SCCm2012 R2 CU3 version # not showing on the site settings or in the console on the client info.

Hi, I'm installing SCCM2012 R3 and applying Cu3 on in a new environment which never had SCCM/SCCM on.  Once it was installed successfully, I realize the CU level is 3 in the registry but the "Full Version" still stayed at 1000 instead of 1401. 
the client upgrade package was applied and so was the console upgrade package.  When I open the console then look at the site version, its still at 5.00.7958.1000 instead of 5.00.7958.1401.  Also when I look at the devices client versions  are
also at 1000 instead of 1401.  Is there something wrong here?
Ri

The site version in the console will always stay at the latest major build version, which in your case is the R2 version. The client will show the right version in the console after applying the latest CU update and after that running a heartbeat discovery
(or manually trigger a data discovery cycle).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • Why is the software update not showing up in general settings?

    Why does my software update not show up in general settings?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

    The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

    reset the iphone
    1. press the wake/sleep button the top until you get the red slider
    2. Slide to power off
    3. Wait for phone to power off (you get a spinning gear icon for a while)
    4. press the wake/sleep button to turn in back on.
    if that doesn't work reset network settings
    1. Go to Settings->General->Reset->Reset Network Settings
    2. Confirm that you want to do this and the phone will restart itself
    if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

  • A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip:  So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email come

    A friend of mine sent me a voice memo via text message, it shows and plays in my iPhone as a quicktime voice clip:  So how do i import the clip to my iMac?????? When I sync my iPhone it does not show as a voice memo, I tried emailing it but the email comes through empty. Please help.

    Copy that voice memo, create a new email and paste it and send it to yourself! You can save it to your computer now and send it to someone else

  • Apple tv not showing up in devices on itunes.  Content gone from the apple tv and I'm not sure how to sync.

    Apple tv not showing up in devices on itunes.  Content gone from the apple tv and I'm not sure how to sync.

    Welcome to the Apple Community.
    Re-pair your library with iTunes.
    Settings/computers, disconnect your library, then remove the Apple TV from iTunes prefs if necessary.
    Then settings/computers/connect to iTunes.

  • What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Hi I went to an Apple store in sydney regarding a battery problem on my Iphone . All the think its the phone settings but my question is what the point of giving the facilities in phone if we are not suppose to use those?

    Hi I went to an Apple store in sydney regarding a battery problem on my Iphone . All the think its the phone settings but my question is what the point of giving the facilities in phone if we are not suppose to use those?

    Your question/request is incomprehensible.
    This much can be understood:
    You have an iPhone (model unknown)
    You have some sort of battery issue (exact kind unknown)
    You went to the Apple Store in Sydney (presumably, Australia)
    You did not achieve satisfaction on said visit.
    So, throw a shrimp on the barbie while you explain yourself, mate!

  • I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • Where does a sharepoint admin find the site settings for a mysite site collection?

    We are using sp 2010 service pack 2.
    When I look at another user's mysite, logged in as an admin (spsadmin2 is my daily admin type account), I don't seem to have access to the site settings.
    However, if I log in as the fundamental farm admin account (spfarm), I do see the site settings drop down.
    The site settings I see are not the site settings for a specific user's site collection. It is, instead, the settings for "mysites" in general.
    So, how can I look at the site settings for a specific user's site collection?
    I wanted to be able to look at their site collection recycle bin to see if something deleted was still there.
    Thank you!

    So, our mysites are associated with a web application separate from our other sharepoint sites.
    The mysites root site collection has our SharePoint admins listed as full control owners.
    The SharePoint admins also are listed as Farm admins.
    Because there is only 1 secondary site collection owner permitted, if that is the means by which someone gets access to the site collection settings and permissions, then it seems like we would have to keep changing the secondary owner quite frequently.
    You mentioned being able to set permissions on "the group" to have rights.
    Which group? The Personal Sites Owners group of our mysites web app? Or another group?
    Thank you for your help!

  • I have just uploaded my iWeb site to a FTP host and most of the site is ok however a lot of the text has gone very strange!  How can i get it to publish the same as I designed it?  Thanks in advance....

    Please help!  I have just uploaded my iweb site to a FTP Host and most of the site is ok however a lot of the text has gone wrong!  Many thanks...

    Maybe you could let me know which hosting service you are using so that I can add them to my list of those NOT recommended for iWeb users!
    I just dealt with one today who claimed the iWeb sites were incompatible and that the first line of code should be deleted from every HTML file before upload to their server.
    They didn't even offer the information that it would be a lot easier to modify the .htaccess file never mind offer to do it for a customer.
    Nobody should expect to pay for service like this and the answer is to dump them and go to a company that gives you some value and support for your money. If the ones on this page don't meet your requirements for cost and service...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... search this forum for those recommended by other users. There's a long list of them.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following: The backup

    Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
    The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
    I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.

    If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
    If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
    They might be fixable but I do not know how.

  • I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    I just published my Muse site on Adobe, and now when i do a search and get a return on the search, it repeats the site name several times. is it in the page properties?

    By search you are referring to Google search ?? or you are using any search module in your site and the keywords shows same topic multiple times on page ?
    Please elaborate more, provide site url.
    Regarding using keywords, description etc, you can add that to your page using page properties > metadata section.
    http://muse.adobe.com/strategies-for-seo.html
    Thanks,
    Sanjit

  • What are the best settings for ripping cd's in the AAC format?

    I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

    mysteryroach wrote:
    My questions are: What are the best settings for ripping cd's in the AAC format?
    It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
    Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
    Yes. Just put them in a playlist and burn.
    Does the AAC format have VBR like the MP3 format?
    Yes. You will see it as an option in the Import Settings.
    Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
    EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

  • Whenever i upload my website using ftp, the site name ends up being part of the url, Can this be fixed?

    Whenever i upload my website using ftp, the site name ends up being part of the url, Can this be fixed?

    Publishing to a local folder is shown here...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... and how to upload the files here....
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

Maybe you are looking for