Scenario Base Value + Packing + Excise + Freight + CST/VAT + Octroi + LBT

Hi SAP,
My scenario is as Base Value + Packing + Excise + Freight + CST/VAT + Octroi + LBT and Inventory cost will be Toatal value - Excise + LBT, I will provide the Example.
Base Value         100        P000
Packing                   1         ZPK3
Excise (10.3)       10.4       (BEDECSSECESS) on 101 value
Freight 10 val       10          (FRD1)
Subtotal                121.40
CST 12.5               15.18     (JVCS on 121.40) but in TAXINN procedure it will calculate on before Freight means 111.40 but client required on after addition of freight 121.40, I have assigned this Condition (JVCS) as statistical and remove From and TO steps it gives calculation 15.23 but correct calculation is 15.175 i am not understanding why it comes 15.23.
Now i have to pass this (JVCS) condition value from Taxinn procedure to ZJRM00 procedure please guide me how to pass in ZJRM00. After that i will take subtotal of this means 121.40 + 15.18 = 136.58 now i will calculate on Octroi 5.5%
Subtotal              136.58
Octroi 5.5%         7.51       (JOCM on 136.58) in ZJRM00 procedure
Subtotal2             144.09
LBT 2%                  2.88    (ZLBT on 144.09) in ZJRM00 procedure
Now Inventory cost will be
Subtotal 2 (144.09) + LBT ( 2.88) - Excise (10.40) = 136.57
Please guide me on this scenario in configuration.
Thanks
Shital Deshpande

Follow the folloing pricing procedure:
Base value          100
Packing          1
SUB total1          101
ED          10.403          BEDECSSECESS     (remove the accrual key in the conditions)
Freight          10          FRD1
SUB total2          121.403
cst          15.175375          JVCS
SUB total3          136.578375
          136.578375
octroi          7.511810625          JOCM
SUB total4          144.0901856
lbt          2.881803713          ZLBT
Total          146.9719893
Inventory          135.6

Similar Messages

Base value for excise duty

Hello All,
Base value for Excise duty and different service tax. calculated with the BASB condition type.
can we change the the base value pick up method.
Means i dont want to pick this value fron Net (gross price less discount).
I want to have this value from Calculated Net value with considering freight charge and less discount.
is it possible to change,
Abhinay Waikar.

Hi,
Assign subtotal "5" against the freight condition types in MM calculation schema and then try.

Excise Base Value & Basic Excise Rate(16%) is notpicked in RG1

Dear All,
During Excise invoice generation the value of Excise Base Value & Basic Excise Rate is not picked from billing. subsequently when i take print of RG1 in Excel format, Excise Base Value & Basic Excise Rate is also not picked it display 0.
Plz give me solution for the same.
Thanks & Regards,
Pankaj
Message was edited by:
Pankaj Mahajan

hi,
plz chek if they are apprearing in your comm. invoice, if yes then check if the excise rates are maintained for the customer, material and the plant. also check if excise registations are maintained againsf the plants and settings are defined for the same and excise grps. and excise defaults.are u getting some error/ warning messages too ?
saurabh
Message was edited by:
saurabh diwakar

No base value or Excise duty calculation coming at J1IS

I am trying to create excise invoice by T code - J1IS with Ref. doc type - OTHR,
but the system is not calculating the base value and excise duty
Please help
Regards,
Pranav

Hi,
Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
Thanks & Regards,

Editing base value or excise duty during Posting of Excise invoice

Hi,
System is getting greyed out and not allowing to change the base value or Excise duty values during posting of excise invoice, where as it is allowing during capturing the excise invoice. How to change this?
We require facility during posting. Is it possible?
Regards,
Sattuj

Hi,
Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
Thanks & Regards,

Base value in excise tab for import PO

Dear all,
We have a import purchase scenario where in the base value while capturing the excise invoice in MIGO is incorrect.
The PO value is 5000 EUR (400000 INR) with PO ex.rate as 80. The CVD caluated in PO is 540 EUR (43200 INR) which 10% of (PO value + Basic customs duty). While posting invoice in MIRO the CVD value posted was 41040 INR.
While posting GR for that particular PO the CVD value appearing is correct as per invoice which is 41040 INR but the base value is 427,938.46 INR.
And if we check the CVD value with refernce to GR base value it is 9.5% instead of 10%.
Request to kindly to let us know is where exactly the system picks the value or how does the system calculates the base value.
Secondly if we change the base value the taxes also change since the % does not match.
Would be grateful if we get some suggestion on this.
thanks and regards,

Thank AP for the reply,
But incase of import purchase we maintain it in pricing procedure.
thanks and regards,

Base value for Excise calculation

Hi SD Gurus,
Is <b>Excise duty</b> calculated on the basis of gross value of the material.?? what happens in case there is some discount given to the customer? Pleae confirm.
Does <b>assement value</b> is considered for evaluating the excise duty..??
Gupta.P

Hi Gupta,
The base value needs to be declared by the company to the excise department. Based on this value the excise duty is calculated. Irrespective the discount given the excise duty is to be computed on the base value
prasanna

Reg: Base value in Excise tab in MIGO for imports po

Hi All.
I have a doubt how is the base value claculated in excise tab while doing MIGO for imports PO does this value is picked up from the materila master ?!!!1
regards,
Abilash V

hi
for import MIGO u r entering the doc no of excise (miro doc )
using this system calculates the base value in MIGO
when u do MIGO for imports at start only system will ask u for doc no of MIRO
regards
KI

Freight calculate on Base+Packing+Excise+Freigt

Hello SAP,
We have one scenario in MM pricing procedure.
Base Value + Packing Forward + Excise(10.3) = Subtotal
Subtotal + Freight = Total
Total1 + CST(12.5%) = Total2
Total2 + Octroi = Total 3
Total3 + LBT
Example:
Base Value 100
Packing Freight 1%
Excise(10.3%) on 101 10.30
Freight (Value or %) on 111.40 10
Total 121.40 + CST(12.5%) 136.58
Total 136.58 + 5% Octroi 143.44
Total 143.44 + LBT 2% 146.28
How to map in SAP Pricing procedure.
Please suggest if any configure step by step.
Thanks
Shital

for P & F use packing condiiton category, condition class surcharge or discount
base the percentage condiiton on the gross price condition
for freight use freight or delivery type , surcharge or discount.
use 6 in subtotals
bring the taxes from the tax procedure using conditon jexs as statistical entry
calculate the nett value and base the octroi condition on that step
bring the value of octroi to the material using account key and accrue into octroi account using accrual key
add it for total in procedure, make the total statistical and base the other tax on it similar to octroi

Excise base Value

Hi all,
Currently system calculating "Base Value" of Excise Invoice based on exchange rate maintained in OB08 in case of Import PO. Our requirement is "Base Value" should be calculated on the basis of exchange rate in PO.
Thanks in advanc

Hi ,
If I change the base value of excise in MIGO(according to PO,where exchange rate is fixed) then excise BED ,AED and ECS will changed which we do not want to change.
please see base line package J83 procurement of imported materials page 15 under excise item tab ,base value is taken default by system (where ?)
kunwar

Freight & Misc amount add to the excise base value.

Hi all,
I am facing problem in pricing that when i add the some value in purchase order as freight & Insurance then it will add to my Excise base value.
How can i resolve this so that freight value not included in excise base value (Net value for excise )
Regards,
Dinesh

>
Dinesh Singhal wrote:
> Hi all,
>
> I am facing problem in pricing that when i add the some value in purchase order as freight & Insurance then it will add to my Excise base value.
>
> How can i resolve this so that freight value not included in excise base value (Net value for excise )
>
> Regards,
> Dinesh
You have to look up in CALCULATION SCHEMA, besides EXCISE BASE VALUE in FROM TO field what numbers are mentioned there, suppose freight and insurance is step 1, and besides excise from to field it is mentioned 1 to 3, you need to take step 1 out of there so in this case EXCISE BASE VALUE FROM TO field should read 2 and 3, this way freight and insurance will be excluded from calculation.
All the calculation is calculated from FROM TO field of the sub total, or net total, if you dont want certain condition to be added to the total, just remove its step from the FROM TO field.

Basic Excise Duty + VAT and Basic Excise Duty + CST in Indian Scenario

Friends,
How weu2019ll manage Basic Excise Duty + VAT and Basic Excise Duty + CST in Indian Scenario.
Thanks Expert,
Sukhjinder Singh

Hi,
In SAP B1, we dont have separate column/table to give Excise / VAT /CST as input. Hence, in SAP B1 we have to give this input of ExciseVAT or ExciseCST as combination.
This combination can be prepared using following path---
Administration--->setup>financial-->Tax
Please reply incase of any problem.
Regards,
Abhishek

FREIGHT AFTER ED AND BEFORE TAX (CST/VAT)

Hi Friends,
We need the freight to be calculated after Excise duty and before Tax ( CST/VAT). For example
Basic Value = 100
ED 10% = 10
ECS 2% = .2
SECS 1% = .1
10.3
Freight = 10
120.3
CST 3% = 3.60
Total Value = 123.90
In our case Freight is calculation after TAX. But we need to calculation of CST/VAT includes freight.
Kindly suggest how to make changes in pricing procedure.
I created one condition in pricing procedure for freight, but the same is not transferring to tax procedure for calculation. I also created one condition in tax procedure. But value is not passing to tax procedure.
Knidly give the solution at the earliest.
Regards,
Shital Deshpande

Check in tax procedure(OBQ3) whether freight condition(Z*) is included after ed subtotal ?
Whether you maintained condition record(FV11) for lumpsum Z* freight condition ?

CIN: Alteration of base value for CST in TAXINN

Hi,
In our business process there is a requirement that CST should not be calculated only on Basic Price + Excise Duties (BEDEcessSEcess) rather base value for CST should be Basic Price + Excise Duties (BEDEcessSEcess) + 2 Additional Surcharges as mentioned below:
Basic Price     100.00
BED (10%)     10.00
Ecess (2%)     0.20
SEcess (1%) 0.10
Additional Surcharge1     4.00
Additional Surcharge2     6.00
Base for CST 120.30 (100100.20.14+6)
CST (2%)     2.41 (2% of 120.30)
Total Value     122.71
The tax procedure being used is TAXINN
Is there any standard routine or subtotal available so that by using this in PO Calculation Schema and TAXINN the base value of CST can be modified as desired?
Please provide some useful ideas.
Thanks in advance
Edited by: Sapdear on Aug 29, 2011 8:22 AM

Hi,
The additional surcharges are condition types in the calculation schema of PO whereas CST is being calculated in Tax Procedure TAXINN so how "From" and "To" functionality can work. The surcharges are getting calculated in PO Pricing and CST in tax procedure TAXINN (both at different places)
We want to use a tax code (BED10%Ecess2%SEcess1%+CST2%) to calculate Excise Duties and CST by additional surcharges taking into account.
Can any one provide some idea to resolve this issue?
Thanks in advance

Excise base value is not changing in MIGO excise tab for Import PO scenari

Dear Gururs,
We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. we are not creating the planned cost mIRO directly we do the GRN.
Please suggest a solution.
Thanks
Shital

Hello Shital ,
You are using the India Scenario right?
The issue can be because you have not assigned a zero tax code to the line item. For India please make the tax code field in PO as mandatory so that the user does not save the PO without atleast a zero tax code.
Maintain the tax code & proceed. You will see the tab in MIGO.
Regards
Plauto

Scenario Base Value + Packing + Excise + Freight + CST/VAT + Octroi + LBT

Similar Messages

Maybe you are looking for