Scheduling SSIS packages through SQL Server Agent

Hello All! I have an SSIS question for BPC 7.5 installations across multiple servers. I have been rebuilding all my DTS packages over to SSIS and trying to learn this more dynamic environment. Currently I have saved a copy of all my rebuilt packages from BIDS (on web server) to the MSDB located on the SQL server. I can manually run packages from Integration Services and load data successfully. When I try to schedule packages based on the packages stored in MSDB, I get failures. The errors initially suggested I was passing over a NULL password, so I adjusted the protection level of the package to ServerStorage, as opposed to the default setting.
Now I have the following error when I schedule and run it:
Message
Executed as user: AMERICREDIT\svcbpc_ssis_dev. Microsoft (R) SQL Server Execute Package Utility Version 10.0.2531.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:00 AM Error: 2011-02-28 11:48:02.05 Code: 0xC0010018 Source: Convert Task 2008 Description: Failed to load task "Convert Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISConvert, OSoftTaskConvert2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.06 Code: 0xC0010018 Source: DumpLoad Task 2008 Description: Failed to load task "DumpLoad Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISTaskDumpLoad, OSoftTaskDumpLoad2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0010026 Source: Convert Task 2008 Description: The task has failed to load. The contact information for this task is "". End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0024107 Source: Convert Task 2008 Description: There were errors during task validation. End Error Error: 2011-02-28 11:48:02.13 Code: 0xC0010025 Source: Z6_VW_STAT_APLN_CURR Description: The package cannot execute because it contains tasks that failed to load. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:48:00 AM Finished: 11:48:02 AM Elapsed: 1.406 seconds. The package execution failed. The step failed.
It appears I cannot execute any of the BPC custom tasks in the SSIS packages. Any recommendations?

Thanks, James, your point is well taken. Originally we were importing packages into the file system, but had the same results when scheduling.
Below is the message received when I schedule a package located in the stored package file system from my web server:
Executed as user: AMERICREDIT\svcbpc_ssis_dev. Microsoft (R) SQL Server Execute Package Utility Version 10.0.2531.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:36:00 AM Error: 2011-03-01 10:36:02.56 Code: 0xC0010018 Source: Convert Task 2008 Description: Failed to load task "Convert Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISConvert, OSoftTaskConvert2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.58 Code: 0xC0010018 Source: DumpLoad Task 2008 Description: Failed to load task "DumpLoad Task 2008", type "OSoft.Services.Application.DataMgr.Task.SSISTaskDumpLoad, OSoftTaskDumpLoad2008, Version=7.0.112.0, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648". The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0010026 Source: Convert Task 2008 Description: The task has failed to load. The contact information for this task is "". End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0024107 Source: Convert Task 2008 Description: There were errors during task validation. End Error Error: 2011-03-01 10:36:02.62 Code: 0xC0010025 Source: Z6_VW_STAT_APLN_CURR Description: The package cannot execute because it contains tasks that failed to load. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:36:00 AM Finished: 10:36:02 AM Elapsed: 1.954 seconds. The package execution failed. The step failed.
Could this be a security thing? If so, what would my security need to be set up from the package level?

Similar Messages

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

Getting an error running an SSIS package from SQL server agent

This is the first time I'm running an SSIS package in SQL server agent.
I'm running a SQL server agent job and getting this error message:
Am I using the correct options? (options list below)
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 1:42:00 PM Error: 2014-04-17
13:42:01.01     Code: 0xC0011007     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-17 13:42:01.02     Code: 0xC0011002     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Failed
to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly
into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx"
because of error 0xC0011002. Description: Failed to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a
package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source:
{B72BF421-785A-44EC-9570-D2A40B046CA7} Started: 1:42:00 PM Finished: 1:42:01 PM Elapsed: 0.047 seconds. The package could not be found. The step failed.
Here are the options I'm using:
package source - file system
data source destination = my SQL server db
execution option - use 32 bit runtime
command line entry:
- /FILE "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" /CONNECTION DestinationConnectionOLEDB;"\"Data Source=esxdspr-sql01.sitex.com;Initial Catalog=SuesTbls;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=false;\""
/CONNECTION SourceConnectionFlatFile;"\\sitex.com\dfs\Production\SFTPData\LPSEFTProcess\FromAADFS\Rpt_Nbr_Rollsperbatch_20140331_20_0.txt"
/X86 /CHECKPOINTING OFF /REPORTING E
I checked the filename so it must be the XML format it's complaining about.

Thank you, pituach.
I tried running the package using just my c drive without partition, C:\Nbr_Rolls.dtsx, but still getting the same
error. I do not see any option on this site to post my package. I know it's not the path that's the issue. Our support desk already fixed that because I was getting a different message before.
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 11:23:00 AM Error: 2014-04-18
11:23:00.44     Code: 0xC0011007     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-18 11:23:00.45     Code: 0xC0011002     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Nbr_Rolls.dtsx" because of error 0xC0011002. Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source: {2BEE62EB-DD08-4867-9F5C-660167964650} Started: 11:23:00 AM Finished: 11:23:00 AM
Elapsed: 0.125 seconds. The package could not be found. The step failed.

Executing SSIS packages through SQL Server Jobs.

Hi,
I have an SSIS package which generates xml and text files and ftps it to an ftp site. When i run the package from BIDS it works successfully but when i run it from a job it fails. My SSIS package connects to DB server A and though i'm creating a job on DB
server A but my folder structure and the package resides in server B from where i'm connecting to DB server A through Management Studio. I'm using File system in SQL server Agent Job to call the package. When i execute the job i get following error:
Executed as user: I\A. ...er Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:08:05 PM Error: 2011-06-21 17:08:05.11
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2011-06-21 17:08:05.11 Description:
Failed to open package file "E:\P\H\R\Tools\R\R\R.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the
result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has . The step failed.
Could you please tell me where am i going wrong?
Thanks,
Deepti
Deepti

Hi Christa Kurschat,
I'm running the job under proxy account. And that account has sysadmin permissions.
I used following script to create proxy account and run my package under that account:
I. Create job executor account
Highlight Security->New Login, say to make login as devlogin, type your password, default database can be your target database.
Server roles: check �sysadmin�
User mapping: your target database
Msdb database: you make sure to include
SQLAgentUserRole, SQLAgentReaderRole, SQLAgentOperatorRole
Then click OK
II. Create SQL proxy account and associate proxy account with job executor account
Here is the code and run it the query window.
Use master
CREATE CREDENTIAL [MyCredential] WITH IDENTITY = 'yourdomain\myWindowAccount', secret = 'WindowLoginPassword'
Use msdb
Sp_add_proxy @proxy_name='MyProxy', @credential_name='MyCredential'
Sp_grant_login_to_proxy @login_name=' devlogin', @proxy_name='MyProxy'
Sp_grant_proxy_to_subsystem @proxy_name='MyProxy', @subsystem_name='SSIS'
III. Create SSIS package
In MS SQL Server Business Intelligence Development Studio, you use job executor account devlogin to create the SSIS package (DTS) and make sure you can execute this package
in SQL Server Business Intelligence Development Studio. Compile/build this package.
IV. Create the job, schedule the job and run the job
In SQL Server Management Studio, highlight SQL Server Agent -> Start. Highlight Job ->New Job�, name it , myJob.
Under Steps, New Step, name it, Step1,
Type: SQL Server Integration Service Package
Run as: myProxy
Package source: File System
Browse to select your package file xxx.dtsx
Click Ok
Schedule your job and enable it
I followed these steps.
Thanks,
Deepti
Deepti

Memory error when executing package through SQL Server Agent.

Hi!!
I have a problem with a package (SSIS) when run on SQL Server Agent.
The job is configured
with the proxy and the account has the
required privileges. Runs perfectly
if the job runs manually, but if I let it
run on schedule I get a memory error.
Also if I run the
package through DTExec.exe or VS2008,
everything runs smoothly.
I am using SQL2008R2.
If someone has something similar happened
and have found how to fix it please i need
to know how.
Thank you.

This is most likely your issue:
http://support.microsoft.com/kb/824422

Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

Situation:
SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
Windows 7 - 64 bit.
The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
It uses 3 package variables:
*) SQLCommand (String) to specify the SQL Statement to be executed by the package
Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
Value: f:\Output Data.xls
*) EXCELOutputFIle (String) to specify path and filename of the Excel output file
Property path: \Package.Variables[User::SQLCommand].Properties[Value]
Value: select * from CartOrder
*) VarObjectDataSet (Object) to hold the data returned by SQL Server)
Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
Value: System.Object
It consists out of 2 components:
*) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
*) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only. This makes me wonder if it is uberhaupt possible to set the value of a package variable
of type Object.
Can anybody help me on this please ?
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 6:40:20 PM DTExec: Could
not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object. Started: 6:40:20 PM Finished: 6:40:21 PM Elapsed: 0.281 seconds. The package execution failed. The step failed.
Thank you very much in advance
Jurgen

Hi Visakh,
thank you for your reply.
So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
first question about the object type package variable.
Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
Thx in advance
Jurgen
Yes exactly
You need to set values only forthem which needs to be controlled from outside the package
Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Not able to run the SSIS package in SQL Server Agent Job in SQL 2012

Hi,
I scheduled a job (SQL SERVER AGENT) which will call my SSIS package. This package will execute 5 packages in loop.
When I execute this job I am getting error as below
============================================================
Started  : 12:30:19 PM
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220EC
Source  : Execute Package Task
Description : Error 0x80070005. Failed to create an instance of empty child package.
    The Distributed Component Object Model (DCOM) configuration or the installation of SQL Server Integration Services,
    may be corrupted on your machine. End Error
Error  : 2014-01-23 12:30:20.37
Code  : 0xC00220DE
Source  : Execute Package Task
Description : Error 0x80070005 while loading package file "D:\SSIS\RetailMobileApp\Staging_Pkg\stg_Category_Master.dtsx". Access is denied.End Error
DTExec  : The package execution returned DTSER_FAILURE (1).
Started  : 12:30:19 PM
Finished : 12:30:20 PM
Elapsed  : 1.123 seconds.
The package execution failed.
The step failed.
============================================================
In the STEPS I have selected as follows:
Type : SQL Server Integration Services Package
Run as: SQL Server Agent Service Account
Package Source: File System
What config I need to check here ? This job is not able to access the package stored in the folder.
Sridhar

Thanks for your reply. I had created credentials and used this while creating the Proxy account. With the Proxy account I am able to execute the Job Successfully. Concern here is I used my NT account to create this Proxy. Suppose If I left from the
current project if some one is coming to this project later they need to change the credential with their NT account and run the JOB? Is this right way or we an create any other account in common? If so how?
Sridhar

Run the SSIS Package using sql server Agent--Memory utilization Problem

Hi,
I have Created one SSIS Package it was working fine in BIDS but in SQL Server Agent it takes all the server memory and server gets very slow now.
in that ssis package i am using merge join,sorting tasks.Can you please suggest me how to handle in the memory usage for this..pls refer the below screen

Hi aravindhrm,
You can enable BufferSizeTuning logging event on the Data Flow Task to get how many rows in buffer. Or you can use Performance Counter to obtain more details about the buffers.
http://microsoft-ssis.blogspot.com/2013/04/performance-best-practice-more-rows-per.html
http://www.sql-server-performance.com/2009/ssis-an-inside-view-part-3/
Then, you can tweak the DefaultBufferMaxRows and DefaultBufferMaxSize size settings.
Besides, you can also go through the blog mentioned by Visakh and try suggestions such as increase OS pagefile size.
Regards,
Mike Yin
TechNet Community Support

Running multiple SSIS packages using SQL Server Agent question.

I have a multitude of SSIS packages I want to run using SQL Server Agent. What would the best practice be for running these jobs using SQL Server Agent? One job per package or running all pakages from one job? If you have an answer can
you explain the technical reasoning behind your answer? Thanks in advance.
Stan Benner

Hi, maybe a bit more analysis will give a better answer
Do all the packages have to run in sequence? (if yes, single job better)
Can the list of packages to be executed be grouped by dependency (ex package 1,2 and 5 must run in sequence and can be executed by one job, while package 3,4 are not dependent on package 1,2 and 5 can be run by a separate job).
Can any jobs be run in parallel?
How often will the package execution sequence change?
How will you deploy your packages and job? (the more jobs to create the more install script needed and upgrade scenarios become messy).
My personal preference:
I create ONE ssis package which is executed by ONE sql agent job. lets call this 'PackageExecutionWrapper.dtsx'
PackageExectionWrapper then contains multiple 'Execute Package' tasks for the packages you want to execute.
In the package you can apply any package execution rules - which packages have to run after the other, which packages can run concurrently, which packages should only run if previous succeeded.
If you need to change the sequence, simple, just update the PackageExecutionWrapper package.

Fetch SSIS error through SQL Server Agent JOB

Hi,
I am trying to fetch eventmessages from catalog.eventmessages view in SSISDB inside a sql job which executes a package. This utility is supposed to send an email with the description of failure reason and step whenever the JOB fails. But I could not find
a way to reference a package in SSISDB with the corresponding JOB through SQL query.
sysjobsteps stores the step info, but how can I refer to the SSIS package using the info from this table or any other table. Please provide an expert view for this problem.
Regards
Mohit

sysjobsteps stores the step info, but how can I refer to the SSIS package using the info from this
table or any other table
Can you try like this?
SELECT e.package_name,e.message
FROM msdb.dbo.sysjobsteps js
inner join SSISDB.catalog.event_messages e
On js.command collate database_default like'%\' + e.package_name collate database_default + '%'
--WHERE e.event_name ='OnError'
Uncomment the WHERE clause if you want to specifically look for errors
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

SSIS running through SQL Server agent Job Fails --SQL Server 2012

Hi All,
I am getting the below error.
Executed as user: sak\thiru. ...ion 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 3:31:17 PM Error: 2014-03-07 15:32:22.46 Code: 0xC0202009 Source: CommonDataSource
Connection manager "TESTDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0"
Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "A network-related or instance-specific
error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ". End Error Error:
2014-03-07 15:32:43.58
The package execution fa... The step failed.
I checked namedpipes, ports,services, SqlBrowser all are running fine.
share your views.
Thanks
Thiru
Thiru

Hi Thiru,
The error messages are rather general and the issue may occur due to various causes. You can check the “Connect Time” setting of the Connection Manager "TESTDB", and increase its timeout value.
If the issue persists, maybe it occurs because the Windows Firewall or certain anti-virus software blocks the RPC dynamic range of TCP Ports between SQL Server and Domain Controllers. In this case, temporarily disable third party anti-virus software, or
configure RPC dynamic port allocation to work with firewalls referring to the following KB article
http://support.microsoft.com/kb/154596.
In addition, the issue may be related to the SQL Server that the OLE DB Source adapter connects to. You can check the SQL Server log to see if any error occurs at that time.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Getting error while trying to upload the data in excel from SSIS package through sql agent job

We are getting below errors.
Error:
The Microsoft Jet database engine cannot open the file '\\serversdev\Documents\QC Files\Prod.xls'. It is already opened exclusively by another
user, or you need permission to view its data.
Please suggest ASAP
Regards,
Ramu
Ramu Gade

Hi Dikshan Gade,
According to your description, you want to upload data from excel to database, when you call ssis package through SQL Server Agent job, you got the error message.
To troubleshoot the problem, please refer to the following steps:
Validate that the account has permissions on the file and the folder.
Verify that the file and the data source name (DSN) are not marked as Exclusive.
Make sure SQL Server Agent Services service account has the permission to access the database.
We can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues. For more information about the issue, please refer to
the following KB article:
http://support.microsoft.com/kb/306269
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

SSIS package give an error if execute through SQL server agent

I have created a SSIS package in BIDS 2012. If i execute this package through sql server agent it gives the below error:
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:19:47 AM Error: 2015-01-20
11:19:47.83 Code: 0xC0016016 Source: Sub_Hadoop_aggregation Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.".
You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2015-01-20 11:19:47.94 Code: 0xC0016016 Source:
Sub_Hadoop_aggregation Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error
occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2015-01-20 11:19:48.04 Code: 0xC0016016 Source: Sub_Hadoop_aggregation Description: Failed to
decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct
key is available. End Error Error: 2015-01-20 11:19:48.92 Code: 0xC00291EC Source: alter_keys Execute SQL Task Description: Failed to acquire connection "mstr_warehouse". Connection may not be
configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:19:47 AM Finished: 11:19:48 AM Elapsed: 1.42 seconds.
The package execution failed. The step failed.
so i have change some properties in our package like protectionlevel change from encrypted to dontsavesensitive. After that i have created configuration file for the package and use that configuration file. It executes the package through sql server agent
smoothly.
Thanks
Azhar Khan

Hi selfdestruct80,
According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
According to my knowledge, the package may not run in the following scenarios:
The current user cannot decrypt secrets from the package.
A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
A task or a connection manager requires that the current user account has correct permissions.
According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
/FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Scheduling SSIS packages through SQL Server Agent

Similar Messages

Maybe you are looking for