Scheduling a report in the browser

http://hbc-maroon.heartlandbc.org/reports/rwservlet?userid=HBC_QA/[email protected]&SCHEDULE=daily_from_04:00_tomorrow&subject="Four Seasons Rpt "&destype=mail&FROM=[email protected]&desname=[email protected]&desformat=PDF&ENVID=QA&report=r_four_seasons_email
I want to know how to schedule one specific report to run everyday between Monday and Saturday, every 10 minutes between 7am-8pm? How to add the schedule parameter?

hi,
im getting this log:
10.07.2008 08:41:44 Job started                                                             00           516          S
10.07.2008 08:41:44 Step 001 started (program ZBWDATA_BW, variant , user ID CA.LOKESH)      00           550          S
10.07.2008 08:42:14 ABAP/4 processor: SPOOL_INTERNAL_ERROR                                  00           671          A
10.07.2008 08:42:14 Job cancelled                                                           00           518          A

Similar Messages

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

If Two Users try to schedule a report at the same time does that lead to a Deadlock?

When Two users trying to access the same server and need to access the report for scheduling at the same time, does that lead to Deadlock Situation?
What are the Odd's in such scenarios?
Please help me understanding.
Regards,
Shiva

When two users are say trying to schedule the same report at the same time - the relevant Job server has default capacity of running 5 concurrent jobs at a time (this value can be increased) - that means, it can run 5 schedules at the same time.
Let's say now two users have scheduled 6 reports - now the 5 reports that were scheduled will be in the "running" state but the server has only 5 concurrent job capacity so the 6th report schedule will stay "pending" until any one of the existing jobs are completed, and then the 6th report will start "running".
There is nothing called deadlock while scheduling. While viewing the reports, there are enough resources available in the BO system to make the report available for various users at the same time.
Thank you, Rahul

Mozilla firefox won't open it comes up with mozilla crash reporter before the browser opens

I cannot open the browser at all everytime I try and open it it comes up with crash reporter and then the browser doesn't open at all. I cannot open it in safe mode either as when I try and press shift while opening it it doesn't even come up with an option to open it in safe mode. I cannot troubleshoot it if it is not opening either which is frustrating. I have tried uninstalling and reinstalling but still no use.

We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

How to open report in the browser from PL/SQL procedure

Hi,
I need to call the report (with destype = SCREEN) from the PL/SQL procedure and display in the browser.
For Example: when I call P_call_report procedure in my Forms6i button or at sql*plus, the report output PDF/HTML should open in the Browser window.
Iam Using IE, report6i, forms 6i, Oracle 8.1.7, Windows OS
I tried using UTL_HTTP(' ') in a procedure. But when I execute the procedure at sql*plus it says Pl/sql procedure completed successfully message without opening report output in the browser window. If I copy the same url and paste it in the browser, it works.
Please let me know if there is any solution.
thanks alot.

I guess event driven publishing may work. But Iam not sure about the opening of the browser from inside the procedure.

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

Scheduling 100 Reports via the Precalculation server.

Hi All
We are on BI7 and have a precalculation server.
I need to schedule 100 reports once a month to suppliers, my question is is it best to attach it onto a Process Chain or is it best to schedule them independently.
Thanks in advance.
Regards...BK

You could also use the DataChange event Process type in a process chain. You add the DataChange process, set a variant value, then schedule your reports to be triggered by the DataChange event.
If you are scheduling 100 reports, you should also know how many precalc servers you have setup in your environment, and know how large the precalc queue is.
SAP doc on precacl server has some sizing info to suggest how many precalc server you might need. Also review the RSADMIN parameter that can be used to adjust the precalc servers queue size.

Help.... trying to set the browser title for reports called from 9i form

hello all
I am attempting to call a 9i report from an oracle 9i form .I am using the following code
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_type,CACHE);
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_DESFORMAT,pdf);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'sandy4');
v_rep := RUN_REPORT_OBJECT(repid,p1_id);
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://----.--------.com:8888/reports/rwservlet/getjobid'|| substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=sandy4,'_blank');
.. and so on
The reports RUNS FINE AND POPS UP AS A NEAT PDF internet explorer page !!!
I WAS WONDERING IF THERE IS ANYWAY TO SET THE BROWSER TITLE OF THIS REPORT THAT POPS UP..
DO I HAVE TO CHANGE SOME PROPERTY AT THE REPORT END
OR CAN I SET IT DYNAMICALLY BY PASSING AS A PARAMETER
FROM MY FORM
I HAVE SEARCHED EVERYWHERE FOR THIS
PL HELP
I WILL REALLY APPRECIATE IT IF SOMONE CUD HELP ME WITH
THIS
THANK YOU
SANDY

Hi,
It is possible to set the Document title for PDF output. Open the Reports Property Inspector, under PDF Document Taxonomy, you can set the Document title. But this does not show up in the browser when you open the document.
thanks,
Senthil

Display the reports in web browser?

I need advise.. Here is my requirements.
we are using Oracle9i database. We have data warehouse Schema. We wanted to display some of the reports in the browser. What are the possible solutions to display the reports in web browser with out using any reporting tools(cognos, business objects etc).
Thanks

Well your requirement is a little bit odd, displaying data in database without using tools or application. What's form of these reports you are talking about? Are they just bunch of queries?
If you don't want to use heavy duty software like cognos or business objects, then consider use Oracle Application Express APEX
http://www.oracle.com/technology/products/database/application_express/index.html
by the way cognos and business objects are OLAP tools, does that mean your reports are OLAP report?

BI 4.0 Launch Pad will Freeze When Attempting to Schedule a Report

I recently set up BI 4.0 Edge series onto my server running MicroSoft server 2008 R2. The install completed without error so I began implementing 'Best Practice' Crystal Reports. When attempting to schedule these reports within the BI 4.0 launch pad I ran into an issue.
After clicking 'Schedule' the IE browser freezes with the schedule options available to be seen but not interact with and the loading pinwheel frozen in the center of the screen.
I am running IE9 but I have run both IE8 and IE9 on other systems without fail so I don't think that's the issue. I've also tried resizing the APS to allow more RAM to the platform processes as well as split the services into separate servers all without success.
The browser also freezes when I attempt to click the 'Preferences' button on the launch pad home page, but I can open the Web Intelligence Application with no problems.
This is a particularly frustrating issue since I can navigate within the CMC with excellent response time from the system. The rest of the launch pad is as reponsive as the CMC. I can navigate in and out of folders fine, but when I try any command by right-clicking on a report
If anyone has any suggestions on what could be causing the browser to freeze during these transactions I would greatly appreciate it. Iu2019ve tried to run a Repair on the Edge series application and I would like to avoid a complete re-install.

Only IE8 is supported, how about another browser like Firefox on same machine. No need to re-install, you can try to undeploy -> redeploy the web app using WDeploy but it seems to be machine specific.

Reports Server/running reports on the web.

I am trying to configure my web server to run reports on the web. I have followed the instructions provided by Oracle, but some is not clear. When i try to run report on the browser, i get the following error:
CGI Error
The specified CGI application misbehaved by not returning a complete set of HTTP headers. The headers it did return are:
Oracle documentaion say the following about the steps to configure the web server:
1-Start your Web server by entering the following:
2-Start your browser.
3-Create a listener.
4-Configure your Web server mapping and note the physical and virtual directories. For example:
I have done all the steps above except creating a listener. The documentation doesnt explain that step at all.
I have created a cgi-bin directory and made it excetable and copied the rwcgi60.exe from reports server machine to the web server machine. I also copied the TNSNAMES entry for the web server from the reports server machine to the web server machine.
Here is the command i use(just trying to make sure that web CGI is responding, but it doesnt work)
http://web_server/scm/cgi-bin/rwcgi60.exe
Other question: On the server machine, i have 3 oracle directories: ORA81, ISUITES, 806, which one should be the home directory for the reports to work on the web??
I am using oracle 8.1.7 with 9iAS release 1.
Thanks

Please note that our CGI servlet is only used as a migration point for
people with legacy CGI. It is not intended to support people with new
development to -- we encourage you to use JSP and servlets.
Thanks,
Michael
Savitha wrote:
>
Thanks Wei,
Savitha
"Wei Guan" <[email protected]> wrote in message
news:8itate$332$[email protected]..
Yes, WebLogic has CGIServlet to handle CGI, refer to document for details.
Cheers - Wei
Savitha <[email protected]> wrote in message
news:8isq8i$ocn$[email protected]..
Does Web logic Support CGI ?
Need to connect the Web Server with the Oracle Reports Server running
on
a
separate machine.
Which is to be referred to as CGI_Virtual Directory?
Thanks ,
Savitha
Thanks,
Michael
-- BEA WebLogic is hiring!
Check our website: http://www.bea.com/

Scheduled discoverer report giving error

Hi All,
I am facing a problem where in I have scheduled a report. The table populated after scheduling is fetching data but when we try to open the scheduled report it gives an error ' Inconsistent datatype expected number got date '.
We are using a function in the report which fetches a date colomn and return type of that date used is Varchar(2). We also tried using the return type as date but same error comes.
An early response will be highly appriciated.
Regards,
Shruti

i have similar problem - i have some calculated columns in the report.....when i schedule it the values in one column are getting populated in the other column.....if i run the report manually i did not have any problem.
i had a small calculation for a column (date)....user wanted to see it in a different format in the report.....
already that column was existing in the folder but in a different format......but upon users request i just put up a small calculation for that...........
i scheduled the report and ironically only that calculated column (date) was getting populated wrong........so i pulled the normal date column from the folder..........and now i have two columns for date (1-calculated, 2 - from folder)..........1st column is anyhow getting populated wrong....but the 2nd column was pretty good........
many of you might know....."*IDLE MAN'S BRAIN IS A DEVILS WORKSHOP*"....
i formatted the 1st column with white color and kept the background color also as white......so that when the user opens the scheduled report.....he will see only a blank white column for the 1st column............i told him to export it to excel and then delete that blank column and save your excel output..
i know this is the worst solution or idea anyone can get.........but i had to do it.

How to schedule a report

Hi,
anyone can help me what transaction to be used and how to schedule a report program.
the exact requiremnet is like i have a report program which is to be scheduled at a partticular time to be run how can i do it

Hi,
Goto
SM36 tcode
and provide
Job Name , Job class
( depends on the priority whther A,B, or C).
and then choose
start condition
on the application tool bar
and then choose
Date/Time
button in the new window appeared.
Provide Schedule start data and time.
if you want to execute periodically then select
Periodic job
check box..
then SAVE button to be pressed to save the these settings.
then choose
STEP button
on the application toolbar and provide
Program name and variant name and lang ..
Press the SAVE button.
so program is scheduled to runn in BG mode at the specified time.
but while giving time we have to give server time not the system time
Thanks
Parvathi

Running a report into the 9i Report Server

We were using the 6i Reports Server.
We now are trying to use the 9i version.
Also from Windows, we decided to use Linux ES 3.0..
in the windows version of the Reports Server there was
an exe file RWCLI60.EXE, which we called with a parameter
file, and it produced our report on the browser, in
an HTML format or PDF.
How can we present a report on the Web with the 9i
Report Server ? Does 6i and 9i use the same process
on the Report showing ?
What is the $ORACLE_HOME/lib/librw90.so ?
is it the "executable" in Linux that does this ?
Or the process is completely different?
Excuse my long question, its just that im new in the
9i, and have many worries if its compatible with
our old report-showing mechanism..
Pls help, regards,
John,
Greece

Ji J g a,
I need some help with reports. I am new. Could you tell how can I call reports from forms? What do I need to provide for 'myrepserver' parameter? This is an urgent requirement for me. It doesn't look like any one is reponding on this forum. Please help. Thanks,
L

Scheduling Crystal Report in BO Enterprise -- running Failed with an error

Hi all,
       I have scheduled a crystal reprt which is published in BO Enterprise. I have scheduled such that it should run right now. when i choose schedule, in the History screen of that particular Report Document, it is showing the status as Failed.
       I cecked the Instance Details of that particular instance in History Screen, it is giving me this error message:
" Error in File ~tmp1f905fddf0fb274.rpt: Unable to connect: incorrect log on parameters ".
       I have choose ' set to null ' to all parameters in the Parameteers Screnn while scheduling, as all the parameters are optional.
Please suggest how to go ahead with this error. I am new to BO Enterprise, I have to schedule crystal report in the Enterprise.
Thanks in advance !

hey i got this error resolved by giving server details in Data Base Configuration screen.

Scheduling a report in the browser

Similar Messages

Maybe you are looking for