Schema configuration

Hi
As far as I know schema is just a layout of database and one DB can have as many schemas as needed.
so, can there be more than one users for a schema?
and can one user be owner of many schemas??
Thanks!!

Hi Mohit,
A user and a schema are pretty much the same. For each user you can give privileges to use objects owned by other users/schemas.
This means that a user can access multiple schemas depending on the privileges given.
Thanks
Sander

Similar Messages

Finding exception with the read-write-backing-map-scheme configuration.

Finding exception with the <read-write-backing-map-scheme> configuration, that is setup against a simple database cache store implementation. The class SimpleCacheEventStoreImpl implements CacheStore interface.
Exception in thread "main" java.lang.UnsupportedOperationException: configureCache: read-write-backing-map-scheme
     at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:995)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:277)
     at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:689)
     at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:667)
     at Sample.SimpleEventStoreConsumer.main(SimpleEventStoreConsumer.java:10)
The cache store is interfaced to the program SimpleEventStoreConsumer(where I have a put and get operation) through the following cache configuration descriptor. On running the SimpleEventStoreConsumer, the exception happens on trying to get the Named cache from the cache factory
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>Evt*</cache-name>
               <scheme-name>SampleDatabaseScheme</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <read-write-backing-map-scheme>
               <scheme-name>SampleDatabaseScheme</scheme-name>
               <internal-cache-scheme>
                    <local-scheme>
                         <scheme-ref>SampleMemoryScheme</scheme-ref>
                    </local-scheme>
               </internal-cache-scheme>
               <cachestore-scheme>
                    <class-scheme>
                         <class-name>com.emc.srm.cachestore.SimpleCacheEventStoreImpl</class-name>
                         <init-params>
                              <init-param>
                                   <param-type>java.lang.String</param-type>
                                   <param-value>{cache-name}</param-value>
                              </init-param>
                         </init-params>
                    </class-scheme>
               </cachestore-scheme>
          </read-write-backing-map-scheme>
          <local-scheme>
               <scheme-name>SampleMemoryScheme</scheme-name>
          </local-scheme>
     </caching-schemes>
</cache-config>

you are missing <backing-map-scheme>. Do like following:
<caching-schemes>
          <distributed-scheme>
               <scheme-name>distributed-scheme</scheme-name>
               <service-name>DistributedQueryCache</service-name>
               <backing-map-scheme>
                    <read-write-backing-map-scheme>
                         <scheme-ref>rw-bm</scheme-ref>
                    </read-write-backing-map-scheme>
               </backing-map-scheme>
<autostart>true</autostart>
          </distributed-scheme>
          <read-write-backing-map-scheme>
               <scheme-name>rw-bm</scheme-name>
<internal-cache-scheme>
     <local-scheme>
                    </local-scheme>
               </internal-cache-scheme>
          </read-write-backing-map-scheme>
</caching-schemes>

Multi vlaued attribute in IDM Schema Configuration

The IdM docs - states
Optionally, an IDMAttributeConfiguration
can specify whether the attribute is multivalued,
and can provide a display name (currently not used),
and a description.http://docs.sun.com/source/820-2961/A_edit_configObjects.html#wp19336
Does anyone have any idea ... how to specify an multi valued attribute in the IDM Schema Configuration ?
Or how can i have the email attribute configured as multi-valued.

you need to have multi='true' in the resource configuration. Something like this:
<AccountAttributeType id='11' name='changedate' syntax='string' mapName='changedate' mapType='string' multi='true'/>
I don't think you can set that through the gui; you have to edit the xml manually
see the post http://forums.sun.com/thread.jspa?forumID=764&threadID=5370337 for more details

MDS Schema Configuration Failue during OEM installation

During the OEM installation the set-up stops at MDS Schema Configuration. I see the following exception in the log files :-(
emmdscreate_2010_08_25_AD_23_11_09_IST.log*
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Oracle Home is C:\Oracle\MiddlewareEM\oms11g
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_HOME to C:\Oracle\MiddlewareEM\oms11g
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_HOME is C:\Oracle\MiddlewareEM\oms11g
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set SCRIPT_HOME to C:\Oracle\MiddlewareEM\oms11g\rcu\integration
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : SCRIPT_HOME is C:\Oracle\MiddlewareEM\oms11g\rcu\integration
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_LOG_LOCATION to C:\Oracle\MiddlewareEM\oms11g\cfgtoollogs\cfgfw
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_LOG_LOCATION is C:\Oracle\MiddlewareEM\oms11g\sysman\log\schemamanager\m_082510_1057_PM\m_082510_1057_PM.CREATE\
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Trying to set RCU_LOG_NAME to emmds.log
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU_LOG_NAME is rcu.log
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Prepare to initialize RCU
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : RCU initialized with parameters : -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
2010_08_25_AD_23_11_09_IST EMMDSSchemaManager: Info : Start rewriting mds.xml
2010_08_25_AD_23_11_09_IST removePrereqFromMDS : mdsComp.xml[C:\Oracle\MiddlewareEM\oms11g\rcu\integration\mds\mdsComp.xml]
2010_08_25_AD_23_11_09_IST removePrereqFromMDS : mds.xml[C:\Oracle\MiddlewareEM\oms11g\rcu\integration\mds\mds.xml]
2010_08_25_AD_23_11_10_IST EMMDSSchemaManager: Info : Finish rewriting mds.xml
2010_08_25_AD_23_11_10_IST EMMDSSchemaManager: Info : Invoking RCU
2010_08_25_AD_23_11_12_IST ERROR:MDSoracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
2010_08_25_AD_23_11_12_IST Parameters are: -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
emmdscreate.err+
ERROR:MDSoracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
oracle.sysman.assistants.rcu.backend.RCUExecutionException: RCU-6090:Skipping Main operation: Failed in Connection step validation
     at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:129)
     at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:268)
     at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:324)
     at oracle.sysman.emdrep.mds.EMMDSSchemaManager.perform(EMMDSSchemaManager.java:230)
     at oracle.sysman.emcp.oms.MDSSchemaConfiguration.perform(MDSSchemaConfiguration.java:66)
     at oracle.sysman.emcp.oms.BaseConfiguration.invoke(BaseConfiguration.java:151)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
Parameters are: -silent -createRepository -compInfoXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\ComponentInfo.xml -storageXMLLocation C:\Oracle\MiddlewareEM\oms11g\sysman\emdrep\config\mds\Storage.xml -connectString (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=WXP-56M33BS.hyd.amer.dell.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl11g))) -dbUser SYS -dbRole sysdba -schemaPrefix SYSMAN -component MDS
Request help as I am unable to proceed further from here :-(
Edited by: user8915544 on Aug 25, 2010 11:31 AM

... find some other problems regarding RCU-6090...
Re: OID 11g installation problem: service name/tnsnames.ora ok?
There are some suggestions with the global name in the connection descriptor....
TNS name WXP-56M33BS.hyd.amer.dell.com
maybe try IP / localhost or hostname....in the tnsnames
nothing more than a suggestion....
*T

WCF - Getting the "The authentication schemes configured on the host ('Anonymous') ....." error

"The authentication schemes configured on the host ('Anonymous') do not allow those configured on the binding 'BasicHttpBinding' ('Ntlm'). "
I am brand new to WCF and services in general. I have turned on the basic, windows & digest auth modes in my iis express.
One thing I just noticed in my iis express config file, I had turned on basic auth in the "turn of windows stuff" in the task manager then rebooted, but I just opened the applicationhost.config file on my machine and saw this:
<authentication>
<anonymousAuthentication enabled="true" userName="" />
<basicAuthentication enabled="false" />
shouldn't that basicAuthentication read as true?
I was given this existing project to make some changes to, but I cant even get it to run on my machine, so I'm assuming something is up with my local iis express settings.
This project has 3 services in it. Here is a partial of the webConfig:
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IDataMaintenanceService" maxBufferSize="2147483647" maxReceivedMessageSize ="2147483647" maxBufferPoolSize="2147483647" >
<readerQuotas maxDepth="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647" maxStringContentLength="2147483647"/>
<security mode="TransportCredentialOnly" >
<transport clientCredentialType="Ntlm"/>
</security>
</binding>
<binding name="BasicHttpBinding_IYearEndProcessingService" maxBufferSize="2147483647" maxReceivedMessageSize ="2147483647" maxBufferPoolSize="2147483647" >
<readerQuotas maxDepth="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647"
maxNameTableCharCount="2147483647" maxStringContentLength="2147483647"/>
<security mode="TransportCredentialOnly" >
<transport clientCredentialType="Ntlm"/>
</security>
</binding>
Simon.

Hi battlFrog,
Well Done!
I am very glad that you have solved your problem by yourself.
If you have any others problem, welcome to post it in this forum.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

12c Cloud Control Install : plug-in MDS Schema Configuration has failed its

Anyone,
I am trying to install Oracle 12c Cloud Control (CC). I am installing this product on the
same server (a VM) as the database.
Some basic information ( a repeat of above):
Platform OS:
uname -aLinux slc02itk 2.6.18-308.0.0.0.1.el5xen #1 SMP Sat Feb 25 16:26:29 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
Database Software:
SYS@OTMDX07>select banner from v$version ;
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.0.1 - 64bit Beta
PL/SQL Release 12.1.0.0.1 - Beta
CORE 12.1.0.0.1 Beta
TNS for Linux: Version 12.1.0.0.1 - Beta
NLSRTL Version 12.1.0.0.1 - Beta
Cloud Control Software:
Software obtained from here:
http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Linux x86-64 (With Bundle Patch 1)
I have successfully installed the CC software and am having problems with the configuration.
I am running this command:
/u01/app/oracle/middleware/oms/sysman/install/ConfigureGC.sh
In the linux window I get the following feedback. Note the "divide by zero" error.
Does anyone know what causes this, and better yet, how to avoid it?
Percent Complete: 50
Percent Complete: 100
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=slc02itk)(PORT=1521)))(CONNECT_DATA=(SID=OTMDX07)))
Connected As : SYS
Prefix for (prefixable) Schema Owners : SYSMAN
RCU Logfile : /u01/app/oracle/middleware/oms/sysman/log/schemamanager/m_061212_0546_AM/m_061212_0546_AM.CREATE/rcu.log
Component schemas created:
Component Status Logfile
Authorization Policy Manager Success /u01/app/oracle/middleware/oms/sysman/log/schemamanager/m_061212_0546_AM/m_061212_0546_AM.CREATE/apm.log
Repository Creation Utility - Create : Operation Completed
Repository Creation Utility - Dropping and Cleanup of the failed components
Repository Dropping and Cleanup of the failed components in progress.
2012-06-12 06:01:50,448 [Thread-45] ERROR - createRepository failed with following error:
java.lang.ArithmeticException: / by zero
at oracle.sysman.assistants.rcu.backend.SilentProgressor.progress(SilentProgressor.java:58)
at oracle.sysman.assistants.rcu.backend.RCUModel.cleanUp(RCUModel.java:605)
at oracle.sysman.assistants.rcu.backend.SilentRCUModel.showCompletionMessage(SilentRCUModel.java:245)
at oracle.sysman.assistants.rcu.backend.RCUModel.executeTasks(RCUModel.java:449)
at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:224)
at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:327)
at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:335)
at oracle.sysman.emdrep.opss.EMSecuritySchemaManager.perform(EMSecuritySchemaManager.java:317)
at oracle.sysman.oms.MDSSchemaConfiguration.perform(MDSSchemaConfiguration.java:186)
at oracle.sysman.oms.BaseConfiguration.invoke(BaseConfiguration.java:192)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
/u01/app/oracle/middleware/oms/sysman/log/schemamanager/m_061212_0546_AM/m_061212_0546_AM.CREATE/rcu.log
In one of the log files generated:
/u01/app/oracle/middleware/oms/cfgtoollogs/cfgfw/CfmLogger_2012-06-12_05-45-08-AM.log
I see the following messages. The messages say "INFO", but they may as well be "FATAL" because the installation
or configuration cannot continue. I believe the failure lies in the creation of the "SYSMAN_OPSS" user.
NFO: oracle.sysman.top.oms:__________________________DUMPING PARAMETERS______________________________________________
INFO: oracle.sysman.top.oms:OracleHome: /u01/app/oracle/middleware/oms
INFO: oracle.sysman.top.oms:Connect String: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=slc02itk)(PORT=1521)))(CONNECT_DATA=(SID=OTMDX07)))
INFO: oracle.sysman.top.oms:SYS User: SYS
INFO: oracle.sysman.top.oms:________________________________________________________________________
INFO: oracle.sysman.top.oms:MDS Schema Creation status: COMPLETED
INFO: oracle.sysman.top.oms:MDS Schema Creation is successful
INFO: oracle.sysman.top.oms:_______________________________________________________________________
INFO: oracle.sysman.top.oms:Starting opss Schema Creation.
INFO: oracle.sysman.top.oms:Failed to create OPSS schema
INFO: oracle.sysman.top.oms:_______________________________________________________________________
INFO: oracle.sysman.top.oms:Starting APM Schema Creation.
INFO: oracle.sysman.top.oms:Failed to create APM schema
INFO: oracle.sysman.top.oms:The plug-in MDS Schema Configuration has failed its perform method
Here I show that the "other" users get created with their objects.
1* select owner, count(*) from dba_objects where owner like 'SYSMAN%' group by owner
SYS@OTMDX07>/
OWNER COUNT(*)
SYSMAN_RO 847
SYSMAN_MDS 60
SYSMAN 11174
SYSMAN_APM 211
SYS@OTMDX07>
1* select tablespace_name, file_name from dba_data_files where tablespace_name like 'M%'
SYS@OTMDX07>/
TABLESPACE_NAME FILE_NAME
MGMT_ECM_DEPOT_TS /u02/oradata/OTMDX07/mgmt_ecm_depot1.dbf
MGMT_TABLESPACE /u02/oradata/OTMDX07/mgmt.dbf
MGMT_AD4J_TS /u02/oradata/OTMDX07/mgmt_ad4j.dbf
Repository Creation Utility: Create - Completion Summary
Database details:
Connect Descriptor : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=slc02itk)(PORT=1521)))(CONNECT_DATA=(SID=OTMDX07)))
Connected As : SYS
Prefix for (prefixable) Schema Owners : SYSMAN
RCU Logfile : /u01/app/oracle/middleware/oms/sysman/log/schemamanager/m_061212_0546_AM/m_061212_0546_AM.CREATE/rcu.log
Component schemas created:
Component Status Logfile
Authorization Policy Manager Success /u01/app/oracle/middleware/oms/sysman/log/schemamanager/m_061212_0546_AM/m_061212_0546_AM.CREATE/apm.log
For complete disclosure, the Enterprise Manager prerequisite checks yielded these findings:
id_check_session_cached_cursors_param ==> fail
id_check_open_cursors_param ==> fail
But I think the check is wrong. I do not understand why the check fails on only these initialization parameters:
1* select name, value from v$parameter where name in ('session_cached_cursors','open_cursors')
SYS@OTMDX07>/
NAME VALUE
session_cached_cursors 1000
open_cursors 1000
Any insight is greatly appreciated.
John

John,
I note that your database version is 12.1.0.0.1 - 64bit Beta, which is not certified for EM 12c. This may have something to do with the repository creation failure. Can you try using a certified database version (e.g. 11.2.0.2 or 11.2.0.3) to host the EM 12c repository?
Regards,
- Loc

OMB script to remove DBLink and Schema configuration from mapping

In OWB903 we have used prefixes for most of our tables used in mappings. (By right clicking on the mapping, choosing configure and then setting the Schema/DB Link for each table under "Sources and Targets")
We are now in the process of upgrading to OWB 904, and because of the way OWB 904 handles locations we would like to remove the prefixes from the mapping configurations. Our project consists of 100+ mappings, so it would be nice if it was possible to do this by runing a OMB script.
I would appreciate it very much if anybody can come up with an example of how to do this.

Roald,
Here is an example of a OMB script that renames all the tables in a project (to run a script, you have to open the OMBPlus application and enter 'source <filename>' on the prompt, where filename is the name of the file containing the script):
# rename.tcl
# Renames the names of tables, mappings, cubes and dimension for a project.
# Prefixes the names with 'WH_'
# Please update the connection information here.
# The connect string format is repository_user/repository_pwd@hostname:port:service_name
# Connecting to the repository:
OMBCONNECT owb904/owb904@localhost:1521:ora9201
puts "Connected to repository."
# Setting the project and prefix variables (set project name here):
set MProject MY_PROJECT
set wh WH_
#Open the project
# Entering into the Project (CC = Changing Context):
OMBCC '$MProject'
set module_list [OMBLIST ORACLE_MODULES]
# Loop to enter into each project module:
     foreach i in {$module_list}{
          puts "Working on module: $module_list ."
          OMBCC '$module_list'
          set table_list [OMBLIST TABLES]
# Loop to prefix the name of each table in the current module:
               foreach j in {$table_list}{
                    puts "     Working on table: $table_list ."
                    OMBALTER TABLE '$j'
                         RENAME TO '$wh$j'
puts "Done."
# Saving the changes:
OMBCOMMIT
# Disconnecting from the repository:
OMBDISCONNECT
As you know, OMBPlus is based on the TCL scripting language. For more info on TCL, take a look at:
http://www.scriptics.com
Also, for more info on the OWB specific commands, take a look at the Users guide.
Regards:
Igor

Changing existing schemas configured when the environment is running fine

Hi Masters,
Consider an Essbase server (11.2.1.4) which is running fine with some essbase applications and now I need to change the schemas on which the foundation and EAS are running.
Can we do that and what could be the impact on running essbase applications?
Thanks,
Siva

Hi John,
I have gone through the docs referred and followed the steps, At the shared services DB configuration segment, I just gave the new schema/ password and clicked on Next button.... there its throwing an error "EPMCFG:10372: The database doesn't contain Shared Services information".
Any tricks?
Thanks,
Siva

Daily wage schemas configuration

hi,
Can any body help me how to configure the schemas for daily wages.......very urgent and your help needed.

Dear Aniket,
I also have a similar scenerio. Like we have daily wage employees for our client. For example if the daily wage employee is paid Rs. 100 per day and he is present for 20 days in a particular month. If we enter Rs.100 in Infotype 0008 as Basic pay daily, the system has to calculate for the number of days present and pay the employee. How can this be configured.
Your help would be of great consideration.
Thanks in advance.
Vijay

BPEL Database Schema Configuration

Hi,
Where do i find BPEL database schema information? Please let me know. I use SOA Suite 10.1.3
How can we find out what schema we are hitting for the BPEL instance ??
Regards,
Pradeep
Edited by: pradeepr25 on Mar 11, 2010 10:45 PM

Hi Pradeep,
You can find the exact details of the schema creation etc in the sql file invoked from the soa_schemas\irca\irca.sh (irca.bat) from the install folders of SOA Suite.
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28980/appendixa.htm#CHDBIGIA
In case you want to see the connection details for your install, they would be in data-sources.xml file under $ORACLE_HOME/j2ee/oc4j_soa/config directory.
Regards,
Shanmu.
http://www.prshanmu.com/articles/

Configuring Multiple Schemas in Oracle ADF application

Hi,
Thanks all for the replies for my previous posts :-)
We have a requirement in which we need to configure our application for multiple Database schema. At runtime based upon the logged in user we need to get data from the schema related to that user.
These schema may be on same Database instance/server or may be on different DB servers.
The requirement is like this
Logged in User DB schema configured
"A" ASchema @ 127.0.0.1
"B" BSchema @ 127.0.0.2
"C" ASchema @ 127.0.0.1
"D" Dschema @ 127.0.0.2
based on the User login (which is happening through one OID system), I need to fetch data from different schema (configured for different application).
These schema have different set of tables but set of table we require for our application are of same structure.
Same structure means same Table names with same relations.
Please let me know can we do the same in Oracle ADF application and How?_
One more requirement is that if i add a user at runtime and configure the DB schema for this user, All data related to this users will be loaded from this Schema which is configured for this user.
Thanks in Advance,
Amit
newbie to Oracle ADF
Edited by: ur.amit on May 10, 2010 3:17 PM

You can try the below example to change database at run time.
in the filter change the connection and not the credentials
http://www.oracle.com/technetwork/developer-tools/jdev/dynamicjdbchowto-101755.html#03.
Most of the other part is done to handle state management tables, which you might also have to do unless you use a file passivation store or if its ok to passivate to a single database always.
If its ok to passivate to a single db always. Hard code the jbo.server.internal_connection in the AM configurations to a DB jndi name.
Adf allows you to activate and passivate to a different database other than what you are connected to get and put data.

Error while running OBIA configuration configApps.bat

I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...

The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

Payment Scheme Error--

Hi ALL,
I am doing Payment Scheme configuration, while creation of payment scheme i am getting the following error message:
Tax jurisdiction code is not permitted for payment scheme procedure
Message no. EPS117
Could you please help me....
Thanks,
KK

Hi,
we all ready maintained tax jurisdiction at connection object & BP level.
could you give me is there any other configuration settings involved this area...
Thank,
KK

How to create an database account authentication scheme in apex

Dear
I have an apex installation (embeded) on oracle 11g.
I want to create a database account authentication scheme in apex. I have seen the page with different tab like name,subsription,source,session not valid, login processing, logout URL,session cookie attributes and comments.
I want to know what are the things to be specifed on these tabs and the effects. I have gone thru the documentation 'Application Builder User’s Guide Release 4.1' , but the functionalities of these tabs are not mentioned.
Please help.
Dennis
Edited by: Dennis John on Feb 28, 2012 10:57 PM

Thanks to dear Jit
I am new to apex.
I have gone thru that documents but I couldn't find any detailed documentation about the database account authentication scheme configuration
The database account authentication scheme creation interface will show tabs like name,subsription,source,session not valid, login processing, logout URL,session cookie attributes and comments.
I want to know what are the things to be specifed on these tabs and how it will reflect in the login. The specified documentation is not giving any detail about the above mentioned tabs of authentication scheme creation iwizard.
And also I want to know how the applciation user will be mapped to the database account?
As per my understanding a database user (for each run time user) is required for to authenticate the apex run time login other than the applciation schema user (holds the objects of applicaiton)
run time user means - end user who uses the applcaition, not the developer.
Please help.
Dennis

Schema configuration

Similar Messages

Maybe you are looking for