to create a all virtual machines collection.
SCCM SQL Query - IP Address
ConfigMgr Systems without Current Service Packs, and System Patch Status

Retrieve SQL Query from report without RAS.

We have a fat client application which uses Crystal Reports. We upgraded from the RDC/ActiveX viewer to the .Net SDK/.Net Viewer. One feature that we miss is that we used to read the SQL Query that a report used and wrote it to our log file. This helped with debugging and with troubleshooting problems in the field.
Since we only deploy the freely distributable Crystal Reports model and I don't think that RAS falls into this category is there a way which we can read the SQL Query from a report? If not, could you add this to a list of requested features for future versions.
I understand why you removed the ability to set the SQL query, but simply reading it does add value. Maybe it is difficult for you to return this before the report is run in which case giving us the ability to read the value after the report has been run would also be fine.
Alternatively some sort of event that is fired each time a query is executed would also be helpful as this would allow Crystal Reports clients to monitor SQL from sub-reports. You could even build a robust logging mechanism which could report additional information (i.e. number of rows returned, formula evaluations, or anything related to report execution). All of this would make troubleshooting report issues easier for those of us who use Crystal Reports.

Need to know what version of CR you are using?
You can use InProc RAS, it comes with CR and is distributed with the runtime files.
If you are using CR Basic or the version that comes with Visual Studio .NET then no this will not be added to that product line. It is basic functionality only. You will need to upgrade to a Developer version of Crystal reports to take advantage of the the RCAPI features as well as more general API's.
There is logging for our DB drivers but the log files get very large. If you use ODBC then you have the option to turn on tracing also. Using RAS you don't need to turn on logging as you can get the SQL. This won't be added either.
Thank you
Don

SCCM sql query Client status if active or not

Similar Messages

Maybe you are looking for